SEARCH · Search NASA
Results for “PROCESS SOLUTIONS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tin and germanium monochalcogenide IV–VI semiconductor nanocrystals for use in solar cells
Explore the source record for details and available documents.
Furan Substituted Diketopyrrolopyrrole and Thienylenevinylene Based Low Band Gap Copolymer for High Mobility Organic Thin Film Transistors
A novel solution processable donor-acceptor (D-A) based low band gap polymer semiconductor poly{l_brace}3,6-difuran-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-thienylenevinylene{r_brace} (PDPPF-TVT), was designed and synthesized by a Pd-catalyzed Stille coupling route. An electron deficient furan based diketopyrrolopyrrole (DPP) block and electron rich thienylenevinylene (TVT) donor moiety were attached alternately in the polymer backbone. The polymer exhibited good solubility, film forming ability and thermal stability. The polymer exhibits wide absorption bands from 400 nm to 950 nm (UV-vis-NIR region) with absorption maximum centered at 782 nm in thin film. The optical band gap (E{sub g}{sup opt}) calculated from the polymer film absorption onset is around 1.37 eV. The {pi}-energy band level (ionization potential) calculated by photoelectron spectroscopy in air (PESA) for PDPPF-TVT is around 5.22 eV. AFM and TEM analyses of the polymer reveal nodular terrace morphology with optimized crystallinity after 200 C thermal annealing. This polymer exhibits p-channel charge transport characteristics when used as the active semiconductor in organic thin-film transistor (OTFT) devices. The highest hole mobility of 0.13 cm{sup 2} V{sup -1} s{sup -1} is achieved in bottom gate and top-contact OTFT devices with on/off ratios in the range of 10{sup 6}-10{sup 7}. This work reveals that the replacement of thiophene by furan in DPP copolymers exhibits such a high mobility, which makes DPP furan a promising block for making a wide range of promising polymer semiconductors for broad applications in organic electronics.
High-Performance Organic Field-Effect Transistors with Dielectric and Active Layers Printed Sequentially by Ultrasonic Spraying
High-performance, flexible organic field-effect transistors (OFETs) are reported with PVP dielectric and TIPS-PEN active layers sequentially deposited by ultrasonic spray-coating on plastic substrate. OFETs fabricated in ambient air with a bottom-gate/top-contact geometry are shown to achieve on/off ratios of >104 and mobilities as high as 0.35 cm2/Vs. These rival the characteristics of the best solution-processible small molecule FETs fabricated by other fabrication methods such as drop casting and ink-jet printing.
Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers
Organolead trihalide perovskites (OTPs) are nature abundant materials with prospects as future low-cost renewable energy sources boosted by the solution process capability of these materials. Here we report the fabrication of efficient OTP devices by a simple, high throughput and low-cost doctor-blade coating process which can be compatible with the roll-to-roll fabrication process for the large scale production of perovskite solar cell panels. The formulation of appropriate precursor inks by removing impurities is shown to be critical in the formation of continuous, pin-hole free and phase-pure perovskite films on large area substrates, which is assisted by a high deposition temperature to guide the nucleation and grain growth process. The domain size reached 80–250 μm in 1.5–2 μm thick bladed films. By controlling the stoichiometry and thickness of the OTP films, highest device efficiencies of 12.8% and 15.1% are achieved in the devices fabricated on poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and cross-linked N4,N4'-bis(4-(6-((3-ethyloxetan-3-yl)methoxy)hexyl)phenyl)–N4,N4'-diphenylbiphenyl-4,4'-diamine covered ITO substrates. Furthermore, the carrier diffusion length in doctor-bladed OTP films is beyond 3.5 μm which is significantly larger than in the spin-coated films, due to the formation of crystalline grains with a very large size by the doctor-blade coating method.
Tunable electrical conductivity in oriented thin films of tetrathiafulvalene-based covalent organic framework
Despite the high charge-carrier mobility in covalent organic frameworks (COFs), the low intrinsic conductivity and poor solution processability still impose a great challenge for their applications in flexible electronics. We report the growth of oriented thin films of a tetrathiafulvalene-based COF (TTF-COF) and its tunable doping. The porous structure of the crystalline TTF-COF thin film allows the diffusion of dopants such as I-2 and tetracyanoquinodimethane (TCNQ) for redox reactions, while the closely packed 2D grid sheets facilitate the cross-layer delocalization of thus-formed TTF radical cations to generate more conductive mixed-valence TTF species, as is verified by UV-vis-NIR and electron paramagnetic resonance spectra. Conductivity as high as 0.28 S m(-1) is observed for the doped COF thin films, which is three orders of magnitude higher than that of the pristine film and is among the highest for COF materials.
High open-circuit voltage small-molecule p-DTS(FBTTh 2 ) 2 .ICBA bulk heterojunction solar cells – morphology, excited-state dynamics, and photovoltaic performance
The photovoltaic performance of bulk heterojunction solar cells using the solution-processable small molecule donor 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole) (p-DTS(FBTTh 2 ) 2 in combination with indene-C60 bis-adduct (ICBA) as an acceptor is systematically optimized by altering the processing conditions. A high open-circuit voltage of 1 V, more than 0.2 V higher than that of a p-DTS(FBTTh 2 ) 2 :PC 70 BM blend, is achieved. However, the power conversion efficiency remains around 5% and thus is lower than ~8% previously reported for p-DTS(FBTTh 2 ) 2 :PC 70 BM. Transient absorption (TA) pump–probe spectroscopy over a wide spectral (Vis-NIR) and dynamic (fs to μs) range in combination with multivariate curve resolution analysis of the TA data reveals that generation of free charges is more efficient in the blend with PC 70 BM as an acceptor. In contrast, blends with ICBA create more coulombically bound interfacial charge transfer (CT) states, which recombine on the sub-nanosecond timescale by geminate recombination. Furthermore, the ns to μs charge carrier dynamics in p-DTS(FBTTh 2 ) 2 :ICBA blends are only weakly intensity dependent implying a significant contribution of recombination from long-lived CT states and trapped charges, while those in p-DTS(FBTTh 2 ) 2 :PC 70 BM decay via an intensity-dependent recombination mechanism indicating that spatially separated (free) charge carriers are observed, which can be extracted as photocurrent from the device.
Phase transition kinetics and surface binding states of methylammonium lead iodide perovskite
We have presented a detailed analysis of phase transition kinetics and binding energy states of solution processed methylammonium lead iodide (MAPbI3) thin films prepared at ambient conditions and annealed at different elevated temperatures. The processing temperature and environmental conditions predominantly control the crystal structure and surface morphology of MAPbI3 thin films. The structural transformation from tetragonal to cubic occurs at 60C for 30 minutes annealing time while 10 minutes annelaed films posses tetragonal structure. The transformed phase is greatly intact even at higher annealing temperature of 150 C and time of 2 hours. Existence of charge transfer interaction between Pb 4f and I 3d oxidation states is quantified by the XPS spin orbit spilitting.
Molecular-ink route to 13.0% efficient low-bandgap CuIn(S,Se) 2 and 14.7% efficient Cu(In,Ga)(S,Se) 2 solar cells
A stable dimethyl sulfoxide (DMSO)-based ink containing a copper–thiourea–chloride complex and an indium–DMSO–chloride complex leads to 13.0% efficient CuIn(S,Se)2 (CIS) solar cells, which is a record for solution processed CIS. The formation of these complexes was found critical to control oxidation states and loss of metals during processing and to tailor the final composition of the absorber.
The impact of lignin source on its self-assembly in solution
Recently, there has been a growing interest in developing value added uses for lignin, including the utilization of lignins as a precursor for carbon materials. Proper understanding of the association behavior of lignins during solution processing provides important structural information that is needed to rationally optimize the use of lignins in industry in a range of value added applications. In this paper, we follow the assembly of lignin molecules from a variety of sources in dimethyl sulfoxide, a good solvent for lignins, using small angle neutron scattering. In order to mimic industrial processing conditions, concentrations of lignins were kept above the overlap concentration. At small length scales, short lignin segments with ~4–10 monolignol units associate to form rigid rod-like/cylindrical building blocks, where the number of repeat units in a cylindrical segment decreases with increasing lignin concentration. These cylindrical building blocks associate to form aggregates with low cross-linking densities and a random coil or network like structures from highly branched lignin structures. The degree of branching of the base lignin molecule, which varies with source, plays a crucial role in determining their association behavior. Finally, the overall sizes of the aggregates decrease with increasing concentration at low cross-linking densities, whereas the opposite trend is observed for highly branched lignins.
Integrating theory, synthesis, spectroscopy and device efficiency to design and characterize donor materials for organic photovoltaics: a case study including 12 donors
There have been remarkable improvements in the power conversion efficiency of solution-processable Organic Photovoltaics (OPV) have largely been driven by the development of novel narrow bandgap copolymer donors comprising an electron-donating (D) and an electron-withdrawing (A) group within the repeat unit. The large pool of potential D and A units and the laborious processes of chemical synthesis and device optimization, has made progress on new high efficiency materials slow with a few new efficient copolymers reported every year despite the large number of groups pursuing these materials. In our paper we present an integrated approach toward new narrow bandgap copolymers that uses theory to guide the selection of materials to be synthesized based on their predicted energy levels, and time-resolved microwave conductivity (TRMC) to select the best-performing copolymer–fullerene bulk heterojunction to be incorporated into complete OPV devices. We validate our methodology by using a diverse group of 12 copolymers, including new and literature materials, to demonstrate good correlation between (a) theoretically determined energy levels of polymers and experimentally determined ionization energies and electron affinities and (b) photoconductance, measured by TRMC, and OPV device performance. The materials used here also allow us to explore whether further copolymer design rules need to be incorporated into our methodology for materials selection. For example, we explore the effect of the enthalpy change (ΔH) during exciton dissociation on the efficiency of free charge carrier generation and device efficiency and find that ΔH of -0.4 eV is sufficient for efficient charge generation.
Simultaneous cross-linking and p-doping of a polymeric semiconductor film by immersion into a phosphomolybdic acid solution for use in organic solar cells
Poly[ N -9'-heptadecanyl-2,7-carbazole- alt -5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) is shown to be simultaneously cross-linked and p-doped when immersed into a phosphomolybdic acid solution, yielding conductive films with low solubility that can withstand the solution processing of subsequent photoactive layers. Furthermore, such a modified PCDTBT film serves to improve hole collection and limit carrier recombination in organic solar cells.
Low temperature synthesis of hierarchical TiO 2 nanostructures for high performance perovskite solar cells by pulsed laser deposition
A promising way to advance perovskite solar cells is to improve the quality of the electron transport material e.g., titanium dioxide (TiO 2 ) in a direction that increases electron transport and extraction. Although dense TiO 2 films are easily grown in solution, efficient electron extraction suffers due to a lack of interfacial contact area with the perovskite. Conversely, mesoporous films do offer high surface-area-to-volume ratios, thereby promoting efficient electron extraction, but their morphology is relatively difficult to control via conventional solution synthesis methods. Here, a pulsed laser deposition method was used to assemble TiO 2 nanoparticles into TiO 2 hierarchical nanoarchitectures having the anatase crystal structure, and prototype solar cells employing these structures yielded power conversion efficiencies of ~ 14%. Our approach demonstrates a way to grow high aspect-ratio TiO 2 nanostructures for improved interfacial contact between TiO 2 and perovskite materials, leading to high electron-hole pair separation and electron extraction efficiencies for superior photovoltaic performance. In addition, compared to conventional solution-processed TiO 2 films that require 500 °C to obtain a good crystallinity, our relatively low temperature (300 °C) TiO 2 processing method may promote reduced energy-consumption during device fabrication as well as enable compatibility with various flexible polymer substrates.
Highly crystalline Zn 2 SnO 4 nanoparticles as efficient electron-transporting layers toward stable inverted and flexible conventional perovskite solar cells
In this paper, we have successfully utilized a facile hydrothermal method to prepare crystalline Zn 2 SnO 4 nanoparticles (ZSO NPs) and applied them as an efficient electron-transporting layer (ETL) via a simple room-temperature solution process for perovskite solar cells (PVSCs). The superior semiconducting properties of this ZSO-based ETL enable an efficient (PCE: 17.7%) inverted p–i–n PVSC to be fabricated with respectable ambient stability. It can retain over 90% of its original PCE after being stored under ambient conditions for 14 days under 30 ± 5% relative humidity. Moreover, it also facilitates the fabrication of efficient conventional n–i–p PVSCs with a PCE of –14.5% and –11.4% achieved on a glass/ITO rigid substrate and PEG/ITO flexible substrate, respectively.
Donor–acceptor polymers with tunable infrared photoresponse
Donor–acceptor (DA) conjugated polymers provide an important platform for the development of solution-processed optoelectronic devices. The complex interrelation between electronic properties and conformational disorder in these materials complicates the identification of design guidelines to control the bandgap at low energies, limiting the design of new optoelectronic and device functionalities. Here, we demonstrate that DA polymers comprised of exocyclic olefin substituted cyclopentadithiophene donors, in combination with conventional electron acceptors, display very narrow optical bandgaps (1.2 > E opt g > 0.7 eV) and primary photoexcitations extending into the shortwave infrared. Theoretical calculations reveal fundamental structure–property relationships toward bandgap and energy level control in these spectral regions. Bulk heterojunction photodiodes fabricated using these new materials demonstrate a detectivity (D*) of > 10 11 Jones within a spectral range of 0.6–1.43 μm and measurable D* to 1.8 μm, the longest reported to date for conjugated polymer based systems.
Pushing up the efficiency of planar perovskite solar cells to 18.2% with organic small molecules as the electron transport layer
We demonstrate metal-oxide-free solution-processed inverted PSCs using sulfur-containing azaacene TDTP as the ETL with a PCE of ~18.2%.
Molecular Blends of Methylated-Poly(ethylenimine) and Amorphous Porous Organic Cages for SO 2 Adsorption
Porous organic cages (POCs) are emerging porous materials that exhibit intriguing properties in the areas of self-assembly, host-guest interaction, and solution processability. Here in this work, we explore the applicability of POCs as molecular porous supports for polymeric amines. We find that primary amines in poly(ethylenimine) (PEI) can undergo metathesis with the imine bonds present in POCs, resulting in non-porous products. This problem can be overcome by transforming the primary amines in PEI to tertiary amines via methylation. The methylated PEI (mPEI) forms homogeneous composites with amorphous scrambled porous organic cages (ASPOCs) without undesired reactions or phase separation. The microscopic structure of the composites is studied using molecular dynamics simulations. Finally, these composite materials are evaluated as adsorbents for low concentration SO2 (200 ppm) adsorption and show good thermal and cyclic stability.
Evidence of a magnetic transition in atomically thin Cr 2 TiC 2 T x MXene
Two-dimensional (2D) transition metal carbides and nitrides known as MXenes have shown attractive functionalities such as high electronic conductivity, a wide range of optical properties, versatile transition metal and surface chemistry, and solution processability. Although extensively studied computationally, the magnetic properties of this large family of 2D materials await experimental exploration. 2D magnetic materials have recently attracted significant interest as model systems to understand low-dimensional magnetism and for potential spintronic applications. Here, we report on synthesis of Cr 2 TiC 2 T x MXene and a detailed study of its magnetic as well as electronic properties. Using a combination of magnetometry, synchrotron X-ray linear dichroism, and field- and angular-dependent magnetoresistance measurements, we find clear evidence of a magnetic transition in Cr 2 TiC 2 T x at approximately 30 K, which is not present in its bulk layered carbide counterpart (Cr 2 TiAlC 2 MAX phase). Overall, this work presents the first experimental evidence of a magnetic transition in a MXene material and provides an exciting opportunity to explore magnetism in this large family of 2D materials.