Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Heating of the interstellar medium by supernova remnants

Models for the mechanisms active during supernova (SN) heating of surrounding regions are examined. SNs heat both the matrix material and material in the nearby interstellar medium, and also accelerate cosmic rays with shock waves. Fountain and wind models vary according to the SN power and mass acquisition rate. Additionally, a warm intercloud medium may be fed by returning fountain material and stellar mass loss. The thermal wind temperature varies with the number of solar massess heated, although remnants have been observed to vanish in the LMC when more than 100 solar masses were heated. The possibility that the solar system is inside a remnant that produces the observed soft X-ray background is considered.

Cox, D. P.↗

Superthermal ionospheric outflows

In recent years observations have shown that the terrestrial ionosphere serves as a significant source of the hot plasma in the magnetosphere. These findings imply that cold plasma flows upward to great altitudes and at some point along the way gains energies much larger than typical ionospheric values. The present investigation is mainly concerned with observations of ionospheric outflows at energies higher than those predicted by ambipolar wind models but lower than those associated with keV auroral ion acceleration, giving particular attention to the energy range from a few to a few hundred electron volts. The ion flows in the energy range intermediate between polar wind and keV auroral ion beams are called superthermal ion outflows. It is shown that recent observations of superthermal ion outflows from the terrestrial ionosphere are related to theoretical models of the topside ionosphere.

Moore, T. E.↗

Distributed Wind Representation in Modeling and Simulation Tools: An Assessment of Existing Tools

PNNL evaluated the inclusion of wind in distributed energy resource modeling and simulation tools. Tools were assessed based on a survey of publicly available and readily accessible information. While the authors have made a good faith effort to understand these tools, PNNL does not know the intentions of the developers and acknowledges that some tool capabilities or features may not have been accurately captured in this assessment. This evaluation informs an ongoing effort by PNNL to modernize existing tools both directly by working with developers of some tools and indirectly by providing best practices on how different types of tools could enhance certain modeling features to improve distributed wind’s representation and valuation.

17 WIND ENERGY↗

Dynamic Model Development of a Wind Power Plant Using Neural Net Method to Forecast Wind Power Output (CRADA Final Report)

This project is intended to model wind power plant based on monitored data at the wind power plant. This project will promote the university research in Renewable Energy area and trains the future highly qualified engineers. The dynamic model will be based on neural net model with the input from the two met towers (12 inputs), and the number of turbines in operation (one input). The overall input will be 13 inputs to drive the simulations. The output power at the point of interconnection will be used to tune the neural net weight coefficients. Two neural net concepts will be investigated (the back propagation neural net and the dynamic recurrent neural net with feedback).

17 WIND ENERGY↗

Cruise noise of the SR-2 propeller model in a wind tunnel

Noise data on the SR-2 model propeller were taken in the NASA Lewis Research Center 8- by 6-Foot Wind Tunnel. The maximum blade passing tone rises with increasing helical tip Mach number to a peak level at a helical tip Mach number of about 1.05; then it remains the same or decreases at higher helical tip Mach numbers. This behavior, which has been observed with other propeller models, points to the possibility of using higher propeller tip speeds to limit airplane cabin noise while maintaining high flight speed and efficiency. Noise comparisons of the straight-blade SR-2 propeller and the swept-blade SR-7A propeller showed that the tailored sweep of the SR-7A appears to be the cause of both lower peak noise levels and a slower noise increase with increasing helical tip Mach number.

Dittmar, James H.↗

Synthetic Absorption Lines from Simulations of Multiphase Gas in Galactic Winds

Supernova-driven galactic winds are multiphase streams of gas that are often observed flowing at a range of velocities out of star-forming regions in galaxies. In this study, we use high-resolution 3D simulations of multiphase galactic winds modeled with the hydrodynamics code Cholla to investigate the connection between numerical studies and observations. Using a simulated interaction between a hot $T$ ~ 10 4 K supernova-driven wind and a cool $T$ ~ 10 7 K cloud of interstellar material, we create mock observables, including the optical depth ($\tau$) and covering fraction ($C$ $f$ ) of six commonly observed ions (Si II , C II , Si IV , C IV , N V , and O VI ) as a function of gas velocity. We compare our mock observables to surveys of galactic winds in the literature, finding good agreement with velocities and profiles of the low ions. We then compute "empirical" values for the optical depth and covering fraction following observational techniques and compare them to the values calculated directly from the simulation data. We find that the empirically computed values tend to underestimate the "true" value of $\tau$ for ions with high optical depth and overestimate the "true" value of $\tau$ for ions with low optical depth relative to the simulated data. In conclusion, the empirically estimated covering fractions match our direct calculations very well for the low-ionization ions; for the high-ionization ions, the empirical covering fractions underestimate the directly computed values by up to ~40%.

79 ASTRONOMY AND ASTROPHYSICS↗

Line-of-sight effects on spectroscopic measurements in the inner solar wind region

The effect of the integration along the line of sight on the spectral line profiles of the resonantly scattered Lyman alpha radiation emitted by low-density coronal holes at heights above 1.5 Rs from sun center is investigated. It is shown how the spectral lines from this region are influenced by the Lyman alpha emission from surrounding regions with higher densities. The coronal hole and the surrounding areas are described by a two-fluid solar wind model. It is shown that the line-of-sight effects can be important for the interpretation of the Lyman alpha spectral line measurements in the outer corona and inner solar wind.

Esser, Ruth↗

MAGNETIC COMPLEXITY AS AN EXPLANATION FOR BIMODAL ROTATION POPULATIONS AMONG YOUNG STARS

Observations of young open clusters have revealed a bimodal distribution of fast and slower rotation rates that has proven difficult to explain with predictive models of spin down that depend on rotation rates alone. The Metastable Dynamo Model proposed recently by Brown, employing a stochastic transition probability from slow to more rapid spin down regimes, appears to be more successful but lacks a physical basis for such duality. Using detailed 3D MHD wind models computed for idealized multipole magnetic fields, we show that surface magnetic field complexity can provide this basis. Both mass and angular momentum losses decline sharply with increasing field complexity. Combined with observation evidence for complex field morphologies in magnetically active stars, our results support a picture in which young, rapid rotators lose angular momentum in an inefficient way because of field complexity. During this slow spin-down phase, magnetic complexity is eroded, precipitating a rapid transition from weak to strong wind coupling.

79 ASTRONOMY AND ASTROPHYSICS↗

THE r-PROCESS IN PROTO-NEUTRON-STAR WIND REVISITED

We examine the r-process in the neutrino-driven proto-neutron-star (PNS) wind of core-collapse supernovae in light of the recent findings of massive neutron stars in binaries as well as of an indication of neutron-richness in the PNS ejecta because of the nucleon potential corrections on neutrino opacities. To this end, a spherically symmetric, general relativistic, steady-state wind model is applied for a wide range of PNS masses between 1.2 M{sub Sun} and 2.4 M{sub Sun} with the latter reaching the causality limit. Nucleosynthesis calculations with these PNS models are performed by assuming a time evolution of electron fraction with its minimal value of Y{sub e} = 0.4, which mimics recent hydrodynamical results. The fundamental nucleosynthetic aspect of the PNS wind is found to be the production of Sr, Y, and Zr in quasi-equilibrium and of the elements with A Almost-Equal-To 90-110 by a weak r-process, which can be an explanation for the abundance signatures in r-process-poor Galactic halo stars. PNSs more massive than 2.0 M{sub Sun} can eject heavy r-process elements, however, with substantially smaller amount than what is needed to account for the solar content. PNS winds can be thus the major origin of light trans-iron elements but no more than 10% of those heavier than A {approx} 110, although they may be the sources of the low-level abundances of Sr and Ba found in numerous metal-poor stars if the maximum mass of PNSs exceeds 2.0 M{sub Sun }.

79 ASTRONOMY AND ASTROPHYSICS↗

CORONAL PLUMES IN THE FAST SOLAR WIND

The expansion of a coronal hole filled with a discrete number of higher density coronal plumes is simulated using a time-dependent two-dimensional code. A solar wind model including an exponential coronal heating function and a flux of Alfven waves propagating both inside and outside the structures is taken as a basic state. Different plasma plume profiles are obtained by using different scale heights for the heating rates. Remote sensing and solar wind in situ observations are used to constrain the parameter range of the study. Time dependence due to plume ignition and disappearance is also discussed. Velocity differences of the order of {approx}50 km s{sup -1}, such as those found in microstreams in the high-speed solar wind, may be easily explained by slightly different heat deposition profiles in different plumes. Statistical pressure balance in the fast wind data may be masked by the large variety of body and surface waves which the higher density filaments may carry, so the absence of pressure balance in the microstreams should not rule out their interpretation as the extension of coronal plumes into interplanetary space. Mixing of plume-interplume material via the Kelvin-Helmholtz instability seems to be possible within the parameter ranges of the models defined here, only at large distances from the Sun, beyond 0.2-0.3 AU. Plasma and composition measurements in the inner heliosphere, such as those which will become available with Solar Orbiter and Solar Probe Plus, should therefore definitely be able to identify plume remnants in the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Review of Wind–Wave Coupling Models for Large-Eddy Simulation of the Marine Atmospheric Boundary Layer

Abstract We present a review of existing wind–wave coupling models and parameterizations used for large-eddy simulation of the marine atmospheric boundary layer. The models are classified into two main categories: (i) the wave-phase-averaged, sea surface–roughness models and (ii) the wave-phase-resolved models. Both categories are discussed from their implementation, validity, and computational efficiency viewpoints, with emphasis given on their applicability in offshore wind energy problems. In addition to the various models discussed, a review of laboratory-scale and field-measurement databases is presented thereafter. The majority of the presented data have been gathered over many decades of studying air–sea interaction phenomena, with the most recent ones compiled to reflect an offshore wind energy perspective. Both provide valuable data for model validation. We also discuss the modeling knowledge gaps and computational challenges ahead.

54 ENVIRONMENTAL SCIENCES↗

Techno-Economic Wind Blade Manufacturing Model to Identify Opportunities for Cost Improvements Phase II IACMI Project 4.6/4.8

In IACMI Project 4.6 and IACMI Project 4.8, an Excel-based Techno-Economic Model (TEM) of the manufacturing process for composite wind turbine blades and a DELMIA Factory Flow Simulation of a generic wind blade manufacturing facility was developed. Together, these two tools provide a combined economic modeling capability that accounts for the material, labor, overhead and full-lifecycle operating costs associated with wind blade manufacturing as well as the impact of process flow and factory layout on overall manufacturing efficiency. The tools provide a novel means of detailed comparative analysis of the economic feasibility of proposed technologies and process changes for blade manufacturing. The modeling tools were developed with close support from members of industry and visits to multiple blade manufacturing facilities. With industry oversight, a detailed generalized manufacturing process plan and facility layout were developed with manufacturing parameters, material costs and economic factors based on historical data. Dassault Systèmes and the University of Texas at Dallas (UTD) contributed to the development of the Techno-Economic Model by providing macros to enable the generation of Bill of Material (BOM) data from a 3D blade design in either CATIA or NuMAD format, respectively. The TEM was built with the capability to directly import a Bill of Materials for economic analysis, and with the addition of the macros provided by Dassault and UTD, the TEM can directly import blade designs from both CATIA and NuMAD file formats. The modeling tools developed in Project 4.6 were used to investigate four wind blade manufacturing concepts in detail and select one to explore with laboratory-scale experimentation in Project 4.8. The four manufacturing concepts that were investigated were down-selected by the full project team from a larger list of concepts. The selections were made based on a number of criteria ranking viability and level of interest for each concept. The ‘One-Step Close’ manufacturing concept was ultimately selected for investigation in Project 4.8 and the demonstration was performed at the NREL CoMET facility. The TPI advanced manufacturing facility in Warren, RI contributed the production of several prototype components, the designs for which were developed by Janicki Industries. The demonstration project provided clear indication of the viability of the One-Step Close manufacturing concept for blade manufacturing and good validation of the Techno-Economic Model’s prediction of its economic impact.

17 WIND ENERGY↗

Coronal Plumes in the Fast Solar Wind

The expansion of a coronal hole filled with a discrete number of higher density coronal plumes is simulated using a time-dependent two-dimensional code. A solar wind model including an exponential coronal heating function and a flux of Alfven waves propagating both inside and outside the structures is taken as a basic state. Different plasma plume profiles are obtained by using different scale heights for the heating rates. Remote sensing and solar wind in situ observations are used to constrain the parameter range of the study. Time dependence due to plume ignition and disappearance is also discussed. Velocity differences of the order of approximately 50 km/s, such as those found in microstreams in the high-speed solar wind, may be easily explained by slightly different heat deposition profiles in different plumes. Statistical pressure balance in the fast wind data may be masked by the large variety of body and surface waves which the higher density filaments may carry, so the absence of pressure balance in the microstreams should not rule out their interpretation as the extension of coronal plumes into interplanetary space. Mixing of plume-interplume material via the Kelvin-Helmholtz instability seems to be possible within the parameter ranges of the models defined here, only at large di stances from the Sun, beyond 0.2-0.3 AU. Plasma and composition measurements in the inner heliosphere, such as those which will become available with Solar Orbiter and Solar Probe Plus, should therefore definitely be able to identify plume remnants in the solar wind.

Velli, Marco↗

Evolution of Scenario Generation Capabilities in the ExaSGD Project

High-fidelity renewable energy scenarios and rare-event high-impact contingencies are essential for modeling operations and infrastructure expansion of the next generation power grids using exascale computing resources. As the ExaSGD project progressed, our capabilities for generating scenarios for modeling wind power output at multiple wind farms significantly improved, evolving from the use of independent random perturbations to importance sampling-based techniques capturing representative spatial-temporal relations. Contingency generation also improved, evolving from standard N-1 techniques to probabilistic models of infrastructure damage resulting from extreme weather events. We review the developments in the realistic intermittent-energy scenario forecasting and extreme-event contingency creation as the ExaSGD project progressed and discuss the future work in these areas.

economic dispatch↗

Efficient Modeling of Floating Wind Arrays Including Current Loads and Seabed Bathymetry

Capabilities for modeling the effects of seabed bathymetry and current drag loads on a floating wind farm are now available in an open-source model for quasi-static analysis. In this model, mooring lines and dynamic cables are represented by a quasi-static solver that can quickly represent complex mooring/cabling arrangements and arrays of floating bodies. To account for seabed bathymetry, we expand the model to include a surface mesh that captures changes in water depth over a rectangular grid. We formulate modifications to the catenary equations that capture a mooring line's profile and tensions when contacting a slope seabed. To account for current drag loads on mooring lines and dynamic cables, we formulate a novel technique that rotates the reference frame so that the vector sum of the the weight and the current force are used in the catenary equations, while accounting for the seabed orientation. To complete the system, current drag loads on floating substructures are handled by inclusion of strip-theory drag calculations. These new capabilities are verified by comparing with results from the established offshore dynamics models MoorDyn and OrcaFlex in equivalent steady-state scenarios. The results show very good agreement for both sloped seabeds and current loads. With computation times of the quasi-static model typically under one second, the model additions are a useful capability toward rapidly evaluating a floating wind array's response to environmental loads under realistic site conditions.

bathymetry↗

Benefits of Two Turbine Rotor Diameters and Hub Heights in the Same Wind Farm

Significant turbine-wake interactions greatly reduce power output in a wind farm. If different turbine hub heights and rotor diameters are included in the same wind farm, the wake interference in the farm will be reduced, resulting in a lower cost of energy (COE) than a farm with identical turbines. In this paper, we present a method to model wind farm COE in farms with hub heights and rotor diameters that vary across the wind farm. We also demonstrate how to optimize these wind farms to minimize COE. The results show that COE can be greatly reduced in wind farms with non-homogeneous turbines, especially when the turbines are spaced close together. For a unidirectional wind rose, including different turbine design in the wind farm has a similar decrease in COE to spreading the wind turbines farther apart. When the rotor diameter and hub height of the wind turbines in a farm are optimized uniformly, a COE decrease of 4% to 13% (depending on the grid spacing and wind shear exponent) is achieved compared to the baseline. When the rotor diameter and turbine heights are optimized non-uniformly, with two different diameters and heights throughout the farm, there is a COE decrease of 22% to 41% compared to the baseline. For a more spread wind rose with a dominant probability from the west, there is a COE decrease between 3% and 10% for uniformly optimized rotor diameter and height compared to the baseline. With two optimized rotor diameters and heights through the farm, a COE decrease of 3% to 19% is achieved. For a similar wind rose shifted such that the dominant wind direction is from the northwest, a COE decrease between 3% and 10% results from uniformly optimized wind turbines compared to the baseline. A COE decrease of 3% to 17% compared to the baseline occurs with two different turbines are optimized throughout the wind farm.

17 WIND ENERGY↗

Microlensing constraints on broad absorption and emission line flows in the quasar H1413+117

We present new integral field spectroscopy of the gravitationally lensed broad absorption line (BAL) quasar H1413+117, covering the ultraviolet restframe spectral range. We observe strong microlensing signatures in lensed image D, and we use this microlensing to simultaneously constrain both the broad emission and broad absorption line gas. The wavelength independence of image D magnifications across the broad emission lines (BELs) indicates a lower limit on the broad emission line region (BELR) size equal to the Einstein radius (ER) of the system: ≳11 (〈M〉/M{sub ⊙}){sup 0.5} lt-day for a lens redshift of 1.4 and ≳15 (〈M〉/M{sub ⊙}){sup 0.5} lt-day for z{sub L} = 0.94. Lensing simulations verify that the observed wavelength independence is very unlikely for BELRs with significant velocity stratification at size scales below an ER. We perform spectral decomposition to derive the intrinsic BEL and continuum spectrum, subject to BAL absorption. We reconstruct the intrinsic BAL absorption profile, whose features allow us to constrain outflow kinematics in the context of a disk-wind model. We find a very sharp, blueshifted onset of absorption of 1500 km s{sup −1} in both C iv and N v, which may correspond to an inner edge of a disk-wind’s radial outflow. The lower ionization Si iv and Al iii have higher-velocity absorption onsets, consistent with a decreasing ionization parameter with radius in an accelerating outflow. There is evidence of strong absorption in the BEL component, which indicates a high covering factor for absorption over two orders of magnitude in outflow radius.

79 ASTRONOMY AND ASTROPHYSICS↗