Search NASA⌕ Search

SEARCH · Search NASA

Results for “VALENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Photoinduced charge-transfer process in rubidium manganese hexacyanoferrate probed by Raman spectroscopy

The photoinduced charge-transfer process in Rb{sub 0.94}Mn[Fe(CN){sub 6}]{sub 0.98}{center_dot}0.2H{sub 2}O is investigated by observing the valence states of the metal ions by Raman spectroscopy. The sample in the high-temperature phase is irradiated at the ligand to metal, CN{sup -}{yields}Fe(III) and charge-transfer band ({lambda}=395 nm). The Fe(III)-CN-Mn(II) pair valence state corresponding to the high-temperature configuration is totally depleted after prolonged irradiation, and the Fe(II)-CN-Mn(III) pair valence state corresponding to the low-temperature configuration appears. In addition, two kinds of CN stretching modes, ascribed to Fe(II)-CN-Mn(II) and Fe(III)-CN-Mn(III) pair valence states, are found. The photoproduction process of each pair valence states is well reproduced by a kinetic model assuming a charge transfer from Mn(II) to Fe(III). During irradiation, continuous shifts of the Raman peaks are found and ascribed to a release of the strain due to the lattice mismatching between the high-temperature and the photoinduced phases. This behavior indicates that the photoinduced phase created locally in the high-temperature-phase lattice grows up to a photoinduced phase domain. The conversion efficiency is lowered with decreasing temperature, indicating the existence of an energy barrier. We propose a model, which can explain the existence of an energy barrier in the electronic excited state.

36 MATERIALS SCIENCE↗

Electronic band structure of ZnO-rich highly mismatched ZnO{sub 1−x}Te{sub x} alloys

We synthesized ZnO{sub 1−x}Te{sub x} alloys with Te composition x < 0.23 by using pulsed laser deposition. Alloys with x < 0.06 are crystalline with a columnar growth structure while samples with higher Te content are polycrystalline with random grain orientation. Electron microscopy images show a random distribution of Te atoms with no observable clustering. We found that the incorporation of a small concentration of Te (x ∼ 0.003) redshifts the ZnO optical absorption edge by more than 1 eV. The minimum band gap obtained in this work is 1.8 eV for x = 0.23. The optical properties of the alloys are explained by the modification of the valence band of ZnO, due to the anticrossing interactions of the localized Te states with the ZnO valence band extended states. Hence, the observed large band gap reduction is primarily originating from the upward shift of the valence band edge. We show that the optical data can be explained by the band anticrossing model with the localized level of Te located at 0.95 eV above the ZnO valence band and the band anticrossing coupling constant of 1.35 eV. These parameters allow the prediction of the compositional dependence of the band gap as well as the conduction and the valence band offsets in the full composition range of ZnO{sub 1−x}Te{sub x} alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of chromium trihalides beyond density functional theory

In this work, we explore the electronic band structure of freestanding monolayers of chromium trihalides Cr X 3 , X = Cl, Br, I, within an advanced ab initio theoretical approach based on the use of Green's function functionals. We compare the local density approximation with the quasiparticle self-consistent GW (QS GW ) approximation and its self-consistent extension ( QS G W ^ ) by solving the particle-hole ladder Bethe-Salpeter equations to improve the effective interaction W . We show that, at all levels of theory, the valence band consistently changes shape in the sequence Cl → Br → I , and the valence band maximum shifts from the M point to the Γ point. By analyzing the dynamic and momentum-dependent self-energy, we show that QS G W ^ adds to the localization of the systems in comparison with QS GW , thereby leading to a narrower band and reduced amount of halogens in the valence band manifold. Further analysis shows that X = Cl is most strongly correlated, and X = I is least correlated (most bandlike) as the hybridization between Cr d and X p enhances in the direction Cl → Br → I . For CrBr 3 and CrI 3 , we observe remarkable differences between the QS GW and QS G W ^ valence band structures, while their eigenfunctions are very similar. We show that weak perturbations, like moderate strain, weak changes to the d - p hybridization, and adding small U , can flip the valence band structures between these two solutions in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray excited Auger transitions of Pu compounds

X-ray excited Pu core–valence–valence and core–core–valence Auger line-shapes were used in combination with the Pu 4f photoelectron peaks to characterize differences in the oxidation state and local electronic structure for Pu compounds. The evolution of the Pu 4f core-level chemical shift as a function of sputtering depth profiling and hydrogen exposure at ambient temperature was quantified. The combination of the core–valence–valence Auger peak energies with the associated chemical shift of the Pu 4f photoelectron line defines the Auger parameter and results in a reliable method for definitively determining oxidation states independent of binding energy calibration. Results show that PuO{sub 2}, Pu{sub 2}O{sub 3}, PuH{sub 2.7}, and Pu have definitive Auger line-shapes. These data were used to produce a chemical state (Wagner) plot for select plutonium oxides. This Wagner plot allowed us to distinguish between the trivalent hydride and the trivalent oxide, which cannot be differentiated by the Pu 4f binding energy alone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DISTRIBUTION OF ACTINIDES BETWEEN THE AQUEOUS AND ORGANIC PHASES IN THE TALSPEAK PROCESS

One objective of the US Department of Energy's Office of Nuclear Energy (DOE-NE) is the development of sustainable nuclear fuel cycles which improve uranium resource utilization, maximize energy generation, minimize waste generation, improve safety, and complement institutional measures limiting proliferation risks. Activities in progress which support this objective include the development of advanced separation technologies to recover the actinides from used nuclear fuels. With the increased interest in the development of technology to allow closure of the nuclear fuel cycle, the TALSPEAK process is being considered for the separation of Am and Cm from the lanthanide fission products in a next generation reprocessing plant. However, at this time, the level of understanding associated with the chemistry and the control of the process variables is not acceptable for deployment of the process on an industrial scale. To address this issue, DOE-NE is supporting basic scientific studies focused on the TALSPEAK process through its Fuel Cycle Research and Development (R&D) program. One aspect of these studies is an experimental program at the Savannah River National Laboratory (SRNL) in which temperature-dependent distribution coefficients for the extraction of actinide elements in the TALSPEAK process were measured. The data were subsequently used to calculate conditional enthalpies and entropies of extraction by van't Hoff analysis to better understand the thermodynamic driving forces for the TALSPEAK process. In the SRNL studies, the distribution of Pu(III) in the TALSPEAK process was of particular interest. A small amount of Pu(III) would be present in the feed due to process losses and valence adjustment in prior recovery operations. Actinide elements such as Np and Pu have multiple stable oxidation states in aqueous solutions; therefore the oxidation state for these elements must be controlled in the TALSPEAK process, as the extraction chemistry is dependent upon the actinide's valence. Since our plans included the measurement of Pu(III) distribution coefficients using a Np(V) solution containing small amounts of {sup 238}Pu, it was necessary to demonstrate that the desired oxidation states of Np and Pu are produced and could be stabilized in a buffered lactate solution containing diethylenetriaminepentaacetic (DTPA). The stability of Np(V) and Pu(III) in lactic acid/DTPA solutions was evaluated by ultraviolet-visible (UV-vis) spectroscopy. To perform the evaluation, Np and Pu were added to solutions containing either hydroxylamine nitrate (HAN) or ferrous sulfamate (FS) as the reductant and nominally 1.5 M lactic acid/0.05 M DTPA. The pH of the solution was subsequently adjusted to nominally 2.8 as would be performed in the TALSPEAK process. In the valence adjustment study, we found that it was necessary to reduce Pu to Pu(III) prior to combining with the lactic acid and DTPA. The Pu reduction was performed using either HAN or FS. When FS was used, Np was reduced to Np(IV). The spectroscopic studies showed that Np(V) and Pu(III) are not stable in lactic acid/DTPA solutions. The stability of Np(IV)- and Pu(IV)-DTPA complexes are much greater than the stability of the Np(V)- and Pu(III)-DTPA complexes, and as a result, Np is slowly reduced to Np(IV) and Pu is slowly oxidized to Pu(IV) due to the reduced activity of the more stable complexes. When Np(V) was added to a solution containing a 1.5 M lactic acid/ammonium lactate buffer and 0.05 M DTPA, approximately 50% of the Np was reduced to Np(IV) in the first day. The fraction of Np(V) in the solution continued to diminish with time and was essentially reduced to Np(IV) after one week. When Pu(III) was added to a lactic acid/DTPA solution of the same composition, the spectrum recorded following at least two days after preparation of the solution continued to show some sign of Pu(III). The Pu(III) was completely oxidized to Pu(IV) after 3-4 days. The UV-vis spectroscopy demonstrated that Np(V) and Pu(III) were the predominate valences in the lactic acid/DTPA solution for the better part of a day following solution preparation. Based on these results, we chose to initially add HAN to the actinide tracer solution prepared for the distribution coefficient measurements (to produce Pu(III)) prior to combining with lactic acid and DTPA. The distribution coefficient measurements were expected to be complete in 2-3 h; therefore, Np(V) and Pu(III) valences would predominate in the solution during this time. Prior to adding the HAN to the actinide tracers, we added sufficient Am(III) activity to allow the measurement of distribution coefficients during the extraction experiments. Protactinium (V) distribution coefficients were also measured using the activity which was in secular equilibrium with the {sup 237}Np. The actinide distribution coefficients were measured at pH 2.8 and 3.5 and covered a range of temperatures from nominally 20 to 60 C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effective Electrostatic Interactions Between Two Overall Neutral Surfaces with Quenched Charge Heterogeneity Over Atomic Length Scale

Using Monte Carlo results as a reference, a classical density functional theory (CDFT) is shown to reliably predict the forces between two heterogeneously charged surfaces immersed in an electrolyte solution, whereas the Poisson–Boltzmann (PB) theory is demonstrated to deteriorate obviously for the same system even if the system parameters considered fall within the validity range of the PB theory in the homogeneously charged surfaces. By applying the tested CDFT, we study the effective electrostatic potential of mean force (EPMF) between two face–face planar and hard surfaces of zero net charge on which positive and negative charges are separated and considered to present as discontinuous spots on the inside edges of the two surfaces. Main conclusions are summarized as follows: (i) strength of the EPMF in the surface charge separation case is very sensitively and positively correlated with the surface charge separation level and valency of the salt ion. Particularly, the charge separation level and the salt ion valency have a synergistic effect, which makes high limit of the EPMF strength in the surface charge separation case significantly go beyond that of the ideal homogeneously charged surface counterpart at average surface charge density similar to the average surface positive or negative charge density in the charge separation case. (ii) The surface charge distribution patterns mainly influence sign of the EPMF: symmetrical and asymmetrical patterns induce repulsive and attractive (at small distances) EPMF, respectively; but with low valency salt ions and low charge separation level the opposite may be the case. With simultaneous presence of both higher valency cation and anion, the EPMF can be repulsive at intermediate distances for asymmetrical patterns. (iii) Salt ion size has a significant impact, which makes the EPMF tend to become more and more repulsive with the ion diameter regardless of the surface charge distribution patterns and the valency of the salt ion; whereas if the 1:1 type electrolyte and the symmetrical patterns are considered, then the opposite may be the case. All of these findings can be explained self-consistently from several perspectives: an excess adsorption of the salt ions (induced by the surface charge separation) serving to raise the osmotic pressure between the plates, configuration fine-tuning in the thinner ion adsorption layer driven by the energy decrease principle, direct Coulombic interactions operating between charged objects on the two face-to-face plates involved, and net charge strength in the ion adsorption layer responsible for the net electrostatic repulsion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structure, magnetism and transport properties of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}

Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} were obtained from a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a Ni–In flux. The initial phase, CeRu{sub 2}Al{sub 2}B, does not recrystallize, instead, crystals of a new phase, Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}, could be isolated once the flux was removed. The title compound crystallizes in the tetragonal space group P4/nmm (No. 129) with a=1139.02(8), c=801.68(6) pm (c/a=0.70) in the Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} structure type. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 µΩ cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. - Graphical abstract: Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}A{sub l4.1}B{sub 10} were obtained using a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a Ni–In flux. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 μΩ cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. Display Omitted - Highlights: • Flux synthesis of high quality single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} is presented along with the crystal structure, magnetic and transport properties. • The compound is isostructural to Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} but is first of this structure type showing mixed occupancies of d-elements. • This is an intermetallic phase with Ce in either the 4+ or an intermediate valence state. • The fact that this structure with mixed occupied transition metal sites exists suggests that more compounds of this type should be accessible and the physical properties tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and magnetic properties of Li{sub 0.44}Eu{sub 3}[B{sub 3}N{sub 6}]

Li{sub 0.44}Eu{sub 3}[B{sub 3}N{sub 6}] was synthesized from the metathesis reaction of Li{sub 3}[BN{sub 2}] and EuCl{sub 3} at 850 °C. Li{sub 0.44}Eu{sub 3}[B{sub 3}N{sub 6}] crystallizes in the trigonal space group R3{sup ¯}c (No. 167) with a=12.0225(2) Å, c=6.8556(2) Å and Z=6. In the crystal structure, isolated, planar cyclic [B{sub 3}N{sub 6}]{sup 9−} units are charge-balanced by the mixed-valence Eu{sup 3+}/Eu{sup 2+} and Li{sup +} cations. Li{sup +} occupies partially (44%) the Wyckoff site 6b and is sandwiched between the [B{sub 3}N{sub 6}]{sup 9−} anions. Mössbauer spectroscopy results show the resonance lines of Eu{sup 2+} and Eu{sup 3+}, respectively, indicating the heterogeneous mixed valency of the Eu atoms. X-Band ESR investigations between 5 and 300 K reveal an intense signal over the whole temperature range originating from Eu{sup 2+}. Magnetic susceptibility measurements indicate a Curie–Weiss behavior with an experimental effective magnetic moment of μ{sub eff}=8.28 μ{sub B} per formula unit. - Graphical abstract: Single crystals of Li{sub 0.44}Eu{sub 3}[B{sub 3}N{sub 6}] was obtained from the metathesis reaction of Li{sub 3}[BN{sub 2}] and EuCl{sub 3.}{sup 151}Eu Mössbauer, ESR and magnetic susceptibility measurements reveal the heterogeneous mixed valency of the Eu atoms. Display Omitted - Highlights: • Single crystals of Li{sub 0.44}Eu{sub 3}[B{sub 3}N{sub 6}] was obtained from the metathesis reaction of Li{sub 3}[BN{sub 2}] and EuCl{sub 3} at 850 °C. • Crystal structure is built up by isolated, planar cyclic [B{sub 3}N{sub 6}]{sup 9−} units which are surrounded by mixed valence Eu{sup 3+}/Eu{sup 2+}. • Li{sup +} occupies partially (44%) the site 6b and is sandwiched between the [B{sub 3}N{sub 6}]{sup 9−} anions. • The {sup 151}Eu Mössbauer spectroscopy, electron spin resonance spectroscopy and magnetic susceptibility measurements confirm the heterogeneous mixed valency of Eu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Pd substitution on the thermoelectric and electronic properties of delafossite Cu{sub 1−x}Pd{sub x}FeO{sub 2} (x=0.01, 0.03 and 0.05)

Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} (x=0.01, 0.03 and 005) delafossite was prepared by solid state reactions and was calcined/sintered at 1050 °C. The effect of Pd{sup 2+} substitution for the Cu{sup 1+} sites on the thermoelectric and electronic properties of Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} were investigated. The crystal structure, oxygen decomposition, thermoelectric and electronic properties were characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy (XPS), Seebeck coefficient, electrical conductivity and thermal conductivity measurements. The characterization showed that Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} formed a hexagonal delafossite structure with R3−m symmetry. The existence of Pd{sup 2+}, Cu{sup 1+}, Cu{sup 2+}, Fe{sup 3+}, Fe{sup 4+} and O was revealed from the XPS results. Confirmation of Pd{sup 2+} substitution for the Cu{sup 1+} sites occurred by increasing the c-axis in the lattice parameter with a Pd content. The O content intercalated at the center of the triangular Cu acted as a support to produce Cu{sup 2+} ions and was reduced with an increasing Pd content. The mixed valencies of Cu{sup 1+}/Cu{sup 2+} and Cu{sup 1+}/Pd{sup 2+} in the Cu layer changed the electrical conductivity and the Fe{sup 3+}/Fe{sup 4+} mixed valencies in the FeO{sub 6} layer caused the Seebeck coefficient to increase. Both the electrical conductivity and Seebeck coefficient for Pd contents of x=0.01 and 0.03 were higher than that of non-doped CuFeO{sub 2}. The low thermal conductivity of Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} resulted from the substitution of Pd, which has a large atomic mass, into structure. The Jonker plot indicated that the electronic properties displayed a degenerate density of states and that Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} was a semiconductor. A high ZT value of 0.055 was obtained for a Pd content of 0.03 at 950 K. The Pd{sup 2+} substitution for the Cu{sup 1+} sites influenced the thermoelectric and electronic properties of the delafossite Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} samples. - Graphical abstract: Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} (x=0.01, 0.03 and 005) delafossite was prepared by solid state reactions. The characterization showed that Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} formed a hexagonal delafossite structure with R3−m symmetry. The existence of Pd{sup 2+}, Cu{sup 1+}, Cu{sup 2+}, Fe{sup 3+}, Fe{sup 4+} and O was revealed from the XPS results. The O content intercalated at the center of the triangular Cu acted as a support to produce Cu{sup 2+} ions and was reduced with an increasing Pd content. The mixed valencies of Cu{sup 1+}/Cu{sup 2+} and Cu{sup 1+}/Pd{sup 2+} in the Cu layer changed the electrical conductivity and the Fe{sup 3+}/Fe{sup 4+} mixed valencies in the FeO{sub 6} layer caused the Seebeck coefficient to increase. Both the electrical conductivity and Seebeck coefficient for Pd contents of x=0.01 and 0.03 were higher than that of non-doped CuFeO{sub 2}. The low thermal conductivity of Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} resulted from the substitution of Pd, which has a large atomic mass, into structure. A high ZT value of 0.055 was obtained for a Pd content of 0.03 at 950 K. The Pd{sup 2+} substitution for the Cu{sup 1+} sites influenced the thermoelectric and electronic properties of the delafossite Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} samples. - Highlights: • New compound of Cu{sub 1−x}Pd{sub x}FeO{sub 2} (x=0.01, 0.03 and 0.05) forms phase of delafossite. • The compound displays p-type thermoelectric materials. • The Pd-substituted for Cu{sup 1+} sites forms Pd{sup 2+}. • Mixed valencies of Cu{sup +}/Cu{sup 2+}, Cu{sup +}/Pd{sup 2+} and Fe{sup 3+}/Fe{sup 4+} appear in the compound. • Large atomic mass of Pd-substituted causes low thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low Thermal Gradient Czochralski growth of large CdWO{sub 4} crystals and electronic properties of (010) cleaved surface

The crystal growth of large high-quality inclusion-free CdWO4 crystals, 110 mm in diameter and mass up to 20 kg, has been carried out by the Low Thermal Gradient Czochralski (LTG Cz) technique. The high-purity CdWO{sub 4}(010) surface has been prepared by cleavage and high structural quality of the surface has been verified by RHEED, revealing a system of Kikuchi lines. The chemical state and electronic structure of the surface have been studied using X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES). The total and partial densities of states of the CdWO{sub 4} tungstate were calculated employing the first-principles full potential linearized augmented plane wave (FP-LAPW) method. The results indicate that the principal contributors to the valence band of CdWO{sub 4} are the Cd 4d, W 5d and O 2p states which contribute mainly at the bottom, in the central portion and at the top of the valence band, respectively, with also significant contributions of the mentioned states throughout the whole CdWO{sub 4} valence-band region. With respect to the occupation of the O 2p states, the results of the FP-LAPW calculations are confirmed by comparison on a common energy scale of the XPS valence-band spectrum and the XES band representing the energy distribution of the O 2p states in this compound. Additionally, the FP-LAPW data allow us to conclude that the CdWO{sub 4} tungstate is a non-direct semiconductor. - Highlights: • Large high-quality CdWO{sub 4} crystals, up to 115 mm in diameter and mass up to 20 kg, have been grown. • The high-purity cleaved CdWO{sub 4}(010) surface has been studied by the XPS and XES methods. • The principal contributors to the CdWO{sub 4} valence band are the Cd 4d, W 5d and O 2p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural, electronic and linear electro-optical features of new quaternary Ag{sub 2}Ga{sub 2}SiS{sub 6} compound

For the first time phase equilibria and phase diagram of the AgGaS{sub 2}–SiS{sub 2} system were successfully explored by differential thermal and X-ray phase analysis methods. Crystal structure of low-temperature (LT) modification of Ag{sub 2}Ga{sub 2}SiS{sub 6} (LÐ Ñž- Ag{sub 2}Ga{sub 2}SiS{sub 6}) was studied by X-ray powder method and it belongs to tetragonal space group I-42d, with unit cell parameters a=5.7164(4) Å, c=9.8023(7) Å, V=320.32(7) Å{sup 3}. Additional details regarding the crystal structure exploration are available at the web page Fachinformationszentrum Karlsruhe. X-ray photoelectron core-level and valence-band spectra were measured for pristine LÐ Ñž- Ag{sub 2}Ga{sub 2}SiS{sub 6} crystal surface. In addition, the X-ray photoelectron valence-band spectrum of LÐ Ñž-Ag{sub 2}Ga{sub 2}SiS{sub 6} was matched on a common energy scale with the X-ray emission S Kβ{sub 1,3} and Ga Kβ{sub 2} bands, which give information on the energy distribution of the S 3p and Ga 4p states, respectively. The presented X-ray spectroscopy results indicate that the valence S p and Ga p atomic states contribute mainly to the upper and central parts of the valence band of LÐ Ñž-Ag{sub 2}Ga{sub 2}SiS{sub 6}, respectively, with a less significant contribution also to other valence-band regions. Band gap energy was estimated by measuring the quantum energy in the spectral range of the fundamental absorption. We have found that energy gap Eg is equal to 2.35 eV at 300 K. LT-Ag{sub 2}Ga{sub 2}SiS{sub 6} is a photosensitive material and reveals two spectral maxima on the curve of spectral photoconductivity spectra at λ{sub max1} =590 nm and λ{sub max2} =860 nm. Additionally, linear electro-optical effect of LT-Ag{sub 2}Ga{sub 2}SiS{sub 6} for the wavelengths of a cw He-Ne laser at 1150 nm was explored. - Graphical abstract: Manuscript present the technology of growth and investigation of properties a new quaternary compound Ag{sub 2}Ga{sub 2}SiS{sub 6} including the detailed study of the phase equilibria in the AgGaS{sub 2}–SiS{sub 2} system to determine the physico-chemical conditions of its formation. We examined crystal structure of the compound by X-ray powder method, its electronic structure by XPS method. Finally we have found these crystals like promising material for nonlinear optical, electrooptical and piezoelectric applications. - Highlights: • Phase diagram of the AgGaS{sub 2}–SiS{sub 2} system was successfully described at first time. • Crystal Ag{sub 2}Ga{sub 2}SiS{sub 6} was grown and its structure was determined. • Electronic structure and chemical bonding of the Ag{sub 2}Ga{sub 2}SiS{sub 6} crystal were examined by. • X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES) methods. • Optical and photoelectrical properties were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comprehensive Experimental and Computational Spectroscopic Study of Hexacyanoferrate Complexes in Water: From Infrared to X-ray Wavelengths

We present a joint experimental and computational study of the hexacyanoferrate aqueous complexes at equilibrium in the 250 meV to 7.15 keV regime. The experiments include the vibrational spectroscopy of the cyanide ligands, the valence electronic absorption spectra and Fe 1s core hole spectra using X-ray absorption and emission techniques. These experiments are accompanied by density functional theory (DFT) based quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) simulations and spectroscopy calculations of the experiments spanning the IR to X-ray wavelengths. Our simulations, including explicit solvent effects, across this large energy window allows for a systematic comparison of vibrational, valence electronic and core-level spectra. The analysis reveals how the local solvation environment influences the geometric and electronic structure and impacts the line shape and intensity of the observed spectral features in the infrared, optical and X-ray wavelengths.

Ross, Matthew↗

Experimental and Theoretical Study of the Electronic Structures of Lanthanide Indium Perovskites LnInO 3

Ternary lanthanide indium oxides LnInO 3 (Ln = La, Pr, Nd, Sm) were synthesized by high-temperature solid-state reaction and characterized by Xray powder diffraction. Rietveld refinement of the powder patterns showed the LnInO 3 materials to be orthorhombic perovskites belonging to the space group Pnma, based on almost-regular InO 6 octahedra and highly distorted LnO 12 polyhedra. Experimental structural data were compared with results from density functional theory (DFT) calculations employing a hybrid Hamiltonian. Valence region X-ray photoelectron and K-shell X-ray emission and absorption spectra of the LnInO 3 compounds were simulated with the aid of the DFT calculations. Photoionization of lanthanide 4f orbitals gives rise to a complex final-state multiplet structure in the valence region for the 4f n compounds PrInO 3 , NdInO 3 , and SmInO 3 , and the overall photoemission spectral profiles were shown to be a superposition of final-state 4f n-1 terms onto the cross-section weighted partial densities of states from the other orbitals. The occupied 4f states are stabilized in moving across the series Pr-Nd-Sm. Band gaps were measured using diffuse reflectance spectroscopy. These results demonstrated that the band gap of LaInO 3 is 4.32 eV, in agreement with DFT calculations. This is significantly larger than a band gap of 2.2 eV first proposed in 1967 and based on the idea that In 4d states lie above the top of the O 2p valence band. However, both DFT and X-ray spectroscopy show that In 4d is a shallow core level located well below the bottom of the valence band. Band gaps greater than 4 eV were observed for NdInO 3 and SmInO 3 , but a lower gap of 3.6 eV for PrInO 3 was shown to arise from the occupied Pr 4f states lying above the main O 2p valence band.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible Interfacial Charge Transfer and Delayed Emission in InP/ZnSe/ZnS Quantum Dots with Hexadecanethiol

The results in this paper show that holes are rapidly and reversibly transferred from red-emitting InP/ZnSe/ZnS quantum dots (QDs) to adsorbed hexadecanethiol (HDT) forming an equilibrium between the thiols and the QD valence band. Photoexcitation results in populations of holes in the valence band and in slightly higher-energy shell-localized traps. Trap to valence band hole tunneling results in a photoluminescence risetime having time constants varying from 300 ps to 2 ns. The presence of adsorbed HDT eliminates the slower risetime component, indicating that hole transfer from the shell-localized traps that are closest to the particle surface efficiently competes with tunneling to the QD core. This shows that the interfacial charge transfer equilibrium is established in less than 2 ns. The population of the shell-localized traps corresponds to a reservoir of hole states that eventually tunnel to the core-localized valence band, resulting in delayed emission. The amount of delayed emission increases rapidly with ZnSe shell thickness and is slightly blue-shifted from the prompt photoluminescence. We propose an energetic model in which the HDT/valence band equilibrium is affected by the extent of valence band quantum confinement and an electric field produced by core–shell interfacial dipoles. Furthermore, this model explains the core size, shell thickness, and photoluminescence (PL) wavelength dependence of this equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand Field Strength Mediates Electron Delocalization in Octahedral [( H L) 2 Fe 6 (L') m ] n + Clusters

To assess the impact of terminal ligand binding on a variety of cluster properties (redox delocalization, ground-state stabilization, and breadth of redox state accessibility), we prepared three electron-transfer series based on the hexanuclear iron cluster [( H L) 2 Fe 6 (L') m ] n+ in which the terminal ligand field strength was modulated from weak to strong (L' = DMF, MeCN, CN). The extent of intracore M–M interactions is gauged by M–M distances, spin ground state persistence, and preference for mixed-valence states as determined by electrochemical comproportionation constants. Coordination of DMF to the [( H L) 2 Fe 6 ] core leads to weaker Fe–Fe interactions, as manifested by the observation of ground states populated only at lower temperatures (<100 K) and by the greater evidence of valence trapping within the mixed-valence states. Comproportionation constants determined electrochemically (K c = 10 4 –10 8 ) indicate that the redox series exhibits electronic delocalization (class II–III), yet no intervalence charge transfer (IVCT) bands are observable in the near-IR spectra. Ligation of the stronger σ donor acetonitrile results in stabilization of spin ground states to higher temperatures (~300 K) and a high degree of valence delocalization (K c = 10 2 –10 8 ) with observable IVCT bands. Finally, the anionic cyanide-bound series reveals the highest degree of valence delocalization with the most intense IVCT bands (K c = 10 12 –10 20 ) and spin ground state population beyond room temperature. Lastly, across the series, at a given formal oxidation level, the capping ligand on the hexairon cluster dictates the overall properties of the aggregate, modulating the redox delocalization and the persistence of the intracore coupling of the metal sites.

36 MATERIALS SCIENCE↗

Propagation topography of redox phase transformations in heterogeneous layered oxide cathode materials

Redox phase transformations are relevant to a number of metrics pertaining to the electrochemical performance of batteries. These phase transformations deviate from and are more complicated than the conventional theory of phase nucleation and propagation, owing to simultaneous changes of cationic and anionic valence states as well as the polycrystalline nature of battery materials. Herein, we propose an integrative approach of mapping valence states and constructing chemical topographies to investigate the redox phase transformation in polycrystalline layered oxide cathode materials under thermal abuse conditions. We discover that, in addition to the three-dimensional heterogeneous phase transformation, there is a mesoscale evolution of local valence curvatures in valence state topographies. The relative probability of negative and positive local valence curvatures alternates during the layered-to-spinel/rocksalt phase transformation. In conclusion, the implementation of our method can potentially provide a universal approach to study phase transformation behaviors in battery materials and beyond.

25 ENERGY STORAGE↗

A coarse-grained simulation model for colloidal self-assembly via explicit mobile binders

Colloidal particles with mobile binding molecules constitute a powerful platform for probing the physics of self-assembly. Binding molecules are free to diffuse and rearrange on the surface, giving rise to spontaneous control over the number of droplet–droplet bonds, i.e., valence, as a function of the concentration of binders. This type of valence control has been realized experimentally by tuning the interaction strength between DNA-coated emulsion droplets. Optimizing for valence two yields droplet polymer chains, termed ‘colloidomers’, which have recently been used to probe the physics of folding. To understand the underlying self-assembly mechanisms, here we present a coarse-grained molecular dynamics (CGMD) model to study the self-assembly of this class of systems using explicit representations of mobile binding sites. Further, we explore how valence of assembled structures can be tuned through kinetic control in the strong binding limit. More specifically, we optimize experimental control parameters to obtain the highest yield of long linear colloidomer chains. Subsequently tuning the dynamics of binding and unbinding via a temperature-dependent model allows us to observe a heptamer chain collapse into all possible rigid structures, in good agreement with recent folding experiments. Our CGMD platform and dynamic bonding model (implemented as an open-source custom plugin to HOOMD-Blue) reveal the molecular features governing the binding patch size and valence control, and opens the study of pathways in colloidomer folding. This model can therefore guide programmable design in experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new generation of effective core potentials for correlated calculations

Here, we outline ideas on desired properties for a new generation of effective core potentials (ECPs) that will allow valence-only calculations to reach the full potential offered by recent advances in many-body wave function methods. The key improvements include consistent use of correlated methods throughout ECP constructions and improved transferability as required for an accurate description of molecular systems over a range of geometries. The guiding principle is the isospectrality of all-electron and ECP Hamiltonians for a subset of valence states. We illustrate these concepts on a few first- and second-row atoms (B, C, N, O, S), and we obtain higher accuracy in transferability than previous constructions while using semi-local ECPs with a small number of parameters. In addition, the constructed ECPs enable many-body calculations of valence properties with higher (or same) accuracy than their all-electron counterparts with uncorrelated cores. This implies that the ECPs include also some of the impacts of core-core and core-valence correlations on valence properties. The results open further prospects for ECP improvements and refinements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗