Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Heavily doped GaAs:Te layers grown by MOVPE using diisopropyl telluride as a source

The capabilities of GaAs epitaxial layers extremely heavily doped with tellurium by metal-organic vapor-phase epitaxy using diisopropyl telluride as a source are studied. It is shown that tellurium incorporation into GaAs occurs to an atomic concentration of 10{sup 21} cm{sup –3} without appreciable diffusion and segregation effects. Good carrier concentrations (2 × 10{sup 19} cm{sup –3}) and specific contact resistances of non-alloyed ohmic contacts (1.7 × 10{sup –6} Ω cm{sup 2}) give grounds to use such layers to create non-alloyed ohmic contacts in electronic devices. A sharp decrease in the electrical activity of Te atoms, a decrease in the electron mobility, and an increase in the contact resistance at atomic concentrations above 2 × 10{sup 20} cm{sup –3} are detected.

36 MATERIALS SCIENCE↗

Spatial Mapping of Thermal Boundary Conductance at Metal–Molybdenum Diselenide Interfaces

Improving the thermal transport across interfaces is a necessary consideration for micro- and nanoelectronic devices and necessitates accurate measurement of the thermal boundary conductance (TBC) and understanding of transport mechanisms. Two-dimensional transition-metal dichalcogenides (TMDs) have been studied extensively for their electrical properties, including the metal–TMD electrical contact resistance, but the thermal properties of these interfaces are significantly less explored irrespective of their high importance in their electronic devices. We isolate individual islands of MoSe 2 grown by chemical vapor deposition using photolithography and correlate the 2D variation of TBC with optical microscope images of the MoSe 2 islands. We measure the 2D spatial variation of the TBC at metal–MoSe 2 –SiO 2 interfaces using a modified time-domain thermoreflectance (TDTR) technique, which requires much less time than full TDTR scans. The thermoreflectance signal at a single probe delay time is compared with a correlation curve, which enables us to estimate the change in the signal with respect to the TBC at the metal–MoSe 2 –SiO 2 interface as opposed to recording the decay of the thermoreflectance signal over delay times of several nanoseconds. The results show a higher TBC across the Ti–MoSe 2 –SiO 2 interface compared to Al–MoSe 2 –SiO 2 . An image-clustering method is developed to differentiate the TBC for different numbers of MoSe 2 layers, which reveals that the TBC in single-layer regions is higher than that in the bilayer. Finally, we perform traditional TDTR measurements over a range of delay times and verify that TBC is higher at the Ti–MoSe 2 –SiO 2 interface compared to Al–MoSe 2 –SiO 2 , highlighting the importance of the choice of metal for heat dissipation at electrical contacts in TMD devices.

22 interfacial↗

Non-degenerate parametric mixing and Q-enhancement in ALN Lamb wave resonator

In this Letter, we explore a non-degenerate phase independent parametric quality factor (Q)-enhancement technique for aluminum nitride (AlN) Lamb wave resonators. Unlike other active Q-enhancement techniques which require precise phase control of the electronic feedback loop, this technique is implemented by parametrically pumping AlN material stiffness to realize a negative resistance seen at the signal path. The negative resistance is dependent on the nonlinear material modulation and multi-resonance coupling in the device. A nonlinear circuit model is developed to simulate the parametric coupling of each resonance and extract the nonlinearity of AlN from experimental data. With proper pump frequency and pump power, the device quality factor is boosted in both simulation and experiment. The demonstrated Q-enhancement method is simple to implement and can be applied to other types of resonators that have nonlinear behavior and support multi-resonance operation.

42 ENGINEERING↗

Spatially controlled doping of two-dimensional SnS 2 through intercalation for electronics

Doped semiconductors are the most important building elements for modern electronic devices. In silicon-based integrated circuits, facile and controllable fabrication and integration of these materials can be realized without introducing a high-resistance interface. Besides, the emergence of two-dimensional (2D) materials enables the realization of atomically thin integrated circuits. However, the 2D nature of these materials precludes the use of traditional ion implantation techniques for carrier doping and further hinders device development10. Here, we demonstrate a solvent-based intercalation method to achieve p-type, n-type and degenerately doped semiconductors in the same parent material at the atomically thin limit. In contrast to naturally grown n-type S-vacancy SnS 2 , Cu intercalated bilayer SnS 2 obtained by this technique displays a hole field-effect mobility of ~40 cm 2 V -1 s -1 , and the obtained Co-SnS 2 exhibits a metal-like behaviour with sheet resistance comparable to that of few-layer graphene. Combining this intercalation technique with lithography, an atomically seamless p–n–metal junction could be further realized with precise size and spatial control, which makes in-plane heterostructures practically applicable for integrated devices and other 2D materials. Therefore, the presented intercalation method can open a new avenue connecting the previously disparate worlds of integrated circuits and atomically thin materials.

36 MATERIALS SCIENCE↗

Synthesis of ZrO{sub 2} nanoparticles by hydrothermal treatment

Zirconium oxide (zirconia, ZrO{sub 2}) is the most common material used for electrolyte of solid oxide fuel cells (SOFCs). Zirconia has attracted attention for applications in optical coatings, buffer layers for growing superconductors, thermal-shield, corrosion resistant coatings, ionic conductors, and oxygen sensors, and for potential applications including transparent optical devices and electrochemical capacitor electrodes, fuel cells, catalysts, and advanced ceramics. In this work, zirconia particles were synthesized from ZrCl{sub 4} precursor with hydrothermal treatment in a batch reactor. Hydrothermal treatment may allow obtaining nanoparticles and sintered materials with controlled chemical and structural characteristics. Hydrothermal treatment was carried out at temperatures of 150 – 200°C with precursor concentration of 0.1 – 0.5 M. Zirconia particles obtained from this treatment were analyzed by using SEM, PSD and XRD to characterize the morphology, particle size distribution, and crystallinity, respectively. Based on the analysis, the size of zirconia particles were around 200 nm and it became smaller with decreasing precursor concentration. The increasing temperature caused the particles formed having uniform size. Zirconia particles formed by hydrothermal treatment were monoclinic, tetragonal and cubic crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Statistical Analysis of Intertube Tunneling Contacts in the Macroscopic Electrical Conductivity of Carbon Nanotube Fibers

Here, this study investigates the influence of tunneling contact resistances between carbon nanotubes (CNTs) on electron transport and electrical conductivity of macroscopic carbon nanofibers (CNFs), which profoundly impacts the performance of CNT thin film electronics, CNF electron emitters and cathodes, and energy conversion and storage devices. Utilizing a self-consistent electrical contact model coupling a transmission line model with tunneling current, we calculate the contact resistances of a plethora of CNT-CNT contacts within a CNF fiber, which consists of aligned, densely packed CNTs. A statistical analysis is conducted, using Gaussian distributions to account for variations in contact lengths, tunneling gap distances, and single CNT aspect ratios, to calculate the CNT-CNT contact resistance and the overall resistance of CNT fiber. By scaling our model to a macroscopic level, our results are in good agreement with experimental measurements. Our calculation suggests that while increasing the contact overlap length diminishes individual CNT-CNT contact resistance, it could paradoxically increase macroscopic CNT fiber resistance for a given constant CNF mass density, which is due to that fact that a larger overlap length allows more CNTs to pack along an electrical conduction path per unit length, leading to more tunneling contact junctions connected in series and thus less number of parallel conduction paths within the fiber cross section. Increasing tunneling gap distance increases both individual contact and overall fiber resistance. This research provides a simple design tool for tailoring CNT fiber electrical properties to promote real-world applications using CNTs or similar low-dimensional materials.

36 MATERIALS SCIENCE↗

A Microfluidic DNA Library Preparation Platform for Next-Generation Sequencing

Next-generation sequencing (NGS) is emerging as a powerful tool for elucidating genetic information for a wide range of applications. Unfortunately, the surging popularity of NGS has not yet been accompanied by an improvement in automated techniques for preparing formatted sequencing libraries. To address this challenge, we have developed a prototype microfluidic system for preparing sequencer-ready DNA libraries for analysis by Illumina sequencing. Our system combines droplet-based digital microfluidic (DMF) sample handling with peripheral modules to create a fully-integrated, sample-in library-out platform. In this report, we use our automated system to prepare NGS libraries from samples of human and bacterial genomic DNA. E. coli libraries prepared on-device from 5 ng of total DNA yielded excellent sequence coverage over the entire bacterial genome, with .99% alignment to the reference genome, even genome coverage, and good quality scores. Furthermore, we produced a de novo assembly on a previously unsequenced multi-drug resistant Klebsiella pneumoniae strain BAA-2146 (KpnNDM). The new method described here is fast, robust, scalable, and automated. Our device for library preparation will assist in the integration of NGS technology into a wide variety of laboratories, including small research laboratories and clinical laboratories.

59 BASIC BIOLOGICAL SCIENCES↗

Fabrication of reproducible sub-5 nm nanogaps by a focused ion beam and observation of Fowler-Nordheim tunneling

Creating a stable high resistance sub-5 nm nanogap in between conductive electrodes is one of the major challenges in the device fabrication of nano-objects. Gap-sizes of 20 nm and above can be fabricated reproducibly by the precise focusing of the ion beam and careful milling of the metallic lines. Here, by tuning ion dosages starting from 4.6 × 10{sup 10} ions/cm and above, reproducible nanogaps with sub-5 nm sizes are milled with focused ion beam. The resistance as a function of gap dimension shows an exponential behavior, and Fowler-Nordheim tunneling effect was observed in nanoelectrodes with sub-5 nm nanogaps. The application of Simmon's model to the milled nanogaps and the electrical analysis indicates that the minimum nanogap size approaches to 2.3 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene

The instability of hybrid perovskite materials due to water and moisture arises as one major challenge to be addressed before any practical application of the demonstrated high efficiency perovskite solar cells. Here we report a facile strategy that can simultaneously enhance the stability and efficiency of p-i-n planar heterojunction-structure perovskite devices. Crosslinkable silane molecules with hydrophobic functional groups are bonded onto fullerene to make the fullerene layer highly water-resistant. Methylammonium iodide is introduced in the fullerene layer for n-doping via anion-induced electron transfer, resulting in dramatically increased conductivity over 100-fold. With crosslinkable silane-functionalized and doped fullerene electron transport layer, the perovskite devices deliver an efficiency of 19.5% with a high fill factor of 80.6%. Furthermore, a crosslinked silane-modified fullerene layer also enhances the water and moisture stability of the non-sealed perovskite devices by retaining nearly 90% of their original efficiencies after 30 days’ exposure in an ambient environment.

14 SOLAR ENERGY↗

Performance Enhancement of PFET Planar Devices by Plasma Immersion Ion Implantation (P3I)

A study of doping the pMOS Lightly Doped Drain (LDD) by Plasma Immersion Ion Implantation (P3i) with BF3 is presented which demonstrates a better transistor performance compared to standard beam line Ion Implantation (I/I). The benefit of P3i comes from the broad angular distribution of the impinging ions thereby doping the poly-silicon gate sidewall as well. Gate capacitance of short channel devices has been measured and clearly shows this improvement. This model is clearly supported by high resolution 2D-carrier profiles using Scanning Spreading Resistance Microscopy (SSRM) which shows this gate sidewall doping. The broad angular distribution also implies a smaller directional sensitivity (to for instance the detailed gate edge shape) and leads to devices which are perfectly balanced, when Source and Drain electrode are switched.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-resolution chemical patterns from negative tone resists for the integration of extreme ultraviolet patterns of metal-oxide resists with directed self-assembly of block copolymers

Extreme ultraviolet (EUV) lithography faces significant challenges in designing suitable resist materials that can provide adequate precision, while maintaining economically viable throughput. These challenges in resist materials have led to printing failures and high roughness in EUV patterns, compromising the performance of semiconductor devices. Integrating directed self-assembly (DSA) of block copolymers (BCPs) with EUV lithography offers a promising solution because, while the BCPs register to the EUV-defined chemical guiding pattern, the thermodynamically determined structures of the BCPs automatically rectify defects and roughness in the EUV pattern. Despite the superior resolution of metal-oxide EUV resists (MORs), their application to DSA is limited by the difficulty in converting them into chemical patterns that allow effective transfer of the rectified patterns of DSA films into inorganic materials. To address this challenge, this study introduces a novel strategy for fabricating chemical patterns using hydrogen silsesquioxane (HSQ), a high-resolution negative tone inorganic resist, as a model system for MORs. Initially, a sacrificial Cr pattern is generated from HSQ patterns via reactive ion etching. The sacrificial Cr pattern is converted into a chemical pattern by first grafting a water-soluble polyethylene oxide brush onto the substrate, then wet etching the Cr, and finally grafting nonpolar polystyrene brushes. Assembling polystyrene-block-poly(methyl methacrylate) on these patterns results in structures oriented and registered with the underlying pattern, achieving 24 nm full-pitch resolutions. In conclusion, this approach has the potential to integrate MOR patterns into the DSA process, thereby enabling the generation of high-quality sub-10 nm patterns with high-χ BCPs.

Atomic force microscopy↗

A molecular design approach towards elastic and multifunctional polymer electronics

Next-generation wearable electronics require enhanced mechanical robustness and device complexity. Besides previously reported softness and stretchability, desired merits for practical use include elasticity, solvent resistance, facile patternability and high charge carrier mobility. Here, we show a molecular design concept that simultaneously achieves all these targeted properties in both polymeric semiconductors and dielectrics, without compromising electrical performance. This is enabled by covalently-embedded in-situ rubber matrix (iRUM) formation through good mixing of iRUM precursors with polymer electronic materials, and finely-controlled composite film morphology built on azide crosslinking chemistry which leverages different reactivities with C–H and C=C bonds. The high covalent crosslinking density results in both superior elasticity and solvent resistance. When applied in stretchable transistors, the iRUM-semiconductor film retained its mobility after stretching to 100% strain, and exhibited record-high mobility retention of 1 cm 2 V -1 s -1 after 1000 stretching-releasing cycles at 50% strain. The cycling life was stably extended to 5000 cycles, five times longer than all reported semiconductors. Furthermore, we fabricated elastic transistors via consecutively photo-patterning of the dielectric and semiconducting layers, demonstrating the potential of solution-processed multilayer device manufacturing. The iRUM represents a molecule-level design approach towards robust skin-inspired electronics.

42 ENGINEERING↗

Voltage Control of a van der Waals Spin-Filter Magnetic Tunnel Junction

Atomically thin chromium triiodide (CrI 3 ) has recently been identified as a layered antiferromagnetic insulator, in which adjacent ferromagnetic monolayers are antiferromagnetically coupled. This unusual magnetic structure naturally comprises a series of antialigned spin filters, which can be utilized to make spin-filter magnetic tunnel junctions with very large tunneling magnetoresistance (TMR). Here we report voltage control of TMR formed by four-layer CrI 3 sandwiched by monolayer graphene contacts in a dual-gated structure. By varying the gate voltages at fixed magnetic field, the device can be switched reversibly between bistable magnetic states with the same net magnetization but drastically different resistance (by a factor of 10 or more). Also, without switching the state, the TMR can be continuously modulated between 17,000% and 57,000%, due to the combination of spin-dependent tunnel barrier with changing carrier distributions in the graphene contacts. Our work shows new kinds of magnetically moderated transistor action and opens up possibilities for voltage-controlled van der Waals spintronic devices.

2D magnets↗

Surface leakage reduction in narrow band gap type-II antimonide-based superlattice photodiodes

Inductively coupled plasma (ICP) dry etching rendered structural and electrical enhancements on type-II antimonide-based superlattices compared to those delineated by electron cyclotron resonance (ECR) with a regenerative chemical wet etch. The surface resistivity of 4x10{sup 5} {omega} cm is evidence of the surface quality achieved with ICP etching and polyimide passivation. By only modifying the etching technique in the fabrication steps, the ICP-etched devices with a 9.3 {mu}m cutoff wavelength revealed a diffusion-limited dark current density of 4.1x10{sup -6} A/cm{sup 2} and a maximum differential resistance at zero bias in excess of 5300 {omega} cm{sup 2} at 77 K, which are an order of magnitude better in comparison to the ECR-etched devices.

36 MATERIALS SCIENCE↗

Self-consistent integrated modeling of combined hybrid discharge-laser produced plasma devices for extreme ultraviolet metrology

Discharge- and laser-produced plasma (DLPP) devices are being used as light sources for extreme ultraviolet (EUV) generation. A key challenge for both, DPP and LPP, is achieving sufficient brightness to support the throughput requirements of nanometrology tools. To simulate the environment of a hybrid DLPP device and optimize the EUV output, we have developed an integrated HEIGHTS-DLPP computer simulation package. The package integrates simulation of two evolving plasmas (DPP and LPP) and includes modeling of a set of integrated self-consistent processes: external power source and plasma energy balance, plasma resistive magnetohydrodynamics, plasma heat conduction, detailed radiation transport (RT), and laser absorption and refraction. We simulated and optimized DLPP devices using Xe gas as a target material. We synchronized the external circuit parameters, chamber gas parameters, and laser beam temporal and spatial profiles to achieve maximum EUV output. The full 3D Monte Carlo scheme was integrated for detailed RT and EUV output calculations in Xe using more than 3600 spectral groups. The modeling results are in good agreement with Julich Forschungszentrum experimental data. Theoretical models, developed and integrated into the HEIGHTS package, showed wide capabilities and flexibility. In conclusion, the models and package can be used for optimization of the experimental parameters and settings, investigation of DLPP devices with complex design, analyzing the impact of integrated spatial effects and working timeline arrangement on the final EUV output, and EUV source size, shape, and angular distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Towards a graphene-based quantum impedance standard

Precision measurements of the quantum Hall resistance with alternating current (ac) in the kHz range were performed on epitaxial graphene in order to assess its suitability as a quantum standard of impedance. The quantum Hall plateaus measured with alternating current were found to be flat within one part in 10{sup 7}. This is much better than for plain GaAs quantum Hall devices and shows that the magnetic-flux-dependent capacitive ac losses of the graphene device are less critical. The observed frequency dependence of about −8 × 10{sup −8}/kHz is comparable in absolute value to the positive frequency dependence of plain GaAs devices, but the negative sign is attributed to stray capacitances which we believe can be minimized by a careful design of the graphene device. Further improvements thus may lead to a simpler and more user-friendly quantum standard for both resistance and impedance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large discrete resistance jump at grain boundary in copper nanowire

Copper is the current interconnect metal of choice in integrated circuits. As interconnect dimensions decrease, the resistivity of copper increases dramatically because of electron scattering from surfaces, impurities, and grain boundaries (GBs), and threatens to stymie continued device scaling. Lacking direct measurements of individual scattering sources, understanding of the relative importance of these scattering mechanisms has largely been relied on semi-empirical modeling. Here we present the first attempt to measure and calculate individual GB resistances in copper nanowires with a one-to-one correspondence to the GB structure. Four-probe scanning tunneling microscope measurements show discrete resistance jumps across high-angle random GBs and negligibly small resistances across coincidence boundaries. The latter is substantiated by first-principles calculations, while the former is consistent with the prediction of an intrinsic high resistance for random boundaries from a free-electron boundary scattering model. Such a big difference between these GBs provides vital information for nanoscale interconnect technology.

36 MATERIALS SCIENCE↗