Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reductive Effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

High-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes

Lanthanum hexaboride electrodes in 1700 K cesium diodes may triple power outputs compared with those demonstrated for nuclear thermionic space applications. Still greater relative gains seem possible for emitters below 1700 K. Further improvements in cesium diode performance should result from the lower collector temperatures allowed for earth and low power space duties. Decreased temperatures will lessen thermal transport losses that attend thermionic conversion mechanisms. Such advantages will add to those from collector Carnot and electrode effects. If plasma ignition difficulties impede diode temperature reductions, recycling small fractions of the output power could provide ionization. So high efficiency, low temperature cesium diodes with lanthanum hexaboride electrodes appear feasible.

Morris, J. F.↗

Causes and control of solar electric propulsion interactive effects

Contaminant effects and questions of thrust system operation status are discussed together with the sources of contaminant effects and the areas of contaminant impact. Contaminant reduction techniques are considered, giving attention to magnetic contamination, dc electric contamination, ac electric contamination, conducted EM interference, radio frequency interference, and material transport and deposition. Design goals for the reduction of contaminant levels are examined along with some areas of uncertainty.

Sellen, J. M., Jr.↗

High-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes

Lanthanum-hexaboride electrodes in 1700 K cesium diodes may triple power outputs compared with those demonstrated for nuclear thermionic space applications. Still greater relative gains seem possible for emitters below 1700 K. Further improvements in cesium-diode performance should result from the lower collector temperatures allowed for earth and low-power-space duties. Decreased temperatures will lessen thermal-transport losses that attend thermionic-conversion mechanisms. Such advantages will add to those from collector-Carnot and electrode effects. If plasma ignition difficulties impede diode temperature reductions, recycling small fractions of the output power could provide ionization. So high-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes appear feasible.

Morris, J. F.↗

Optimizing subsystem test programs

The goal of reduction of space system costs is pursued in the areas of standardization of subsystem test requirements as well as overall subsystem test program resource requirements. A number of standard components are being developed by NASA. The rationale for the various environmental tests applicable to future missions and launch vehicles is discussed. The need for and approach to developing standard component specifications is presented. In addition, a method for reduction of test expenditures utilizing indexes of mission effect and hardware history as indicators of test requirements is proposed.

Meyer, W. H.↗

Skylab technology electrical power system

The solar array/battery power systems for the Skylab vehicle were designed to operate in a solar inertial pointing mode to provide power continuously to the Skylab. Questions of power management are considered, taking into account difficulties caused by the reduction in power system performance due to the effects of structural failure occurring during the launching process. The performance of the solar array of the Apollo Telescope Mount Power System is discussed along with the Orbital Workshop solar array performance and the Airlock Module power conditioning group performance. A list is presented of a number of items which have been identified during mission monitoring and are recommended for electrical power system concepts, designs, and operation for future spacecraft.

Woosley, A. P.↗

Accretion and the nova outburst

Evolutionary sequences of thermonuclear runaways in the hydrogen-rich envelopes of carbon-oxygen white dwarfs are presented which include the effects of accretion of infalling material, allow the initial envelope to be out of equilibrium, and reproduce the gross features of the nova outburst. The models show that massive infall rates produce strong shocks at the stellar surface, that material passing through the shocks reaches nuclear-ignition temperatures, and that the thermonuclear runaway proceeds with an extended envelope around the star in the most extreme cases. The major effect of accretion is found to be a reduction in the amount of material ejected for a given degree of CNO enhancement as compared with previous nonaccretion models. It is also found that all the heating that causes ejection occurs in the deeper layers and that the light curves produced by the present models are in closer agreement with observed nova light curves that the previous models.

Starrfield, S. G.↗

High intensity solar irradiation testing of UV optics

The Orbiting Solar Observatory-I (OSO-8 in orbit) incorporates two high resolution solar pointing spectrometers operating from 1000 A to 4000 A. Energy from the sun enters a Cassegrainian telescope and is focused on a slit while the solar disk is scanned to one arc-second resolution. The stability of the secondary mirrors reflectance was of concern since they would be exposed to intense focused solar energy up to 27 suns. A test program was initiated to simulate this energy input on sample UV mirrors of the MgF2 and LiF types and to evaluate their performance after irradiation. Tests were conducted to simulate the solar spectrum at high intensities (25 suns) and at a single wavelength near Lyman-alpha, but with twenty times the solar intensity at Lyman-alpha. Post-test measurements after every exposure were made at wavelengths from 1025 A to 1849 A. After 75 simulated 'orbits', reflectance changes due to temperature effects were noted to be less than 10%. Reductions in reflectance under high intensity solar radiation were generally greater than 10%. Polymerization of surface contaminations on the LiF mirrors reduced reflectances at short wavelengths by 40%.

Greyerbiehl, J. M.↗

Screening analysis and selection of emission reduction concepts for intermittent combustion aircraft engines

An analysis was conducted to screen, evaluate, and select three engine exhaust emission reduction concepts from a group of 14 candidate alternatives. A comprehensive literature search was conducted to survey the emission reduction technology state-of-the-art and establish contact with firms working on intermittent combustion engine development and pollution reduction problems. Concept development, advantages, disadvantages, and expected emission reduction responses are stated. A set of cost effectiveness criteria was developed, appraised for relative importance, and traded off against each concept so that its merit could be determined. A decision model was used to aid the evaluators in managing the criteria, making consistent judgements, calculating merit scores, and ranking the concepts. An Improved Fuel Injection System, Improved Cooling Combustion Chamber, and a Variable Timing Ignition System were recommended to NASA for approval and further concept development. An alternate concept, Air Injection, was also recommended.

Rezy, B. J.↗

The rotation of Uranus

The rotation rate of Uranus is investigated by measuring the tilts of reflected Fraunhofer lines observed through a slit spectrograph. The data obtained are corrected for the effect of astronomical seeing, and the data-reduction procedures are outlined in detail. Observations are discussed which indicate that the planet's pole of rotation is parallel to the pole of its satellites' orbits and that Uranus may not rotate as a solid body. A rotational period of 15.57 + or - 0.80 hr is derived for northern midlatitudes on Uranus by adopting a planetary diameter of 51,800 + or - 600 km. Possible sources of small systematic errors are briefly considered.

Brown, R. A.↗

The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

Grosveld, F.↗

Investigation of solar cells fabricated on low-cost silicon sheet materials using 1 MeV electron irradiation

The use of high energy electron irradiation is investigated as a controlled means to study in more detail the junction depletion layer processes of solar cells made on various low-cost silicon sheet materials. Results show that solar cells made on Czochralski grown silicon exhibit enhancement of spectral response in the shorter wavelength region when irradiated with high energy electrons. The base region damage can be reduced by subsequent annealing at 450 C which restores the degraded longer wavelength response, although the shorter wavelength enhancement persists. The second diode component of the cell dark forward bias current is also reduced by electron irradiation, while thermal annealing at 450 C without electron irradiation can also produce these same effects. Electron irradiation produces small changes in the shorter wavelength spectral responses and junction improvements in solar cells made on WEB, EFG, and HEM silicon. It is concluded that these beneficial effects on cell characteristics are due to the reduction of oxygen associated deep level recombination centers in the N(+) diffused layer and in the junction.

Kachare, A. H.↗

Surface recombination velocity measurement for silicon solar cells

For the design and fabrication of silicon solar cells approaching theoretical ultimate conversion efficiencies, surface recombination velocity plays a crucial role. A technique using a scanning electron microscope with pulsed electron beam has been developed for thy measurement of this important parameter for silicon surfaces. It is shown that the surface recombination velocity(s) increases by an order of magnitude when a freshly etched sample is left out for a few hours, presumably due to generation of surface states. A textured front surface field (FSF) cell with a high-low junction near the surface shows the effect of minority carrier reflection and an apparent reduction of s, whereas a tandem junction (TJ) cell with n+-p junction near the surface gives larger s value.

Daud, T.↗

The effect of monomolecular surface films on the microwave brightness temperature of the sea surface

It is pointed out that monomolecular surface films of biological origin are often encountered on the ocean surface, especially in coastal regions. The thicknesses of the monomolecular films are of the order of 3 x 10 to the -9th m. Huehnerfuss et al. (1978, 1981) have shown that monomolecular surface films damp surface waves quite strongly in the centimeter to decimeter wavelength regime. Other effects caused by films are related to the reduction of the gas exchange at the air-sea interface and the decrease of the wind stress. The present investigation is concerned with experiments which reveal an unexpectedly large response of the microwave brightness temperature to a monomolecular oleyl alcohol slick at 1.43 GHz. Brightness temperature is a function of the complex dielectric constant of thy upper layer of the ocean. During six overflights over an ocean area covered with an artificial monomolecular alcohol film, a large decrease of the brightness temperature at the L-band was measured, while at the S-band almost no decrease was observed.

Alpers, W.↗

Relation of MAGSAT and Gravity Anomalies to the Main Tectonic Provinces of South America

Magnetic anomalies of the South American continent are generally more positive and variable than the oceanic anomalies. There is better correlation between the magnetic anomalies and the major tectonic elements of the continents than between the anomalies and the main tectonic elements of the adjacent oceanic areas. Oceanic areas generally show no direct correlation to the magnetic anomalies. Precambrian continental shields are mainly more magnetic than continental basins and orogenic belts. Shields differ markedly from major aulacogens which are generally characterized by negative magnetic anomalies and positive gravity anomalies. The Andean orogenic belt shows rather poor correlation with the magnetic anomalies. The magnetic data exhibit instead prominent east-west trends, which although consistent with some tectonic features, may be related to processing noise derived from data reduction procedures to correct for external magnetic field effects. The pattern over the Andes is sufficiently distinct from the generally north trending magnetic anomalies occurring in the adjacent Pacific Ocean to separate effectively the leading edge of the South American Plate from the Nazea Plate. Eastern South America is characterized by magnetic anomalies which commonly extend across the continental margin into the Atlantic Ocean.

Yuan, D. W.↗

Analysis of buoyancy effect on fully developed laminar heat transfer in a rotating tube

Laminar heat transfer is analyzed in a tube rotating about an axis perpendicular to the tube axis. The solution applies for flow that is either radially outward from the axis of rotation, or radially inward toward the axis of rotation. The conditions are fully developed, and there is uniform heat addition at the tube wall. The analysis is performed by expanding velocities and temperature in power series using the Taylor number as a perturbation parameter. Coriolis and buoyancy forces caused by tube rotation are included, and the solution is calculated through second-order terms. The secondary flow induced by the Coriolis terms always tends to increase the heat transfer coefficient; this effect can dominate for small wall heating. For radial inflow, buoyancy also tends to improve heat transfer. For radial outflow, however, buoyancy tends to reduce heat transfer; for large wall heating this effect can dominate, and there is a net reduction in heat transfer coefficient.

Siegel, R.↗

Over-the-wing propeller

This invention is an aircraft with a system for increasing the lift drag ratio over a broad range of operating conditions. The system positions the engines and nacelles over the wing in such a position that gains in propeller efficiency is achieved simultaneously with increases in wing lift and a reduction in wing drag. Adverse structural and torsional effects on the wings are avoided by fuselage mounted pylons which attach to the upper portion of the fuselage aft of the wings. Similarly, pylon-wing interference is eliminated by moving the pylons to the fuselage. Further gains are achieved by locating the pylon surface area aft of the aircraft center of gravity, thereby augmenting both directional and longitudinal stability. This augmentation has the further effect of reducing the size, weight and drag of empennage components. The combination of design changes results in improved cruise performance and increased climb performance while reducing fuel consumption and drag and weight penalties.

Johnson, Joseph L., Jr.↗

Report on holographic tests at S-band and K-band on the DSS-63 64 metre antenna

High resolution holographic tests were carried out on DSS-63 at S-band and K-band during May l985. These tests followed a mechanical retrofit which involved the addition of structural bracing to the backing structure. Geosynchronous satellite beacons were used as sources for the tests. At a resolution of 0.4m the S-band and K-band tests revealed rms deviations of the surface to be 2.73mm and 1.53mm, respectively. The difference between these two results is thought to be due mainly to contamination of the S-band surface error map by expected and generally predictable subreflector diffraction effects. The S-band map is also known to be contaminated by diffraction from the subreflector support struts and has a higher noise level than the K-band map. A list of corrections to be applied to the reflector panels is derived from the K-band map. These corrections are predicted to reduce the rms deviation from 1.53mm to 0.86mm at 0.4m resolution. Comparison with results obtained before the mechanical retrofit suggests the major effect of the added structural bracing to be reduction of a third order deformation of the reflector about its axis.

Godwin, M. P.↗