Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Preparation and characterization on nano-hybrid composite solid polymer electrolyte of PVdF-HFP /MG49-ZrO{sub 2} for battery application

Initial study on nano composite polymer electrolyte of PVdF-HFP/MG49-ZrO{sub 2} has been done. The zirconium was synthesis via in-situ sol-gel method in a dissolved polymer blends. The effects of different concentrations of zirconium and pH values have been investigated on nano composite polymer (NCP). Analysis impedance show that only at 6 wt. % of zirconium for all pH values show a semi-circle arc which have lowest value of bulk resistance. No ionic conductivity value is obtain due to the absent of ion charge carriers. Analysis of XRD revealed that crystallinity phase of the nano composite polymer was affect by different pH values. However, no significant changes have been observed in IR bands. This could well indicate that different pH medium did not affect the chemical bonding in the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Code Considerations for Solar Rooftop Installations

Residential rooftop solar panel installations are limited in part by the high cost of structural related code requirements for field installation. Permitting solar installations is difficult because there is a belief among residential permitting authorities that typical residential rooftops may be structurally inadequate to support the additional load associated with a photovoltaic (PV) solar installation. Typical engineering methods utilized to calculate stresses on a roof structure involve simplifying assumptions that render a complex non-linear structure to a basic determinate beam. This method of analysis neglects the composite action of the entire roof structure, yielding a conservative analysis based on a rafter or top chord of a truss. Consequently, the analysis can result in an overly conservative structural analysis. A literature review was conducted to gain a better understanding of the conservative nature of the regulations and codes governing residential construction and the associated structural system calculations.

Dwyer, Stephen F.↗

Theoretical Analysis of Photoelectron Spectra of Pure and Mixed Metal Clusters: Disentangling Size, Structure, and Composition Effects

A theoretical/computational description and analysis of the spectra of electron binding energies of Al 12 - , Al 13 - and Al 12 Ni- clusters, which differ in size and/or composition by a single atom yet possess strikingly different measured photoelectron spectra, is presented. It is shown that the measured spectra can not only be reproduced computationally with quantitative fidelity – this is achieved through a combination of state-of-the-art density functional theory with a highly accurate scheme for conversion of the Kohn-Sham eigenenergies into electron binding energies – but also explained in terms of the effects of size, structure/symmetry and composition. Furthermore, a new methodology is developed and applied that provides for disentanglement and differential assignment of the separate roles played by size, structure/symmetry and composition in defining the observed differences in the measured spectra. The methodology is general and applicable to any finite system, homogeneous or heterogeneous. Finally, we project that in combination with advances in synthesis techniques this methodology will become an indispensable computation-based aid in the design of controlled synthesis protocols for manufacture of nanosystems and nanodevices with precisely desired electronic and other characteristics.

36 MATERIALS SCIENCE↗

Data from Biodiesel Production from Engineered Sugarcane Lipids under Uncertain Feedstock Compositions: Process Design and Techno-Economic Analysis

In this study, different process schemes were designed and evaluated for biodiesel production from engineered cane lipids with uncertain fatty acid compositions. Four different process schemes were compared under (i) thermal glycerolysis and (ii) enzymatic glycerolysis approaches. These schemes were based on the biodiesel yield and economic indicators such as the net present value (NPV) and the minimum selling price (MSP) of biodiesel. A scheme with polar lipid separation under thermal glycerolysis resulted in the maximum NPV ($96.5 million) and minimum MSP ($1107/ton biodiesel), respectively. Through local sensitivity analysis, it was concluded that the cane lipid percentage is the most significant factor influencing process economics. A conjoint analysis of the lipid procurement price and cane lipid percent suggested that 15% cane lipids with a low lipid procurement price ($0.536/kg) results in a positive NPV. When the cane lipid price is higher (>$0.80/kg), a 20% lipid content should be considered to achieve a positive NPV. At 20% cane lipids, the worst-case and best-case scenarios were evaluated by analyzing the interplay of the three most important parameters, The best-case scenario revealed that the minimum NPV under any process scheme could yield more than $100 million (or MSP: $0.80/L), and the worst-case analysis showed that losses incurred by the plant could be as high as $80 million (MSP: $1.36/L). A Monte Carlo simulation indicated that there is a 70% chance of the plant being profitable (NPV > 0).

Conversion↗

Biodiesel production from engineered sugarcane lipids under uncertain feedstock compositions: Process design and techno-economic analysis

In this study, different process schemes were designed and evaluated for biodiesel production from engineered cane lipids with uncertain fatty acid compositions. Four different process schemes were compared under (i) thermal glycerolysis and (ii) enzymatic glycerolysis approaches. These schemes were based on the biodiesel yield and economic indicators such as the net present value (NPV) and the minimum selling price (MSP) of biodiesel. A scheme with polar lipid separation under thermal glycerolysis resulted in the maximum NPV ($\$96.5$ million) and minimum MSP ($\$1107$ /ton biodiesel), respectively. Through local sensitivity analysis, it was concluded that the cane lipid percentage is the most significant factor influencing process economics. A conjoint analysis of the lipid procurement price and cane lipid percent suggested that 15% cane lipids with a low lipid procurement price ($\$0.536$ /kg) results in a positive NPV. When the cane lipid price is higher (> $\$0.80$ /kg), a 20% lipid content should be considered to achieve a positive NPV. At 20% cane lipids, the worst-case and best-case scenarios were evaluated by analyzing the interplay of the three most important parameters, Here, the best-case scenario revealed that the minimum NPV under any process scheme could yield more than $\$100$ million (or MSP: $\$0.80$ /L), and the worst-case analysis showed that losses incurred by the plant could be as high as 80 million (MSP: $\$1.36$ /L). A Monte Carlo simulation indicated that there is a 70% chance of the plant being profitable (NPV > 0).

09 BIOMASS FUELS↗

Biomolecular complex viewed by dynamic nuclear polarization solid-state NMR spectroscopy

Solid-state nuclear magnetic resonance (ssNMR) is an indispensable tool for elucidating the structure and dynamics of insoluble and non-crystalline biomolecules. The recent advances in the sensitivity-enhancing technique magic-angle spinning dynamic nuclear polarization (MAS-DNP) have substantially expanded the territory of ssNMR investigations and enabled the detection of polymer interfaces in a cellular environment. This article highlights the emerging MAS-DNP approaches and their applications to the analysis of biomolecular composites and intact cells to determine the folding pathway and ligand binding of proteins, the structural polymorphism of low-populated biopolymers, as well as the physical interactions between carbohydrates, proteins, and lignin. Furthermore, these structural features provide an atomic-level understanding of many cellular processes, promoting the development of better biomaterials and inhibitors. It is anticipated that the capabilities of MAS-DNP in biomolecular and biomaterial research will be further enlarged by the rapid development of instrumentation and methodology.

36 MATERIALS SCIENCE↗

Laser scattering by submicron droplets formed during the electrical explosion of thin metal wires

Abstract This paper presents the results of studying dispersed media formation during the electrical explosion of thin metal wires in vacuum by using low-current generators (~1–10 kA). Particular attention is paid to the analysis of the composition and structure of the corresponding explosion products as well as to the problem of their visualization using simultaneous laser interferometry and shadow imaging at two wavelengths (1.064 µ m and 0.532 µ m). Our findings indicate the important role in the visualization of the explosion products that belongs to multiple scattering by submicron droplets of dense condensed matter, which are mixed with metal vapor. The hypothesis on the existence of submicron droplets in the products of exploding metal wires correlates with the results obtained by soft x-ray radiography combined with a laser probing technique. Taking into account the multiple scattering by submicron droplets, it is possible to significantly clarify the parameters of the explosion products visualized via laser probing techniques as well as to gain a deeper insight into the physics behind the electrical wire explosion.

Physics↗

Multilevel probabilistic approach to evaluate manufacturing defect in composite aircraft structures

In this work it is developed a reliable approach and its feasibility to the design and analysis of a composite structures. The metric is compared the robustness and reliability designs versus the traditional design, to demonstrate the gain that can be achieved with a probabilistic approach. The use of the stochastic approach of the uncertain parameteters in combination with the multi-scale levels analysis is the main objective of this paper. The work is dedicated to analyze the uncertainties in the design, tests, manufacturing process, and key gates such as materials characteristic.

36 MATERIALS SCIENCE↗

Axial Tensile Failure Analysis of SiC{sub f}/Ti Composite Based on Continuum Cohesive Zone Model

In this paper, the failure behavior of SiC fiber-reinforced Ti-6Al-4V matrix composite (SiC{sub f}/Ti) under longitudinal loads was studied experimentally and theoretically. Experimental results show that the interface of SiC{sub f}/Ti composite is continuous and integral. Through SEM observations, it was found that transverse matrix cracks initiated from the debonding region of the interface. A three-dimensional representative volume element was developed to simulate the failure process of SiC{sub f}/Ti-6Al-4V composite. A continuum cohesive zone model is employed to describe the debonding behavior at the interface, compared with a discrete one. More accurate simulated results were obtained by a continuum cohesive zone model, corresponding to experimental results. The transverse cracking behavior of the matrix was simulated. The stress–strain curves predicted by the continuum cohesive zone model show a good agreement with the experimental results. The fiber volume fraction, interface strength and interface toughness are investigated to exhibit their influences upon the longitudinal mechanical characteristics of SiC{sub f}/Ti-6Al-4V composite.

36 MATERIALS SCIENCE↗

Indirect morphological analysis of particles in polymer particle composites via non-destructive permittivity measurements

We report polymers with specific properties (e.g. electrical, optical or mechanical) are commonly obtained via the addition of additives. The composites final properties rely on the preservation of these additives during embedding, which is, in particular, challenging for high aspect ratio particles, like shear-sensitive flaky particles (ssFP). Thus, in cases of ssFP off- or in-line monitoring is required. This study addresses the lack of suitable non-destructive monitoring methods appropriate for ssFP possessing a thickness below 1um and an area equivalent diameter of several 10 um. An elegant method was developed to validate the integrity of ssFP within composites, which is based on the measurement of the composite's permittivity and applying precise micro-structure property correlations to indirectly determine their morphological features. The main hypothesis tested was that a reduction of the particle’s aspect ratio by a factor of larger than 5 can be detected by the measurement of the composite's permittivity. In this study,the matrix polymer polyethylene or an epoxy resin together with mica-based ssFP with a mean area equivalent diameter of 42 um were used. The micro-structure property correlation presented by G. Ondracek [Z. f. Werkstofftechnik, 8:280-287, 1977] provided the necessary theoretical backbone to indirectly infer geometrical changes to the ssFP from permittivity measurements. An excellent match was obtained between the indirectly and the directly determined particle aspect ratios. This preliminary study established the presented technique as a promising non-destructive test method to monitor the integrity of ssFPs embedded in a polymer. In principle this technique is adaptable for in-line process monitoring.

36 MATERIALS SCIENCE↗

A Comparative Study on the Effect of Zr, Sn, and Ti on the Crystallization Behavior of Nepheline Glass

In alkali aluminosilicate glasses, additions of 4+ cations like Zr and Ti are often added to promote crystallization. In this study, Zr, Ti, or Sn are progressively substituted for Si in nepheline (NaAlSiO4) glass to determine their impact on the crystallization behavior. For glasses homogeneous on quenching, up to NaAlZr0.075Si0.925O4, NaAlSn0.100Si0.900O4, and NaAlTi0.300Si0.700O4, respectively, crystallization temperatures were investigated by thermal analysis. A subset of compositions was subjected to additional thermal analysis, varying heating rate and particle size, to investigate the subtleties of crystallization behavior. Subsequent heat treatment of glass powders was performed to maximize crystallization, and glass-ceramic microstructure was assessed by optical microscopy and electron microprobe, while crystalline phases were determined by X-ray diffraction. In all cases the major crystalline phase was orthorhombic carnegieite, which accommodated Ti in its structure but not Zr or Sn, and excess 4+ cations formed MO2, i.e., brookite, baddeleyite, and cassiterite, respectively.

Nienhuis-Marcial, Emily T.↗

Electric field induced short range to long range structural ordering and its influence on the Eu{sup +3} photoluminescence in the lead-free ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}

Eu{sup +3} was incorporated into the lattice of a lead-free ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} (NBT) as per the nominal formula Na{sub 0.5}Bi{sub 0.5−x}Eu{sub x}TiO{sub 3}. This system was investigated with regard to the Eu{sup +3} photoluminescence (PL) and structural behaviour as a function of composition and electric field. Electric field was found to irreversibly change the features in the PL spectra and also in the x-ray diffraction patterns below the critical composition x = 0.025. Detailed analysis revealed that below the critical composition, electric field irreversibly suppresses the structural heterogeneity inherent of the host matrix NBT and brings about a long range ferroelectric state with rhombohedral (R3c) distortion. It is shown that the structural disorder on the nano-scale opens a new channel for radiative transition which manifests as a new emission line branching off from the main {sup 5}D{sub 0}→{sup 7}F{sub 0} line along with a concomitant change in the relative intensity of the other crystal field induced Stark lines with different J values. The study suggests that Eu{sup +3} luminescence can be used to probe the relative degree of field induced structural ordering in relaxor ferroelectrics and also in high performance piezoelectric alloys where electric field couples very strongly with the lattice and structural degrees of freedom.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constraining models for the origin of ultra-high-energy cosmic rays with a novel combined analysis of arrival directions, spectrum, and composition data measured at the Pierre Auger Observatory

The combined fit of the measured energy spectrum and shower maximum depth distributions of ultra-high-energy cosmic rays is known to constrain the parameters of astrophysical models with homogeneous source distributions. Studies of the distribution of the cosmic-ray arrival directions show a better agreement with models in which a fraction of the flux is non-isotropic and associated with the nearby radio galaxy Centaurus A or with catalogs such as that of starburst galaxies. Here, we present a novel combination of both analyses by a simultaneous fit of arrival directions, energy spectrum, and composition data measured at the Pierre Auger Observatory. The model takes into account a rigidity-dependent magnetic field blurring and an energy-dependent evolution of the catalog contribution shaped by interactions during propagation. We find that a model containing a flux contribution from the starburst galaxy catalog of around 20% at 40 EeV with a magnetic field blurring of around 20° for a rigidity of 10 EV provides a fair simultaneous description of all three observables. The starburst galaxy model is favored with a significance of 4.5σ (considering experimental systematic effects) compared to a reference model with only homogeneously distributed background sources. By investigating a scenario with Centaurus A as a single source in combination with the homogeneous background, we confirm that this region of the sky provides the dominant contribution to the observed anisotropy signal. Models containing a catalog of jetted active galactic nuclei whose flux scales with the γ-ray emission are, however, disfavored as they cannot adequately describe the measured arrival directions.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Application Power and Schedule Composition in a High Performance Computing Environment

As the capacity of high performance computing (HPC) systems continues to grow, small changes in energy management have the potential to produce significant energy savings. In this paper, we employ an extensive informatics system for aggregating and analyzing real-time performance and power use data to evaluate energy footprints of jobs running in an HPC data center. We look at the effects of algorithmic choices for a given job on the resulting energy footprints, and analyze application-specific power consumption, and summarize average power use in the aggregate. All of these views reveal meaningful power variance between classes of applications as well as chosen methods for a given job. Using these data, we discuss energy-aware cost-saving strategies based on reordering the HPC job schedule. Using historical job and power data, we present a hypothetical job schedule reordering that: (1) reduces the facility's peak power draw and (2) manages power in conjunction with a large-scale photovoltaic array. Lastly, we leverage this data to understand the practical limits on predicting key power use metrics at the time of submission.

97 MATHEMATICS AND COMPUTING↗

Artificial Intelligence for Accelerating Nuclear Applications, Science, and Technology

Artificial intelligence (AI) and machine learning (ML) methods have had significant impacts in science and technology in recent years. These methods for generating models from datasets or logic-based algorithms that emulate aspects of human performance can similarly accelerate the fields of nuclear applications, science, and technology toward the IAEA goals of contributing to peace, health, and prosperity. In order to accomplish advances with AI in general and ML in particular across these fields, IAEA can play a significant role by establishing, hosting and curating centralised resources, including databases, adhering to FAIR (findable, accessible, interoperable and reusable) principles and Open Science best practices, providing stewardship of data sharing, supporting training efforts and development of relevant workforces, as well as enabling connections among the scientific, technology, mathematics, AI and ethics communities. Many areas can benefit from the use of AI in the realm of nuclear applications. In human health, these areas include clinical research, epidemiology, nutrition, medical imaging, radiotherapy and education of health professionals. AI-based tools are also being used to facilitate different clinical tasks in imaging, computer-assisted diagnosis in mammography and lung cancer screening programmes, and dose prediction in nuclear medicine procedures. ML methods in particular may also increase the efficiency and accuracy of the analysis of computerised tomography and dual-energy absorptiometry scans for body composition and bone analysis. The application of AI methods to nuclear and related technologies in food and agriculture can lead to significant advances and improved efficiency in the optimisation of agricultural production, food product development, management of supply chains, food safety and food authenticity control. In the water and environmental sector, AI can help inform policies to mitigate the world’s water problems. The application of AI techniques to hydrology and environmental sciences is expected to improve patterns identification and enable model predictions under a changing climate.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗