Search NASA⌕ Search

SEARCH · Search NASA

Results for “algorithmic differentiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

A weighted reverse Cuthill-McKee procedure for finite element method algorithms to solve strongly anisotropic electrodynamic problems

This paper presents a technique for improving the convergence rate of a generalized minimum residual (GMRES) algorithm applied for the solution of a algebraic system produced by the discretization of an electrodynamic problem with a tensorial electrical conductivity. The electrodynamic solver considered in this work is a part of a magnetohydrodynamic (MHD) code in the low magnetic Reynolds number approximation. The code has been developed for the analysis of MHD interaction during the re-entry phase of a space vehicle. This application is a promising technique intensively investigated for the shock mitigation and the vehicle control in the higher layers of a planetary atmosphere. The medium in the considered application is a low density plasma, characterized by a tensorial conductivity. This is a result of the behavior of the free electric charges, which tend to drift in a direction perpendicular both to the electric field and to the magnetic field. In the given approximation, the electrodynamics is described by an elliptical partial differential equation, which is solved by means of a finite element approach. The linear system obtained by discretizing the problem is solved by means of a GMRES iterative method with an incomplete LU factorization threshold preconditioning. The convergence of the solver appears to be strongly affected by the tensorial characteristic of the conductivity. In order to deal with this feature, the bandwidth reduction in the coefficient matrix is considered and a novel technique is proposed and discussed. First, the standard reverse Cuthill-McKee (RCM) procedure has been applied to the problem. Then a modification of the RCM procedure (the weighted RCM procedure, WRCM) has been developed. In the last approach, the reordering is performed taking into account the relation between the mesh geometry and the magnetic field direction. In order to investigate the effectiveness of the methods, two cases are considered. The RCM and WRCM procedures has successfully improved the convergence rate of the GMRES solver. For strong anisotropies, the WRCM procedure appears to have a higher convergence rate. The same behavior is shown when applying the methods to the rebuilding of an hypersonic MHD experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semi-Analytical Hierarchical Bayesian Inference of Nonlinear Model Structure in Stochastic Dynamics: Applied to Compartmental Models of Infectious Diseases

A Bayesian computational framework for parsimonious inference in stochastic nonlinear dynamical systems is presented. This framework enables the concurrent estimation of system states, time-varying parameters, time-invariant parameters, and the optimal sparsity structure of the model parameters. Because differential equation-based models are often simplified mechanistic or phenomenological representations, robust inference from noisy measurement data requires explicit treatment of model error and uncertainty. Model error and time-varying parameters can be represented as random processes, enabling inference while making minimal assumptions about the underlying sources of discrepancy and variability. Adopting stochastic differential equation representations affords the model significant flexibility, but can also render it susceptible to overfitting during statistical inversion, where the inferred model may track noise rather than the underlying signal. To alleviate the effects of overfitting and to enable the discovery of the optimal sparse representation of the time-invariant parameters, a Bayesian sparse learning algorithm is embedded within the framework. This sparse learning framework adopts an approximate hierarchical Bayesian setting defined by a series of semi-analytical expressions. The model structure inference framework is validated using a stochastic compartmental model for tracking and forecasting active cases of an infectious disease. Compartmental models describe population-level infectious disease dynamics through interactions among population fractions grouped by disease state. Mathematically, such models consist of a system of coupled ordinary differential equations. This example adopts an expressive compartmental model that includes multiple possible interactions between disease states, motivated by early uncertainty surrounding COVID-19 reinfection dynamics and their implications for long-term epidemic forecasting. The sparse learning exercise permits the inference of a priori unknown epidemiological dynamics from simulated public health data, discovering the nested compartmental model that optimizes the trade-off between average data-fit and model complexity. It is shown that inducing sparsity among the model parameters eliminates redundant interactions between compartments, equivalently revealing the optimal coupling structure between differential equations.

97 MATHEMATICS AND COMPUTING↗

Optimal experiment design for time-lapse traveltime tomography

Geophysical monitoring techniques offer the only noninvasive approach capable of assessing both the spatial and temporal dynamics of subsurface fluid processes. Increasingly, permanent sensor arrays in boreholes and on the ocean floor are being deployed to improve the repeatability and increase the temporal sampling of monitoring surveys. Because permanent arrays require a large up-front capital investment and are difficult (or impossible) to re-configure once installed, a premium is placed on selecting a geometry capable of imaging the desired target at minimum cost. We present a simple approach to optimizing downhole sensor configurations for monitoring experiments making use of differential seismic traveltimes. In our case, we use a design quality metric based on the accuracy of tomographic reconstructions for a suite of imaging targets. By not requiring an explicit singular value decomposition of the forward operator, evaluation of this objective function scales to problems with a large number of unknowns. We also restrict the design problem by recasting the array geometry into a low dimensional form more suitable for optimization at a reasonable computational cost. We test two search algorithms on the design problem: the Nelder-Mead downhill simplex method and the Multilevel Coordinate Search algorithm. The algorithm is tested for four crosswell acquisition scenarios relevant to continuous seismic monitoring, a two parameter array optimization, several scenarios involving four parameter length/offset optimizations, and a comparison of optimal multi-source designs. In the last case, we also examine trade-offs between source sparsity and the quality of tomographic reconstructions. One general observation is that asymmetric array lengths improve localized image quality in crosswell experiments with a small number of sources and a large number of receivers. Preliminary results also suggest that high-quality differential images can be generated using only a small number of optimally positioned sources.

54 ENVIRONMENTAL SCIENCES↗

Compressed Sensing with Sparse Corruptions: Fault-Tolerant Sparse Collocation Approximations

The recovery of approximately sparse or compressible coefficients in a polynomial chaos expansion is a common goal in many modern parametric uncertainty quantification (UQ) problems. However, relatively little effort in UQ has been directed toward theoretical and computational strategies for addressing the sparse corruptions problem, where a small number of measurements are highly corrupted. Such a situation has become pertinent today since modern computational frameworks are sufficiently complex with many interdependent components that may introduce hardware and software failures, some of which can be difficult to detect and result in a highly polluted simulation result. In this paper we present a novel compressive sampling--based theoretical analysis for a regularized $\ell^1$ minimization algorithm that aims to recover sparse expansion coefficients in the presence of measurement corruptions. Our recovery results are uniform (the theoretical guarantees hold for all compressible signals and compressible corruptions vectors) and prescribe algorithmic regularization parameters in terms of a user-defined a priori estimate on the ratio of measurements that are believed to be corrupted. We also propose an iteratively reweighted optimization algorithm that automatically refines the value of the regularization parameter and empirically produces superior results. Lastly, our numerical results test our framework on several medium to high dimensional examples of solutions to parameterized differential equations and demonstrate the effectiveness of our approach.

97 MATHEMATICS AND COMPUTING↗

Feature selection, statistical modeling and its applications to universal JPEG steganalyzer

Steganalysis deals with identifying the instances of medium(s) which carry a message for communication by concealing their exisitence. This research focuses on steganalysis of JPEG images, because of its ubiquitous nature and low bandwidth requirement for storage and transmission. JPEG image steganalysis is generally addressed by representing an image with lower-dimensional features such as statistical properties, and then training a classifier on the feature set to differentiate between an innocent and stego image. Our approach is two fold: first, we propose a new feature reduction technique by applying Mahalanobis distance to rank the features for steganalysis. Many successful steganalysis algorithms use a large number of features relative to the size of the training set and suffer from a ”curse of dimensionality”: large number of feature values relative to training data size. We apply this technique to state-of-the-art steganalyzer proposed by Tom´as Pevn´y (54) to understand the feature space complexity and effectiveness of features for steganalysis. We show that using our approach, reduced-feature steganalyzers can be obtained that perform as well as the original steganalyzer. Based on our experimental observation, we then propose a new modeling technique for steganalysis by developing a Partially Ordered Markov Model (POMM) (23) to JPEG images and use its properties to train a Support Vector Machine. POMM generalizes the concept of local neighborhood directionality by using a partial order underlying the pixel locations. We show that the proposed steganalyzer outperforms a state-of-the-art steganalyzer by testing our approach with many different image databases, having a total of 20000 images. Finally, we provide a software package with a Graphical User Interface that has been developed to make this research accessible to local state forensic departments.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Compressed sensing with sparse corruptions: Fault-tolerant sparse collocation approximations

The recovery of approximately sparse or compressible coefficients in a polynomial chaos expansion is a common goal in many modern parametric uncertainty quantification (UQ) problems. However, relatively little effort in UQ has been directed toward theoretical and computational strategies for addressing the sparse corruptions problem, where a small number of measurements are highly corrupted. Such a situation has become pertinent today since modern computational frameworks are sufficiently complex with many interdependent components that may introduce hardware and software failures, some of which can be difficult to detect and result in a highly polluted simulation result. In this paper we present a novel compressive sampling-based theoretical analysis for a regularized t1 minimization algorithm that aims to recover sparse expansion coefficients in the presence of measurement corruptions. Our recovery results are uniform (the theoretical guarantees hold for all compressible signals and compressible corruptions vectors), and prescribe algorithmic regularization parameters in terms of a user-defined a priori estimate on the ratio of measurements that are believed to be corrupted. We also propose an iteratively reweighted optimization algorithm that automatically refines the value of the regularization parameter, and empirically produces superior results. Our numerical results test our framework on several medium-to-high dimensional examples of solutions to parameterized differential equations, and demonstrate the effectiveness of our approach.

97 MATHEMATICS AND COMPUTING↗

Bilevel Parameter Optimization for Nonlocal Image Denoising Models

We propose a bilevel optimization approach for the determination of parameters in nonlocal image denoising. We consider both spatial weights in front of the fidelity term, as well as weights within the kernel of the nonlocal operator. In both cases we investigate the differentiability of the solution operator in function spaces and derive a first order optimality system that characterizes local minima. For the numerical solution of the problems, we propose a second-order optimization algorithm in combination with a finite element discretization of the nonlocal denoising models and a computational strategy for the solution of the resulting dense linear systems. Several experiments are run in order to show the suitability of our approach.

97 MATHEMATICS AND COMPUTING↗

RELAP-7 Application and Enhancement for FLEX Strategies and ATF Behavior under Extended Loss of AC Power Conditions

This report summarizes the results of a three-year research project sponsored by the U.S. Department of Energy (DOE) Nuclear Energy University Program (NEUP) to enhance and apply the RELAP-7 code by adding and improving several important components (e.g., a mechanistic Reactor Core Isolation Cooling (RCIC) system model) for thermal hydraulic studies of LWRs under ELAP conditions and evaluating the time available for transition to portable FLEX equipment. The project team included University of Massachusetts–Lowell, The Ohio State University, Texas A&M University, Idaho National Laboratory and Oak Ridge National Laboratory. In the Fukushima accident, it was found that the RCIC system played a crucial role in delaying core meltdown by almost three days in Fukushima Daiichi Unit 2, because of self-regulated operation of the steam driven RCIC turbine-pump injection system. Steam flow in the convergent-divergent nozzles of the RCIC Terry turbine is two-phase non-equilibrium transonic flow with homogenous nucleation condensation. To more accurately predict the dynamic process and behavior of the transonic compressible steam flow, a one-dimensional transient two-phase analytical model is presented. A simplified four-fluid model was employed in the present work with the consideration of four separate fluid fields: vapor, liquid film, entrained droplets and condensed droplets. The mass, momentum and energy interactions between the fluids were considered and modeled. An extended seven-equation non-equilibrium critical flow model was developed to obtain the critical pressure and velocities of each phase at the nozzle throat. To predict the wetness in the divergent section, a mechanistic nucleation condensation model was integrated in the nozzle analysis model, considering the generation and consequent growth of droplets. The governing differential equations on a staggered grid were discretized using the second-order Lax-Wendroff scheme with a flux limiter, and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE) algorithm was employed to solve the discrete linear system. To demonstrate the predictability and reliability of the physical models and the numerical method proposed in the present work, three representative nozzles were modeled and simulated. The results show good agreement with the available experimental data, even for condensation shock. Then, the 1D nozzle model was employed to obtain nozzle flow tables of the Terry turbine nozzle for different working pressures which can cover the operation pressure range of the RCIC system. A mechanistic RCIC turbine-pump system model was developed and implemented in the system code TRACE to simulate dynamic responses of the RCIC system under Beyond Design Basis Accident (BDBA) conditions. The turbine-pump governing equations are based on the control volume approach of the angular momentum balance. The physics based mechanistic RCIC model was developed using the TRACE control system components (i.e., signal variables, control blocks, and tables), and incorporated into a TRACE boiling water reactor (BWR) model. The TRACE model in this report has a detailed nodalization of the reactor pressure vessel (RPV), and all of the major flow paths and system components, including the safety relief valves (SRVs) and the containment suppression pool and drywell. Based on the nozzle flow tables generated from the 1D nozzle model developed, the turbine drive torque can be calculated from table lookup. Since the detailed specifications of the RCIC pump are unavailable, the homologous curves for a Bingham pump were used in the current pump component. A station black-out (SBO) accident test problem was selected to demonstrate the TRACE RCIC model. The short-term SBO simulations were performed for two cladding materials: Zircaloy and FeCrAl, to demonstrate the effect of the accident tolerant fuel cladding on fuel heat-up under BDBA accident conditions. The wetwell plays a vital safety role in SBO and other BWR accident scenarios in that it can reduce containment pressure and supply additional core make-up water. The suppression pool temperature distribution has a very large impact on both RPV and containment pressure. Thus, another novel contribution of the project comes mainly from an improved, systems-level wetwell model which can capture buoyancy-induced thermal stratification effects due to steam injection and condensation. A two-zone stratified wetwell model has been implemented in RELAP-7 and some results from that model are presented. This wetwell model is capable of simulating thermal stratification due to a low steam mass injection rate. With a low mass flow rate, the model assumes that all the steam condenses within the pipe and the resulting plume can be approximated with a purely buoyant, heat-source driven model. The wetwell model developed with these assumptions is adequate to simulate slow transients such as extended SBO transients.

42 ENGINEERING↗

The Role of Data Transfer on the Selection of a Single vs Multiple Mesh Architecture for Tightly Coupled Multiphysics Applications

Data transfer from one distinct mesh to another may be necessary in any number of applications, including prolongation operations supporting multigrid solution methods, spatial adaptation, remeshing, and arbitrary Lagrangian-Eulerian (ALE) and multiphysics simulation. This data transfer process is also referred to as remapping, rezoning and interpolation. Intermesh data transfer has the potential to introduce error into a simulation; the magnitude and importance of which depends on the transfer scenario and the algorithm used to perform the transfer. For a transient analysis, data transfer may occur many times during a simulation, with possible error accumulation at each transfer. The present study develops selected scenarios that illustrate data transfer error and how it might impact an analysis. This study examines remapping error by using static analytical functions to compare various remapping schemes. It also investigates the significance and nature of data transfer error for a simple multiphysics system involving a transient coupled system of partial differential equations. It concludes that remapping error can be significant both for static functions and for coupled multiphysics systems. Aggregate error is shown to be a function of remapping scheme, mesh coarseness, nature of the remapped function and mesh disparity. In cases of extreme mesh disparity, this study shows that remapping can lead to excessive error and even to solution instability. Further, this work motivates that remapping error should be included in the estimation of numerical error, if data transfer is employed in a numerical simulation.

99 GENERAL AND MISCELLANEOUS↗

PROBING FINE-SCALE IONOSPHERIC STRUCTURE WITH THE VERY LARGE ARRAY RADIO TELESCOPE

High-resolution ({approx}1 arcmin) astronomical imaging at low frequency ({<=}150 MHz) has only recently become practical with the development of new calibration algorithms for removing ionospheric distortions. In addition to opening a new window in observational astronomy, the process of calibrating the ionospheric distortions also probes ionospheric structure in an unprecedented way. Here we explore one aspect of this new type of ionospheric measurement: the differential refraction of celestial source pairs as a function of their angular separation. This measurement probes variations in the spatial gradient of the line-of-sight total electron content (TEC) to {approx}10{sup -3} TECU km{sup -1} (1 TECU = 10{sup 12} cm{sup -2}) accuracy over spatial scales of under 10 km to over 100 km. We use data from the VLA Low-frequency Sky Survey (VLSS), a nearly complete 74 MHz survey of the entire sky visible to the VLA telescope in Socorro, New Mexico. These data comprise over 500 hr of observations, all calibrated in a standard way. While ionospheric spatial structure varies greatly from one observation to the next, when analyzed over hundreds of hours, statistical patterns become apparent. We present a detailed characterization of how the median differential refraction depends on source pair separation, elevation, and time of day. We find that elevation effects are large, but geometrically predictable and can be 'removed' analytically using a 'thin-shell' model of the ionosphere. We find significantly greater ionospheric spatial variations during the day than at night. These diurnal variations appear to affect the larger angular scales to a greater degree indicating that they come from disturbances on relatively larger spatial scales (hundreds of kilometers, rather than tens of kilometers)

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum computing for fusion energy science applications

This is a review of recent research exploring and extending present-day quantum computing capabilities for fusion energy science applications. We begin with a brief tutorial on both ideal and open quantum dynamics, universal quantum computation, and quantum algorithms. Then, we explore the topic of using quantum computers to simulate both linear and nonlinear dynamics in greater detail. Because quantum computers can only efficiently perform linear operations on the quantum state, it is challenging to perform nonlinear operations that are generically required to describe the nonlinear differential equations of interest. In this work, we extend previous results on embedding nonlinear systems within linear systems by explicitly deriving the connection between the Koopman evolution operator, the Perron–Frobenius evolution operator, and the Koopman–von Neumann evolution (KvN) operator. We also explicitly derive the connection between the Koopman and Carleman approaches to embedding. Extension of the KvN framework to the complex-analytic setting relevant to Carleman embedding, and the proof that different choices of complex analytic reproducing kernel Hilbert spaces depend on the choice of Hilbert space metric are covered in the appendixes. Finally, we conclude with a review of recent quantum hardware implementations of algorithms on present-day quantum hardware platforms that may one day be accelerated through Hamiltonian simulation. We discuss the simulation of toy models of wave–particle interactions through the simulation of quantum maps and of wave–wave interactions important in nonlinear plasma dynamics.

Joseph, I. (ORCID:0000000255400840)↗

An adaptive and stability-promoting layerwise training approach for sparse deep neural network architecture

This work presents a two-stage adaptive framework for progressively developing deep neural network (DNN) architectures that generalize well for a given training data set. In the first stage, a layerwise training approach is adopted where a new layer is added each time and trained independently by freezing parameters in the previous layers. We impose desirable structures on the DNN by employing manifold regularization, sparsity regularization, and physics-informed terms. We introduce a ε – δ – stability-promoting concept as a desirable property for a learning algorithm and show that employing manifold regularization yields a ε – δ stability-promoting algorithm. Further, we also derive the necessary conditions for the trainability of a newly added layer and investigate the training saturation problem. In the second stage of the algorithm (post-processing), a sequence of shallow networks is employed to extract information from the residual produced in the first stage, thereby improving the prediction accuracy. Numerical investigations on prototype regression and classification problems demonstrate that the proposed approach can outperform fully connected DNNs of the same size. Moreover, by equipping the physics-informed neural network (PINN) with the proposed adaptive architecture strategy to solve partial differential equations, we numerically show that adaptive PINNs not only are superior to standard PINNs but also produce interpretable hidden layers with provable stability. As a result, we also apply our architecture design strategy to solve inverse problems governed by elliptic partial differential equations.

42 ENGINEERING↗

The Discrete Equation Method (DEM) for Fully Compressible, Two-Phase Flows in Ducts of Spatially Varying Cross-Section

For the simulation of light water nuclear reactor coolant flows, general two-phase models (valid for all volume fractions) have been generally used which, while allowing for velocity disequilibrium, normally force pressure equilibrium between the phases (see, for example, the numerous models of this type described in H. Städtke, Gasdynamic Aspects of Two-Phase Flow, Wiley-VCH, 2006). These equations are not hyperbolic, their physical wave dynamics are incorrect, and their solution algorithms rely on dubious truncation error induced artificial viscosity to render them numerically well posed over a portion of the computational spectrum. The inherent problems of the traditional approach to multiphase modeling, which begins with an averaged system of (ill-posed) partial differential equations (PDEs) which are then discretized to form a numerical scheme, are avoided by employing a new homogenization method known as the Discrete Equation Method (DEM) (R. Abgrall and R. Saurel, Discrete Equations for Physical and Numerical Compressible Multiphase Mixtures, J. Comp. Phys. 186, 361-396, 2003). This method results in well-posed hyperbolic systems, this property being important for transient flows. This also allows a clear treatment of non-conservative terms (terms involving interfacial variables and volume fraction gradients) permitting the solution of interface problems without conservation errors, this feature being important for the direct numerical simulation of two-phase flows. Unlike conventional methods, the averaged system of PDEs for the mixture are not used, and the DEM method directly obtains a well-posed discrete equation system from the single-phase conservation laws, producing a numerical scheme which accurately computes fluxes for arbitrary number of phases and solves non-conservative products. The method effectively uses a sequence of single phase Riemann problem solutions. Phase interactions are accounted for by Riemann solvers at each interface. Non-conservative terms are correctly approximated. Some of the closure relations missing from the traditional approach are automatically obtained. Lastly, the continuous equation system resulting from the discrete equations can be identified by taking the continuous limit with weak-wave assumptions. In this work, this approach is tested by constructing a DEM model for the flow of two compressible phases in 1-D ducts of spatially varying cross-section with explicit time integration. An analytical equation of state is included for both water vapor and liquid phases, and a realistic interphase mass transfer model is developed based on interphase heat transfer. A robust compliment of boundary conditions are developed and discussed. Though originally conceived as a first step toward implict time integration of the DEM method (to relieve time step size restrictions due to stiffness and to achieve tighter coupling of equations) in multidimensions, this model offers some unique capabilities for incorporation into next generation light water reactor safety analysis codes. We demonstrate, on a converging-diverging two-phase nozzle, that this well-posed, 2-pressure, 2-velocity DEM model can be integrated to a realistic and meaningful steady-state with both phases treated as compressible.

42 ENGINEERING↗

An ODE-Enabled Distributed Transient Stability Analysis for Networked Microgrids

Networked microgrid (NMG) exhibits noteworthy resiliency and flexibility benefits for the mutual support from neighboring microgrids. With high penetration of distributed energy resources (DERs) and the associated controls, the transient stability analysis of NMGs is of critical significance. To address the issues of computation burdens and privacy in the centralized transient analysis, this paper devises an ordinary differential equation (ODE)-enabled distributed transient stability (DTS) methodology for NMGs. First, an ODE-based microgrid model is established to capture the dynamics in the droop control of DERs as well as network and load. Further, a distributed DTS is devised for the ODE representation of an NMG, allowing a privacy-preserving transient analysis of each microgrid while accurately reconstructing the frequency dynamics under droop controls in all DERs. In conclusion, extensive tests are performed to verify the validity of the ODE-based microgrid model through both dynamic response and eigenvalue analysis, and the efficacy of the DTS algorithm in simulating the large signal responses and the frequent fluctuations in NMG.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

hp -VPINNs: Variational physics-informed neural networks with domain decomposition

We formulate a general framework for hp-variational physics-informed neural networks (hp-VPINNs) based on the nonlinear approximation of shallow and deep neural networks and hp-refinement via domain decomposition and projection onto the space of high-order polynomials. The trial space is the space of neural network, which is defined globally over the entire computational domain, while the test space contains piecewise polynomials. Specifically in this study, the hp-refinement corresponds to a global approximation with a local learning algorithm that can efficiently localize the network parameter optimization. Here, we demonstrate the advantages of hp-VPINNs in both accuracy and training cost for several numerical examples of function approximation and in solving differential equations.

42 ENGINEERING↗

Acceleration of the Particle Swarm Optimization for Peierls–Nabarro modeling of dislocations in conventional and high-entropy alloys

Dislocations are among the most important defects in determining the mechanical properties of both conventional alloys and high-entropy alloys. The Peierls-Nabarro model supplies an efficient pathway to their geometries and mobility. The difficulty in solving the integro-differential Peierls-Nabarro equation is how to effectively avoid the local minima in the energy landscape of a dislocation core. Among the other methods to optimize the dislocation core structures, we choose the algorithm of Particle Swarm Optimization, an algorithm that simulates the social behaviors of organisms. By employing more particles (bigger swarm) and more iterative steps (allowing them to explore for longer time), the local minima can be effectively avoided. But this would require more computational cost. The advantage of this algorithm is that it is readily parallelized in modern high computing architecture. We demonstrate the performance of our parallelized algorithm scales linearly with the number of employed cores.

36 MATERIALS SCIENCE↗

Learning Physically Interpretable Atmospheric Models From Data With WSINDy

The multiscale and turbulent nature of Earth's atmosphere has historically rendered accurate weather modeling a hard problem. Recently, there has been an explosion of interest surrounding data-driven approaches to weather modeling, which in many cases show improved forecasting accuracy and computational efficiency when compared to traditional methods. However, many of the current data-driven approaches employ highly parameterized neural networks, often resulting in uninterpretable models and limited gains in scientific understanding. In this work, we address the interpretability problem by explicitly discovering partial differential equations governing atmospheric phenomena, identifying symbolic mathematical models with direct physical interpretations. The purpose of this paper is to demonstrate that, in particular, the weak-form sparse identification of nonlinear dynamics (WSINDy) algorithm can learn effective atmospheric models from both simulated and assimilated data. Our approach adapts the standard WSINDy algorithm to work with high-dimensional fluid data of arbitrary spatial dimension.

58 GEOSCIENCES↗

Inverse design of plasma metamaterial devices with realistic elements

In an expansion of a previous study, we apply inverse design methods to produce two-dimensional plasma metamaterial devices with realistic plasma elements which incorporate quartz envelopes, collisionality (loss), non-uniform density profiles, and resistance to experimental error/perturbation. Finite difference frequency domain simulations are used along with forward-mode differentiation to design waveguides and demultiplexers operating under the transverse magnetic polarization. Additionally, optimal devices with realistic elements are compared to previous devices with idealized elements, and several parameter initialization schemes for the optimization algorithm are explored, yielding a robust procedure for producing such devices. Demultiplexing and waveguiding are demonstrated for microwave-regime devices composed of plasma elements with reasonable space-averaged plasma frequencies ~10GHz and a collision frequency ~1 GHz, allowing for future in-situ training and experimental realization of these designs.

42 ENGINEERING↗