Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Spectrophotometry of Michigan-Tololo quasars

Emission-line quasar characteristics are confirmed for 80% of the objects observed, including at least four new quasars with spectral features indicative of supernova-like outflow. Approximately 73% of the redshifts predicted from the discovery plates are found accurate with a mean error in z of 0.03, and a large range of z (from about 0.1 to 3.16) is represented in the sample. The observed redshift distribution for quasars is marginally consistent with a constant co-moving quasar density above z approximately 2.0. The shape of the redshift distribution may be used as an isotropy probe with a cosmic time resolution of a few times one-hundred million years in the early universe; therefore, continued surveys of this sort are important even if accurate magnitudes are not determined.

Lewis, D. W.↗

Photoelectrolysis of water at high current density - Use of laser light excitation of semiconductor-based photoelectrochemical cells

In the present paper, some results are given for UV laser light irradiation of the photoanode (SnO2, SrTiO3, or TiO2) in a cell for the light-driven electrolysis of H2O, at radiation intensities of up to 380 W/sq cm. The properties of the anode material are found to be independent of light intensity. Conversion of UV light to stored chemical energy in the form of 2H2/O2 from H2O was driven at a rate of up to 30 W/sq cm. High O2 evolution rates at the irradiated anodes without changes in the current-voltage curves are attributed to the excess oxidizing power associated with photogenerated holes. A test for this sort of hypothesis for H2 evolution at p-type materials is proposed.

Wrighton, M. S.↗

Photon position determination using microchannel plates

The reasons for developing an X-ray photon position detector and a description of the system and its laboratory performance have been presented by Kubierschky et al. (1977) and by Kellogg et al. (1976). The reported investigation is concerned with an expansion of the design criteria for the analog function and their implementation in available hardware. A charge event is received by the preamplifier of each axis, grouped and processed by the summing amplifiers, verified by the pulse height analyzer, sorted by the charge center detector, stored by sample/holds, and converted by the multiplying analog to digital converter. The various components are discussed.

Harrison, D.↗

Core 74001/2 - Grain size and petrology as a key to the rate of in-situ reworking and lateral transport on the lunar surface

A suite of samples from the double drive tube 74001/2 has been studied. Material from this core mainly consists of orange and black droplets interpreted to be volcanic pyroclastic ejecta. Grain size analysis indicates that this material is very homogeneous in its grain size properties. It is also the finest and best sorted suite of soil samples in the lunar collection having a mean grain size of 40 microns and a mean standard deviation of 1.75 phi. The upper 5.5 cm of this core has apparently undergone in situ reworking by meteorites over a period of about 10 million years. This reworked zone contains 'exotic' grains including basalt, mineral fragments, vitric breccias, and agglutinates. One type of agglutinate is unique and has been made primarily from orange and black glass droplets melted and welded together by micrometeorite impacts. Other agglutinates are made mainly from basaltic fragments and minerals. The amount of 'exotic' material added to the core combined with an estimate of the location of the source areas for the 'exotic' material allows us to estimate that a maximum of about 0.36 gm per sq cm of regolith surface is added from a radius of about 1 meter in 10 million years. Furthermore, no more than about 0.01 gm per sq cm of regolith surface is added from a radius of about 100 meters in 10 million years.

Mckay, D. S.↗

Solar heating for an electronics manufacturing plant--Blue Earth, Minnesota

Partial space heating for 97,000 square foot plant is supplied by 360 flat plate solar collectors; energy is sorted as heat in indoor 20,000 gallon water tank. System includes all necessary control electronics for year round operation. During December 1978, solar energy supplied 24.4 percent of building's space heating load.

Source record↗

Comets: Cosmic connections with carbonaceous meteorites, interstellar molecules and the origin of life

The ions, radicals, and molecules observed in comets may be derived intact or by partial decomposition from parent compounds of the sort found either in the interstellar medium or in carbonaceous meteorites. The early loss of highly reducing primitive atmosphere and its replacement by a secondary atmosphere dominated by H2O, CO2, and N2, as depicted in current models of the earth's evolution, pose a dilemma for the origin of life: the synthesis of organic compounds necessary for life from components of the secondary atmosphere appears to be difficult, and plausible mechanisms have not been evaluated. Both comets and carbonaceous meteorites are implicated as sources for the earth's atmophilic and organogenic elements. A mass balance argument involving the estimated ratios of hydrogen to carbon in carbonaceous meteorites, comets, and the crust and upper mantle suggests that comets supplied the earth with a large fraction of its volatiles. The probability that comets contributed significantly to the earth's volatile inventory suggests a chemical evolutionary link between comets, prebiotic organic synthesis, and the origin of life.

Chang, S.↗

Development and usage of a false color display technique for presenting Seasat-A scatterometer data

A computer generated false color program which creates digital multicolor graphics to display geophysical surface parameters measured by the Seasat-A satellite scatterometer (SASS) is described. The data is incrementally scaled over the range of acceptable values and each increment and its data points are assigned a color. The advantage of the false color display is that it visually infers cool or weak data versus hot or intense data by using the rainbow of colors. For example, with wind speeds, levels of yellow and red could be used to imply high winds while green and blue could imply calmer air. The SASS data is sorted into geographic regions and the final false color images are projected onto various world maps with superimposed land/water boundaries.

Jackson, C. B.↗

BIRP: Software for interactive search and retrieval of image engineering data

Better Image Retrieval Programs (BIRP), a set of programs to interactively sort through and to display a database, such as engineering data for images acquired by spacecraft is described. An overview of the philosophy of BIRP design, the structure of BIRP data files, and examples that illustrate the capabilities of the software are provided.

Arvidson, R. E.↗

The physics of plasma injection events

In this paper, plasma injection is defined as an increase of particle flux in a detector of finite bandwidth. Injection can result from dynamic processes or from spacecraft penetration of a quasi-static spatial structure produced by a steady magnetospheric convection pattern. ATS-5 particle spectrograms are found to provide examples of plasma injection events of both sorts. Dynamic injection occurs both with and without local magnetic signatures. For events not associated with clear local magnetic signatures, convection theory with a steady or a time-varying uniform electric field can account for the energy dispersion of injected particles with energy less than 50 keV. The paper concludes with a discussion of the way in which the convection boundaries are related to the substorm injection boundary of Mauk and McIlwain. Several alternative expressions for the local time and K(p) dependence of the injection boundary are given.

Kivelson, M. G.↗

A spectral method for determining the percentage of green herbage material in clipped samples

A laboratory radiometric method for the rapid determination of green and brown vegetation percentages in clipped grass samples has been developed and tested. The method uses red and photographic infrared radiance or reflectance differences between green and brown vegetation. Mixtures of green and brown material were found to have radiances or reflectances proportional to the percentage of green material present. This method may permit the use of rapid green/brown radiometric determinations to replace the tedious hand sorting now generally used. It may also have application in remote sensing of vegetation ground-truth work where the determination of dry green biomass in clipped samples is necessary.

Tucker, C. J.↗

Isotopic yields of Mg, Al from the carbon and neon zones in the explosion of a massive star

A model is developed for the nucleosynthetic yields from the supernova explosion of a massive star of the sort which has been proposed as the initiating event in the formation of the solar system by Cameron and Truran (1977). Calculations start with the Hugoniot curves, estimating the preshock conditions from a 25 solar masses model at the start of core collapse. It is shown that the products of static carbon burning dominate abundance patterns in the ejecta. Both explosive carbon burning and explosive neon burning contribute significantly to Al-26. The production of Al-26 in this model is consistent with the trigger hypothesis.

Morgan, J. A.↗

A line parameter list for the nu2 and nu4 bands of /C-12/H4 and /C-13/H4, extended to J-prime = 25 and its application to planetary atmospheres

Line parameters (transition frequencies, line strengths, line widths, ground state energies and quantum identifications) for the nu2 and nu4 bands of (C-12)H4 and (C-13)H4 have been calculated for J-prime equal to or less than 25 using the simultaneous coupled fitting procedure of Gray and Robiette. Molecular constants for the nu2 band of (C-13)H4 were estimated from isotopic shifts from (C-12)H4 values. Agreement with laboratory spectra, where available, is always well within 1 kayser over the entire spectral range covered by the list. The most serious problem in comparison with laboratory data is the omission of lines belonging to 'hot' bands in this spectral region. This list is valuable in remote sensing problems for sorting out lines of trace species from weak methane lines and for determining the atmospheric opacity in relatively transparent spectral regions. Applications of the parameter list are demonstrated for remote sounding of the Jovian atmosphere.

Orton, G. S.↗

Chemical and isotopic fractionation by grain size separates

Fractionation of refractory elements according to grain size is argued to occur during their growth. Two major modes should exist: (1) during thermal condensation sequences whenever the condensing phase (e.g. Mg2SiO4) does not alloy with the precondensed phase (e.g. MgAl2O4); (2) during accretion of gaseous atoms in the nonequilibrated interstellar medium. Processes dynamically sorting grains according to size (e.g. sedimentation) therefore are potentially capable of achieving fractionations normally attributed to separations of dust and gas. This paper considers the first mode during supernova condensation; however, it also can occur in an equilibrium solar condensation sequence owing to an overlooked freedom in that simplified description.

Clayton, D. D.↗

Applications Technology Satellite and Communications Technology Satellite user experiments for 1967-1980 reference book. Volume 4: Abstracts

The important user experiments conducted during the fourteen year period from 1966 to 1980 are summarized. A description of each of the satellites and a brief summary of each user experiment is presented. A cross index of user experiments sorted by various parameters and a listing of keywords versus experiment number is included. The experiments are grouped by type of service offered; for example, education, health services, and data transmission. A bibliography of reports by accession number and by author is also presented. User viewpoints of the systems are presented.

Engler, N. A.↗

Heating of the moon by heterogeneous accretion

Monte Carlo models of lunar accretion are developed by randomly sampling mass and velocity distributions of objects in the solar nebula in circumsolar and circumterrestrial orbits. The thermal effect of an impact is expressed as the volume of melt produced; the melt volumes produced by each Monte Carlo case are sorted into regions to produce percentage melt estimates as a function of radius. One-hundred cases are calculated to obtain a range of plausible thermal histories for lunar accretion. The average melt percentage estimates show substantial deep melting, but the spread of melt percentage values about the mean from the random sampling procedure is wide enough to include 0% melting for radii below 100 km and 100% melting for radii below 500 km.

Ransford, G. A.↗

Determination of the total grain size distribution in a vulcanian eruption column, and its implications to stratospheric aerosol perturbation

The total grain distribution of tephra from the eruption by the Fuego volcano in Guatemala on Oct. 14, 1974 was determined by grain size analysis. The region within each isopach has a grain distribution which was weighted proportionally to its percentage volume; the total distribution had a median grain size of 0.6 mm and a sorting coefficient of 2.3. The ash composed of fine particles did not fall in the volcano area as part of the recognizable tephra blanket; the eruption column reached well into the stratosphere to the height of 10-12 km above sea level, with mass flux rate estimated altitudes of 18-23 km

Murrow, P. J.↗

A computer graphics display technique for the examination of aircraft design data

An interactive computer graphics technique has been developed for quickly sorting and interpreting large amounts of aerodynamic data. It utilizes a graphic representation rather than numbers. The geometry package represents the vehicle as a set of panels. These panels are ordered in groups of ascending values (e.g., equilibrium temperatures). The groups are then displayed successively on a CRT building up to the complete vehicle. A zoom feature allows for displaying only the panels with values between certain limits. The addition of color allows a one-time display thus eliminating the need for a display build up.

Talcott, N. A., Jr.↗