Search NASA⌕ Search

SEARCH · Search NASA

Results for “STANDARDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

The Importance of Dosimetry Standardization in Radiobiology

Radiation dose is central to much of radiobiological research. Precision and accuracy of dose measurements and reporting of the measurement details should be sufficient to allow the work to be interpreted and repeated and to allow valid comparisons to be made, both in the same laboratory and by other laboratories. Despite this, a careful reading of published manuscripts suggests that measurement and reporting of radiation dosimetry and setup for radiobiology research is frequently inadequate, thus undermining the reliability and reproducibility of the findings. To address these problems and propose a course of action, the National Cancer Institute (NCI), the National Institute of Allergy and Infectious Diseases (NIAID), and the National Institute of Standards and Technology (NIST) brought together representatives of the radiobiology and radiation physics communities in a workshop in September, 2011. The workshop participants arrived at a number of specific recommendations as enumerated in this paper and they expressed the desirability of creating dosimetry standard operating procedures (SOPs) for cell culture and for small and large animal experiments. It was also felt that these SOPs would be most useful if they are made widely available through mechanism(s) such as the web, where they can provide guidance to both radiobiologists and radiation physicists, be cited in publications, and be updated as the field and needs evolve. Other broad areas covered were the need for continuing education through tutorials at national conferences, and for journals to establish standards for reporting dosimetry. This workshop did not address issues of dosimetry for studies involving radiation focused at the sub-cellular level, internally-administered radionuclides, biodosimetry based on biological markers of radiation exposure, or dose reconstruction for epidemiological studies.

61 RADIATION PROTECTION AND DOSIMETRY↗

Complete one-loop matching for a singlet scalar in the Standard Model EFT

We present the results of the first complete one-loop matching calculation between the real singlet scalar extension of the Standard Model and the Standard Model effective field theory (SMEFT) at dimension six. Beyond their immediate relevance to the precision calculation of observables in singlet extensions of the Standard Model, our results illustrate a variety of general features of one-loop matching. We explore the interplay between non-supersymmetric non-renormalization theorems, the logarithmic dependence of Wilson coefficients, and the relevance of mixed diagrams in theories with large scale separation. In addition, we highlight some of the subtleties involved in computing observables at next-to-leading order in SMEFT by mapping our results to the T parameter at one loop.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for physics beyond the standard model in dilepton mass spectra in proton-proton collisions at √s = 8 TeV

Dimuon and dielectron mass spectra, obtained from data resulting from proton-proton collisions at 8 TeV and recorded by the CMS experiment, are used to search for both narrow resonances and broad deviations from standard model predictions. The data correspond to an integrated luminosity of 20.6 (19.7) fb –1 for the dimuon (dielectron) channel. No evidence for non-standard-model physics is observed and 95% confidence level limits are set on parameters from a number of new physics models. The narrow resonance analyses exclude a Sequential Standard Model Z SSM ' resonance lighter than 2.90 TeV, a superstring-inspired Z ψ ' lighter than 2.57 TeV, and Randall-Sundrum Kaluza-Klein gravitons with masses below 2.73, 2.35, and 1.27 TeV for couplings of 0.10, 0.05, and 0.01, respectively. A notable feature is that the limits have been calculated in a model-independent way to enable straightforward reinterpretation in any model predicting a resonance structure. The observed events are also interpreted within the framework of two non-resonant analyses: one based on a large extra dimensions model and one based on a quark and lepton compositeness model with a left-left isoscalar contact interaction. Lower limits are established on MS, the scale characterizing the onset of quantum gravity, which range from 4.9 to 3.3 TeV, where the number of additional spatial dimensions varies from 3 to 7. Thus lower limits on Λ, the energy scale parameter for the contact interaction, are found to be 12.0 (15.2) TeV for destructive (constructive) interference in the dimuon channel and 13.5 (18.3) TeV in the dielectron channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sterile neutrinos with non-standard interactions in β- and 0νββ-decay experiments

Charged currents are probed in low-energy precision β -decay experiments and at high-energy colliders, both of which aim to measure or constrain signals of beyond-the-Standard-Model physics. In light of future β -decay and LHC measurements that will further explore these non-standard interactions, we investigate what neutrinoless double- β decay (0 νββ ) experiments can tell us if a nonzero signal were to be found. Using a recently developed effective-field-theory framework, we consider the effects that interactions with right-handed neutrinos have on 0 νββ and discuss the range of neutrino masses that current and future 0 νββ measurements can probe, assuming neutrinos are Majorana particles. For non-standard interactions at the level suggested by recently observed hints in β decays, we show that next-generation 0 νββ experiments can determine the Dirac or Majorana nature of neutrinos, for sterile neutrino masses larger than $\mathcal{O}(10)$ eV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Glassy carbon as an absolute intensity calibration standard for small-angle scattering.

Absolute calibration of small-angle scattering (SAS) intensity data (measured in terms of the differential scattering cross section per unit sample volume per unit solid angle) is essential for many important aspects of quantitative SAS analysis, such as obtaining the number density, volume fraction, and specific surface area of the scatterers. It also enables scattering data from different instruments (light, X-ray, or neutron scattering) to be combined, and it can even be useful to detect the existence of artifacts in the experimental data. Different primary or secondary calibration methods are available. In the latter case, absolute intensity calibration requires a stable artifact with the necessary scattering profile. Glassy carbon has sometimes been selected as this intensity calibration standard. Here we review the spatial homogeneity and temporal stability of one type of commercially available glassy carbon that is being used as an intensity calibration standard at a number of SAS facilities. We demonstrate that glassy carbon is sufficiently homogeneous and stable during routine use to be relied upon as a suitable standard for absolute intensity calibration of SAS data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Importance of Standardizing Analytical Characterization Methodology for Improved Reliability of the Nanomedicine Literature

Understanding the interaction between biological structures and nanoscale technologies, dubbed the nano-bio interface, is required for successful development of safe and efficient nanomedicine products. The lack of a universal reporting system and decentralized methodologies for nanomaterial characterization have resulted in a low degree of reliability and reproducibility in the nanomedicine literature. As such, there is a strong need to establish a characterization system to support the reproducibility of nanoscience data particularly for studies seeking clinical translation. Here, we discuss the existing key standards for addressing robust characterization of nanomaterials based on their intended use in medical devices or as pharmaceuticals. We also discuss the challenges surrounding implementation of such standard protocols and their implication for translation of nanotechnology into clinical practice. We, however, emphasize that practical implementation of standard protocols in experimental laboratories requires long-term planning through integration of stakeholders including institutions and funding agencies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Addition of Bevacizumab to Standard Radiation Therapy and Daily Temozolomide Is Associated With Minimal Toxicity in Newly Diagnosed Glioblastoma Multiforme

Purpose: To determine the safety of the addition of bevacizumab to standard radiation therapy and daily temozolomide for newly diagnosed glioblastoma multiforme (GBM). Methods and Materials: A total of 125 patients with newly diagnosed GBM were enrolled in the study, and received standard radiation therapy and daily temozolomide. All patients underwent a craniotomy and were at least 2 weeks postoperative. Radiation therapy was administered in 1.8-Gy fractions, with the clinical target volume for the primary course treated to a dose of 45 to 50.4 Gy, followed by a boost of 9 to 14.4 Gy, to a total dose of 59.4 Gy. Patients received temozolomide at 75 mg/m{sup 2} daily throughout the course of radiation therapy. Bevacizumab was given at 10 mg/kg intravenously every 14 days, beginning a minimum of 4 weeks postoperatively. Results: Of the 125 patients, 120 (96%) completed the protocol-specified radiation therapy. Five patients had to stop the protocol therapy, 2 patients with pulmonary emboli, and 1 patient each with a Grade 2 central nervous system hemorrhage, Grade 4 pancytopenia, and wound dehiscence requiring surgical intervention. All 5 patients ultimately finished the radiation therapy. After radiation therapy, 3 patients had progressive disease, 2 had severe fatigue and decreased performance status, 1 patient had a colonic perforation, and 1 had a rectal fissure; these 7 patients therefore did not proceed with the protocol-specified adjuvant temozolomide, bevacizumab, and irinotecan. However, 113 patients (90%) were able to continue on study. Conclusions: The addition of bevacizumab to standard radiation therapy and daily temozolomide was found to be associated with minimal toxicity in patients newly diagnosed with GBM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multi-lab study on the pure-gas permeation of commercial polysulfone (PSf) membranes: Measurement standards and best practices

Gas-separation membranes are a critical industrial component for a low-carbon and energy-efficient future. As a result, many researchers have been testing membrane materials over the past several decades. Unfortunately, almost all membrane-based testing systems are home-built, and there are no widely accepted material standards or testing protocols in the literature, making it challenging to accurately compare experimental results. Further, in this multi-lab study, ten independent laboratories collected high-pressure pure-gas permeation data for H 2 , O 2 , CH 4 , and N 2 in commercial polysulfone (PSf) films. Equipment information, testing procedures, and permeation data from all labs were collected to provide (1) accepted H 2 , O 2 , CH 4 , and N 2 permeability values at 35°C in PSf as a reference standard, (2) statistical analysis of lab-to-lab uncertainties in evaluating permeability, and (3) a list of best practices for sample preparation, equipment set-up, and permeation testing using constant-volume variable-pressure apparatuses. Results summarized in this work provide a reference standard and recommended testing protocols for pure-gas testing of membrane materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A standard capsule design for structural material testing in the Advanced Test Reactor

Nuclear materials testing is commonly completed in various material test and research reactors throughout the world, including the Advanced Test Reactor (ATR), but the current capsule design, analysis, and fabrication process can take years to complete. To decrease the costs and time associated with materials testing, a standard capsule has been designed which houses various specimen geometries and allows irradiation in virtually any ATR test position. The standard capsule features locking end caps which connect and lock together to form the capsule stack, eliminating the need for a basket and maximizing the quantity of specimens which are contained within the capsule. A customizable internal gas gap provides thermal resistance between the specimens and reactor coolant, making specimen temperatures from approximately 370 to 1000 K achievable. The flexibility of the capsule design allows experimenters to choose irradiation positions based off desired neutron flux, with typical fluences per cycle ranging from 8.8x10 19 to 2.3x10 21 n/cm 2 , depending on experiment position. Here this paper presents and discusses the standard capsule design and analysis.

36 MATERIALS SCIENCE↗

Comparison of the performance of TLD, OSL and RPL personal dosimetry systems to the American National Standard Institute (ANSI) test categories

The Laboratory Accreditation Program (LAP) tests the capability and performance of the United States Department of Energy's (USDOE) facilities to accurately measure and quantify the whole-body and extremity radiation equivalent doses to the occupational workers. The dosimetry methods used in personal dosimetry can be Thermoluminescence (TL), Optically Stimulated Luminescence (OSL) and Radiophotoluminescence (RPL), among other techniques available. Currently, the TL (LiF:Mg,Ti) and OSL (Al 2 O 3 :C) dosimetry systems are DOELAP-accredited for occupational dose measurements and regulatory reporting. In this study, the performance of a beryllium oxide (BeO) OSL dosimetry system and of a silver-doped phosphate glass RPL dosimetry system is compared against the performance of an accredited LiF:Mg,Ti TL dosimetry system. The bias and standard deviation in each of the performance test categories are compared between these three systems for exposures to photons, beta, and mixed radiation fields with the criteria established by the American National Standard Institute (ANSI) and Health Physics Society (HPS) N13.11-2022 standard. The practical implementation of the dosimetry program and its equivalency to the occupational personal equivalent dose H p (0.07) and H p (10) measurements were evaluated. The TL, OSL and RPL dosimetry systems passed the ANSI performance test criteria for H p (0.07) and H p (10) occupational dose measurements and met the DOELAP accreditation requirements.

61 RADIATION PROTECTION AND DOSIMETRY↗

A review of regulatory standard test methods for residential wood heaters and recommendations for their advancement

In many regions, residential wood heaters are a leading source of harmful air pollution but only satisfy a small portion of local heating demands. In response, standardized laboratory test methods have been developed to characterize and limit wood heater emissions. While these test methods are a key tool for advancing both wood heater technology and environmental regulations, many of the experimental procedures are outdated and provide few actionable insights for improving heater performance. Furthermore, these test methods vary widely around the world and may not adequately capture the performance of wood heaters operating in residences. This study presents a comprehensive review of standardized wood heater test methods to identify fundamental experimental objectives and regulated performance metrics. Using the results of this review, recommendations are provided to make the test methods more accessible and representative of residential performance, while generating actionable data to motivate heater design improvements. This study elucidates the current state of standard test methods, and the developments needed to advance clean wood heater technologies and public policies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Standards of conduct: new focus, new challenges

The new Standards apply to fewer employees and require less information, implying a lesser regulatory burden. However, when the Standards of Conduct are coupled with tough enforcement standards and other laws and regulations intended to level the playing field, Order No. 717 may not have lowered the barriers but rather merely adjusted them. Transmission providers must focus and toughen their compliance programs accordingly. (author)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Exploring the Standard Model with the High Luminosity, Polarized Electron-Ion Collider

The Standard Model is only a few decades old and has been successfully confirmed by experiment, particularly at the high energy frontier. This will continue with renewed vigor at the LHC. However, many important elements of the Standard Model remain poorly understood. In particular, the exploration of the strong interaction theory Quantum Chromodynamics is in its infancy. How does the spin-1/2 of the proton arise from the fundamental quark and gluon constituents? Can we understand the new QCD world of virtual quarks and gluons in the nucleon? Using precision measurements can we test the limits of the Standard Model and look for new physics? To address these and other important questions, physicists have developed a concept for a new type of accelerator, namely a high luminosity, polarized electron-ion collider. Here the scientific motivation is summarized and the accelerator concepts are outlined.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Real Z{sub 2}-bigradings, Majorana modules, and the standard model action

The action functional of the standard model of particle physics is intimately related to a specific class of first order differential operators called Dirac operators of Pauli type ('Pauli-Dirac operators'). The aim of this article is to carefully analyze the geometrical structure of this class of Dirac operators on the basis of real Dirac operators of simple type. On the basis of simple type Dirac operators, it is shown how the standard model action (STM action) may be viewed as generalizing the Einstein-Hilbert action in a similar way that the Einstein-Hilbert action is generalized by a cosmological constant. Furthermore, we demonstrate how the geometrical scheme presented allows to naturally incorporate also Majorana mass terms within the standard model. For reasons of consistency, these Majorana mass terms are shown to dynamically contribute to the Einstein-Hilbert action by a 'true' cosmological constant. Due to its specific form, this cosmological constant can be very small. Nonetheless, this cosmological constant may provide a significant contribution to dark matter/energy. In the geometrical description presented, this possibility arises from a subtle interplay between Dirac and Majorana masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nuclear Physics and the New Standard Model

Nuclear physics studies of fundamental symmetries and neutrino properties have played a vital role in the development and confirmation of the Standard Model of fundamental interactions. With the advent of the CERN Large Hadron Collider, experiments at the high energy frontier promise exciting discoveries about the larger framework in which the Standard Model lies. In this talk, I discuss the complementary opportunities for probing the 'new Standard Model' with nuclear physics experiments at the low-energy high precision frontier.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A programmable quantum current standard from the Josephson and the quantum Hall effects

We propose a way to realize a programmable quantum current standard (PQCS) from the Josephson voltage standard and the quantum Hall resistance standard (QHR) exploiting the multiple connection technique provided by the quantum Hall effect (QHE) and the exactness of the cryogenic current comparator. The PQCS could lead to breakthroughs in electrical metrology like the realization of a programmable quantum current source, a quantum ampere-meter, and a simplified closure of the quantum metrological triangle. Moreover, very accurate universality tests of the QHE could be performed by comparing PQCS based on different QHRs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy Efficiency and Emissions Intensity Standards

We investigate the role of energy efficiency in rate-based emissions intensity standards, a particularly policy-relevant consideration given that the Environmental Protection Agency's Clean Power Plan allows crediting of electricity savings as a means of complying with state-specific emissions standards. We show that with perfectly inelastic energy services demand, crediting efficiency measures can recover the first-best allocation. However, when demand for energy services exhibits some elasticity, crediting energy efficiency can no longer recover first-best. While crediting removes the relative distortion between energy generation and energy efficiency, it distorts the absolute level of energy services. Building on these results, we derive the conditions determining the second-best intensity standard and crediting rule. Simulations calibrated to the electricity sector in Texas find that while some form of crediting is generally welfare-improving, the proposed one-for-one crediting of energy savings is unlikely to achieve efficient outcomes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Higgs chaotic inflation in standard model and NMSSM

We construct a chaotic inflation model in which the Higgs fields play the role of the inflaton in the standard model as well as in the singlet extension of the supersymmetric standard model. The key idea is to allow a non-canonical kinetic term for the Higgs field. The model is a realization of the recently proposed running kinetic inflation, in which the coefficient of the kinetic term grows as the inflaton field. The inflaton potential depends on the structure of the Higgs kinetic term. In the simplest cases, the inflaton potential is proportional to φ{sup 2} and φ{sup 2/3} in the standard model and NMSSM, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗