Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOURCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Cross Correlation of the 2-10 keV X-Ray Background with Radio Sources: Constraining the Large Scale Structure of the X-Ray Background

We present cross-correlation analyses of the HEAO 2-10 keV diffuse X-ray map with both the combined GB6/Parkes-MIT-NRAO (GB6-PMN) 5 GHz and the FIRST 1.4 GHz radio surveys. The cross-correlation functions (CCFs) of both radio surveys with the unresolved X-ray background were detected at the 5 u level. While the large angular resolution (3 deg) of the X-ray map makes it difficult to separate the contributions of clustering from those of Poisson fluctuations, the amplitude of the CCF provides important constraints on the X-ray emissivity of the radio sources, as well as on the clustering properties of radio and X-ray sources. These constraints are subject to a number of modeling parameters, e.g., X-ray luminosity evolution, clustering evolution, the radio luminosity function, cosmological model, etc. For reasonable choices of parameters the X-ray/FIRST CCF is consistent with a correlation scale length of 6/h Mpc. This is somewhat smaller than the scale length inferred from the autocorrelation function of the FIRST survey and implies that X-ray sources are less strongly clustered than strong radio sources, a result that is consistent with previous constraints on X-ray clustering. The X-ray/GB6-PMN CCF is several times larger and is likely to be dominated by Poisson fluctuations. This implies that approx. 2% of the diffuse X-ray background arises from the GB6-PMN sources.

Boughn, Stephen P.↗

Ionization Nebulae Surrounding CAL 83 and Other Supersoft X-ray Sources

We present the results of an optical search for ionized gaseous nebulae surrounding luminous, "supersoft" X-ray sources in the Large and Small Magellanic Clouds. This relatively new and mysterious X-ray class has characteristic luminosities approximately 10(exp 37) - 10(exp 38) ergs/s with effective temperatures in the range of 2 - 6 x 10(exp 5) K. The presence of a large flux of UV and soft X-ray photons from these objects has led to predictions of bright optical emission lines from the local interstellar medium. One such object, CAL 83 in the LMC, was known to have an associated nebula, and we quantify here the asymmetry and luminosity of this remarkable nebula. Deep images were made using narrowband filters to isolate the emission lines of H.alpha and [O III] (lamda5007). In these emission lines, the nebula is detected out to distances as far as 25 pc from the central object, and the integrated luminosity in each line is of order approximately 100 solar luminosity. Model calculations of such nebulae for chemical abundances characteristic of the LMC indicate that approximately 1% of the X-ray luminosity of the central source is reprocessed into the nebular H.alpha and [O III] lamda5007 emission lines, from which we conclude that the time-averaged X-ray luminosity of the central source, CAL 83, is greater than 3 x 10(exp 37) ergs/s. The bright inner nebula contains approximately 150 solar mass within 7.5 pc of CAL 83, which clearly indicates that the nebular material has its origin in the interstellar medium. In sharp contrast, there were null detections for nebulae associated with nine other luminous, supersoft X-ray sources in the LMC and SMC, with upper limits for the [O III] luminosity that are a factor of approximately 10 below that for CAL 83. For eight of these latter sources, we conclude that either their time-averaged luminosity is substantially below that of CAL 83, or that the local interstellar medium is much less dense. The latter effect may be enhanced by expansion of the ionized nebula during the last several million years.

Remillard, R. A.↗

Locating and Determining the Nature of a Persistent Hard X-Ray Source GROJ1814-12

The nature of the persistent hard X-ray source GROJ1814-12 discovered by BATSE a year ago is puzzling. Several potential X-ray sources are in the approximately 25 ft radius error box. Our XTE scanning observation attempted to determine the exact position of the hard X-ray source with respect with other sources. No obvious candidate is emerging from the analysis. A report is being prepared by the observing group. The persistent hard X-ray source GROJ1814-12 might be an example of a low-mass X-ray binary producing a strong flux of hard X-rays, and therefore be of the greatest importance for the theory of neutron star emission.

Tavani, Marco↗

Preview of the BATSE Earth Occultation Catalog of Low Energy Gamma Ray Sources

The Burst and Transient Source Experiment (BATSE) aboard the Compton Gamma Ray Observatory (CGRO) has been detecting and monitoring point sources in the high energy sky since 1991. Although BATSE is best known for gamma ray bursts, it also monitors the sky for longer-lived sources of radiation. Using the Earth occultation technique to extract flux information, a catalog is being prepared of about 150 sources potential emission in the large area detectors (20-1000 keV). The catalog will contain light curves, representative spectra, and parametric data for black hole and neutron star binaries, active galaxies, and super-nova remnants. In this preview, we present light curves for persistent and transient sources, and also show examples of what type of information can be obtained from the BATSE Earth occultation database. Options for making the data easily accessible as an "on line" WWW document are being explored.

Harmon, B. A.↗

Are Unidentified Extreme-Ultraviolet Sources the Closest Neutron Stars?

Unidentified extreme-ultraviolet (EUV) sources, detected in the EUVE and ROSAT WFC all-sky surveys, could be isolated old neutron stars, accreting material from the interstellar medium (ISM). The closest neutron stars, which are located in the local ISM bubble of unusually low density, are faint and cool (L approximately 10(exp 27) erg/s, T approximately < 6 eV). The extreme-UV spectrum of these sources is very sensitive to the H I column density, since a large fraction of the energy is emitted just below the hydrogen Lyman edge. The EUVE sources with large count rates in the long-wavelength bandpass (600 A) seem to be the most promising candidates. These sources should have low H I column density (N(sub H I) approximately < 10(exp 18) sq cm), constraining their distances to a few tens of parsecs. Otherwise, their spectra would be significantly modified by ISM absorption, and inevitably they would appear stronger in the short-wavelength (100 A, 200 A) EUVE bandpasses. If these unidentified objects are familiar EUV sources rather than neutron stars, i.e. white dwarfs, late-type stars or cataclysmic variables, they are expected to be identifiable, and generally brighter than V approximately 14.

Shemi, A.↗

The Ionization Source in the Nucleus of M84

We have obtained new Hubble Space Telescope (HST) observations of M84, a nearby massive elliptical galaxy whose nucleus contains a approximately 1.5 X 10(exp 9) solar mass dark compact object, which presumably is a supermassive black hole. Our Space Telescope Imaging Spectrograph (STIS) spectrum provides the first clear detection of emission lines in the blue (e.g., [0 II] lambda 3727, HBeta and [0 III] lambda lambda4959,5007), which arise from a compact region approximately 0".28 across centered on the nucleus. Our Near Infrared Camera and MultiObject Spectrometer (NICMOS) images exhibit the best view through the prominent dust lanes evident at optical wavelengths and provide a more accurate correction for the internal extinction. The relative fluxes of the emission lines we have detected in the blue together with those detected in the wavelength range 6295 - 6867 A by Bower et al. indicate that the gas at the nucleus is photoionized by a nonstellar process, instead of hot stars. Stellar absorption features from cool stars at the nucleus are very weak. We update the spectral energy distribution of the nuclear point source and find that although it is roughly flat in most bands, the optical to UV continuum is very red, similar to the spectral energy distribution of BL Lac. Thus, the nuclear point source seen in high-resolution optical images is not a star cluster but is instead a nonstellar source. Assuming isotropic emission from this source, we estimate that the ratio of bolometric luminosity to Eddington luminosity is about 5 x 10(exp -7). However, this could be underestimated if this source is a misaligned BL Lac object, which is a possibility suggested by the spectral energy distribution and the evidence of optical variability we describe.

Bower, G. A.↗

X-Ray Companion Sources to Seyfert 2 Galaxies

The ROSAT observations supported by this grant provided improved positions for the "companion sources" to 3 Seyfert 2 galaxies, as proposed. Follow-up observations at the MMT and CTIO found that the optical counterparts to these sources were a mixture of normal stars (mainly M dwarfs) and background AGN. This surprising result suggests that the reported excess of PSPC sources around Seyfert 2 galaxies was a statistical fluctuation, and does not indicate a new population of bright non-nuclear X-ray sources in these objects. The report of Xia et al., that a companion to MRK273 was a dwarf galaxy at the same redshift containing another Seyfert 2 galaxy was withdrawn in an erratum. (The true redshift of the companion was much larger than that of MRK273.) For the time being then this question is closed. A re-examination of the "companions" using Chandra data will become possible in the next year. If the optical 'counterparts' we found are not the true counterparts, or if the counterparts we found were the background of inevitable interlopers ('serendipitous') sources, there may remain a high X-ray luminosity population associated with Seyfert 2 galaxies.

Elvis, Martin↗

Meteorological Characterization of Global Dust Sources

The global distribution of absorbing aerosols index (AI) derived from Nimbus 7 Total Ozone Mapping Spectrometer (TOMS) measurements has been used to identify the major sources of atmospheric dust particles [Prospero, et al., 2000]. In this presentation, we will show that the TOMS aerosol index can also be used to the meteorological characterization of the source areas. We found a huge "dust belt" with a strong correlation between the TOMS index and the sea-level pressure wrapping all the major dust sources. To handle the difficulty of using quantitatively the TOMS Al and its strong dependency on the aerosol layer altitude, the Al has been correlated to the planetary boundary layer depth (PBL) and the surface wind speed. The strongest correlation is obtained with the product of these two variables and at the precise location of the dust sources identified by Prospero et al. The relation between the TOMS Al and the product of the PBL height and the surface wind speed has been used to study the interannual variability of the North-Africa dust sources in relation with the North Atlantic Oscillation (NAO). Finally, we will show that even on a short time base the variability of the TOMS Al can be related to the surface wind speed and PBL height.

Ginoux, Paul↗

Current Background Noise Sources and Levels in the NASA Ames 40- by 80-Foot Wind Tunnel: A Status Report

Background noise measurements were made of the acoustic environment in the National Full-Scale Aerodynamics Complex 40- by 80-Foot Wind Tunnel (40x80) at NASA Ames Research Center. The measurements were acquired subsequent to the 40x80 Aeroacoustic Modernization Project, which was undertaken to improve the anechoic characteristics of the 40x80's closed test section as well as reduce the levels of background noise in the facility. The resulting 40x80 anechoic environment was described by Soderman et. al., and the current paper describes the resulting 40x80 background noise, discusses the sources of the noise, and draws comparisons to previous 40x80 background noise levels measurements. At low wind speeds or low frequencies, the 40x80 background noise is dominated by the fan drive system. To obtain the lowest fan drive noise for a given tunnel condition, it is possible in the 40x80 to reduce the fans' rotational speed and adjust the fans' blade pitch, as described by Schmidtz et. al. This idea is not new, but has now been operationally implemented with modifications for increased power at low rotational speeds. At low to mid-frequencies and at higher wind speeds, the dominant noise mechanism was thought to be caused by the surface interface of the previous test section floor acoustic lining. In order to reduce this noise mechanism, the new test section floor lining was designed to resist the pumping of flow in and out of the space between the grating slats required to support heavy equipment. In addition, the lining/flow interface over the entire test section was designed to be smoother and quieter than the previous design. At high wind speeds or high frequencies, the dominant source of background noise in the 40x80 is believed to be caused by the response of the in-flow microphone probes (required by the nature of the closed test section) to the fluctuations in the freestream flow. The resulting background noise levels are also different for probes of various diameters and types. The inflow microphone support strut is also a source of background noise but this source's impact may be minimized by careful design of the strut. In the present paper, the mechanisms mentioned above are discussed in detail. Their frequency and velocity ranges of dominance are defined and the differences between past and current facility background noise levels are presented. This paper gives valuable information for those wishing to make acoustic measurements in the 40x80. With this report and an estimate of the noise levels produced by the noise source of interest, it should be possible to determine the signal-to-noise ratios and measurement locations to successfully perform aeroacoustic testing in the NASA Ames Research Center's 40- by 80-Foot Wind Tunnel.

Allen, Christopher S.↗

Coarse Grid Modeling of Turbine Film Cooling Flows Using Volumetric Source Terms

The recent trend in numerical modeling of turbine film cooling flows has been toward higher fidelity grids and more complex geometries. This trend has been enabled by the rapid increase in computing power available to researchers. However, the turbine design community requires fast turnaround time in its design computations, rendering these comprehensive simulations ineffective in the design cycle. The present study describes a methodology for implementing a volumetric source term distribution in a coarse grid calculation that can model the small-scale and three-dimensional effects present in turbine film cooling flows. This model could be implemented in turbine design codes or in multistage turbomachinery codes such as APNASA, where the computational grid size may be larger than the film hole size. Detailed computations of a single row of 35 deg round holes on a flat plate have been obtained for blowing ratios of 0.5, 0.8, and 1.0, and density ratios of 1.0 and 2.0 using a multiblock grid system to resolve the flows on both sides of the plate as well as inside the hole itself. These detailed flow fields were spatially averaged to generate a field of volumetric source terms for each conservative flow variable. Solutions were also obtained using three coarse grids having streamwise and spanwise grid spacings of 3d, 1d, and d/3. These coarse grid solutions used the integrated hole exit mass, momentum, energy, and turbulence quantities from the detailed solutions as volumetric source terms. It is shown that a uniform source term addition over a distance from the wall on the order of the hole diameter is able to predict adiabatic film effectiveness better than a near-wall source term model, while strictly enforcing correct values of integrated boundary layer quantities.

Heidmann, James D.↗

Micromachined TWTs for THz Radiation Sources

The Terahertz (THz) region of the electromagnetic spectrum (about 300 - 3000 GHz in frequency or about 0.1 - 1 mm free space wavelength) has enormous potential for high-data-rate communications, spectroscopy, astronomy, space research, medicine, biology, surveillance, remote sensing, industrial process control, etc. It has been characterized as the most scientifically rich, yet under-utilized, region of the electromagnetic spectrum. The most critical roadblock to full exploitation of the THz band is lack of coherent radiation sources that are powerful (0.001 - 1.0 W continuous wave), efficient (> 1%), frequency agile (instantaneously tunable over 1% bandwidths or more), reliable, and comparatively inexpensive. To develop vacuum electron device (VED) radiation sources satisfying these requirements, fabrication and packaging approaches must be heavily considered to minimize costs, in addition to the basic interaction physics and circuit design. To minimize size of the prime power supply, beam voltage must be minimized, preferably 10 kV. Solid state sources satisfy the low voltage requirement, but are many orders of magnitude below power, efficiency, and bandwidth requirements. On the other hand, typical fast-wave VED sources in this regime (e.g., gyrotrons, FELs) tend to be large, expensive, high voltage and very high power devices unsuitable for most of the applications cited above. VEDs based on grating or inter-digital (ID) circuits have been researched and developed. However, achieving forward-wave amplifier operation with instantaneous fractional bandwidths > 1% is problematic for these devices with low-energy (< 15 kV) electron beams. Moreover, the interaction impedance is quite low unless the beam-circuit spacing is kept particularly narrow, often leading to significant beam interception. One solution to satisfy the THz source requirements mentioned above is to develop micromachined VEDs, or "micro-VEDs". Among other benefits, micro-machining technologies provide superior high frequency wall conductivity as a result of superior surface smoothness compared with conventional mechanical or electric discharge machining approaches. Micro-VED technologies are already being applied to the development of millimeter-wave klystrons at Stanford Linear Accelerator Center and submillimeter-wave klystrons at the University of Leeds. We are investigating the use of micro-machining technologies to develop THz regime TWTs, with emphasis on folded-waveguide TWTs. The folded-waveguide TWT (FW-TWT) has several features that make it attractive for THz-regime micro-VED applications. It is a relatively simple circuit to design and fabricate, it is amenable to precision pattern replication by micro-machining, and it is has been demonstrated capable of forward-wave amplification with appreciable bandwidth. We are conducting experimental and computational studies of micro-VED FW-TWTs to examine their feasibility for applications at frequencies from 200 - 1000 GHz.

Booske, John H.↗

Detection of Sub-Surface Water on Mars by Controlled and Natural Source Electromagnetic Induction

Detection of subsurface liquid water on Mars is a leading scientific objective for Mars exploration in this decade. We describe electromagnetic induction (EM) methods that are both uniquely well suited for detection of subsurface liquid water on Mars and practical within the context of a Mars exploration program. EM induction methods are ideal for detection of more highly conducting (liquid water bearing) soils and rock beneath a more resistive overburden. A combined natural source and controlled source method offers an efficient and unambiguous characterization of the depth to liquid water and the extent of the aqueous region. The controlled source method employs an ac vertical dipole source (horizontal loop) to probe the depth to the conductor and a natural source method (gradient sounding) to characterize its conductivity-thickness product. These methods are proven in geophysical exploration and can be tailored to cope with any reasonable Mars crustal electrical conductivity. We describe a practical experiment and discuss experiment optimization to address the range of material properties likely encountered in the Mars crust.

Connerney, J. E. P.↗

Polarimeter for Low Energy X-ray Astrophysical Sources (PLEXAS)

The Polarimeter for Low Energy X-ray Astrophysical Sources (PLEXAS) is an astrophysics mission concept for measuring the polarization of X-ray sources at low energies below the C-K band (less than 277 eV). PLEXAS uses the concept of variations in the reflectivity of a multilayered X-ray telescope as a function of the orientation of an X-rays polarization vector with respect to the reflecting surface of the optic. By selecting an appropriate multilayer, and rotating the X-ray telescope while pointing to a source, there will be a modulation in the source intensity, as measured at the focus of the telescope, which is proportional to the degree of polarization in the source.

Murray, Stephen S.↗

Developing an Open Source Option for NASA Software

We present arguments in favor of developing an Open Source option for NASA software; in particular we discuss how Open Source is compatible with NASA's mission. We compare and contrast several of the leading Open Source licenses, and propose one - the Mozilla license - for use by NASA. We also address some of the related issues for NASA with respect to Open Source. In particular, we discuss some of the elements in the External Release of NASA Software document (NPG 2210.1A) that will likely have to be changed in order to make Open Source a reality withm the agency.

Moran, Patrick J.↗

North Alabama Lightning Mapping Array (LMA): VHF Source Retrieval Algorithm and Error Analyses

Two approaches are used to characterize how accurately the North Alabama Lightning Mapping Array (LMA) is able to locate lightning VHF sources in space and in time. The first method uses a Monte Carlo computer simulation to estimate source retrieval errors. The simulation applies a VHF source retrieval algorithm that was recently developed at the NASA Marshall Space Flight Center (MSFC) and that is similar, but not identical to, the standard New Mexico Tech retrieval algorithm. The second method uses a purely theoretical technique (i.e., chi-squared Curvature Matrix Theory) to estimate retrieval errors. Both methods assume that the LMA system has an overall rms timing error of 50 ns, but all other possible errors (e.g., multiple sources per retrieval attempt) are neglected. The detailed spatial distributions of retrieval errors are provided. Given that the two methods are completely independent of one another, it is shown that they provide remarkably similar results. However, for many source locations, the Curvature Matrix Theory produces larger altitude error estimates than the (more realistic) Monte Carlo simulation.

Koshak, W. J.↗

Local and Remote Sources of Precipitation during the 1993 Midwestern United States Flood

During June and July of 1993, devastating and persistent rainfall caused substantial damage in the Midwest United States primarily focused on the Mississippi River Basin. Above noma1 springtime rains primed the region for flooding. The resulting wet soil was thought to be a major source of water for the heavy summer precipitation. On the other hand, northward moisture transport was extremely intense during the summer. In this study, we have implemented passive tracers to diagnose the geographic source of water for precipitation, called Water Vapor Tracers (WVT), into the NASA Data Assimilation Office (DAO) Data Assimilation System (DAS). The WVT diagnostics can produce detailed budgets of the geographical sources of water that precipitates in any region, and they consider physical and dynamical tendencies at the model time step. The 1993 summer has been reanalyzed with the new WVT diagnostics to better understand the local and remote source of water for precipitation during the flood. Because the DAS also uses observations of water in the atmospheric hydrologic budget, we will also evaluate the impact of the observations on the local and remote sources of water in the DAS.

Bosilovich, Michael↗

The Earth Occultation Technique with the Burst and Transient Source Experiment

The Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory (CGRO) is successfully being used as an all-sky hard X-ray monitor. The experiment consists of a set of eight uncollimated detectors sensitive to photons in the 20 keV to 2 MeV range. Since CGRO orbits the Earth at an altitude of about 450 km, about 33% of the sky, as viewed with BATSE, is covered by the Earth at any given time. The entire sky is subject to Earth occultation for some portion of CGRO's 52 day precession period. When a source sets below or rises above the Earth's limb, atmospheric attenuation produces step-like features in the BATSE data. The observed change in count rate in several energy bands provides a measurement of the source intensity and spectrum without sophisticated background models. These occultation features are used to locate and monitor astrophysical sources with BATSE when the source signal can be separated from the detector background. Examples of step searches, spectra, light curves, and transform imaging are presented.

Wilson, C. A.↗

A New Method to Resolve X-Ray Halos around Point Sources with Chandra Data and Its Application to Cygnus X-1

With excellent angular resolution, good energy resolution, and a broad energy band, the Chandra Advanced CCD Imaging Spectrometer (ACIS) is the best instrument for studying the X-ray halos around some Galactic X-ray point sources caused by the dust scattering of X-rays in the interstellar medium. However, the direct images of bright sources obtained with the ACIS usually suffer from severe pileup. Making use of the fact that an isotropic image could be reconstructed from its projection in to any direction, we can reconstruct the images of the X-ray halos from the data obtained with the High Energy Transition Grating Spectrometer (HETGS) and/or in continuos clocking (CC) mode. These data have no or less serious pileup and enable us to take full advantage of the excellent angular resolution of Chandra. With the reconstructed high-resolution images, we can probe the X-ray halos as close as 1" to their associated point sources. Applying this method to Cygnus X-1 observed with the Chandra HETGS in CC mode, we derived an energy-dependent radial halo flux distribution and concluded that in a circular region (2' in radius) centered a the point source: (1) relative to the total intensity, the fractional halo intensity is about 15% at keV and drops to aboout 5% at approximately 6 keV (2) about 50% of the halo photons are within the region of a radius less than 40 inches and (3) the spectrum of the pooint source is slightly distorted by the halo contamination.

Yao, Yangsen↗