Search NASA⌕ Search

SEARCH · Search NASA

Results for “Randomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Effects of Alcohol Administered with Flibanserin in Healthy Premenopausal Women: A Randomized, Double-Blind, Single-Dose Crossover Study

Abstract Introduction Flibanserin is approved in the United States and Canada for the treatment of hypoactive sexual desire disorder in premenopausal women. Aim The purpose of this trial was to evaluate the safety of concomitant administration of flibanserin with alcohol. Methods In this single-center, randomized, double-blind, single-dose, crossover study, participants were randomly assigned to 1 of 12 sequences to receive each of 7 treatments: flibanserin 100 mg or placebo with ethanol 0.2 g/kg, 0.4 g/kg, or 0.6 g/kg, or flibanserin 100 mg only. Treatments were administered using a worst-case approach that included morning dosing and consumption of alcohol within 10 minutes. Main Outcome Measure The primary end point was the proportion of participants who experienced dizziness, syncope, or hypotension. Safety end points included orthostatic vital signs. Results The study included 96 premenopausal women (mean age 31 ± 8 years). The incidence of dizziness for ethanol + flibanserin was 39.8% for ethanol 0.6 g/kg, 34.1% for 0.4 g/kg, and 27.4% for 0.2 g/kg compared with 31.1% for flibanserin without ethanol. Based on the available vital signs data, there was no effect of ethanol concentration on orthostatic blood pressure, vertigo, or hypotension; no instances of syncope were observed. The overall incidence of adverse events (AEs) was similar when flibanserin was administered alone (96.7%) or with ethanol (90.5–97.6%). Clinical Implications Consumption of the tested amounts of alcohol (0.2–0.6 g/kg) does not have an additive effect on the AE profile of flibanserin 100 mg in healthy premenopausal women. Strengths & Limitations Strengths include the study population (premenopausal women, as indicated for flibanserin) and range of ethanol doses. Limitations include the morning dosing of study medication, which is inconsistent with the bedtime dosing recommended for flibanserin, and the method of handling missing vital sign measurements. Conclusion Co-administration of flibanserin 100 mg with varying doses of ethanol resulted in few AEs of special interest, with no notable alcohol dose response. However, a significantly greater percentage of participants administered flibanserin with 0.6 g/kg and 0.4 g/kg of alcohol were characterized as “Participants in Whom Standing Blood Pressure Was Not Obtained” compared with participants administered flibanserin alone.

Simon, James A.↗

Effective conductivity of particulate polymer composite electrolytes using random resistor network method

The effective DC conductivity of particulate composite electrolytes was obtained by solving electrostatics equations using random resistors network method in three dimensions. The composite structure was considered to consist of three phases: matrix, particulate filler, and conductive shell that surrounded each particle; each phase possessing a different conductivity. Different particle size distributions were generated using Monte Carlo simulations. Unlike effective medium formulations, it was shown that the random resistors network method was able to predict percolation thresholds for the effective composite conductivity. It was found that the mean particle radius has a higher influence on the effective composite conductivity compared to the effect of type of the particle size distributions that were considered. The effect of the shell thickness on the composite conductivity has been investigated. It was found that the conductivity enhancement due to the presence of the conductive shell phase becomes less evident as the shell thickness increases.

36 MATERIALS SCIENCE↗

Scattering of radiofrequency waves by randomly modulated density interfaces in the edge of fusion plasmas

In the scrape-off layer and the edge region of a tokamak, the plasma is strongly turbulent and scatters the radiofrequency (RF) electromagnetic waves that propagate through this region. It is important to know the spectral properties of these scattered RF waves, whether used for diagnostics or for heating and current drive. The spectral changes influence the interpretation of the obtained diagnostic data, and the current and heating profiles. A full-wave, three-dimensional (3-D) electromagnetic code ScaRF has been developed for studying the RF wave propagation through turbulent plasma. ScaRF is a finite-difference frequency-domain (FDFD) method used for solving Maxwell's equations. The magnetized plasma is defined through the cold plasma by the anisotropic permittivity tensor. As a result, ScaRF can be used to study the scattering of any cold plasma RF wave. It can also be used for the study of the scattering of electron cyclotron waves in ITER-type and medium-sized tokamaks such as TCV, ASDEX-U and DIII-D. For the case of medium-sized tokamaks, there is experimental evidence that drift waves and rippling modes are present in the edge region. Hence, we have studied the scattering of RF waves by periodic density interfaces (plasma gratings) in the form of a superposition of spatial modes with varying periodicity and random amplitudes. The power reflection coefficient (a random variable) is calculated for different realizations of the density interface. In this work, the uncertainty of the power reflection coefficient is rigorously quantified by use of the Polynomial Chaos Expansion method in conjunction with the Smolyak sparse-grid integration, which is known as the PCE-SG method. The PCE-SG method is proven to be accurate and more efficient compared with alternative methods such as the Monte Carlo (MC) approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chemically Recyclable Analogs of Styrene–Butadiene Copolymers Enabling Perfectly Linear Ethylene–Styrene Materials with Random Phenyl Distribution

Copolymerization of cyclopentene (CP) and 4-phenylcyclopentene (4PCP) at a full range of comonomer feed ratios is reported using Ru-based ring-opening metathesis polymerization (ROMP) yielding homogeneous copolymers analogous to poly(styrene-ran-1,4-butadiene) and poly(ethylene-ran-styrene) copolymers following hydrogenation under mild conditions. In all cases, total monomer conversions of 86%–92% yielded copolymers with compositions within 4% of monomer feeds. Analysis of equilibrium copolymerization thermodynamics, rarely performed on two cycloolefin monomers with low ring strain energies, provides rational design strategies for negotiating two monomers with different equilibrium monomer concentrations. Inverse-gated decoupled 13 C NMR analysis of dyad sequences on the resulting copolymer microstructures concludes a near-random distribution of comonomer units. The copolymers produced from ROMP have number-average molar masses up to 60 kg mol –1 , moderate dispersities (1.5 ± 0.1), and high trans olefin content (86% ± 2%) while glass-transitions temperatures follow the Fox equation and span the full range between homopolymer extremities of PCP (−96 °C) and P4PCP (17 °C). Unlike most prevulcanized elastomers, these materials undergo facile chemical recycling to monomer, producing complete ring-closing metathesis depolymerization (RCMD) of the polymer back to the CP comonomers. Quantitative olefin hydrogenation produced perfectly linear polyethylene with 4%–16% of the backbone carbons containing a phenyl pendant, analogous to ES copolymers with up to 71.5% w/w styrene units but with random distribution of the aromatic pendants. Thermal properties of these materials are discussed, which span from semicrystalline to amorphous, and with T g values notably less than the reported ES copolymer analogs at similar compositions.

animal feed↗

Strong Near-Infrared Solid Emission and Enhanced N-Type Mobility for Poly(naphthalene Diimide) Vinylene by a Random Polymerization Strategy

Organic semiconductors possessing both strong solid emission and charge transport ability are crucial for certain applications such as organic light-emitting transistors and injection lasers, but they are rather rare. Among those which are successful, n-type materials with long emission wavelength are even more scarce. Here, a series of random polymers with the dithiophene unit into a poly(naphthalene diimide) vinylene are synthesized. A strong near-infrared solid emission under wavelength of 730 nm and photoluminescence efficiency of 11.2% is achieved, with an enhanced n-type OFET performance of electron mobility up to 0.011 cm 2 V -1 s -1 . GIXRD and AFM analysis reveal that the introduction with confined dithiophene can improve the localized pi-pi intermolecular interaction, while retaining the overall low crystalline state for thin films of these polymers, which should be the vital factor for balancing the solid emission and charge transport ability. This simple random polymerization strategy might be beneficial in future molecular design for such dual functional materials.materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assembly of Disordered Cocontinuous Morphologies by Multiblock Copolymers with Random Block Sequence and Length Dispersity

Among the wide variety of nanostructures accessible by self-assembly of block copolymers, cocontinuous morphologies are of great interest for separations, catalysis, sensing, and energy storage due to their ability to integrate distinct properties of the constituent polymers. Furthermore, we investigate the tendency to form disordered cocontinuous phases of multiblock copolymers (MBCs) with random block sequence and length dispersity prepared by step-growth polymerization of pre-made telechelic polymers, specifically using thiol-Michael addition between diacrylate functionalized polystyrene (PS) and poly (D,L - lactide) (PLA) chains and a small molecule dithiol. In the phase diagram so established, disordered cocontinuous nanostructures occupy a wide window (≈ 25 % vol) at a modest segregation strength of χN = 15, close to the critical value for microphase separation. At a higher segregation strength of χN = 30, only a moderately wide (≈ 10 vol %) cocontinuous window is found, with MBCs instead tending to form ordered nanostructures. Although the breadth of the cocontinuous widow is less than that found in prior work on analogous randomly end-linked copolymer networks (RECNs), the MBC architecture offers offsetting advantages in terms of solution and melt processability.

36 MATERIALS SCIENCE↗

Analysis of Small-Angle Neutron Scattering from Blends of Charged and Neutral Polymers Based on Rod–Coil Random Phase Approximation

Blends of charged and neutral polymers are of interest due to potential applications in rechargeable batteries. In this study, concentration fluctuations in blends of charged poly[lithium 3-(methacryloyloxy)propylsulfonyl-1-(trifluoromethanesulfonyl)imide] (PLiMTFSI) and neutral poly(ethylene oxide) (PEO) were investigated by small-angle neutron scattering (SANS). The scattering data were analyzed in the framework of the random phase approximation (RPA). Since ion dissociation can lead to stiffening, the charged polymers were approximated as rods, while the neutral polymers were assumed to be random coils. This approach works reasonably well at low weight fractions of charged polymers. For blends with higher weight fractions of the charged polymer, concentration fluctuations were highly suppressed, resulting in q-independent coherent structure factors that are inconsistent with the rod-coil RPA.

Lee, Jaeyong↗

Quasi-Random Multimetallic Nanoparticle Arrays

Here, this paper describes a nanofabrication procedure that can generate multiscale substrates with quasi-random microregions of nanoparticle arrays having different periodicities and metals. We combine cycles of large-area nanoparticle array fabrication with solvent-assisted wrinkle lithography to mask and etch quasi-random areas of prefabricated nanoparticles to control the fill factors of the arrays. The approach is highly flexible, and parameters, including nanoparticle size and material, array geometry, and fill factor, can be tailored independently. Multimetallic nanoparticle arrays can support surface lattice resonances at fill factors as low as 20% and can function as nanoscale cavities for lasing action with as few as 10% of the nanoparticles in an array. We demonstrated that multimetallic nanoparticle substrates that combine two or three arrays with different periodicities can exhibit lasing responses over visible and near-infrared wavelengths. Our work showcases the robust optical responses of multimetallic and periodic devices for broadband light manipulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Random Walk Model for Biomass Particle Mixing in Bubbling Fluidized Beds

We propose a physically motivated random walk model to describe the spatial and temporal mixing of a single biomass particle in a bubbling fluidized bed. The model parameters are estimated from measurements of a magnetically tagged simulated biomass particle in a laboratory fluidized bed. We demonstrate that Monte Carlo simulations using the model match key statistical features of the observed behavior reasonably well. These results suggest that a model of this type can simulate the effects of biomass particle mixing in biomass conversion reactors. We suggest possible improvements to the random walk model and propose how it might be used in conjunction with computational fluid dynamics simulations.

09 BIOMASS FUELS↗

Randomly Layered Superstructure of In 2 O 3 Truncated Nano-Octahedra and Its High-Pressure Behavior

This study outlines the synthesis and characterization of a unique superlattice composed of vertex-truncated indium oxide (In 2 O 3 ) nano-octahedra, along with an exploration of its response to high-pressure conditions. Here, using a bright-field transmission electron microscope (BF-TEM), we determined an average circumradius of 15.2 nm for these octahedral building blocks. The resilience and response of the superlattice to pressure variations, peaking at 18.01 GPa, were examined by employing synchrotron-based Wide-Angle X-ray Scattering (WAXS) and Small-Angle X-ray Scattering (SAXS) techniques. The WAXS data revealed no phase transitions, reinforcing the stability of the 2D superlattice comprised of random layers in alignment with a 2D p31m symmetry. Notably, the SAXS data unveiled a pressure-induced, irreversible octahedron translation and ligand interaction occurring within the random layer. Through our examination of these pressure-sensitive behaviors, we identified a distinctive translation model inherent to octahedra and observed modulation in the superlattice cell parameter induced by pressure. This research signifies a noteworthy progression in deciphering the intricate behaviors of 2D superlattices under high-pressure conditions.

36 MATERIALS SCIENCE↗

Mutual Transformation between Random Nanoparticles and Their Superlattices: The Configuration of Capping Ligand Chains

We presented a facile and efficient route to prepare single-component nanoparticle (NP) superlattices. It was demonstrated that mutual transformation between random NPs and their well-ordered superlattices could be unified by a proposed model of ligand configuration. When the ligand chains capped on NPs were disordered at room temperature, NPs existed separately in solution, which were noninteracting and thus showed random states on transmission electron microscopy (TEM) grids; comparatively, the ligand chains capped on NPs in an ordered state in solution would correspond to superlattice structures obtained on TEM grids. These experimental observations were consistent with our theoretical analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Clipped Random Wave Morphologies and the Analysis of the SAXS of an Ionomer Formed by Copolymerization of Tetrafluoroethylene and CF[subscript 2]=CFO(CF[subscript 2])[subscript 4]SO[subscript 3]H

Using SAXS data, the microstructure of the ionomer formed by copolymerization of tetrafluoroethylene and CF{sub 2}=CFO(CF{sub 2}){sub 4}SO{sub 3}H films has been approached by two methods: a numerical method (the unified fit approach) utilizing a simple model of spherical scattering objects to determine the radius of gyration of different scattering features of the ionomer films and by a graphical method, the clipped random wave approach (CRW), using the scattering data and a porosity parameter to generate a random wave which is clipped to produce a real-space image of the microstructure. We studied films with EW of 733, 825, 900, and 1082 in both the as-cast and annealed 'dry' and boiled 'wet' states. The results of the two data analysis techniques are in good size agreement with each other. In addition, the CRW model show striking similarities to the structure proposed in a recent dissipative particle dynamic models. This has been the first time to our knowledge that the CRW technique has been applied to a PFSA type ionomer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aging power spectrum of membrane protein transport and other subordinated random walks

Single-particle tracking offers detailed information about the motion of molecules in complex environments such as those encountered in live cells, but the interpretation of experimental data is challenging. One of the most powerful tools in the characterization of random processes is the power spectral density. However, because anomalous diffusion processes in complex systems are usually not stationary, the traditional Wiener-Khinchin theorem for the analysis of power spectral densities is invalid. Here, we employ a recently developed tool named aging Wiener-Khinchin theorem to derive the power spectral density of fractional Brownian motion coexisting with a scale-free continuous time random walk, the two most typical anomalous diffusion processes. Using this analysis, we characterize the motion of voltage-gated sodium channels on the surface of hippocampal neurons. Our results show aging where the power spectral density can either increase or decrease with observation time depending on the specific parameters of both underlying processes.

59 BASIC BIOLOGICAL SCIENCES↗

Antiviral and clinical activity of bamlanivimab in a randomized trial of non-hospitalized adults with COVID-19

Abstract Anti-SARS-CoV-2 monoclonal antibodies are mainstay COVID-19 therapeutics. Safety, antiviral, and clinical efficacy of bamlanivimab were evaluated in the randomized controlled trial ACTIV-2/A5401. Non-hospitalized adults were randomized 1:1 within 10 days of COVID-19 symptoms to bamlanivimab or blinded-placebo in two dose-cohorts (7000 mg, n = 94; 700 mg, n = 223). No differences in bamlanivimab vs placebo were observed in the primary outcomes: proportion with undetectable nasopharyngeal SARS-CoV-2 RNA at days 3, 7, 14, 21, and 28 (risk ratio = 0.82–1.05 for 7000 mg [ p (overall) = 0.88] and 0.81–1.21 for 700 mg [ p (overall) = 0.49]), time to symptom improvement (median 21 vs 18.5 days [ p = 0.97], 7000 mg; 24 vs 20.5 days [ p = 0.08], 700 mg), or grade 3+ adverse events. However, bamlanivimab was associated with lower day 3 nasopharyngeal viral levels and faster reductions in inflammatory markers and viral decay by modeling. This study provides evidence of faster reductions in nasopharyngeal SARS-CoV-2 RNA levels but not shorter symptom durations in non-hospitalized adults with early variants of SARS-CoV-2. Trial Registration: ClinicalTrials.gov Identifier: NCT04518410.

60 APPLIED LIFE SCIENCES↗

Random electric field instabilities of relaxor ferroelectrics

Relaxor ferroelectrics are complex oxide materials which are rather unique to study the effects of compositional disorder on phase transitions. Here, we study the effects of quenched cubic random electric fields on the lattice instabilities that lead to a ferroelectric transition and show that, within a microscopic model and a statistical mechanical solution, even weak compositional disorder can prohibit the development of long-range order and that a random field state with anisotropic and power-law correlations of polarization emerges from the combined effect of their characteristic dipole forces and their inherent charge disorder. As a result, we compare and reproduce several key experimental observations in the well-studied relaxor PbMg 1/3 Nb 2/3 O 3 –PbTiO 3 .

36 MATERIALS SCIENCE↗

Resolution of 100 photons and quantum generation of unbiased random numbers

Macroscopic quantum phenomena, such as observed in superfluids and superconductors, have led to promising technological advancements and some of the most important tests of fundamental physics. At present, quantum detection of light is mostly relegated to the microscale, where avalanche photodiodes are very sensitive to distinguishing single-photon events from vacuum but cannot differentiate between larger photon-number events. Beyond this, the ability to perform measurements to resolve photon numbers is highly desirable for a variety of quantum information applications including computation, sensing, and cryptography. True photon-number resolving detectors do exist, but they are currently limited to the ability to resolve on the order of 10 photons, which is too small for certain proposals. In this work, we extend photon measurement into the mesoscopic regime by implementing a detection scheme based on multiplexing highly quantum-efficient transition-edge sensors to accurately resolve photon numbers between zero and 100. Further, we then demonstrate the use of our system by implementing a quantum random number generator with no inherent bias. This method is based on sampling a coherent state in the photon-number basis and is robust against environmental noise, phase and amplitude fluctuations in the laser, loss and detector inefficiency as well as eavesdropping. Beyond true random number generation, our detection scheme serves as a means to implement quantum measurement and engineering techniques valuable for photonic quantum information processing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increasing the hardness of posiform planting using random QUBOs for programmable quantum annealer benchmarking

Posiform planting is a method for constructing QUBO instances with a unique planted solution that can be tailored to arbitrary connectivity graphs. In this study we investigate making posiform planted QUBOs computationally harder by fusing many smaller random Ising models, whose global minimum is computed classically, with posiform planted QUBOs. The unique ground state of the resulting QUBO is the concatenation of (exactly one of) the ground states of each smaller problem. Our method generates QUBO instances that have a unique solution, are native to the hardware graph, and have tunable computational hardness. We use our QUBOs to benchmark three D-Wave quantum annealing processors (with 563–5627 qubits), and compare them against simulated annealing and Gurobi. Surprisingly, we find that the D-Wave ground state sampling success rate is not dependent on the glued random QUBO size, and that some QUBO classes are solved at high success rates at short annealing times on the Zephyr processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-similar random process and chaotic behavior in serrated flow of high entropy alloys

Here, the statistical and dynamic analyses of the serrated-flow behavior in the nanoindentation of a high-entropy alloy, Al 0.5 CoCrCuFeNi, at various holding times and temperatures, are performed to reveal the hidden order associated with the seemingly-irregular intermittent flow. Two distinct types of dynamics are identified in the high-entropy alloy, which are based on the chaotic time-series, approximate entropy, fractal dimension, and Hurst exponent. The dynamic plastic behavior at both room temperature and 200 °C exhibits a positive Lyapunov exponent, suggesting that the underlying dynamics is chaotic. The fractal dimension of the indentation depth increases with the increase of temperature, and there is an inflection at the holding time of 10 s at the same temperature. A large fractal dimension suggests the concurrent nucleation of a large number of slip bands. In particular, for the indentation with the holding time of 10 s at room temperature, the slip process evolves as a self-similar random process with a weak negative correlation similar to a random walk.

36 MATERIALS SCIENCE↗