Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 1 Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Electron acceleration at nearly perpendicular collisionless shocks. 3: Downstream distributions

Spacecraft observations at the Earth's bow shock and at interplanetary shocks have established that the largest fluxes of accelerated suprathermal electrons occur in so-called shock spike events immediately downstream of the shock ramp. Previous theoretical efforts have mainly focused on explaining upstream energetic electron beams. Here we investigate the general motion and acceleration of energetic electrons in a curved, nearly perpendicular shock by numerically integrating the orbits of solar wind halo electrons in shock fields generated by a hybrid simulation (core electron fluid and kinetic ions). Close to the angle Theta(sub Bn) = 90 degs between the upstream magnetic field and shock normal, the calculations result in a (perpendicular) temperature increase proportional to the magnetic field ratio and give the highest phase space densities in the overshoot. For a steep distribution, the temperature change can correspond to an enhancement of the distribution by several orders of magnitude. These results are in agreement with predictions from adiabatic mapping. With smaller angles Theta(sub Bn), the overshoot and downstream densities fall off quickly, because the adiabatic energy gain is less and fewer electrons transmit. The shock curvature also leads to an accumulation of electrons close to 90 degs. Without pitch angle scattering, energization is only significant within a few (approximately 5 to 10 degs) degrees of the point of tangency. However, shock spike events appear to be observed more easily and farther away from 90 degs. Given that over a region of several degrees around 90 degs the theory gives enhancements of up to approximately 4 orders of magnitude, such electrons could in principle account for the typically observed enhancements of 1 to 2 orders of magnitude, if they were distributed over Theta(sub Bn). To test the idea that scattering could efficiently redistribute the energetic electrons, we have conducted test particle simulations in which artificial pitch angle scattering is included. We find that such a process can indeed be very efficient and can explain observations of shock spike events far away from Theta(sub Bn) is approximately 90 degs. The scattering naturally leads to much higher phase space densities at smaller Theta(sub Bn) than what a local one-dimensional mapping would predict and thus can account for an observed discrepancy with adiabatic theory stated in the literature.

Krauss-Varban, D.↗

Treatment of CELSS and PCELSS waste to produce nutrients for plant growth

The research program entitled 'Development of a Prototype Experiment for Treating CELSS (Controlled Ecological Life Support Systems) and PCELSS (Partially Controlled Ecological Life Support Systems) Wastes to Produce Nutrients for Plant Growth' consists of two phases: (1) the development of the neccessary facilities, chemical methodologies and models for meaningful experimentation, and (2) the application of what methods and devices are developed to the interfacing of waste oxidation with plant growth. Homogeneous samples of freeze-dried human feces and urine have been prepared to ensure comparability of test results between CELSS waste treatment research groups. A model of PCELSS food processing wastes has been developed, and an automated gas chromatographic system to analyze oxidizer effluents was designed and brought to operational status. Attention is given the component configuration of the wet oxidation system used by the studies.

Modell, M.↗

Geometric accuracy assessment of Landsat-4 Thematic Mapper p-tapes

An analysis was performed on the P-format computer compatible tapes for the Landsat-4 Thematic Mapper (TM) scene 40109-15140 acquired November 2, 1982 over Washington, D.C. and environs. Three tests of sensor geometry were undertaken: (1) band-to-band registration, (2) line-to-line registration between swaths, and (3) geometric correction of sensor and spacecraft/ephemeris characteristics. The band-to-band and line-to-line registration was measured at one hundred pixel spacings along a line using the phase correlation image alignment method developed by Kuglin and Hines and adapted to a one-dimensional FFT correlation technique. The sensor and spacecraft geometric calibration analysis was checked by identifying 75 ground control points in the TM scene and on 1:24,000 topographic maps. A least squares fit of the gaps was computed and the vector offsets of the residuals was tabulated and plotted.

Bryant, N. A.↗

Comparison of medium frequency pulsed radar interferometer and correlation analysis winds, part 2

In order to test whether the chosen Doppler peaks represent localized scatters in motion, as opposed to some sort of integrated composite, an attempt was made to determine the change in position of single scatterers over a series of sequential records. A four-antenna system was employed which had 1 degree of freedom in phase. Due to limitations N-S linear transmission and E-W linear reception were used. The Doppler frequency peak selection criteria were that at least two of the four power spectra should have a local peak, and that normalized phase discrepancy, should be less than 0.3. The lack of success in tracking individual scatters seems to suggest a short lifetime. If this is the case, then the present experiment is not able to resolve the difference found between the correlation analysis true velocity and the interferometer value. On the other hand, it appears that the interferometer may be of some use in tracking waves.

Meek, C. E.↗

The oblique-wing research aircraft: A test bed for unsteady aerodynamic and aeroelastic research

The advantages of oblique wings have been the subject of numerous theoretical studies, wind tunnel tests, low speed flight models, and finally a low speed manned demonstrator, the AD-1. The specific objectives of the OWRA program are: (1) to establish the necessary technology base required to translate theoretical and experimental results into practical mission oriented designs; (2) to design, fabricate and flight test an oblique wing aircraft throughout a realistic flight envelope, and (3) to develop and validate design and analysis tools for asymmetric aircraft configurations. The preliminary design phase of the project is complete and has resulted in a wing configuration for which construction is ready to be initiated.

Gilyard, Glenn B.↗

The Use of the BSRN Data as A Benchmark for the POWER Hourly DHI and DNI and In Validating Derived Hourly GTI

The satellite-based CERES SYN1deg hourly data is the source data of the POWER GIS solar data that covers 2001 to near present. The SYN1deg(Ed4.1) hourly GHI agrees well with the BSRN data, but the hourly DHI and DirHI (Direct Horizontal Irradiance) are positively and negatively, respectively, biased with appreciable magnitudes. The hourly DNI, derived by dividing the DirHI by cos(SZA), or the cosine of the solar zenith angle, is therefore negatively biased. Based on the statistics of comparisons with the BSRN data, we performed bias corrections on the hourly DHI and DNI. The corrections were executed in the 3-D phase space of latitude, cos(SZA), and cloud fraction (CLFR). The isotropic model is then used to derive the hourly global tilted irradiance (GTI). For validation purpose, we applied the isotropic model to the BSRN data at the original 1-, 2-, 3- or 5-minute interval. The satellite-based hourly GTI shows good agreement with their BSRN counterpart. We also examined two monthly-mean-based methods that empirically derive monthly mean GTI and DNI from monthly mean GHI and from both monthly mean GHI and DHI. The monthly-mean-based results compare favorably with the hourly-mean-based results. The GEWEX SRB (V4-IP) provides POWER with daily mean GHI for the years before the CERES era, and the data were corrected using quantile mapping by referencing the CERES SYN1deg data. We used the Kolmogorov -Smirnov test (K-S test) and Cramer-von Mises test to examine how well the results agree with the BSRN data. We found that if we set the lower limit for the daily mean GHI to 30 W m-2, the data can pass the K-S test at 0.01 significance level and the Cramer-von Mises test at 0.001 significance level. If no lower limit is set on the daily means, the data fail both tests. The satellite-based CERES SYN1deg hourly data is the source data of the POWER GIS solar data that covers 2001 to near present. The SYN1deg(Ed4.1) hourly GHI agrees well with the BSRN data, but the hourly DHI and DirHI (Direct Horizontal Irradiance) are positively and negatively, respectively, biased with appreciable magnitudes. The hourly DNI, derived by dividing the DirHI by cos(SZA), or the cosine of the solar zenith angle, is therefore negatively biased. Based on the statistics of comparisons with the BSRN data, we performed bias corrections on the hourly DHI and DNI. The corrections were executed in the 3-D phase space of latitude, cos(SZA), and cloud fraction (CLFR). The isotropic model is then used to derive the hourly global tilted irradiance (GTI). For validation purpose, we applied the isotropic model to the BSRN data at the original 1-, 2-, 3- or 5-minute interval. The satellite-based hourly GTI shows good agreement with their BSRN counterpart. We also examined two monthly-mean-based methods that empirically derive monthly mean GTI and DNI from monthly mean GHI and from both monthly mean GHI and DHI. The monthly-mean-based results compare favorably with the hourly-mean-based results. The GEWEX SRB (V4-IP) provides POWER with daily mean GHI for the years before the CERES era, and the data were corrected using quantile mapping by referencing the CERES SYN1deg data. We used the Kolmogorov -Smirnov test (K-S test) and Cramer-von Mises test to examine how well the results agree with the BSRN data. We found that if we set the lower limit for the daily mean GHI to 30 W m-2, the data can pass the K-S test at 0.01 significance level and the Cramer-von Mises test at 0.001 significance level. If no lower limit is set on the daily means, the data fail both tests.

Taiping Zhang↗

Required attention for synthesized speech perception for three levels of linguistic redundancy

The study evaluates the attention required for synthesized speech perception with reference to three levels of linguistic redundancy. Twelve commercial airline pilots were individually tested for 16 cockpit warning messages eight of which consisted of two monosyllabic key words and eight of which consisted of two polysyllabic key words. Three levels of linguistic redundancy were identified: monosyllabic words, polysyllabic words, and sentences. The experiment contained a message familiarization phase and a message recognition phase. It was found that: (1) when the messages are part of a previously learned and recently heard set, and the subject is familiar with the phrasing, the attention needed to recognize the message is not a function of the level of linguistic redundancy, and (2) there is a quantitative and qualitative difference between recognition and comprehension processes; only in the case of active comprehension does additional redundancy reduce attention requirements.

Simpson, C. A.↗

Definition of two-phase flow behaviors for spacecraft design

Two-phase flow, thermal management systems are currently being considered as an alternative to conventional, single phase systems for future space missions because of their potential to reduce overall system mass, size, and pumping power requirements. Knowledge of flow regime transitions, heat transfer characteristics, and pressure drop correlations is necessary to design and develop two-phase systems. A boiling and condensing experiment was built in which R-12 was used as the working fluid. A two-phase pump was used to circulate a freon mixture and allow separate measurements of the vapor and liquid flow streams. The experimental package was flown five times aboard the NASA KC-135 aircraft which simulates zero-g conditions by its parabolic flight trajectory. Test conditions included stratified and annual flow regimes in 1-g which became bubbly, slug, or annular flow regimes on 0-g. A portion of this work is the analysis of adiabatic flow regimes. The superficial velocities of liquid and vapor have been obtained from the measured flow rates and are presented along with the observed flow regimes.

Reinarts, Thomas R.↗

Chemical vapor deposition of high T(sub c) superconducting films in a microgravity environment

Since the discovery of the YBaCuO bulk materials in 1987, Metalorganic Chemical Vapor Deposition (MOCVD) has been proposed for preparing HTSC high T(sub c) films. This technique is now capable of producing high-T(sub c) superconducting thin films comparable in quality to those prepared by any other methods. The MOCVD technique has demonstrated its superior advantage in making large area high quality HTSC thin films and will play a major role in the advance of device applications of HTSC thin films. The organometallic precursors used in the MOCVD preparation of HTSC oxide thin films are most frequently metal beta-diketonates. High T(sub c) superconductors are multi-component oxides which require more than one component source, with each source, containing one kind of precursor. Because the volatility and stability of the precursors are strongly dependent on temperature, system pressure, and carrier gas flow rate, it has been difficult to control the gas phase composition, and hence film stoichiometry. In order circumvent these problems we have built and tested a single source MOCVD reactor in which a specially designed vaporizer was employed. This vaporizer can be used to volatilize a stoichiometric mixture of diketonates of yttrium, barium and copper to produce a mixed vapor in a 1:2:3 ratio respectively of the organometellics. This is accomplished even though the three compounds have significantly different volatilities. We have developed a model which provides insight into the process of vaporizing mixed precursors to produce high quality thin films of Y1Ba2Cu3O7. It shows that under steady state conditions the mixed organometallic vapor must have a stoichiometric ratio of the individual organometallics identical to that in the solid mixture.

Levy, Moises↗

Intermittent turbulence in solar wind from the south polar hole

The magnetic fields measured by the Ulysses spacecraft are used to study solar wind turbulence in the fast solar wind from the south polar hole. The spacecraft was at about 46 deg south latitude and 3.9 AU. For a magnetic field with a Gaussian distribution the power spectrum (second-order structure function) is sufficient to completely characterize the turbulence. However, the actual distribution is non-Gaussian so that the effects of intermittency must be taken into account. The observed spectral exponents include effects of intermittency and cannot be directly compared with the standard second-order spectral theories such as the Kolmogorov and Kraichnan theories. To permit a better comparison of the observations with the theoretical models, we study the structure characteristics of the data. We find the exponents of the second-order structure functions (power spectra) and the higher-order normalized structure functions for the components of the magnetic fields. We show that these sets of exponents can be approximately described by two basic numbers: the spectral exponent and the intermittency exponent. The intermittency exponent characterizes correlation properties of the energy cascade from large to small scales. Before comparing the observations to the theoretically expected values, a reduction must be made to the observed spectral exponent. The amount of the reduction depends on both the intermittency exponent and the model of the energy cascade assumed in the turbulence theory. We reduce the measured spectral indices according to a simple model for Alfven turbulence that is described here. We then compare our reduced spectral indices with second-order spectral theory. The reduced spectral indices for the period range of 1 min to about a half hour are remarkably constant and in good agreement with the value of 3/2. Thus our treatment is self-consistent. Our tentative conclusion is that the high-frequency turbulence appears to agree with the model of random-phased Alfven waves. This tentative conclusion must be tested by further theoretical and observational work.

Ruzmaikin, A. A.↗

Overview and Accomplishments of Advanced Mirror Technology Development Phase 2 (AMTD-2) Project

The Advance Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort, initiated in FY12, to mature by at least a half TRL step critical technologies required to enable 4 meter or larger UVOIR space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD Phase 1 completed all of its goals and accomplished all of its milestones. AMTD Phase 2 started in 2014. Key accomplishments include deriving primary mirror engineering specifications from science requirements; developing integrated modeling tools and using those tools to perform parametric design trades; and demonstrating new mirror technologies via sub-scale fabrication and test. AMTD-1 demonstrated the stacked core technique by making a 43-cm diameter 400 mm thick 'biscuit-cut' of a 4-m class mirror. AMTD-2 is demonstrating lateral scalability of the stacked core method by making a 1.5 meter 1/3rd scale model of a 4-m class mirror.

Space Telescope Mirrors↗

Hybrid Thermally Efficient Core (HyTEC) HyTEC Phase 1 – Advanced Aerodynamics Final Report

The objective of the Hybrid Thermally Efficient Core (HyTEC) – Advanced High Pressure Turbine (HPT) Aerodynamics project is to develop technology for a compact core that contributes to significant fuel burn reductions of 5-10% over current generation technologies. To accomplish this, the HPT is incorporating a range of aerodynamic features and technologies to improve component efficiency and provide favorable systems level trades. In particular, this project explored low solidity airfoils, advanced tip treatments, platform contouring, and advanced ceramic matrix composite (CMC) Stage 2 Nozzle (S2N) airfoils to eliminate the need for post throat cooling in a compact core environment. The maturation of these technology areas is expected to provide a significant improvement in component efficiencies, and consequently reductions in fuel burn, over the current state of the art (SoA). To mature these technologies to Technology Readiness Level (TRL) 4, a test campaign was performed that consisted of four tests at three facilities. TRL 3 testing was performed in the CW22 linear cascade at NASA Glenn for blade and nozzle technologies, TRL 4 nozzle testing was performed at GE Aerospace (GEA) Test Cell A8, and TRL 4 blade testing was performed at the Notre Dame Turbomachinery Laboratory (NDTL) using the Transonic Research Turbine (TRT) rig. Low solidity was successfully demonstrated to a TRL 4 level. Low solidity nozzles showed benefits in line with pre-project expectations, while low solidity blades were shown to have an aerodynamic penalty. Crucially, this program only considered the aerodynamic losses, and systems trades such as reductions in cooling flows are expected to continue to make low solidity blades a net positive. By successfully quantifying the aerodynamic performance in this project, these trades can be conducted to determine where in the engine architecture low solidity blades will contribute positively to system operation. Platform contouring was demonstrated to a TRL 4 level, with performance in line with the lower end of the pre-project expected range. Advanced tip treatments performance levels were indeterminate, showing the expected improvements to flow physics but with a performance level confounded by several rig issues including whirl mode induced variation in tip clearance. The elimination of post-throat cooling on the S2N was successfully demonstrated to provide a performance benefit, however that benefit was approximately half the level that was expected in pre-project predictions. Overall, the technology maturation plan for HyTEC Phase 1 was successful, bringing the suite of technologies to TRL 4.

High pressure turbine↗

Definition phase for thermal ion dynamics experiment for OPEN

The Thermal Ion Dynamics Experiment (TIDE) combines differential measurements of angle, energy, and mass to determine the detailed distribution function of low energy magnetospheric ions in the range of 0 to 100 eV. Goals included designing a 1 sq cm entrance aperture, minimizing trajectory divergence at exist aperture, and minimizing internal scattering. Design parameters were used to construct the test model.

Sharp, W. E.↗

The Cryogenic Test Bed experiments: Cryogenic heat pipe flight experiment CRYOHP (STS-53). Cryogenic two phase flight experiment CRYOTP (STS-62). Cryogenic flexible diode flight experiment CRYOFD

This paper presents an overview of the Cryogenic Test Bed (CTB) experiments including experiment results, integration techniques used, and lessons learned during integration, test and flight phases of the Cryogenic Heat Pipe Flight Experiment (STS-53) and the Cryogenic Two Phase Flight Experiment (OAST-2, STS-62). We will also discuss the Cryogenic Flexible Diode Heat Pipe (CRYOFD) experiment which will fly in the 1996/97 time frame and the fourth flight of the CTB which will fly in the 1997/98 time frame. The two missions tested two oxygen axially grooved heat pipes, a nitrogen fibrous wick heat pipe and a 2-methylpentane phase change material thermal storage unit. Techniques were found for solving problems with vibration from the cryo-collers transmitted through the compressors and the cold heads, and mounting the heat pipe without introducing parasitic heat leaks. A thermally conductive interface material was selected that would meet the requirements and perform over the temperature range of 55 to 300 K. Problems are discussed with the bi-metallic thermostats used for heater circuit protection and the S-Glass suspension straps originally used to secure the BETSU PCM in the CRYOTP mission. Flight results will be compared to 1-g test results and differences will be discussed.

Thienel, Lee↗

Heliogyro Preliminary Design, Phase 2

There are 12 blades in the Heliogyro design, and each blade is envisioned to be 8 meters in width and 7,500 meters in length. The blades are expected to be composed primarily of a thin membrane constructed of material such as Kapton film with an aluminum reflective coating on one side and an infrared emissive coating on the other. The present Phase 2 Final Report covers work done on the following six topics: (1) Design and analysis of a stowable circular lattice batten for the Heliogyro blade. (2) Design and analysis of a biaxially tensioned blade panel. (3) Definition of a research program for micrometeoroid damage to tendons. (4) A conceptual design for a flight test model of the Heliogyro. (5) Definition of modifications to the NASTRAN computer program required to provide improved analysis of the Heliogyro. (6) A User's Manual covering applications of NASTRAN to the Heliogyro.

Source record↗

Definition of technology development missions for early Space Station satellite servicing. Volume 1: Executive summary

The Executive Summary volume 1, includes an overview of both phases of the Definition of Technology Development Missions for Early Space Station Satellite Servicing. The primary purpose of Phase 1 of the Marshall Space Flight Center (MSFC) Satellite Servicing Phase 1 study was to establish requirements for demonstrating the capability of performing satellite servicing activities on a permanently manned Space Station in the early 1990s. The scope of Phase 1 included TDM definition, outlining of servicing objectives, derivation of initial Space Station servicing support requirements, and generation of the associated programmatic schedules and cost. The purpose of phase 2 of the satellite servicing study was to expand and refine the overall understanding of how best to use the manned space station as a test bed for demonstration of satellite servicing capabilities.

Source record↗

Physical properties of concrete made with Apollo 16 lunar soil sample

This paper describes the first phase of the long-term investigation for the construction of concrete lunar bases. In this phase, petrographic and scanning electron microscope examinations showed that the morphology and elemental composition of the lunar soil made it suitable for use as a fine aggregate for concrete. Based on this finding, calcium aluminate cement and distilled water were mixed with the lunar soil to fabricate test specimens. The test specimens consisted of a 1-in cube, a 1/2-in cube, and three 0.12 x 0.58 x 3.15-in beam specimens. Tests were performed on these specimens to determine compressive strength, modulus of rupture, modulus of elasticity, and thermal coefficient of expansion. Based on examination of the material and test results, it is concluded that lunar soil can be used as a fine aggregate for concrete.

Lin, T. D.↗

Temporal averaging of phase measurements in the presence of spurious phase drift - Application to phase-stepped real-time holographic interferometry

A technique that compensates for low spatial frequency spurious phase changes during an interference experiment is developed; it permits temporal averaging of multiple-phase measurements, made before and after object displacement. The method is tested with phase-stepped real-time holographic interferometry applied to cantilever bending of a piezoelectric bimorph ceramic. Results indicate that temporal averaging of the corrected data significantly reduces the white noise in a phase measurement without incurring systematic errors or sacrificing spatial resolution. White noise is reduced from 3 deg to less than 1 deg using these methods.

Ovryn, B.↗