Search NASA⌕ Search

SEARCH · Search NASA

Results for “continuous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Closed-Form Solutions for the Equations of Motion of the Heavy Symmetrical Top with One Point Fixed

The Equations of Motion (EOM) for the Heavy Symmetrical Top with One Point Fixed are highly non-linear. The literature describes the numerical methods that are used to resolve this Classical system including modern tools i.e. the Runge-Kutta Fourth Order method. It is more difficult to derivate closed-form solutions for the EOM and as mentioned in the literature it is not always possible to find the close-form solution for all the EOM. Fortunately, there are a few examples available that will serve as a guide to move further on in this topic. It is the purpose of this paper to find a methodology that will produce the solutions for a given subset of EOM that fulfill certain requisites. The report is organized as follows: it starts with a very short summary of the literature available on this topic and quickly follows into the derivation of the EOM using the Euler-Lagrange method. The Routhian will be used to reduce the size of the expression. It continues with the formulation of the Classical cubic function (f(u)) through a novel process. The roots of f(u) are of the outmost importance to be able to find the EOM closed-form solution, and once the final roots are selected the general method that will produce the closed-form solutions is presented. Two sets of examples are included to show the validity of the process and comparisons of the results from the closed-form solutions vs. the numerical results for these examples are shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Investigating Scientific Data Change with User Research Methods

Scientific datasets are continually expanding and changing due to fluctuations with instruments, quality assessment and quality control processes, and modifications to software pipelines. Datasets include minimal information about these changes or their effects requiring scientists manually assess modifications through a number of labor intensive and ad-hoc steps. The Deduce project is investigating data change to develop metrics, methods, and tools that will help scientists systematically identify and make decisions around data changes. Currently, there is a lack of understanding, and common practices, for identifying and evaluating changes in datasets since systematically measuring and managing data change is under explored in scientific work. We are conducting user research to address this need by exploring scientist's conceptualizations, behaviors, needs, and motivations when dealing with changing datasets. Our user research utilizes multiple methods to produce foundational, generative insights and evaluate research products produced by our team. In this paper, we detail our user research process and outline our findings about data change that emerge from our studies. Our work illustrates how scientific software teams can push beyond just usability testing user interfaces or tools to better probe the underlying ideas they are developing solutions to address.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2020

Q4FY20 Quarterly Report. LL20-AM-sensor

Tardigrade is an effort to create tunable thermal expansion materials for use in a ruggedized lens housing. This requires new computational algorithms to model and predict thermal performance of meta-materials composed of multiple structured base materials and void-space, along with matching and developing 3D print technology to demonstrate the housing. Project is 13 months into the 30 month on complete project plan. We are continuing effort on 3 main technical thrusts: algorithm development, multi-material additive manufacturing process exploration, and sensor/optics design and engineering. In FY20 we underspent the initial budget, partly due to work restrictions from Covid-19 pandemic, but are working to make up lost time

42 ENGINEERING↗
DOE OSTI2022

A study of sacrificial mirrors for use prior to a laser wakefield accelerator driven by the Z-Petawatt laser

Many experiments at Sandia’s Z Pulsed Power Facility require x-ray backlighting diagnostics to understand experiment performance. Due to limitations in present-day source/detection modalities, most x-ray diagnostics at Z are restricted to photon energies <20 keV, ultimately limiting the density, amount, and atomic number of targets diagnosable in experiments. These limitations force the use of low-Z materials like Beryllium, and they prevent acquisition of important backlighting data for materials/densities that are opaque to soft x-rays and where background emission from the Z load and transmission lines overwhelm diagnostics. In this LDRD project, we have investigated the design and development of a laser wakefield acceleration platform driven by the Z-Petawatt laser – a platform that would enable the generation of a pulsed, collimated beam of high energy x-rays up to 100 keV. Geometrical considerations for implementation on the Z Machine require the use of sacrificial mirrors, which have been tested in offline experiments in the Chama target chamber in building 983. Our results suggest the use of sacrificial mirrors would not necessarily inhibit the laser wakefield x-ray process, particularly with the benefits stemming from planned laser upgrades. These conclusions support the continuation of laser wakefield source research and the development of the necessary infrastructure to deliver the Z-Petawatt laser to the Z center section along the appropriate lines of sight. Ultimately, this new capability will provide unprecedented views through dense states of matter, enabling the use of previously incompatible target materials/designs, and uncovering a new set of observables accessible through diffraction and spectroscopy in the hard x-ray regime. These will amplify the data return on precious Z shots and enhance Sandia’s ability to investigate fundamental physics in support of national security.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Integrated Capture and Conversion of CO 2 to Methanol (ICCCM) Process Technology - CRADA 449 (Final Report)

The goal of this project is to develop a prototype system that integrates the capture and catalytic hydrogenation of CO 2 into methanol in the same solvent. Ultimately, this integrated approach could provide a technology with projected reductions to capital and operating costs by at least 20% relative to a benchmark methanol synthesis via gas-phase CO 2 hydrogenation. There were five primary objectives for the project: 1. Optimize the selections of both the catalysts and the CO 2 capture solvents to achieve high conversion (>80%) and high selectivity (>90%) toward methanol in the targeted processing ranges (100-180°C, 1-60 bar). 2. Design a reactor system that provides a fixed catalyst surface area and high-efficiency heat exchange to assure compact modular processing. 3. Build and test a reactor system and demonstrate in a bench scale continuous flow system, and use the operating data to refine the comparison to existing conversion technologies. 4. Refine techno economic (TEA) and Tech-to-Market (TTM) analyses using the experimental data obtained from the bench-scale system. 5. Use the experimental data and TEA/TTM projections to develop a conceptual design for a pre-commercial system that targets a specific market opportunity.

09 BIOMASS FUELS↗
DOE OSTI2023

The Mu2e Experiment at Fermilab

The Muon-to-Electron-Conversion (Mu2e) Experiment is a high-precision, intensity-frontier experiment being developed at Fermilab that will search for coherent, neutrino-less muon to electron conversion in the presence of an atomic nucleus. Such a process would exhibit charged lepton flavor violation (CLFV), which has not yet been observed. Continuing the search for CLFV, Mu2e will improve the sensitivity by four orders of magnitude over the present limits. In the search for beyond the standard model (BSM) physics, Mu2e is uniquely sensitive to a wide range of models by indirectly probing mass scales up to the energy scale of 10^4 TeV. While muon-to-electron-conversion is permissible in an extension of the standard model through neutrino oscillations, the rate is extremely low at about one event in 10^52. By design, the background for the experiment will be well-understood and kept at a sub-event level, which will mean the observation of muon-to-electron conversion is a dire ct confirmation of BSM physics. The physics motivation, the design, and the current status of the experiment will be presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Ply Strength Prediction of Unidirectional Continuous Carbon Fiber Composites

As inhomogeneous orthotropic materials, composite mechanical properties can be difficult to predict. Even with tight fabrication process controls, there is always some microstructural variation that will affect these properties. As a highly defect-dependent phenomena, mechanical strength is even more subject to variation, especially considering that composites exhibit multiple potential failure modes. The most direct way to determine composite material strength is via experimental testing, maintaining loading and specimen morphology as close as possible to the in situ states. When multiple materials and designs are being considered, this process is often prohibitively costly and slow. However, some approximations and rules of thumb can consistently guide the design process and consideration of alternatives.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Transmission Line Based Sensor Design for FMCW Radar Processing of Collision Damage

This report presents a framework for transmission line ( T-L ) sensor design in Frequency Modulated Continuous Wave (FMCW) radar applications, with particular emphasis on modeling collision damage effects. Classical electromagnetic (EM) propagation theory is combined with impact mechanics to develop a model for analyzing transmission line behavior as a sensor under high-velocity impact conditions. The framework includes detailed mathematical derivations, spatial and temporal damage evolution models, and practical implementation considerations.

42 ENGINEERING↗
DOE OSTI2025

Towards a Robust Adaptive Digital Twin for Fusion Applications

The development of a digital twin system for fusion applications is essential for enhancing the prediction, analysis, and optimization of complex plasma processes. Machine learning (ML), particularly deep learning has demonstrated strong capabilities in modeling such highly nonlinear and intricate systems. However, two critical challenges limit the deployment of deep learning-based digital twins: Uncertainty Quantification (UQ) and data drift. UQ is vital for ensuring trustworthy predictions, especially in decision-support scenarios. Additionally, data-driven models are often sensitive to changes in the underlying data distribution, such as shot-to-shot variations in fusion experiments, which can lead to performance degradation over time. To address these challenges, we are developing an uncertainty-aware, adaptive digital twin framework. Our approach incorporates deep learning models enhanced with Gaussian Process approximations for predictive uncertainty estimation, coupled with an online learning mechanism that enables continuous model adaptation to new experimental data. This adaptive capability allows the data driven models to respond effectively to evolving plasma behaviors and equipment conditions. Specifically, to mitigate the effects of shot-to-shot drift, our system updates itself incrementally as new data becomes available, improving both robustness and fidelity. Our vision is to evolve this data driven model into a self-sustaining digital twin system that leverages UQ based feedback to continuously refine itself and potentially support real-time decision making. This presentation will cover a brief background on uncertainty quantification for ML, our ongoing effort on development of UQ capabilities for ML, our data science pipeline from data collection to model development and analysis and online learning framework for modeling coil deflection at DIII-D. I will also briefly touch upon opportunities and challenges in development of digital twin framework.

Sammuli, Brian [General Atomics]↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence R - Raw Data

Sequence R: Step AOA, No Probes (P) This sequence was designed to quantify the effect of the five-hole probes on the 3-D blade static angle-of-attack response in the presence of rotational influences by repeating Sequence K without five-hole probes. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speeds ranged from 6 m/s to 20 m/s, and data were collected at yaw angles of 0° and 30°. The rotor rotated at 72 RPM. Blade pressure measurements were collected. The five-hole probes were removed and the plugs were installed. Plastic tape 0.03-mm-thick was used to smooth the interface between the plugs and the blade. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. During post-processing, the probe channels were set to read –99999.99. The blade pitch angle ramped continuously at 0.18°/s over a wide range of increasing and decreasing pitch angles. A step sequence was also performed. The blade pitch was stepped 5°; the flow was allowed to stabilize; and the pitch angle was held for 5 seconds. Then the pitch angle step was repeated. Again, a wide range of pitch angles was obtained, both increasing and decreasing. The file lengths for this sequence varied from 96 seconds to 6 minutes, depending on the pitch angle range. Some short points were collected at 0° yaw and 3° pitch to ascertain the functionality of the instrumentation and repeatability over time. The file name convention used the initial letter R, followed by two digits specifying wind speed, followed by two digits for yaw angle, followed by RU, RD, or ST, followed by the repetition digit. The angle of attack motion was differentiated by RU (ramp up), RD (ramp down), and ST (step down, then step up). This sequence is related to Sequences K and L.

17 WIND ENERGY↗
DOE OSTI2020

Quantum Monte Carlo Methods for Astrophysical Applications

In recent years, new astrophysical observations have provided a wealth of exciting input for nuclear physics. For example, the observations of two-solar-mass neutron stars put strong constraints on possible phase transitions to exotic phases in strongly interacting matter at high densities. Furthermore, the recent observation of a neutron-star merger in both the electromagnetic spectrum and gravitational waves has provided compelling evidence that neutron-star mergers are an important site for the production of extremely neutron-rich nuclei within the r-process. In the coming years, an abundance of new observations is expected, which will continue to provide crucial constraints on the nuclear physics of these events. To reliably analyze such astrophysical observations and extract information on nuclear physics, it is very important that a consistent approach to nuclear systems is used. Such an approach consists of a precise and accurate method to solve the nuclear many-body problem in nuclei and nuclear matter, combined with modern nuclear Hamiltonians that allow to estimate the theoretical uncertainties. Quantum Monte Carlo methods are ideally suited for such an approach and have been successfully used to describe atomic nuclei and nuclear matter. In this contribution, I will present a detailed description of Quantum Monte Carlo methods focusing on the application of these methods to astrophysical problems. In particular, I will discuss how to use Quantum Monte Carlo methods to describe nuclear matter of relevance to the physics of neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Closed-Form Solutions for the Equations of Motion of the Heavy Symmetrical Top with One Point Fixed

The equations of motion (EOM) for the heavy symmetrical top with one point fixed are highly nonlinear. The literature describes the numerical methods that are used to resolve this classical system, including modern tools, such as the Runge–Kutta fourth–order method. Finding the derivate of closed-form solutions for the EOM is more difficult and, as mentioned in the literature, discovering the solution is not always possible for all the EOM. Fortunately, a few examples are available that serve as a guide to move further in this topic. The purpose of this paper is to find a methodology that will produce the solutions for a given subset of EOMs that fulfill certain requisites. This paper summarizes the literature available on this topic and then follows with the derivation of the EOM using the Euler–Lagrange method. The Routhian method will be used to reduce the size of the expression, and it continues with the formulation of the classical cubic function, ƒ(u), through a novel process. The roots of ƒ(u) are of the utmost importance in finding the EOM closed-form solution, and once the final roots are selected, the general method that will produce the closed-form solutions is presented. Two sets of examples are included to show the validity of the process, and comparisons of the results from the closed-form solutions vs. the numerical results for these examples are shown.

Laos, Hector↗
DOE OSTI2022

Sustainable Aviation Fuel via Hydroprocessing of Catalytic Fast Pyrolysis Oil

Cycloalkanes have been identified as a promising alternative for sustainable aviation fuel (SAF) in a recent US Department of Energy Review of Technical Pathways to SAF. Cycloalkanes can provide desirable SAF properties, including energy density, and, in addition, they may be able to provide necessary seal swelling and leakage protection and replace undesirable aromatics in aviation fuel. Catalytic fast pyrolysis (CFP) followed by hydroprocessing constitutes a platform well suited for converting biomass to cycloalkanes. CFP oils are rich in phenolic compounds and, depending on CFP catalyst, in aromatic hydrocarbons, which can both be hydrogenated to form cycloalkanes. In this work, we report results from hydroprocessing of two types of CFP oil to produce fractions boiling in the sustainable aviation fuel range and meeting tested aviation fuel specifications. CFP oils prepared over a zeolite catalyst (ZSM-5) and a hydrodeoxygenation catalyst (Pt/TiO2) were hydroprocessed over a sulfided NiMo/Al2O3 catalyst in a two-stage process (1st stage ~250 degrees C and 2nd stage 385 degrees C) in a continuous trickle-bed hydrotreater. The hydrotreated product contained 39-40% material boiling in the SAF range by distillation with a carbon efficiency of 36-37% from CFP oil to SAF fraction. The SAF fractions consisted of 82-87% of cycloalkanes, had non-detectable oxygen contents and lower heating values (LHV) above the jet fuel minimum limit of 42.8 MJ/kg. The SAF-range product also had acceptable volatility and freeze and flash points per aviation fuel specifications. The results suggest a promising pathway for SAF production via the catalytic fast pyrolysis pathway. Methods to enhance the yield of SAF will be discussed.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗
DOE OSTI2026

Best Practices for Regulatory Engagement and Relationship Building – 26129

In the initiation of a new project or facility, the management team should begin to engage with appropriate regulators, early and often. However, if this did not occur and new issues arise, new challenges develop, or regulatory impacts become a concern, the regulatory engagement process should be reconsidered and reevaluated. Regulators are key in the siting, construction, and continued operations of a new facility. Municipalities often seek to attract new initiatives, projects, or facilities that will have a significant positive impact on the community. Even though this is typically the goal, there are many hurdles along the path that may cause negative impacts leading to regulatory concerns and hurdles that may delay or stop work. Additionally, early and frequent engagement with regulators can have a significant positive impact on the successful siting, permitting, and construction of a facility, including meeting needed schedules that are important to economic viability. Further, it is essential for ongoing operations for regulators to be effectively and meaningfully engaged throughout the life of the project or facility due to the potential of changing factors during the construction and/or operation. Regular and consistent engagement builds relationships and helps ensure that potential topics of concern are addressed early before they become problems. In this paper, we will discuss best practices in engaging with regulators, how to initiate effective regulatory interactions, and building lasting relationships.

Jacobs, Stephanie [Savannah River National Laborat↗
DOE OSTI2024

Brochure on the 2024 ASCR Workshop on Analog Computing for Science

Analog computing fundamentally differs from digital by representing data with fully continuous physical quantities, such as voltages, probabilities, chemical concentrations, or light intensities, rather than encoding values in discrete binary states. While digital computing has historically excelled in precision, scalability, and noise resistance, newer analog approaches are gaining interest for their potential to dramatically improve energy efficiency and processing speed. Analog systems can inherently solve mathematical problems through their physical behavior and offer distinct advantages in scenarios where continuous operations are more effective than Boolean logic.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Integrating continuous atmospheric boundary layer and tower-based flux measurements to advance understanding of land-atmosphere interactions

The atmospheric boundary layer mediates the exchange of energy, matter, and momentum between the land surface and the free troposphere, integrating a range of physical, chemical, and biological processes and is defined as the lowest layer of the atmosphere (ranging from a few meters to 3 km). In this review, we investigate how continuous, automated observations of the atmospheric boundary layer can enhance the scientific value of co-located eddy covariance measurements of land-atmosphere fluxes of carbon, water, and energy, as are being made at FLUXNET sites worldwide. We highlight four key opportunities to integrate tower-based flux measurements with continuous, long-term atmospheric boundary layer measurements: (1) to interpret surface flux and atmospheric boundary layer exchange dynamics and feedbacks at flux tower sites, (2) to support flux footprint modelling, the interpretation of surface fluxes in heterogeneous terrain, and quality control of eddy covariance flux measurements, (3) to support regional-scale modeling and upscaling of surface fluxes to continental scales, and (4) to quantify land-atmosphere coupling and validate its representation in Earth system models. Adding a suite of atmospheric boundary layer measurements to eddy covariance flux tower sites, and supporting the sharing of these data to tower networks, would allow the Earth science community to address new emerging research questions, better interpret ongoing flux tower measurements, and would present novel opportunities for collaborations between FLUXNET scientists and atmospheric and remote sensing scientists.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Comparison of Thin Film Heat Flux Gauge Technologies Emphasizing Continuous-Duration Operation

Abstract Thin-film heat flux gauges (HFGs) have been used for decades to measure surface temperatures and heat flux in test turbines with the majority being used in facilities that are short-duration. These gauges are typically composed of two resistive temperature devices deposited on opposing sides of a dielectric. However, because these sensors have been traditionally applied for measurements in transient-type facilities, the challenges facing adaptation of this technology for a steady facility warrant investigation. These challenges are highlighted, and the solutions are presented throughout the paper. This paper describes the nanofabrication process for heat flux gauges and a new calibration method to address the potential deterioration of gauges over long runtimes in continuous-duration facilities. Because the primary uncertainty of these sensors arises from the ambiguity of the thermal properties, the emphasis is placed on the property determination. Also, this paper presents a discussion on the use of impulse response theory to process the data showing the feasibility of the method for steady-duration facilities after an initial settling time. The latter portion of the paper focuses on comparing well-established heat flux gauges developed for short-duration turbine test facilities to recently developed gauges fabricated using modern nanofabrication techniques for a continuous turbine test facility. The gauges were compared using the test case of an impinging jet over a range of Reynolds numbers. The comparison between the PSU gauge and the reference device indicated agreement within 14%, and similar results were achieved through comparison with established sensors from partner institutions.

Engineering↗
DOE OSTI2020

Accelerating Scientific Computing in the Post-Moore’s Era

Novel uses of graphical processing units for accelerated computation revolutionized the field of high-performance scientific computing by providing specialized workflows tailored to algorithmic requirements. As the era of Moore’s law draws to a close, many new non–von Neumann processors are emerging as potential computational accelerators, including those based on the principles of neuromorphic computing, tensor algebra, and quantum information. While development of these new processors is continuing to mature, the potential impact on accelerated computing is anticipated to be profound. We discuss how different processing models can advance computing in key scientific paradigms: machine learning and constraint satisfaction. Significantly, each of these new processor types utilizes a fundamentally different model of computation, and this raises questions about how to best use such processors in the design and implementation of applications. While many processors are being developed with a specific domain target, the ubiquity of spin-glass models and neural networks provides an avenue for multi-functional applications. Furthermore, this also hints at the infrastructure needed to integrate next-generation processing units into future high-performance computing systems.

97 MATHEMATICS AND COMPUTING↗