Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phased array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Pressure-Induced Disordered Substitution Alloy in Sb[subscript 2]Te[subscript 3]

A new type of disordered substitution alloy of Sb and Te at above 15.1 GPa was discovered by performing in situ high-pressure angle-dispersive X-ray diffraction experiments on antimony telluride (Sb{sub 2}Te{sub 3}), a topological insulator and thermoelectric material, at room temperature. In this disordered substitution alloy, Sb{sub 2}Te{sub 3} crystallizes into a monoclinic structure with the space group C2/m, which is different from the corresponding high-pressure phase of the similar isostructural compound Bi{sub 2}Te{sub 3}. Above 19.8 GPa, Sb{sub 2}Te{sub 3} adopts a body-centered-cubic structure with the disordered atomic array in the crystal lattice. The in situ high-pressure experiments down to about 13 K show that Sb{sub 2}Te{sub 3} undergoes the same phase-transition sequence with increasing pressure at low temperature, with almost the same phase-transition pressures.

36 MATERIALS SCIENCE↗

Bimodality in Arrays of In{sub 0.4}Ga{sub 0.6}As Hybrid Quantum-Confined Heterostructures Grown on GaAs Substrates

Hybrid quantum-confined heterostructures grown by metal-organic vapor-phase epitaxy (MOVPE) via the deposition of In{sub 0.4}Ga{sub 0.6}As layers with various nominal thicknesses onto vicinal GaAs substrates are studied by photoluminescence spectroscopy and transmission electron microscopy. The photoluminescence spectra of these structures show the superposition of two spectral lines, which is indicative of the bimodal distribution of the size and/or shape of light-emitting objects in an array. The dominant spectral line is attributed to the luminescence of hybrid “quantum well–dot” nanostructures in the form of a dense array of relatively small quantum dots (QDs) with weak electron and hole localization. The second, lower intensity line is attributed to luminescence from a less dense array of comparatively larger QDs. Analysis of the behavior of the spectral line intensities at various temperatures showed that the density of larger QDs grows with increasing thickness of the InGaAs layer.

36 MATERIALS SCIENCE↗

Frequency-domain modeling of floating wind arrays with shared mooring lines

A frequency-domain model for floating wind turbine dynamics has been extended to model floating wind farms with couplings from shared mooring systems. The model, called RAFT, could previously calculate the mean offsets and wave-induced response spectra for single floating wind turbines. Now, the model supports multiple floating wind turbines, each with their own properties and responses, along with mooring lines that run directly between floating wind turbines in the array, meaning that shared mooring lines or fully suspended dynamic power cables can be included. This capability is achieved by setting up an array-level solution of the system mean offsets and assembling the full system matrices for solving the dynamic response. The quasi-static mooring model MoorPy is used to linearize the mooring system properties. To compute the floating wind turbine relative motions, phase offsets are applied to each turbine's response as a function of wave frequency based on the wavelength and relative positions in the array. These differential motions are then applied to mooring system tension Jacobians to compute the tension loads in the shared mooring lines. Overall, the capability provides a frequency-domain analog to the modeling capabilities of the floating support structure in FAST.Farm. Mean offsets and power spectral density plots of responses are compared between RAFT and FAST.Farm to verify the implementation. The results indicate good agreement within the expectations of a frequency-domain modeling approach and suggest correct implementation of the shared mooring aspects. Additionally, a unique comb-like frequency response in the shared mooring line tensions has been observed. This phenomenon has a clear physical basis and may be an important design consideration for future shared mooring systems.

17 WIND ENERGY↗

EVIDENCE OF SIGNIFICANT ENERGY INPUT IN THE LATE PHASE OF A SOLAR FLARE FROM NuSTAR X-RAY OBSERVATIONS

We present observations of the occulted active region AR 12222 during the third Nuclear Spectroscopic Telescope ARray ( NuSTAR ) solar campaign on 2014 December 11, with concurrent Solar Dynamics Observatory ( SDO )/AIA and FOXSI-2 sounding rocket observations. The active region produced a medium-size solar flare 1 day before the observations, at ∼18 UT on 2014 December 10, with the post-flare loops still visible at the time of NuSTAR observations. The time evolution of the source emission in the SDO/ AIA 335 Å channel reveals the characteristics of an extreme-ultraviolet late-phase event, caused by the continuous formation of new post-flare loops that arch higher and higher in the solar corona. The spectral fitting of NuSTAR observations yields an isothermal source, with temperature 3.8–4.6 MK, emission measure (0.3–1.8) × 10{sup 46} cm{sup −3}, and density estimated at (2.5–6.0) × 10{sup 8} cm{sup −3}. The observed AIA fluxes are consistent with the derived NuSTAR temperature range, favoring temperature values in the range of 4.0–4.3 MK. By examining the post-flare loops’ cooling times and energy content, we estimate that at least 12 sets of post-flare loops were formed and subsequently cooled between the onset of the flare and NuSTAR observations, with their total thermal energy content an order of magnitude larger than the energy content at flare peak time. This indicates that the standard approach of using only the flare peak time to derive the total thermal energy content of a flare can lead to a large underestimation of its value.

79 ASTRONOMY AND ASTROPHYSICS↗

Gel-like properties of MCM-41 material and its transformation to MCM-50 in a caustic alkaline surround

Highlights: Black-Right-Pointing-Pointer MCM-41 material transforms gradually into MCM-50 lamellar gel upon controlled exposure to 6 M KOH. Black-Right-Pointing-Pointer The formation of MCM-50 ordered gel structure occurs at KOH weight content of 40-70 wt. %. Black-Right-Pointing-Pointer MCM gel phase shows pseudoplastic behavior and possesses homogeneous matrix texture. -- Abstract: MCM-41 material, prepared by sol-gel method, reveals gel-like properties in a caustic alkaline environment, i.e., 6 M potassium hydroxide (KOH) electrolyte. The gellation of MCM-41 starts at a KOH weight ratio of 40 wt.%. The structural change of the material is verified with X-Ray diffractograms and supported by observation using Scanning Electron Microscope (SEM). As the KOH weight ratio increases, the MCM-41 hexagonal arrays structure gradually transforms into MCM-50 lamellar structure before disappearing completely at 80 wt.% KOH. The MCM gel phase is further characterized by rotational viscometry and texture analysis. The gel phase shows shear thinning or pseudoplastic behavior and possesses homogeneous matrix structure.

36 MATERIALS SCIENCE↗

Fabrication of a 238Pu target

Precision neutron-induced reaction data are important for modeling the network of isotope production and destruction within a given diagnostic chain. This network modeling has many applications such as the design of advanced fuel cycle for reactors and the interpretation of radiochemical data related to the stockpile stewardship and nuclear forensics projects. Our current funded effort is to improve the neutron-induced reaction data on the short-lived actinides and the specific goal is to improve the neutron capture data on {sup 238}Pu with a half-life of 87.7 years. In this report, the fabrication of a {sup 238}Pu target for the proposed measurement using the DANCE array at LANL is described. The {sup 238}Pu target was fabricated from a sample enriched to 99.35%, acquired from ORNL. A total of 395 {micro}g was electroplated onto both sides of a 3 {micro}m thick Ti foil using a custom-made plating cell, shown in Fig 1. The target-material loaded Ti foil is sandwiched between two double-side aluminized mylar foils with a thickness of 1.4 {micro}m. The mylar foil is glued to a polyimide ring. This arrangement is shown partially in Fig. 2. The assembled target is then inserted into an aluminum container with a wall thickness of 0.76 mm, shown in Fig. 3. A derlin ring is used to keep the target assembly in place. The ends of this cylindrical container are vacuum-sealed by two covers with thin Kapton foils as windows for the beam entrance and exit. Shown in Fig. 4 is details of the arrangement. This target is used for phase I of the proposed measurement on {sup 238}Pu scheduled for Nov 2010 together with the DANCE array to address the safety issues raised by LANL. Shown in Fig. 5 is the preliminary results on the yield spectrum as a function of neutron incident energy with a gate on the total {gamma}-ray energy of equivalent Q value. Since no fission PPAC is employed, the distinction between the capture and fission events cannot be made, which is important for the higher neutron incident energy. However, it indicates that a cross section of less than one barn can be measured. The second phase of this experiment will be carried out in 2011 by assembling a PPAC with the {sup 238}Pu target to extend the measurement to higher neutron incident energies by distinguishing the capture from fission events. The fission cross section becomes dominant for neutron incident energies above 30 keV. This PPAC was developed in FY2010 under the NA22 funding and performed very well for the {sup 239}Pu and {sup 241}Pu measurements. A new {sup 238}Pu target will be fabricated for the phase II measurement using the same electroplating technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanoscale Structural and Chemical Properties of Antipolar Clusters in Sm-Doped BiFeO3 Ferroelectric Epitaxial Thin Films

The local atomic structure and nanoscale chemistry of an antipolar phase in Bi{sub 0.9}Sm{sub 0.1}FeO{sub 3} epitaxial thin films are examined by an array of transmission electron microscopy (TEM) coupled with electron diffraction and electron energy-loss spectroscopy methods. The observations are tied to macroscopic properties of the films, namely, polarization-electric field hysteresis loops, dielectric constant-electric field hysteresis loops, and the dielectric loss. At room temperature, the local Sm deficiency was determined to destabilize the long-range ferroelectric state, resulting in the formation of local antipolar clusters with the appearance of PbZrO{sub 3}-like antiparallel cation displacements, which give rise to 1/4{l_brace}011{r_brace} and 1/4{l_brace}211{r_brace} reflections as well as 1/2{l_brace}321{r_brace}, because of in-phase oxygen octahedral tilts. Aberration-corrected TEM analysis reveals that the antipolar structure is actually a lamellar of highly dense ferroelectric domains with alternating polarizations. With increasing temperature, a phase transition was observed at 150 C, which is attributed to the reduction of the antiparallel displacements, giving way to cell-doubling structural transition.

36 MATERIALS SCIENCE↗

Phonon scattering mechanisms dictating the thermal conductivity of lead zirconate titanate (PbZr 1- x Ti x O 3 ) thin films across the compositional phase diagram

This paper represents a thorough investigation of the thermal conductivity (κ) in both thin film and bulk PbZr 1–x Ti x O 3 (PZT) across the compositional phase diagram. Given the technological importance of PZT as a superb piezoelectric and ferroelectric material in devices and systems impacting a wide array of industries, this research serves to fill the gap in knowledge regarding the thermal properties. The thermal conductivities of both thin film and bulk PZT are found to vary by a considerable margin as a function of composition x. Additionally, we observe a discontinuity in κ in the vicinity of the morphotropic phase boundary (MPB, x = 0.48) where there is a 20%–25% decrease in κ in our thin film data, similar to that found in literature data for bulk PZT. The comparison between bulk and thin film materials highlights the sensitivity of κ to size effects such as film thickness and grain size even in disordered alloy/solid-solution materials. A model for the thermal conductivity of PZT as a function of composition (κ(x)) is presented, which enables the application of the virtual crystal approximation for alloy-type material systems with very different crystals structures, resulting in differing temperature trends for κ. We show that in the case of crystalline solid-solutions where the thermal conductivity of one of the parent materials exhibits glass-like temperature trends the compositional dependence of thermal conductivity is relatively constant for most values of x. Finally, this is in stark contrast with the typical trends of thermal conductivity with x in alloys, where the thermal conductivity increases dramatically as the composition of the alloy or solid-solution approaches that of a pure parent materials (i.e., as x = 0 or 1).

36 MATERIALS SCIENCE↗

An Analysis of Published DAS Studies for Application to SPE Phase III

Distributed Acoustic Sensing (DAS) is an emerging technology capable of recording the acoustic wavefield at unprecedented spatial resolution. However, this new tool requires significant refinements before it becomes operational for explosion monitoring objectives. Recent studies have shown significant development of array processing with DAS data. In this report we explore three such array processing methods including DAS strain-rate data versus geophone measured ground motion, beamforming for event parameters, and machine learning based denoising. Prior to applying these algorithms to the Source Physics Experiment Phase II and Phase III data, we validate these methods through replication analysis.

47 OTHER INSTRUMENTATION↗

Phase Diagrams in Graphene-like Ising Nanoparticles

The phase diagrams of four graphene-like nanoparticles described by the Ising model are investigated by the use of the effective-field theory with correlations. The particle is represented by a two-dimensional array of spin-1/2 atoms with two types of exchange interactions, J and J{sub S}. The effects of surface exchange interaction J{sub S} on the phase diagrams are examined. We have found some characteristic behaviours.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characteristics of implosion and radiation for aluminum planar wire array z-pinch at 1.5 MA

Planar wire arrays Z pinches were carried out on Qiangguang generator (1.5 MA, 100 ns). Loads with varied row widths (6-24 mm) and wire numbers (10-34) were employed in the experiments. The implosion dynamics of planar wire arrays has been studied. Meanwhile, the changes of the implosion time, radiation yield and power with array mass, inter-wire gap, and array width were investigated. The images of a soft X-ray camera exhibit that the trailing mass, precursor column, and R-T instability exist during the implosion phase, and when m = 0 maybe accompanied with m = 1, instability will rapidly develop after stagnation. The implosion trajectories show that loads will implode by the snowplow mode and about 50% of total initial array mass will participate in the final implosion. The maximum total X-ray energy is 22 kJ with a power of 630 GW, while the maximum K-shell yield is 3.9 kJ with a power of 158 GW. Experiments with different planar wire arrays show that the value of m{sub P}D{sub 0}{sup 2} (the product of line mass and squared width) is the critical factor which affects the implosion time and the X-ray products of the wire arrays. The optimum value of m{sub P}D{sub 0}{sup 2} should be in the range of 200-400 {mu}gcm and the inter-wire gap should be less than 1 mm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Clogging and jamming transitions in periodic obstacle arrays

We numerically examine clogging transitions for bidisperse disks flowing through a two-dimensional periodic obstacle array. Here, we show that clogging is a probabilistic event that occurs through a transition from a homogeneous flowing state to a heterogeneous or phase-separated jammed state where the disks form dense connected clusters. The probability for clogging to occur during a fixed time increases with increasing particle packing and obstacle number. For driving at different angles with respect to the symmetry direction of the obstacle array, we show that certain directions have a higher clogging susceptibility. It is also possible to have a size-specific clogging transition in which one disk size becomes completely immobile while the other disk size continues to flow.

36 MATERIALS SCIENCE↗

Phase-resolved NuSTAR and Swift-XRT observations of magnetar 4U 0142+61

We present temporal and spectral analysis of simultaneous 0.5–79 keV Swift-XRT and Nuclear Spectroscopic Telescope Array observations of the magnetar 4U 0142+61. The pulse profile changes significantly with photon energy between 3 and 35 keV. The pulse fraction increases with energy, reaching a value of ≈20%, similar to that observed in 1E 1841–045 and much lower than the ≈80% pulse fraction observed in 1E 2259+586. We do not detect the 55 ks phase modulation reported in previous Suzaku-HXD observations. The phase-averaged spectrum of 4U 0142+61 above 20 keV is dominated by a hard power law (PL) with a photon index Γ{sub H}∼0.65, and the spectrum below 20 keV can be described by two blackbodies, a blackbody plus a soft PL, or by a Comptonized blackbody model. We study the full phase-resolved spectra using the e{sup ±} outflow model of Beloborodov. Our results are consistent with the parameters of the active j-bundle derived from INTEGRAL data by Hascoët et al. We find that a significant degeneracy appears in the inferred parameters if the footprint of the j-bundle is allowed to be a thin ring instead of a polar cap. The degeneracy is reduced when the footprint is required to be the hot spot inferred from the soft X-ray data.

79 ASTRONOMY AND ASTROPHYSICS↗

Formation of surface ionization waves in a plasma enhanced packed bed reactor for catalysis applications

Plasma enhanced packed bed reactors (PE-PBRs) intrinsically have complex geometries which makes it difficult to apply conventional scaling laws. For example, controlling the manner of discharge propagation between the micro-discharges (MDs) that occur between dielectrics in PE-PBRs and surface ionization waves (SIWs) that propagate along the dielectrics would aid in selectivity during plasma catalysis. An important parameter in that optimization is the pulse power format. In this work, we investigated the role of applied voltage amplitude and polarity on time resolved dynamics in an atmospheric pressure dielectric barrier discharge (DBD) operating in helium having surface topology resembling PE-PBRs using phase and space resolved optical emission spectroscopy (PROES). To enable systematic studies, the DBD uses an array of dielectric semi-spheres imaged through a top transparent electrode and imaged between the two electrodes from the side. The results were compared with 2-dimensional modeling. We identified three discharge mechanisms: filamentary micro-discharges (F-MDs) in the volume (the space between the surface of the dielectrics and the counter electrode), surface micro-discharges (S-MDs) between the dielectric semi-spheres near their contact points, and SIWs over the curved or flat dielectric surfaces. At the lowest voltages, only F-MDs are generated, once in each half cycle. At intermediate voltages, SIWs also appear which transform into S-MDs at the contact points. When voltage is further increased, several additional pulses are observed, which generate S-MDs at the contact points or a combination F-MDs and S-MDs. The voltage amplitude determines the frequency of these pulses. Modeling results show variations in plasma density and electron temperature for each of the three mechanisms which, in turn, impact production of reactive species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of Vortex Nucleation in a Rotating Two-Dimensional Lattice of Bose-Einstein Condensates

We report the observation of vortex nucleation in a rotating optical lattice. A {sup 87}Rb Bose-Einstein condensate was loaded into a static two-dimensional lattice and the rotation frequency of the lattice was then increased from zero. We studied how vortex nucleation depended on optical lattice depth and rotation frequency. For deep lattices above the chemical potential of the condensate we observed a linear dependence of the number of vortices created with the rotation frequency, even below the thermodynamic critical frequency required for vortex nucleation. At these lattice depths the system formed an array of Josephson-coupled condensates. The effective magnetic field produced by rotation introduced characteristic relative phases between neighboring condensates, such that vortices were observed upon ramping down the lattice depth and recombining the condensates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Custom Accessors: Enabling Scalable Data Ingestion, (Re-)Organization, and Analysis on Distributed Systems

The emerging class of high velocity and high volume data analytic workflows comprise interwoven data ingestion, organization, and processing stages, with ingestion and organization steps often contributing comparable or even higher computational costs than actual processing steps. Since complex workflows consist of a variety of phases that view and use data differently, being able to construct efficient, scalable, distributed data structures (arrays, vectors, sets, maps, and multi-maps) is essential and requires custom methods to extend and shrink containers, analyze and position data, and, maintain globallyconsistent meta-data. In this paper, we propose a novel datastructure access paradigm based on the concept of Accessors. At a high level, accessors are customizable callable objects that can modify the behavior of insert, read, update, and delete operations for distributed containers while preserving atomicity guarantees. Accessors provide a very clean and natural way to implement a variety of programming patterns, e.g., conditional insertion/deletion and cascading computations, which would be otherwise hard (or even impossible) to express in parallel and distributed settings without using locks. We demonstrate the practicality and usefulness of our approach with two representative use cases and study the performance of these applications on a distributed High-Performance Computing system. Our analysis highlights that our proposed abstraction allows for an effective overlapping and concurrent execution of different workflow steps (e.g., data ingestion and analysis), which in a conventional analytics pipeline would execute sequentially, contributing cumulatively to the overall latency.

Castellana, Vito G. [BATTELLE (PACIFIC NW LAB)] (O↗

FIDVR Capability of Hybrid Grid-Forming PV Power Plants During Feeder Restoration

Grid-forming inverters must optimally transfer power from dc-coupled photovoltaic arrays and batteries into an ac grid. Further, they must be able to restore single-phase induction motors (SPIMs) and withstand fault-induced delayed voltage-recovery (FIDVR) events. These resilience and reliability challenges are addressed here by: (i) engineering a controller to optimally operate dc-coupled hybrid resources; (ii) modeling residential air-conditioning compressors for restoration/FIDVR studies; and (iii) analyzing SPIM thermal-relay performance under limited inverter currents and designing an electronic protection for stalled SPIMs. Furthermore, these contributions are demonstrated via electromagnetic-transient simulations and can be helpful to understand recommendations by the North American Electric Reliability Corporation.

14 SOLAR ENERGY↗

Monitoring internal organ motion with continuous wave radar in CT

Purpose: To avoid motion artifacts in medical imaging or to minimize the exposure of healthy tissues in radiation therapy, medical devices are often synchronized with the patient's respiratory motion. Today's respiratory motion monitors require additional effort to prepare the patients, e.g., mounting a motion belt or placing an optical reflector on the patient's breast. Furthermore, they are not able to measure internal organ motion without implanting markers. An interesting alternative to assess the patient's organ motion is continuous wave radar. The aim of this work is to design, implement, and evaluate such a radar system focusing on application in CT.Methods: The authors designed a radar system operating in the 860 MHz band to monitor the patient motion. In the intended application of the radar system, the antennas are located close to the patient's body inside the table of a CT system. One receive and four transmitting antennas are used to avoid the requirement of exact patient positioning. The radar waves propagate into the patient's body and are reflected at tissue boundaries, for example at the borderline between muscle and adipose tissue, or at the boundaries of organs. At present, the authors focus on the detection of respiratory motion. The radar system consists of the hardware mentioned above as well as of dedicated signal processing software to extract the desired information from the radar signal. The system was evaluated using simulations and measurements. To simulate the radar system, a simulation model based on radar and wave field equations was designed and 4D respiratory-gated CT data sets were used as input. The simulated radar signals and the measured data were processed in the same way. The radar system hardware and the signal processing algorithms were tested with data from ten volunteers. As a reference, the respiratory motion signal was recorded using a breast belt simultaneously with the radar measurements.Results: Concerning the measurements of the test persons, there is a very good correlation (ρ= 0.917) between the respiratory motion phases received by the radar system and the external motion monitor. Our concept of using an array of transmitting antennas turned out to be widely insensitive to the positioning of the test persons. A time shift between the respiratory motion curves recorded with the radar system and the motion curves from the external respiratory monitor was observed which indicates a slight difference between internal organ motion and motion detected by the external respiratory monitor. The simulations were in good accordance with the measurements.Conclusions: A continuous wave radar operating in the near field of the antennas can be used to determine the respiratory motion of humans accurately. In contrast to trigger systems used today, the radar system is able to measure motion inside the body. If such a monitor was routinely available in clinical CT, it would be possible optimizing the scan start with respect to the respiratory state of the patient. Breathing commands would potentially widely be avoided, and as far as uncooperative patients or children are concerned, less sedation might be necessary. Further applications of the radar system could be in radiation therapy or interventional imaging for instance.

62 RADIOLOGY AND NUCLEAR MEDICINE↗