Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parallel processors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Optimization of processor allocation for domain decomposed Monte Carlo calculations

Load imbalance plagues domain decomposed Monte Carlo calculations when sources are not uniform. Parallel efficiency for domain decomposed Monte Carlo transport calculations improves through a nonuniform allocation of processors over subdomains. In this work, we optimize the allocation with runtime diagnostics collected during a calibration step, then complete the full calculation. The diagnostic-based approach is compared to implicit filtering, an optimization algorithm for bound constrained noisy optimization problems. Finally, we consider both forward and hybrid radiation transport calculations to measure performance.

97 MATHEMATICS AND COMPUTING↗

Three-dimensional radiative transfer on a massively parallel computer

We perform 3D radiative transfer calculations in non-local thermodynamic equilibrium (NLTE) in the simple two-level atom approximation on the Mas-Par MP-1, which contains 8192 processors and is a single instruction multiple data (SIMD) machine, an example of the new generation of massively parallel computers. On such a machine, all processors execute the same command at a given time, but on different data. To make radiative transfer calculations efficient, we must re-consider the numerical methods and storage of data. To solve the transfer equation, we adopt the short characteristic method and examine different acceleration methods to obtain the source function. We use the ALI method and test local and non-local operators. Furthermore, we compare the Ng and the orthomin methods of acceleration. We also investigate the use of multi-grid methods to get fast solutions for the NLTE case. In order to test these numerical methods, we apply them to two problems with and without periodic boundary conditions.

Vath, H. M.↗

On the impact of communication complexity in the design of parallel numerical algorithms

This paper describes two models of the cost of data movement in parallel numerical algorithms. One model is a generalization of an approach due to Hockney, and is suitable for shared memory multiprocessors where each processor has vector capabilities. The other model is applicable to highly parallel nonshared memory MIMD systems. In the second model, algorithm performance is characterized in terms of the communication network design. Techniques used in VLSI complexity theory are also brought in, and algorithm independent upper bounds on system performance are derived for several problems that are important to scientific computation.

Gannon, D.↗

On the impact of communication complexity on the design of parallel numerical algorithms

This paper describes two models of the cost of data movement in parallel numerical alorithms. One model is a generalization of an approach due to Hockney, and is suitable for shared memory multiprocessors where each processor has vector capabilities. The other model is applicable to highly parallel nonshared memory MIMD systems. In this second model, algorithm performance is characterized in terms of the communication network design. Techniques used in VLSI complexity theory are also brought in, and algorithm-independent upper bounds on system performance are derived for several problems that are important to scientific computation.

Gannon, D. B.↗

Parallelization of the Red-Black Algorithm on Solving the Second-Order PN Transport Equation with the Hybrid Finite Element Method

The Red-Black algorithm has been successfully applied on solving the second-order parity transport equation with the PN approximation in angle and the Hybrid Finite Element Method (HFEM) in space, i.e., the Variational Nodal Method (VNM) [1,2,3,4,5]. Any transport solving techniques, including the Red-Black algorithm, need to be parallelized in order to take the advantage of the development of supercomputers with multiple processors for the advanced modeling and simulation. To our knowledge, an attempt [6] was done to parallelize it, but it was devoted only to the z axis plans in three-dimensional calculations. General parallelization of the Red-Black algorithm with the spatial domain decomposition has not been reported in the literature. In this summary, we present our implementation of the parallelization of the Red-Black algorithm and its efficiency results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Parallel simulated annealing algorithms for cell placement on hypercube multiprocessors

Two parallel algorithms for standard cell placement using simulated annealing are developed to run on distributed-memory message-passing hypercube multiprocessors. The cells can be mapped in a two-dimensional area of a chip onto processors in an n-dimensional hypercube in two ways, such that both small and large cell exchange and displacement moves can be applied. The computation of the cost function in parallel among all the processors in the hypercube is described, along with a distributed data structure that needs to be stored in the hypercube to support the parallel cost evaluation. A novel tree broadcasting strategy is used extensively for updating cell locations in the parallel environment. A dynamic parallel annealing schedule estimates the errors due to interacting parallel moves and adapts the rate of synchronization automatically. Two novel approaches in controlling error in parallel algorithms are described: heuristic cell coloring and adaptive sequence control.

Banerjee, Prithviraj↗

Modula-2*: An extension of Modula-2 for highly parallel programs

Parallel programs should be machine-independent, i.e., independent of properties that are likely to differ from one parallel computer to the next. Extensions are described of Modula-2 for writing highly parallel, portable programs meeting these requirements. The extensions are: synchronous and asynchronous forms of forall statement; and control of the allocation of data to processors. Sample programs written with the extensions demonstrate the clarity of parallel programs when machine-dependent details are omitted. The principles of efficiently implementing the extensions on SIMD, MIMD, and MSIMD machines are discussed. The extensions are small enough to be integrated easily into other imperative languages.

Tichy, Walter F.↗

MPI-hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

This work studies the performance and scalability characteristics of"hybrid'" parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

97 MATHEMATICS AND COMPUTING↗

Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

This work studies the performance and scalability characteristics of"hybrid'"parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

97 MATHEMATICS AND COMPUTING↗

Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

This work studies the performance and scalability characteristics of"hybrid" parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

97 MATHEMATICS AND COMPUTING↗

Massively parallel electrical conductivity imaging of the subsurface: Applications to hydrocarbon exploration

Three-dimensional (3D) geophysical imaging is now receiving considerable attention for electrical conductivity mapping of potential offshore oil and gas reservoirs. The imaging technology employs controlled source electromagnetic (CSEM) and magnetotelluric (MT) fields and treats geological media exhibiting transverse anisotropy. Moreover when combined with established seismic methods, direct imaging of reservoir fluids is possible. Because of the size of the 3D conductivity imaging problem, strategies are required exploiting computational parallelism and optimal meshing. The algorithm thus developed has been shown to scale to tens of thousands of processors. In one imaging experiment, 32,768 tasks/processors on the IBM Watson Research Blue Gene/L supercomputer were successfully utilized. Over a 24 hour period we were able to image a large scale field data set that previously required over four months of processing time on distributed clusters based on Intel or AMD processors utilizing 1024 tasks on an InfiniBand fabric. Electrical conductivity imaging using massively parallel computational resources produces results that cannot be obtained otherwise and are consistent with timeframes required for practical exploration problems.

54 ENVIRONMENTAL SCIENCES↗

Parallel computation of geometry control in adaptive truss structures

The fast computation of geometry control in adaptive truss structures involves two distinct parts: the efficient integration of the inverse kinematic differential equations that govern the geometry control and the fast computation of the Jacobian, which appears on the right-hand-side of the inverse kinematic equations. This paper present an efficient parallel implementation of the Jacobian computation on an MIMD machine. Large speedup from the parallel implementation is obtained, which reduces the Jacobian computation to an O(M-squared/n) procedure on an n-processor machine, where M is the number of members in the adaptive truss. The parallel algorithm given here is a good candidate for on-line geometry control of adaptive structures using attached processors.

Ramesh, A. V.↗

Accelerating a fluvial incision and landscape evolution model with parallelism

Solving inverse problems, performing sensitivity analyses, and achieving statistical rigour in landscape evolution models require running many model realizations. Parallel computation is necessary to achieve this in a reasonable time. However, no previous landscape evolution algorithm is able to leverage modern parallelism. In this report, I describe an algorithm that can utilize the parallel potential of GPUs and many-core processors, in addition to working well in serial. The new algorithm runs 43× faster (70 s vs. 3000 s on a 10,000×10,000 input) than the previous state-of-the-art and exhibits sublinear scaling with input size. I also identify key techniques for multiple flow direction routing and quickly eliminating landscape depressions and local minima. Complete, well-commented, easily adaptable source code for all versions of the algorithm is available on Github and Zenodo.

58 GEOSCIENCES↗

A New Approach to Parallel Dynamic Partitioning for Adaptive Unstructured Meshes

Classical mesh partitioning algorithms were designed for rather static situations, and their straightforward application in a dynamical framework may lead to unsatisfactory results, e.g., excessive data migration among processors. Furthermore, special attention should be paid to their amenability to parallelization. In this paper, a novel parallel method for the dynamic partitioning of adaptive unstructured meshes is described. It is based on a linear representation of the mesh using self-avoiding walks.

Heber, Gerd↗

An implementation of a tree code on a SIMD, parallel computer

We describe a fast tree algorithm for gravitational N-body simulation on SIMD parallel computers. The tree construction uses fast, parallel sorts. The sorted lists are recursively divided along their x, y and z coordinates. This data structure is a completely balanced tree (i.e., each particle is paired with exactly one other particle) and maintains good spatial locality. An implementation of this tree-building algorithm on a 16k processor Maspar MP-1 performs well and constitutes only a small fraction (approximately 15%) of the entire cycle of finding the accelerations. Each node in the tree is treated as a monopole. The tree search and the summation of accelerations also perform well. During the tree search, node data that is needed from another processor is simply fetched. Roughly 55% of the tree search time is spent in communications between processors. We apply the code to two problems of astrophysical interest. The first is a simulation of the close passage of two gravitationally, interacting, disk galaxies using 65,636 particles. We also simulate the formation of structure in an expanding, model universe using 1,048,576 particles. Our code attains speeds comparable to one head of a Cray Y-MP, so single instruction, multiple data (SIMD) type computers can be used for these simulations. The cost/performance ratio for SIMD machines like the Maspar MP-1 make them an extremely attractive alternative to either vector processors or large multiple instruction, multiple data (MIMD) type parallel computers. With further optimizations (e.g., more careful load balancing), speeds in excess of today's vector processing computers should be possible.

Olson, Kevin M.↗

Performance Characterization of a Hierarchical MPI Implementations on Large-scale Distributed-memory Platforms

The building blocks of emerging Petascale massively parallel processing (MPP) systems are multi-core processors with four or more cores as a single processing element and a customized network interface. The resulting memory and communication hierarchy of these platforms are now exposed to application developers and end users by creating a hierarchical or multi-core aware message-passing (MPI) programming interface and by providing a handful of runtime, tunable parameters that allows mapping and control of MPI tasks and message handling. We characterize performance of MPI communication patterns and present strategies for optimizing applications performance on Cray XT series systems that are composed of contemporary AMD processors and a proprietary network infrastructure. We highlight dependencies in its memory and network subsystems, which could influence production-level applications performance. We demonstrate that MPI micro-benchmarks could mislead an application developer or end user since these benchmarks often do not expose the interplay between memory allocation and usage in the user space, which depends on the number of tasks or cores and workload characteristics. Our studies show performance improvements compared to the default options for our target scientific benchmarks and production-level applications.

99 GENERAL AND MISCELLANEOUS↗

Structured building model reduction toward parallel simulation

Building energy model reduction exchanges accuracy for improved simulation speed by reducing the number of dynamical equations. Parallel computing aims to improve simulation times without loss of accuracy but is poorly utilized by contemporary simulators and is inherently limited by inter-processor communication. This paper bridges these disparate techniques to implement efficient parallel building thermal simulation. We begin with a survey of three structured reduction approaches that compares their performance to a leading unstructured method. We then use structured model reduction to find thermal clusters in the building energy model and allocate processing resources. Experimental results demonstrate faster simulation and low error without any interprocessor communication.

97 MATHEMATICS AND COMPUTING↗

An Evaluation of the ORNL Cray XT3

In 2005, Oak Ridge National Laboratory received delivery of a 5,294 processor Cray XT3. The XT3 is Cray's third-generation massively parallel processing system. The ORNL system uses a singleprocessor node built around the AMD Opteron and uses a custom chip-called SeaStar-for interprocessor communication. The system uses a lightweight operating system called Catamount on its compute nodes. This paper provides a performance evaluation of the Cray XT3, including measurements for microbenchmark, kernel, and application benchmarks. In particular, we provide performance results for strategic Department of Energy applications areas including climate, biology, astrophysics, combustion, and fusion. Our results, on up to 4,096 processors, demonstrate that the Cray XT3 provides competitive processor performance, high interconnect bandwidth, and high parallel efficiency on a diverse application workload, typical in the DOE Office of Science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗