Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantitative analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Distinguishing the importance of fullerene phase separation from polymer ordering in the performance of low band gap polymer: Bis-fullerene heterojunctions

It is known, one way to improve power conversion efficiency (PCE) of polymer based bulk-heterojunction (BHJ) photovoltaic cells is to increase the open circuit voltage (V oc ). Replacing PCBM with bis-adduct fullerenes significantly improves V oc and the PCE in devices based on the conjugated polymer poly(3-hexyl thiophene) (P3HT). However, for the most promising low band-gap polymer (LBP) system, replacing PCBM with ICBA results in poor short-circuit current (J sc ) and PCE although V oc is significantly improved. The optimization of the morphology of as-cast LBP/bis-fullerene BHJ photovoltaics is attempted by adding a co-solvent to the polymer/fullerene solution prior to film deposition. Varying the solubility of polymer and fullerene in the co-solvent, bulk heterojunctions are fabricated with no change of polymer ordering, but with changes in fullerene phase separation. The morphologies of the as-cast samples are characterized by small angle neutron scattering and neutron reflectometry. A homogenous dispersion of ICBA in LBP is found in the samples where the co-solvent is selective to the polymer, giving poor device performance. Aggregates of ICBA are formed in samples where the co-solvent is selective to ICBA. Furthermore, the resultant morphology improves PCE by up to 246%. Finally, a quantitative analysis of the neutron data shows that the interfacial area between ICBA aggregates and its surrounding matrix is improved, facilitating charge transport and improving the PCE.

30 DIRECT ENERGY CONVERSION↗

Removal of the Magnetic Dead Layer by Geometric Design

The proximity effect is used to engineer interface effects such as magnetoelectric coupling, exchange bias, and emergent interfacial magnetism. However, the presence of a magnetic “dead layer” adversely affects the functionality of a heterostructure. Here in this paper, it is shown that by utilizing (111) polar planes, the magnetization of a manganite ultrathin layer can be maintained throughout its thickness. Combining structural characterization, magnetometry measurements, and magnetization depth profiling with polarized neutron reflectometry, it is found that the magnetic dead layer is absent in the (111)-oriented manganite layers, however, it occurs in the films with other orientations. Quantitative analysis of local structural and elemental spatial evolutions using scanning transmission electron microscopy and electron energy loss spectroscopy reveals that atomically sharp interfaces with minimal chemical intermixing in the (111)-oriented superlattices. The polar discontinuity across the (111) interfaces inducing charge redistribution within the SrTiO 3 layers is suggested, which promotes ferromagnetism throughout the (111)-oriented ultrathin manganite layers. The approach of eliminating problematic magnetic dead layers by changing the crystallographic orientation suggests a conceptually useful recipe to engineer the intriguing physical properties of oxide interfaces, especially in low dimensionality.

36 MATERIALS SCIENCE↗

Self‐Assembled LuFeO 3 /LuFe 2 O 4 Heterostructure with Emergent Ferroic Orderings

Abstract Achieving self‐assembling structures that exhibit emergent properties and functionalities is one of the holy grails in nanotechnology and holds great promise for a wide range of potential applications. Herein, a self‐assembled LuFeO 3 –(1/3)LuFe 2 O 4 –LuFeO 3 heterostructure that consists of two model multiferroics, i.e., hexagonal LuFeO 3 and rhombohedral LuFe 2 O 4 , is reported in single‐layer epitaxial LuFeO 3 thin films. Atomic‐scale electron microscopy investigations reveal the spontaneous organization of ferroelectric polarization in each building block, which forms a series of polar configurations. Specifically, the charge and lattice of neighboring LuFeO 3 and LuFe 2 O 4 blocks are closely coupled with competing degrees of freedom. A combination of the quantitative analysis of atomically resolved images and spectroscopy with theoretical calculations determines how charge‐ordering‐induced polarization accommodates charge naturality across the interfaces to reduce the system energy and unravels the formation mechanism of this heterostructure. The results point to the possibilities of generation and control of multiferroic self‐assembled systems, which may provide a basis for engineering novel materials with emergent properties.

Deng, Shiqing↗

Light Emission Characteristics and Mechanics of Foldable Inorganic Light-Emitting Diodes

Strategies are presented for forming inorganic, microscale light emitting diodes in interconnected arrays on plastic substrates, configured to accommodate extreme levels of bending, with negligible changes in the electrical properties or the emission wavelengths in the devices. Furthermore, the studies include quantitative analysis of the underlying mechanics and experimental measurements of bending induced shifts in the emission wavelength.

Inorganics on plastic substrate↗

A Lithography‐Free and Field‐Programmable Photonic Metacanvas

Abstract The unique correspondence between mathematical operators and photonic elements in wave optics enables quantitative analysis of light manipulation with individual optical devices. Phase‐transition materials are able to provide real‐time reconfigurability of these devices, which would create new optical functionalities via (re)compilation of photonic operators, as those achieved in other fields such as field‐programmable gate arrays (FPGA). Here, by exploiting the hysteretic phase transition of vanadium dioxide, an all‐solid, rewritable metacanvas on which nearly arbitrary photonic devices can be rapidly and repeatedly written and erased is presented. The writing is performed with a low‐power laser and the entire process stays below 90 °C. Using the metacanvas, dynamic manipulation of optical waves is demonstrated for light propagation, polarization, and reconstruction. The metacanvas supports physical (re)compilation of photonic operators akin to that of FPGA, opening up possibilities where photonic elements can be field programmed to deliver complex, system‐level functionalities.

Dong, Kaichen↗

Electrolyte Design for Fast‐Charging Lithium‐Based Batteries

Fast charging is essential for the widespread adoption of lithium (Li)-ion batteries, but it is fundamentally limited by sluggish interfacial kinetics, Li plating, and electrolyte instability at high current densities. Over the past decade, electrolyte engineering has emerged as a key strategy to address these challenges. This review summarizes the development of fast-charging electrolytes over the past ten years and outlines a design framework. Electrolyte formulations are first deconstructed into their main components—solvents, salts, and functional additives—and representative strategies for tuning solvation structure and interphase chemistry are discussed to suppress Li plating and improve interfacial kinetics. The discussion then extends to advanced electrolyte systems, particularly localized high-concentration electrolytes (LHCEs), and their compatibility with different anode chemistries. Advanced characterization techniques are also summarized and categorized based on destructiveness, spatial and temporal resolution, quantitative analysis, and the chemical species or processes probed across multiple length scales. Recent progress in AI-enabled electrolyte discovery and battery management system (BMS) strategies for optimized fast-charging protocols is further highlighted. Finally, perspectives are presented on translating electrolyte innovations from academic research to practical applications, with emphasis on cell format, realistic operating conditions, and manufacturability.

25 ENERGY STORAGE↗

Microfabricated systems and assays for studying the cytoskeletal organization, micromechanics, and motility patterns of cancerous cells

Cell motions are driven by coordinated actions of the intracellular cytoskeleton – actin, microtubules (MTs) and substrate/focal adhesions (FAs). This coordination is altered in metastatic cancer cells resulting in deregulated and increased cellular motility. Microfabrication tools, including photolithography, micromolding, microcontact printing, wet stamping and microfluidic devices have emerged as a powerful set of experimental tools with which to probe and define the differences in cytoskeleton organization/dynamics and cell motility patterns in non-metastatic and metastatic cancer cells. In this paper, we discuss four categories of microfabricated systems: (i) micropatterned substrates for studying of cell motility sub-processes (for example, MT targeting of FAs or cell polarization); (ii) systems for studying cell mechanical properties, (iii) systems for probing overall cell motility patterns within challenging geometric confines relevant to metastasis (for example, linear and ratchet geometries), and (iv) microfluidic devices that incorporate co-cultures of multiple cell types and chemical gradients to mimic in vivo intravasation/extravasation steps of metastasis. Finally, together, these systems allow for creating controlled microenvironments that not only mimic complex soft tissues, but are also compatible with live cell high-resolution imaging and quantitative analysis of single cell behavior.

59 BASIC BIOLOGICAL SCIENCES↗

Self-assembly of DNA functionalized gold nanoparticles at the liquid-vapor interface

Here, surface sensitive synchrotron X-ray scattering and spectroscopy are used to monitor and characterize the spontaneous formation of 2D Gibbs monolayers of thiolated single-stranded DNA-functionalized gold nanoparticles (ssDNAAuNPs) at the vapor–solution interface by manipulating salt concentrations. Grazing incidence small-angle X-ray scattering and X-ray refl ectivity show that the noncomplementary ssDNA-AuNPs dispersed in aqueous solution spontaneously accumulate at the vapor–liquid interface in the form of a single layer by increasing MgCl 2 or CaCl 2 concentrations. Furthermore, the monoparticle layer undergoes a transformation from short- to long-range (hexagonal) order above a threshold salt-concentration. Using various salts at similar ionic strength to those of MgCl 2 or CaCl 2 such as, NaCl or LaCl 3 , it is found that surface adsorbed NPs lack any order. X-ray fluorescence near total reflection of the same samples provides direct evidence of interfacial gold and more importantly a significant surface enrichment of the cations. Quantitative analysis reveals that divalent cations screen the charge of ssDNA, and that the hydrophobic hexyl-thiol group, commonly used to functionalize the ssDNA (for capping the AuNPs), is likely the driving force for the accumulation of the NPs at the interface.

36 MATERIALS SCIENCE↗

Multimodal Nanoscale Tomographic Imaging for Battery Electrodes

Accurate representations of the 3D structure within a lithium-ion battery are key to understanding performance limitations. However, obtaining exact reconstructions of electrodes, where the active particles, the carbon black and polymeric binder domain, and the pore space are visualized is challenging. In this work, it is shown that multimodal imaging can be used to overcome this challenge. High-resolution ptychographic X-ray computed tomography are combined with lower resolution but higher contrast transmission X-ray tomographic microscopy to obtain 3D reconstructions of pristine and cycled graphite-silicon composite electrodes. This cross-correlation enables quantitative analysis of the surface of active particles, including the heterogeneity of carbon-black and binder domain and solid-electrolyte interphase coverage. Capturing the active particles as well as the carbon black-binder domain allows using these segmented structures for electrochemical simulations to highlight the influence of the particle embedding on local state of charge heterogeneities.

25 ENERGY STORAGE↗

X-ray Phase Contrast Imaging of Calcified Tissue and Biomaterial Structure in Bioreactor Engineered Tissues

Tissues engineered in bioreactor systems have been used clinically to replace damaged tissues and organs. In addition, these systems are under continued development for many tissue engineering applications. The ability to quantitatively assess material structure and tissue formation is critical for evaluating bioreactor efficacy and for preimplantation assessment of tissue quality. These techniques allow for the nondestructive and longitudinal monitoring of large engineered tissues within the bioreactor systems and will be essential for the translation of these strategies to viable clinical therapies. X-ray Phase Contrast (XPC) imaging techniques have shown tremendous promise for a number of biomedical applications owing to their ability to provide image contrast based on multiple X-ray properties, including absorption, refraction, and scatter. In this research, mesenchymal stem cell-seeded alginate hydrogels were prepared and cultured under osteogenic conditions in a perfusion bioreactor. The constructs were imaged at various time points using XPC microcomputed tomography (µCT). Imaging was performed with systems using both synchrotron- and tube-based X-ray sources. XPC µCT allowed for simultaneous three-dimensional (3D) quantification of hydrogel size and mineralization, as well as spatial information on hydrogel structure and mineralization. Samples were processed for histological evaluation and XPC showed similar features to histology and quantitative analysis consistent with the histomorphometry. Furthermore, these results provide evidence of the significant potential of techniques based on XPC for noninvasive 3D imaging engineered tissues grown in bioreactors.

alginate microbeads↗

The impact of alkali‐ion intercalation on redox chemistry and mechanical deformations: Case study on intercalation of Li, Na, and K ions into FePO 4 cathode

Abstract Batteries made of charge carriers from Earth‐crust abundant materials (e.g., Na, K, and Mg) have received extensive attention as an alternative to Li‐ion batteries for grid storage. However, a lack of understanding of the behavior of these larger ions in the electrode materials hinders the development of electrode structures suitable for these large ions. In this study, we investigate the impact of alkali ions (Li, Na, and K) on the redox chemistry and mechanical deformations of iron phosphate composite cathodes by using electrochemical techniques and in situ digital image correlation. Na‐ion and Li‐ion intercalation demonstrate a nearly linear correlation between electrochemical strains and the state of charge and discharge. The strain development shows nonlinear dependance on the state of charge and discharge for K ions. Strain rate calculations show that K ion intercalation results in a progressive increase in the strain rate for all cycles. Li and Na intercalation induce nearly constant strain rates with the exception of the first discharge cycle of Na intercalation. When the same amount of ions are inserted into the electrode, the electrode shows the lowest strain generation upon Li intercalation compared to larger alkali ions. Na and K ions induce similar volumetric changes in the electrode when the state of charge and discharge is around 30%. Although the electrode experiences larger absolute strain generation at the end of the discharge cycles upon Na intercalation, strain rates were found to be greater for K ions. Potential‐dependent behaviors also demonstrate more sluggish redox reactions during K intercalation, compared to Li and Na. Our quantitative analysis suggests that the strain rate, rather than the absolute value of strain, is the critical factor in amorphization of the crystalline electrode.

25 ENERGY STORAGE↗

Photochemical Reactions of Poly(4-vinylphenol) Thin Films

The mechanism involved in the photochemical immobilization of poly(4-vinylphenol) (PVP) thin films was investigated. The films were fabricated by a simple procedure of UV irradiation and solvent extraction. A combination of ellipsometry, IR, and high-resolution x-ray photoelectron spectroscopy (XPS) were used to provide detailed and quantitative analysis of the composition of the photochemical reaction products. Upon irradiation at 260 nm, benzyl and phenoxy radicals are generated in the polymer. In the absence of oxygen, PVP films crosslink via the combination of the benzyl radicals or phenoxy radicals. At lower irradiation doses, the photochemical process was dominated by crosslinking of the polymer backbone via the combination of benzyl radicals. At higher exposure doses, phenoxy radicals were generated producing crosslinked quinoid structures. The concentration increased 2 with the irradiation time and thus the percentage of the crosslinked quinoid structures. No oxidation or degradation products were observed. In the presence of oxygen, additional reactions of oxidation and degradation occurred. At lower doses, oxidation at the benzyl position produced the ketone structure evidenced by the drastic increase the O content in the irradiated films. As the irradiation doses increased, further oxidation at the methylene position occurred, and in addition, volatile and degradation products were also generated. This photochemical process was successfully employed to fabricate patterned PVP structures. Photolithography at lower doses followed by solvent development created negative-tone PVP patterns. Irradiating the film at higher doses generated “pseudo” positive-tone patterns after the volatile products in the irradiated areas left the film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Watersheds and stream networks viewed longitudinally: Example insights from novel spatial portrayals of watershed characteristics

Abstract Longitudinal depictions of watershed structure and characteristics, including topography, stream networks, wetlands, ground water levels, and land use, can provide watershed knowledge and understanding unavailable from standard plan view maps. Three case studies provide examples of knowledge gained by applying longitudinal views of stream networks, watershed hydrologic behavior, and land use distributions. Longitudinal views of mountain stream networks show extreme variability in the slope‐area relationships of low Strahler order streams, large discontinuities in drainage area (large parts of drainage area space are absent in networks), and large variations in network curvature. Longitudinal views of a groundwater‐dominated headwater watershed increase the inference available from limited groundwater observations and clearly reveal how groundwater connections affect the permanence of surface water features and the distribution of vadose zone storage in the landscape. Plotting land uses longitudinally illuminates and allows a quantitative analysis of how land uses are distributed relative to topographic position. Viewing watersheds and stream networks longitudinally can provide new insights into watershed forms and processes and motivate new questions and research.

60 APPLIED LIFE SCIENCES↗

Wake steering of multirotor wind turbines

Abstract In this paper, wake steering is applied to multirotor turbines to determine whether it has the potential to reduce wind plant wake losses. Through application of rotor yaw to multirotor turbines, a new degree of freedom is introduced to wind farm control such that wakes can be expanded, channelled or redirected to improve inflow conditions for downstream turbines. Five different yaw configurations are investigated (including a baseline case) by employing large‐eddy simulations (LES) to generate a detailed representation of the velocity field downwind of a multirotor wind turbine. Two lower‐fidelity models from single‐rotor yaw studies (curled‐wake model and analytical Gaussian wake model) are extended to the multirotor case, and their results are compared with the LES data. For each model, the wake is analysed primarily by examining wake cross‐sections at different downwind distances. Further quantitative analysis is carried out through characterisations of wake centroids and widths over a range of streamwise locations and through a brief analysis of power production. Most significantly, it is shown that rotor yaw can have a considerable impact on both the distribution and magnitude of the wake velocity deficit, leading to power gains for downstream turbines. The lower‐fidelity models show small deviation from the LES results for specific configurations; however, both are able to reasonably capture the wake trends over a large streamwise range.

17 WIND ENERGY↗

Highly accelerated life testing (HALT): A review from a statistical perspective

Despite its use in one form or another for at least four decades, HALT and related techniques [e.g., highly accelerated-stress screening (HASS) and stress audits (HASA)] are not well understood within the statistical community and remain controversial. This largely reflects a conflict in motivation between engineers, testing under harsh conditions to discover and eliminate failure modes, and statisticians, taking a more cautious approach to develop quantitative estimates of parameters such as mean time between failures (MTBF). Here, this review article will clarify HALT concepts and methods and explain where it fits within the universe of methods that involve the application of accelerating factors to compress the time required to evaluate or enhance product reliability. A major distinction is between methods such as HALT, a high-stress test-analyze-fix-test iterative process directed at improving reliability by discovering and fixing weak points in a design, and quantitative accelerated life testing (QALT), whose goal is the estimation of product life for a fixed design. We discuss methods such as physics of failure that offer some hope of bridging the gap between the qualitative nature of HALT, and purely quantitative statistical methods. We present a variety of engineering applications of HALT including metal fatigue, piping and pressure vessels, structural damage, radiation damage, and rotating machinery. We also discuss potential synergies between HALT and QALT, such as rapid identification, through HALT, of failure modes requiring quantitative analysis. For further study, extensive references to the applicable literature are provided as well as an appendix that describes related methods.

97 MATHEMATICS AND COMPUTING↗

China’s Booming Plug-in Electric Vehicle Market—How Will It Continue?

The plug-in electric vehicle (PEV) is recognized as a pivotal component in transportation energy security and technology innovation in China. With government incentives and substantial capital investments, the Chinese PEV market has become one of the largest in the world. However, is this market boom ephemeral or will it be continuing? This chapter provides a general review of the Chinese PEV market mainly from the consumer per-spective, by summarizing the characteristics of the vehicle policies and consumer concerns in the PEV market in recent years. Moreover, it intro-duces detailed examples on how the policies, technologies, and infrastruc-ture shape the market. In addition to employing large amounts of reliable data from the China Automotive Technology and Research Center for the review, the authors also adopted a quantitative analysis tool—the New Energy and Oil Consumption Credits model—to project the potential in-dustrial impacts of the government policies in multiple scenarios. Based on the findings, it seems that the prosperity of the PEV market, incentivized by the government, will continue in the short run. The direct subsidies to PEV from the government will gradually phase out, and the supply-side push policies such as the dual-credit policy and other charging infrastruc-ture incentives will work as the invisible hand to force the automakers to invest more in the PEV segment. However, in the long run, innovation in PEV technology and business models, together with consumer acceptance will be the major factors that can sustain further market growth.

Ou, Shawn↗

L$_{μ}$ − L$_{τ}$ gauge bosons in beam dumps and supernovae

We study the phenomenology of a sub-GeV L$_{μ}$ − L$_{τ}$ gauge boson. We find discrepancies with existing literature in sensitivity projections for the upcoming SHiP experiment and in the treatment of supernovae cooling constraints. We present a quantitative analysis of different production modes in beam dumps and compare our results to previous work. In the context of supernovae, we re-evaluate the standard supernova cooling bounds from SN1987A and analyze additional supernova-based probes: diffusive cooling, constraints from the existence of low-energy supernovae, and the absence of a high-energy neutrino signal from SN1987A.

Blinov, Nikita [York U., Canada] (ORCID:0000000228↗

Liver metastases of neuroendocrine tumors: is it possible to diagnose different histologic subtypes depending on multiphasic CT features?

Purpose: To assess and compare the multiphasic computed tomography (CT) features of neuroendocrine tumor (NET) liver metastases and to investigate the possibility to predict the histologic subtype of the primary tumor. Materials and methods: Between January 2013 and December 2017 patients with biopsy proven NET with at least one liver metastasis who underwent multiphasic CT were enrolled in this study. All cases were acquired using a standardized multiphasic liver CT protocol, arterial, portal, and hepatic venous phases were obtained. Images were retrospectively analyzed in consensus by two abdominal radiologists blinded to clinical data and histologic subtype. The size, number, and location of lesions were noted. Enhancement patterns of each lesion on arterial, portal, and hepatic venous phases were assessed. For quantitative analysis, CT attenuation of tumors, liver parenchyma, and aorta were measured using a circular region of interest (ROI) on arterial, portal, and hepatic venous phases for reflecting the blood supply of the tumor. Tumor-to-aorta and tumor-to-liver ratio were calculated in all three phases. Differences between subtypes of NET liver metastases were studied using ROC analysis of clustered data. Results: A total of 255 neuroendocrine tumor liver metastases divided into 101 (39.6%) pancreatic, 60 (23.5%) gastroenteric and 94 (36.8%) lung NET liver metastases were analyzed. Contrast enhancement of lesions was homogeneous in 78% of patients (n = 199), which was significantly more frequent in patients with pancreatic group than in those with gastroenteric origin (n = 90, 89.1% vs. n = 28, 46.7%; p < 0.001). Gastroenteric NET metastases frequently showed heterogeneous enhancement, which was significantly higher than in the other two groups (50% vs. 3% and 2%). With respect to the location of the primary tumor, the difference in enhancement patterns of the liver lesions was statistically significant (p < 0.001). Pancreatic NET metastases were mostly hyperdense on arterial images and isodense on portal and hepatic venous phase images (79.2%, n = 80). Gastroenteric NET metastases were mostly hyperdense on arterial phase images and hypodense on portal and hepatic venous phase images (n = 28, 46.7%). The most frequent pattern for lung NET metastases was hypoattenuation on all three phase images (n = 44, 46.8%). ROC analysis of clustered data revealed statistically significant differences between pancreatic NET liver metastases, gastroenteric NET liver metastases, and lung NET liver metastases in terms of tumor-to-aorta (T–A) ratio and tumor-to-liver (T–L) ratio (p < 0.001). Conclusion: We observed statistically significant differences in multiphasic CT features (enhancement pattern, T–A ratio, and T–L ratio) between histologic subtypes of NET liver metastases. As the difference in histological subtypes of NET liver metastases results in a different prognosis and different management strategy, these CT features might help to identify the primary tumor when it is not known to ensure accurate tumor staging and to provide optimal treatment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗