Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reservoir Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Using onset times from frequent geophysical surveys to understand reservoir fluid flow and to estimate flow properties

Seismic characterization of flow properties is a difficult prospect, due to the indirect relationship between permeability and seismic velocity and attenuation. At best, seismic time-lapse changes can detect the effects of saturation and pressure changes in a reservoir due to fluid flow. Even in this case, the interpretation of the seismic observation in terms of the state of the reservoir depends intimately on the properties of the rock physics model, which are usually poorly known. The onset time, the calendar time of geophysical changes, provides an alternative datum for characterizing properties such as reservoir permeability. The main advantage of an onset time is that it is sensitive to the flow properties of the reservoir yet insensitive to the details of the rock physics model. Two examples of the utility of onset times are discussed: The use of travel time shifts induced by the injection of carbon dioxide between two wells, and the time-lapse time shifts for elastic waves propagating through a reservoir undergoing enhanced oil recovery. In both examples, the onset times are mapped into permeability estimates using a trajectory-based approach akin to seismic tomography.

58 GEOSCIENCES↗

Multigrid Methods for Fully Implicit Oil Reservoir Simulation

In this paper we consider the simultaneous flow of oil and water in reservoir rock. This displacement process is modeled by two basic equations: the material balance or continuity equations and the equation of motion (Darcy's law). For the numerical solution of this system of nonlinear partial differential equations there are two approaches: the fully implicit or simultaneous solution method and the sequential solution method. In the sequential solution method the system of partial differential equations is manipulated to give an elliptic pressure equation and a hyperbolic (or parabolic) saturation equation. In the IMPES approach the pressure equation is first solved, using values for the saturation from the previous time level. Next the saturations are updated by some explicit time stepping method; this implies that the method is only conditionally stable. For the numerical solution of the linear, elliptic pressure equation multigrid methods have become an accepted technique. On the other hand, the fully implicit method is unconditionally stable, but it has the disadvantage that in every time step a large system of nonlinear algebraic equations has to be solved. The most time-consuming part of any fully implicit reservoir simulator is the solution of this large system of equations. Usually this is done by Newton's method. The resulting systems of linear equations are then either solved by a direct method or by some conjugate gradient type method. In this paper we consider the possibility of applying multigrid methods for the iterative solution of the systems of nonlinear equations. There are two ways of using multigrid for this job: either we use a nonlinear multigrid method or we use a linear multigrid method to deal with the linear systems that arise in Newton's method. So far only a few authors have reported on the use of multigrid methods for fully implicit simulations. Two-level FAS algorithm is presented for the black-oil equations, and linear multigrid for two-phase flow problems with strong heterogeneities and anisotropies is studied. Here we consider both possibilities. Moreover we present a novel way for constructing the coarse grid correction operator in linear multigrid algorithms. This approach has the advantage in that it preserves the sparsity pattern of the fine grid matrix and it can be extended to systems of equations in a straightforward manner. We compare the linear and nonlinear multigrid algorithms by means of a numerical experiment.

Molenaar, J.↗

Simplified predictive models for CO 2 sequestration performance assessment

CO2 sequestration in deep saline formations is increasingly being considered as a viable strategy for the mitigation of greenhouse gas emissions from anthropogenic sources. In this context, detailed numerical simulation based models are routinely used to understand key processes and parameters affecting pressure propagation and buoyant plume migration following CO2 injection into the subsurface. As these models are data and computation intensive, the development of computationally-efficient alternatives to conventional numerical simulators has become an active area of research. Such simplified models can be valuable assets during preliminary CO2 injection project screening, serve as a key element of probabilistic system assessment modeling tools, and assist regulators in quickly evaluating geological storage projects. We present three strategies for the development and validation of simplified modeling approaches for CO2 sequestration in deep saline formations: (1) simplified physics-based modeling, (2) statisticallearning based modeling, and (3) reduced-order method based modeling. In the first category, a set of full-physics compositional simulations is used to develop correlations for dimensionless injectivity as a function of the slope of the CO2 fractional-flow curve, variance of layer permeability values, and the nature of vertical permeability arrangement. The same variables, along with a modified gravity number, can be used to develop a correlation for the total storage efficiency within the CO2 plume footprint. Furthermore, the dimensionless average pressure buildup after the onset of boundary effects can be correlated to dimensionless time, CO2 plume footprint, and storativity contrast between the reservoir and caprock. In the second category, statistical “proxy models” are developed using the simulation domain described previously with two approaches: (a) classical Box-Behnken experimental design with a quadratic response surface, and (b) maximin Latin Hypercube sampling (LHS) based design with a multidimensional kriging metamodel fit. For roughly the same number of simulations, the LHS-based metamodel yields a more robust predictive model, as verified by a k-fold cross-validation approach (with data split into training and test sets) as well by validation with an independent dataset. In the third category, a reduced-order modeling procedure is utilized that combines proper orthogonal decomposition (POD) for reducing problem dimensionality with trajectory-piecewise linearization (TPWL) in order to represent system response at new control settings from a limited number of training runs. Significant savings in computational time are observed with reasonable accuracy from the PODTPWL reduced-order model for both vertical and horizontal well problems – which could be important in the context of history matching, uncertainty quantification and optimization problems. The simplified physics and statistical learning based models are also validated using an uncertainty analysis framework. Reference cumulative distribution functions of key model outcomes (i.e., plume radius and reservoir pressure buildup) generated using a 97-run full-physics simulation are successfully validated against the CDF from 10,000 sample probabilistic simulations using the simplified models. The main contribution of this research project is the development and validation of a portfolio of simplified modeling approaches that will enable rapid feasibility and risk assessment for CO2 sequestration in deep saline formations.

54 ENVIRONMENTAL SCIENCES↗

ELM‐MOSART‐DOC: A Large‐Scale Riverine Dissolved Organic Carbon Model and Its Application Over the United States

Riverine dissolved organic carbon (DOC), primarily sourced from soil organic carbon (SOC), plays a crucial role in regional and global carbon cycles. However, the complexities of the underlying mechanisms and limited observations present significant challenges for predictive understanding of DOC at regional or larger scales. Recently, we developed a machine learning‐based (ML) map of DOC transformation rates, bridging the gap between SOC and DOC leaching flux and simplifying terrestrial DOC representation. Building on this advancement, we introduce ELM‐MOSART‐DOC, a DOC module integrated into the riverine component of the Energy Exascale Earth System Model (E3SM)—the Model for Scale Adaptive River Transport (MOSART). ELM‐MOSART‐DOC simulates DOC transport and transformation across both headwater streams and river networks, including those managed. Model validation demonstrates the ability of ELM‐MOSART‐DOC to accurately capture long‐term average DOC concentrations, with Kling‐Gupta Efficiency (KGE) scores of 0.58 and 0.76 at large and local stations, respectively. We further assess the impact of reservoirs through different simulation schemes, revealing that reservoirs significantly alter DOC fluxes by regulating streamflow patterns and promoting DOC mineralization. Model simulations indicate that reservoirs reduce total DOC flux from the Mississippi River into the ocean by 7.5%, with the long‐term average annual export decreasing from 3.34 to 3.14 teragrams (Tg) per year. ELM‐MOSART‐DOC integrates process‐based modeling with ML parameterization to enhance the predictive understanding of riverine biogeochemical processes. This approach reduces uncertainties in modeling regional and global carbon cycle ESMs and provides new insights into carbon cycling and its implications for global environmental change.

Li, Lingbo [Univ. of Houston, TX (United States); ↗

Stress- and Chemistry-Mediated Permeability Enhancement/Degradation in Stimulated Critically-Stressed Fractures

This work has investigated the interactions between stress and chemistry in controlling the evolution of permeability in stimulated fractured reservoirs through an integrated program of experimentation and modeling. Flow-through experiments on natural and artificial fractures in Coso diorite have examined the evolution of permeability under paths of mean and deviatoric stresses, including the role of dissolution and precipitation. Models accommodating these behaviors have examined the importance of incorporating the complex couplings between stress and chemistry in examining the evolution of permeability in EGS reservoirs. This document reports the findings of experiment [1,2] and analysis [3,4], in four sequential chapters.

15 GEOTHERMAL ENERGY↗

Potential for monitoring soil erosion features and soil erosion modeling components from remotely sensed data

Accurate estimates of soil erosion and its effects on soil productivity are essential in agricultural decision making and planning from the field scale to the national level. Erosion models have been primarily developed for designing erosion control systems, predicting sediment yield for reservoir design, predicting sediment transport, and simulating water quality. New models proposed are more comprehensive in that the necessary components (hydrology, erosion-sedimentation, nutrient cycling, tillage, etc.) are linked in a model appropriate for studying the erosion-productivity problem. Recent developments in remote sensing systems, such as Landsat Thematic Mapper, Shuttle Imaging Radar (SIR-B), etc., can contribute significantly to the future development and operational use of these models.

Langran, K. J.↗

A probabilistic assessment of geomechanical reservoir integrity during CO 2 sequestration in flood basalt formations

Recent field experiments in Iceland and Washington State (USA) show that basalt formations may be favorable targets for carbon capture and sequestration (CCS) because CO 2 mineralization reactions proceed rapidly. These results imply that there is tremendous opportunity for implementing CCS in large igneous provinces. However, the magnitude of this opportunity comprises commensurate levels of uncertainty because basalt reservoirs are characterized by highly heterogeneous, fracture-controlled hydraulic properties. This geologic uncertainty is propagated as parametric uncertainty in quantitative risk models, thus limiting the efficacy of models to predict CCS performance attributes, such as reservoir integrity and storage potential. To overcome these limitations, here we present a stochastic approach for quantifying the geomechanical performance attributes of CCS operations in a highly heterogeneous basalt reservoir. We utilize geostatistical reservoir characterization to develop an ensemble of equally probable permeability distributions in a flood basalt reservoir with characteristics of the Wallula Basalt Pilot Project. We then simulate industrial-scale CO 2 injections within the ensemble and calculate the mean and variance of fluid pressure over a 1-year injection period. These calculations are combined with the state of stress in southeast Washington State to constrain the spatial extent at which shear failure, fracture initiation, and borehole breakdown may occur. Results from this study show that (i) permeability uncertainty alone causes injection pressure to vary over 25 MPa, (ii) shear failure is likely to occur at 7 times greater distances from the injection than the CO 2 migrates, and (iii) joint initiation pressures are localized within the volume comprising the CO 2 plume.

03 NATURAL GAS↗

3D Play Fairway Analysis for Examining of Superhot Drilling Production Scenarios: Preprint

The DEEPEN (DE-risking Exploration for geothermal Plays in magmatic ENvironments) project was a multi-laboratory, international effort to reduce uncertainty and improve resource characterization in superhot geothermal systems. Building on this foundation, this work advances open-source tools designed to lower the exploration risk and cost of superhot geothermal projects while promoting transparency, reproducibility, and efficiency in exploration workflows. These tools are being tested at two key sites: (1) the Nesjavellir Geothermal Area in Iceland, where the Icelandic Deep Drilling Project (IDDP) will drill its third well, and (2) Newberry Volcano in Oregon, USA, where Mazama Energy will pilot the first superhot enhanced geothermal system (EGS). A major outcome is the creation of a modular, open-source Python framework for play fairway analysis (PFA) in 2D and 3D, called geoPFA. The PFA workflow has been expanded to produce pseudo conceptual models, and will soon be refined to assess reservoir components through integration with the thermo-hydraulic-mechanical-chemical (THMC) simulator TReactMech, to enable iterative coupling between PFA and THMC models, improving characterization of superhot systems. All three of the Icelandic Deep Drilling Project's production scenarios were analyzed via this framework: (1) a superhot deep injection well paired with conventional production wells at Nesjavellir, (2) a superhot deep production well at Nesjavellir, and (3) superhot enhanced geothermal system at Newberry Volcano. This analysis provides useful insights around conceptual modeling of these production scenarios, helping to inform decisions around which scenario is best suited for which types of environments.

15 GEOTHERMAL ENERGY↗

A learning-based data-driven forecast approach for predicting future reservoir performance

Quantification of the predictive uncertainty of subsurface models has long been investigated. The traditional workflow is to calibrate prior models to match observed data, and then use the posterior models to simulate future system performance. Not only are these procedures computationally expensive, but they also have issues in maintaining geological model constraints during the calibration step. Data space inversion (DSI) was introduced recently to predict future system performance without the iterative history matching or model calibration step. In general, DSI approaches seek to establish a statistical relationship between the observed and forecast variables, as well as to quantify the predictive uncertainty of the forecast variables, by using an ensemble of uncalibrated prior models. Existing DSI approaches all require a number of complex transformation and mapping operations, which may deter their widespread use. Here in this study, we introduce a new and simpler DSI approach, the learning-based, data-driven forecast approach (LDFA), by combining dimension reduction and machine learning techniques to quickly provide accurate forecast results and reliably quantify corresponding uncertainty in the results. Our LDFA framework is demonstrated using two supervised learning algorithms, artificial neural network (ANN) and support vector regression (SVR), on two representative examples from reservoir engineering and geological carbon storage. Results suggest that our approach provides accurate forecast results (e.g., future oil production rate or cumulative injected CO 2 ) and reasonable predictive uncertainty intervals. Our framework is generic and may be applied to other surface and subsurface problems.

42 ENGINEERING↗

Geological storage of CO2 in sub-seafloor basalt: the CarbonSAFE pre-feasibility study offshore Washington State and British Columbia

The CarbonSAFE Cascadia project is conducting a pre-feasibility study to evaluate technical and nontechnical aspects of collecting and storing 50 MMT of CO2 in a safe, ocean basalt reservoir offshore from Washington State and British Columbia. Sub-seafloor basalts are very common on Earth and enable CO2 mineralization as a long-term storage mechanism, permanently sequestering the carbon in solid rock form. Our project goals include evaluation of this reservoir as an industrial-scale CO2 storage complex, developing potential source/transport scenarios, and conducting laboratory and modeling studies to evaluate the potential capacity of the reservoir, and completing an evaluation of economic, regulatory and project management risks. Potential scenarios include sources and transport options in USA and in Canada. The overall project network consists of a coordination team of researchers from collaborating academic institutions, subcontractors, and external participants. Lessons learned from this study at the Cascadia Basin location may be transferrable elsewhere around the globe.

basalt, carbon storage, Offshore CO2 Injection↗

Bell Creek Test Site: 3-D Seismic and Characterization Report

The Plains CO 2 Reduction (PCOR) Partnership, led by the Energy & Environmental Research Center (EERC), is working with Denbury Onshore (Denbury) to evaluate the effectiveness of large-scale injection of carbon dioxide (CO 2 ) into the Bell Creek oil field for CO 2 enhanced oil recovery (EOR) and to study long-term incidental CO 2 storage. A technical team that includes Denbury, the EERC, and others are conducting activities to determine the baseline reservoir characteristics for development of a geologic model for predictive simulations and to serve as a comparison to time-lapse data as they are acquired. One of the activities was the acquisition and interpretation of a baseline three-dimensional (3-D) surface seismic survey acquired over a major portion of the field which is the subject of this report. The interpretation will be used to advance the field characterization effort. The geophysical data will be integrated with the EERC’s geologic model to improve its accuracy. In the future, when paired with at least one subsequent 3-D surface seismic survey, the data difference will provide a direct indication of where the CO 2 has migrated within the reservoir and aid in monitoring, verification, and accounting goals.

02 PETROLEUM↗

Surface Roughness Effects on Fluid Transport Through a Natural Rock Fracture

Fluid flow through rock fractures can be orders of magnitude faster than through the adjacent low-permeability rock. Understanding how fluid moves through these pathways is important for the prediction of sequestered CO2 transport in geologic reservoirs. Reservoir-scale, discrete-fracture simulators use simplified models of flow through fractures to determine transport properties in complex fracture networks. A high level of approximation is required in these reservoir-scale simulations due to the number of fractures within the domain of interest and because of the limited amount of information that can be obtained from geophysical well-logs (Long et al. (1996)). For this study, flow simulations through a CT-scanned fracture were performed to evaluate different fluid transport parameters that are important in geological flow analysis. The ‘roughness’ of the fracture was varied to determine the effect of the bumpy fracture walls on the fluid flow. The permeability and effective aperture were determined for flow under a constant pressure head. The fracture roughness is shown to dramatically reduce the flow through the fracture, and various relations are described.

54 ENVIRONMENTAL SCIENCES↗

Probabilistic geomechanical analysis of compartmentalization at the Snøhvit CO 2 sequestration project

Abstract Pressure buildup caused by large‐scale CO 2 injection is a key concern during a carbon sequestration project. Large overpressures can compromise seal integrity, reactivate faults, and induce seismicity. Furthermore, pressure buildup is directly related with storage capacity. In this work we study the geomechanical response to CO 2 injection at Snøhvit, to understand the potential for fault reactivation, leakage, and contamination of the producing interval through bounding faults. Furthermore, we evaluate the potential contribution of a structural component to reservoir compartmentalization. We combine simplified analytical models, based on critically stressed fracture theory and a Mohr‐Coulomb failure criterion, with a rigorous sensitivity analysis. Large stress uncertainties are present and reflected in the modeling results. It was found that under the most likely stress state the faults are fairly stable and caprock hydrofracturing would be expected before fault reactivation. In most of the analyzed cases, the critical pressure perturbation needed for reactivation is above 13 MPa, which was the limiting pressure increase before reaching the fracture pressure. Faults were found to be ~ 20% less stable when considering variations in S Hmax orientation. In those cases, fault reactivation could be expected before caprock failure if injection continued. However, if the pressure increase did reach the critical values for seal failure estimated under the worst case (and least likely) stress state, no indication of such failure can be observed in the measured pressure response. Finally, the potential role of a structural component in the compartmentalization and fluid migration is difficult to assess due to the stress state uncertainty.

Chiaramonte, Laura↗

Spatiotemporal changes of seismic attenuation caused by injected CO 2 at the Frio-II pilot site, Dayton, TX, USA

A continuous active source seismic monitoring data set was collected with crosswell geometry during CO 2 injection at the Frio-II brine pilot, near Liberty, TX. Previous studies have shown that spatiotemporal changes in the P wave first arrival time reveal the movement of the injected CO 2 plume in the storage zone. To further constrain the CO 2 saturation, particularly at higher saturation levels, we investigate spatial-temporal changes in the seismic attenuation of the first arrivals. The attenuation changes over the injection period are estimated by the amount of the centroid frequency shift computed by local time-frequency analysis. We observe that (1) at receivers above the injection zone seismic attenuation does not change in a physical trend; (2) at receivers in the injection zone attenuation sharply increases following injection and peaks at specific points varying with distributed receivers, which is consistent with observations from time delays of first arrivals; then, (3) attenuation decreases over the injection time. The attenuation change exhibits a bell-shaped pattern during CO 2 injection. Under Frio-II field reservoir conditions, White's patchy saturation model can quantitatively explain both the P wave velocity and attenuation response observed. We have combined the velocity and attenuation change data in a crossplot format that is useful for model-data comparison and determining patch size. Our analysis suggests that spatial-temporal attenuation change is not only an indicator of the movement and saturation of CO 2 plumes, even at large saturations, but also can quantitatively constrain CO 2 plume saturation when used jointly with seismic velocity.

58 GEOSCIENCES↗

Carbon capture, utilization, and storage hub development on the Gulf Coast

Abstract The Gulf Coast of the United States hosts diverse power generation, refining, and petrochemical processing facilities, resulting in the nation's largest volumetric concentration of industrial CO 2 emissions, rivaled only by the Ohio River Valley. These emissions sources are concentrated in specific industrial clusters that allow combining emissions streams to achieve economies of scale. The region is currently undergoing globally significant industrial expansion and investment as a result of abundant and inexpensive regional unconventional natural gas availability, and is a growing exporter of liquefied natural gas (LNG). Opportunities to integrate CO 2 emission management within the diverse energy chains in the region are volumetrically significant and include both concentrated and dilute sources. Significant examples of capture, transport, and storage exist. Offshore storage is particularly attractive, as it provides simplified land leasing models (single governmental land owner), proven reservoir quality, and presents fewer risks to both protected groundwater and populated areas. Projects can now take advantage of recently expanded opportunities under section 45Q of the Internal Revenue Service tax code. The region continues to evolve as an active carbon‐handling hub, and is uniquely suited to justify additional investment in carbon capture, utilization, and storage (CCUS) technologies via a large‐scale integrated project development. Continued development of integrated projects will allow the region to continue to grow economically within its strong fossil‐fuel handling competence focus while advancing low‐carbon energy technologies that maintain globally competitiveness. © 2021 The Authors. Greenhouse Gases: Science and Technology published by Society of Chemical Industry and John Wiley & Sons Ltd.

45Q↗

The evolution of the Cappadocia Geothermal Province, Anatolia (Turkey): geochemical and geochronological evidence

Cappadocia Geothermal Province (CGP), central Turkey, consists of nine individual geothermal regions controlled by active regional fault systems. This paper examines the age dating of alteration minerals and the geochemistry (trace elements and isotopes) of the alteration minerals and geothermal waters, to assess the evolution of CGP in relation to regional tectonics. Ar–Ar age data of jarosite and alunite show that the host rocks were exposed to oxidizing conditions near the Earth’s surface at about 5.30 Ma. Based on the δ{sup 18}O–δD relationhip, water samples had a high altitude meteoric origin. The δ{sup 34}S values of jarosite and alunite indicate that water samples from the southern part of the study area reached the surface after circulation through volcanic rocks, while northern samples had traveled to the surface after interacting with evaporates at greater depths. REY (rare earth elements and yttrium) diagrams of alteration minerals (especially illite, jarosite and alunite) from rock samples, taken from the same locations as the water samples, display a similar REY pattern to water samples. This suggests that thermal fluids, which reached the surface along a fault zone and caused the mineral alteration in the past, had similar chemical composition to the current geothermal water. The geothermal conceptual model, which defines a volcanically heated reservoir and cap rocks, suggests there are no structural drawbacks to the use of the CGP geothermal system as a resource. However, fluid is insufficient to drive the geothermal system as a result of scanty supply of meteoric water due to evaporation significantly exceeding rainfall.

58 GEOSCIENCES↗

An exploration of pressure dynamics using differential equations defined on a fractal geometry

Pressure tests have been used to understand the behavior of naturally fractured reservoirs (NFRs) by establishing parameters such as permeability, connectivity of fractures, system compressibility, fracture network parameters, and others associated with the physical properties of the reservoir. The complex fracture network of a NFR produces anomalous fluid flow, which is shown by the pressure behavior at the well. A plausible model to explain this behavior is to assume that it arises from a fractal fracture system. However, to estimate the parameters that define this fractal fracture system, fluid flow models based on the modification of Darcy’s law are used. On the other hand, in this work, a fractal structure with known fractal dimension: Sierpinski gasket (SG) is proposed. The objective of this work is to solve numerically the diffusion equation on SG, and establish a comparison with flow models used in the oil industry to investigate the fractality assumption. This study is focused on the qualitative behavior of the solution of the diffusion equation defined on a SG supported by the Kigami’s theory of differential equations on fractals.

42 ENGINEERING↗