Search NASA⌕ Search

SEARCH · Search NASA

Results for “dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Perpendicular diffusion of energetic particles: Numerical test of the theorem on reduced dimensionality

A fundamental statement in diffusion theory is provided by the so-called theorem on reduced dimensionality. The latter theorem is saying that if the dimensionality of the turbulence is reduced, charged particles are tied to a single magnetic field line. If there is pitch-angle scattering and therewith parallel diffusion, this usually means that perpendicular transport is subdiffusive. Subdiffusive transport was found in numerous simulations for slab turbulence. However, it was unclear whether the theorem is valid for other models with reduced dimensionality such as the two-dimensional model. In the current paper, we simultaneously trace magnetic field lines and energetic particles and we compute the distance between the particle and the initial field line. We confirm the aforementioned theorem for slab turbulence but we cannot confirm it for two-dimensional turbulence. We also show that particles are not tied to field lines for two-component turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Layer-dependent topological phase in a two-dimensional quasicrystal and approximant

The electronic and topological properties of materials are derived from the interplay between crystalline symmetry and dimensionality. Simultaneously introducing “forbidden” symmetries via quasiperiodic ordering with low dimensionality into a material system promises the emergence of new physical phenomena. Here, we isolate a two-dimensional (2D) chalcogenide quasicrystal and approximant, and investigate their electronic and topological properties. The 2D layers of the materials with a composition close to Ta 1.6 Te, derived from a layered transition metal dichalcogenide, are isolated with standard exfoliation techniques, and investigated with electron diffraction and atomic resolution scanning transmission electron microscopy. Density functional theory calculations and symmetry analysis of the large unit cell crystalline approximant of the quasicrystal, Ta 21 Te 13 , reveal the presence of symmetry-protected nodal crossings in the quasicrystalline and approximant phases, whose presence is tunable by layer number. Our study provides a platform for the exploration of physics in quasicrystalline, low-dimensional materials and the interconnected nature of topology, dimensionality, and symmetry in electronic systems.

36 MATERIALS SCIENCE↗

WHY ONE-DIMENSIONAL MODELS FAIL IN THE DIAGNOSIS OF AVERAGE SPECTRA FROM INHOMOGENEOUS STELLAR ATMOSPHERES

We investigate the feasibility of representing a structured multi-dimensional stellar atmosphere with a single one-dimensional average stratification for the purpose of spectral diagnosis of the atmosphere's average spectrum. In particular, we construct four different one-dimensional stratifications from a single snapshot of a magnetohydrodynamic simulation of solar convection: one by averaging its properties over surfaces of constant height and three by averaging over surfaces of constant optical depth at 500 nm. Using these models, we calculate continuum and atomic and molecular line intensities and their center-to-limb variations. From an analysis of the emerging spectra, we identify three main reasons why these average representations are inadequate for accurate determination of stellar atmospheric properties through spectroscopic analysis. These reasons are nonlinearity in the Planck function with temperature, which raises the average emergent intensity of an inhomogeneous atmosphere above that of an average-property atmosphere, even if their temperature-optical depth stratification is identical; nonlinearities in molecular formation with temperature and density, which raise the abundance of molecules of an inhomogeneous atmosphere over that in a one-dimensional model with the same average properties; and the anisotropy of convective motions, which strongly affects the center-to-limb variation of line-core intensities. We argue therefore that a one-dimensional atmospheric model that reproduces the mean spectrum of an inhomogeneous atmosphere necessarily does not reflect the average physical properties of that atmosphere and is therefore inherently unreliable.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-perturbative methodologies for low-dimensional strongly-correlated systems: From non-Abelian bosonization to truncated spectrum methods

We review two important non-perturbative approaches for extracting the physics of low-dimensional strongly correlated quantum systems. Firstly, we start by providing a comprehensive review of non-Abelian bosonization. This includes an introduction to the basic elements of conformal field theory as applied to systems with a current algebra, and we orient the reader by presenting a number of applications of non-Abelian bosonization to models with large symmetries. We then tie this technique into recent advances in the ability of cold atomic systems to realize complex symme-tries. Secondly, we discuss truncated spectrum methods for the numerical study of systems in one and two dimensions. For one-dimensional systems we provide the reader with considerable insight into the methodology by reviewing canonical applications of the technique to the Ising model (and its variants) and the sine-Gordon model. Following this we review recent work on the development of renormalization groups, both numerical and analytical, that alleviate the effects of truncating the spectrum. Using these technologies, we consider a number of applications to one-dimensional systems: properties of carbon nanotubes, quenches in the Lieb-Liniger model, 1+1D quantum chro-modynamics, as well as Landau-Ginzburg theories. In the final part we move our attention to consider truncated spectrum methods applied to two-dimensional systems. This involves combining truncated spectrum methods with matrix product state algorithms. Lastly, we describe applications of this method to two-dimensional systems of free fermions and the quantum Ising model, including their non-equilibrium dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Goldilocks models of higher-dimensional inflation (including modulus stabilization)

We explore the mechanics of inflation within simplified extra-dimensional models involving an inflaton interacting with the Einstein-Maxwell system in two extra dimensions. The models are Goldilocks-like inasmuch as they are just complicated enough to include a mechanism to stabilize the extra-dimensional size (or modulus), yet simple enough to solve explicitly the full extra-dimensional field equations using only simple tools. The solutions are not restricted to the effective 4D regime with H || m {sub KK} (the latter referring to the characteristic mass splitting of the Kaluza-Klein excitations) because the full extra-dimensional Einstein equations are solved. This allows an exploration of inflationary physics in a controlled calculational regime away from the usual four-dimensional lamp-post. The inclusion of modulus stabilization is important because experience with string models teaches that this is usually what makes models fail: stabilization energies easily dominate the shallow potentials required by slow roll and so open up directions to evolve that are steeper than those of the putative inflationary direction. We explore (numerically and analytically) three representative kinds of inflationary scenarios within this simple setup. In one the radion is trapped in an inflaton-dependent local minimum whose non-zero energy drives inflation. Inflation ends as this energy relaxes to zero when the inflaton finds its own minimum. The other two involve power-law scaling solutions during inflation. One of these is a dynamical attractor whose features are relatively insensitive to initial conditions but whose slow-roll parameters cannot be arbitrarily small; the other is not an attractor but can roll much more slowly, until eventually transitioning to the attractor. The scaling solutions can satisfy H > m {sub KK}, but when they do standard 4D fluctuation calculations need not apply. When in a 4D regime the solutions predict η ≅ 0 and so r ≅ 0.11 when n {sub s} ≅ 0.96 and so are ruled out if tensor modes remain unseen. Assessment of general parameters is difficult until a full 6D fluctuation calculation is done.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scalable high-rate, high-dimensional time-bin encoding quantum key distribution

We propose and experimentally demonstrate a new scheme for measuring high-dimensional phase states using a two-photon interference technique, which we refer to as quantum-controlled measurement. Using this scheme, we implement a d -dimensional time-phase quantum key distribution (QKD) system and achieve secret key rates of 5.26 and 8.65 Mbps using d = 2 and d = 8 quantum states, respectively, for a 4 dB channel loss, illustrating that high-dimensional time-phase QKD protocols are advantageous for low-loss quantum channels. Here, this work paves the way for practical high-dimensional QKD protocols for metropolitan-scale systems. Furthermore, our results apply equally well for other high-dimensional protocols, such as those using the spatial degree-of-freedom with orbital angular momentum states being one example.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Five-dimensional metric f(R) gravity and the accelerated universe

The metric f(R) theories of gravity are generalized to five-dimensional spacetimes. By assuming a hypersurface-orthogonal Killing vector field representing the compact fifth dimension, the five-dimensional theories are reduced to their four-dimensional formalism. Then we study the cosmology of a special class of f(R)={alpha}R{sup m} models in a spatially flat Friedmann-Robertson-Walker spacetime. It is shown that the parameter m can be constrained to a certain range by the current observed deceleration parameter, and its lower bound corresponds to the Kaluza-Klein theory. It turns out that both expansion and contraction of the extra dimension may prescribe the smooth transition from the deceleration era to the acceleration era in the recent past as well as an accelerated scenario for the present Universe. Hence, five-dimensional f(R) gravity can naturally account for the present accelerated expansion of the Universe. Moreover, the models predict a transition from acceleration to deceleration in the future, followed by a cosmic recollapse within finite time. This differs from the prediction of the five-dimensional Brans-Dicke theory but is inconsistent with a recent prediction based on loop quantum cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Three-dimensional nanostructure determination from a large diffraction data set recorded using scanning electron nanodiffraction

A diffraction-based technique is developed for the determination of three-dimensional nanostructures. The technique employs high-resolution and low-dose scanning electron nanodiffraction (SEND) to acquire three-dimensional diffraction patterns, with the help of a special sample holder for large-angle rotation. Grains are identified in three-dimensional space based on crystal orientation and on reconstructed dark-field images from the recorded diffraction patterns. Application to a nanocrystalline TiN thin film shows that the three-dimensional morphology of columnar TiN grains of tens of nanometres in diameter can be reconstructed using an algebraic iterative algorithm under specified prior conditions, together with their crystallographic orientations. The principles can be extended to multiphase nanocrystalline materials as well. Thus, the tomographic SEND technique provides an effective and adaptive way of determining three-dimensional nanostructures.

36 MATERIALS SCIENCE↗

SU-E-CAMPUS-T-03: Four-Dimensional Dose Distribution Measurement Using Plastic Scintillator

Purpose: To develop the detector for the four-dimensional dose distribution measurement. Methods: We made the prototype detector for four-dimensional dose distribution measurement using a cylindrical plastic scintillator (5 cm diameter) and a conical reflection grass. The plastic scintillator is used as a phantom. When the plastic scintillator is irradiated, the scintillation light was emitted according to absorbed dose distribution. The conical reflection grass was arranged to surround the plastic scintillator, which project to downstream the projection images of the scintillation light. Then, the projection image was reflected to 45 degree direction by flat reflection grass, and was recorded by camcorder. By reconstructing the three-dimensional dose distribution from the projection image recorded in each frame, we could obtain the four-dimensional dose distribution. First, we tested the characteristic according to the amount of emitted light. Then we compared of the light profile and the dose profile calculated with the radiotherapy treatment planning system. Results: The dose dependency of the amount of light showed linearity. The pixel detecting smaller amount of light had high sensitivity than the pixel detecting larger amount of light. However the difference of the sensitivity could be corrected from the amount of light detected in each pixel. Both of the depth light profile through the conical reflection grass and the depth dose profile showed the same attenuation in the region deeper than peak depth. In lateral direction, the difference of the both profiles was shown at outside field and penumbra region. We consider that the difference is occurred due to the scatter of the scintillation light in the plastic scintillator block. Conclusion: It was possible to obtain the amount of light corresponding to the absorbed dose distribution from the prototype detector. Four-dimensional dose distributions can be reconstructed with high accuracy by the correction of the scattered light.

07 ISOTOPE AND RADIATION SOURCES↗

Experimental determination of the electron effective masses and mobilities in each dimensionally-quantized subband in an In{sub x}Ga{sub 1−x}As quantum well with InAs inserts

HEMT structures with In{sub 0.53}Ga{sub 0.47}As quantum well are synthesized using molecular-beam epitaxy on InP substrates. The structures are double-side Si δ-doped so that two dimensionally-quantized subbands are occupied. The effect of the central InAs nanoinsert in the quantum well on the electron effective masses m* and mobilities in each subband is studied. For experimental determination of m*, the quantum μ{sub q} and transport μ{sub t} mobilities of the two-dimensional electron gas in each dimensionally-quantized subband, the Shubnikov-de Haas effect is measured at two temperatures of 4.2 and 8.4 K. The electron effective masses are determined by the temperature dependence of the oscillation amplitudes, separating the oscillations of each dimensionally-quantized subband. The Fourier spectra of oscillations are used to determine the electron mobilities μ{sub q} and μ{sub t} in each dimensionally-quantized subband. It is shown that m* decreases as the InAs-nanoinsert thickness d in the In{sub 0.53}Ga{sub 0.47}As quantum well and electron mobilities increase. The maximum electron mobility is observed at the insert thickness d = 3.4 nm.

36 MATERIALS SCIENCE↗

Three-dimensional tori and Arnold tongues

This study analyzes an Arnold resonance web, which includes complicated quasi-periodic bifurcations, by conducting a Lyapunov analysis for a coupled delayed logistic map. The map can exhibit a two-dimensional invariant torus (IT), which corresponds to a three-dimensional torus in vector fields. Numerous one-dimensional invariant closed curves (ICCs), which correspond to two-dimensional tori in vector fields, exist in a very complicated but reasonable manner inside an IT-generating region. Periodic solutions emerge at the intersections of two different thin ICC-generating regions, which we call ICC-Arnold tongues, because all three independent-frequency components of the IT become rational at the intersections. Additionally, we observe a significant bifurcation structure where conventional Arnold tongues transit to ICC-Arnold tongues through a Neimark-Sacker bifurcation in the neighborhood of a quasi-periodic Hopf bifurcation (or a quasi-periodic Neimark-Sacker bifurcation) boundary.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THREE-DIMENSIONAL HYDRODYNAMIC CORE-COLLAPSE SUPERNOVA SIMULATIONS FOR AN 11.2 M{sub Sun} STAR WITH SPECTRAL NEUTRINO TRANSPORT

We present numerical results on three-dimensional (3D) hydrodynamic core-collapse simulations of an 11.2 M{sub Sun} star. By comparing one-dimensional (1D) and two-dimensional (2D) results with those of 3D, we study how the increasing spacial multi-dimensionality affects the postbounce supernova dynamics. The calculations were performed with an energy-dependent treatment of the neutrino transport that is solved by the isotropic diffusion source approximation scheme. In agreement with previous study, our 1D model does not produce explosions for the 11.2 M{sub Sun} star, while the neutrino-driven revival of the stalled bounce shock is obtained in both the 2D and 3D models. The standing accretion-shock instability (SASI) is observed in the 3D models, in which the dominant mode of the SASI is bipolar (l = 2) with its saturation amplitudes being slightly smaller than 2D. By performing a tracer-particle analysis, we show that the maximum residency time of material in the gain region becomes longer in 3D than in 2D due to non-axisymmetric flow motions, which is one of advantageous aspects of 3D models to obtain neutrino-driven explosions. Our results show that convective matter motions below the gain radius become much more violent in 3D than in 2D, making the neutrino luminosity larger for 3D. Nevertheless, the emitted neutrino energies are made smaller due to the enhanced cooling. Our results indicate whether these advantages for driving 3D explosions could or could not overwhelm the disadvantages is sensitive to the employed numerical resolutions. An encouraging finding is that the shock expansion tends to become more energetic for models with finer resolutions. To draw a robust conclusion, 3D simulations with much higher numerical resolutions and with more advanced treatment of neutrino transport and of gravity are needed, which could be practicable by utilizing forthcoming Petaflops-class supercomputers.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymptotic symmetries of three dimensional gravity and the membrane paradigm

The asymptotic symmetry group of three-dimensional (anti) de Sitter space with Brown-Henneaux boundary conditions is the two dimensional conformal group with central charge c = 3 ℓ/ 2 G . Usually the asymptotic charge algebra is derived using the symplectic structure of the bulk Einstein equations. Here, we derive the asymptotic charge algebra by a different route. First, we formulate the dynamics of the boundary as a 1+1-dimensional dynamical system. Then we realize the boundary equations of motion as a Hamiltonian system on the dual Lie algebra, \( {\mathfrak{g}}^{\ast } \) , of the two-dimensional conformal group. Finally, we use the Lie-Poisson bracket on \( {\mathfrak{g}}^{\ast } \) to compute the asymptotic charge algebra. This streamlines the derivation of the asymptotic charge algebra because the Lie-Poisson bracket on the boundary is significantly simpler than the symplectic structure derived from the bulk Einstein equations. It also clarifies the analogy between the infinite dimensional symmetries of gravity and fluid dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Visualization and efficient generation of constrained high-dimensional theoretical parameter spaces

We describe a set of novel methods for efficiently sampling high-dimensional parameter spaces of physical theories defined at high energies, but constrained by experimental measurements made at lower energies. Often, theoretical models such as supersymmetry are defined by many parameters, $\mathcal{O}$(10 – 100), expressed at high energies, while relevant experimental constraints are often defined at much lower energies, preventing them from directly ruling out portions of the space. Instead, the low-energy constraints define a complex, potentially non-contiguous subspace of the theory parameters. Naive scanning of the theory space for points which satisfy the low-energy constraints is hopelessly inefficient due to the high dimensionality, and the inverse problem is considered intractable. As a result, many theoretical spaces remain under-explored. We introduce a class of modified generative autoencoders, which attack this problem by mapping the high-dimensional parameter space to a structured low-dimensional latent space, allowing for easy visualization and efficient generation of theory points which satisfy experimental constraints. An extension without dimensional compression, which focuses on limiting potential information loss, is also introduced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Dimensional Intrinsic Interpolation Using Gaussian Process Regression and Diffusion Maps

This article considers the challenging task of estimating geologic properties of interest using a suite of proxy measurements. The current work recast this task as a manifold learning problem. In this process, this article introduces a novel regression procedure for intrinsic variables constrained onto a manifold embedded in an ambient space. The procedure is meant to sharpen high-dimensional interpolation by inferring non-linear correlations from the data being interpolated. The proposed approach augments manifold learning procedures with a Gaussian process regression. It first identifies, using diffusion maps, a low-dimensional manifold embedded in an ambient high-dimensional space associated with the data. It relies on the diffusion distance associated with this construction to define a distance function with which the data model is equipped. This distance metric function is then used to compute the correlation structure of a Gaussian process that describes the statistical dependence of quantities of interest in the high-dimensional ambient space. The proposed method is applicable to arbitrarily high-dimensional data sets. Here, it is applied to subsurface characterization using a suite of well log measurements. The predictions obtained in original, principal component, and diffusion space are compared using both qualitative and quantitative metrics. Considerable improvement in the prediction of the geological structural properties is observed with the proposed method.

58 GEOSCIENCES↗

Data Mining and Visualization of High-Dimensional ICME Data for Additive Manufacturing

Integrated computational materials engineering (ICME) methods combining CALPHAD with process-based simulations can produce rich, high-dimensional data for alloy and process design. In ICME methods for metallurgical applications, the visualization and interpretation of such high-dimensional data has previously been through heat maps represented in 2 or 3 dimensions. While such an approach is ideal when one variable is varied at a time, in the case of high-dimensional data with multiple variables varied simultaneously, as is the case in additive manufacturing, interpreting the trends through two- or three-dimensional heat maps becomes challenging. Here, we propose a strategy of mixed visual data mining and quantitative analysis for high-dimensional metallurgical and process data using high-throughput thermodynamic calculations. Two case studies show the application of the proposed approach. The first case study investigated the effects of feedstock chemistry on the δ ferrite formation in 316L stainless steel powders used for binder jet additive manufacturing. The second case study linked Scheil–Gulliver calculations to a process model for dissimilar joining of aluminum alloys 5356 and 6111 during laser hot-wire additive manufacturing. Both cases contained thousands of calculated data points, showcasing the utility of visual data analysis through parallel coordinate plotting, Pearson correlation coefficient matrices, and scatter matrices compared to traditional process maps. These visualization techniques can be extended to many additive manufacturing problems to capture process–structure–property relationships for additively manufactured components.

36 MATERIALS SCIENCE↗

Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions

High purity single crystal titanium (Ti) under shock wave loading is modeled under both one-dimensional and three-dimensional cylindrical conditions. Cylinder sizes of 10 μm and 20 μm radius are both considered in order to assess influence of boundary conditions. A thermodynamically consistent single crystal model for application to shock conditions is presented. The model accounts for the coupled non-linear elastic, dislocation slip, deformation twinning, and structural phase transformation response of the titanium material. Plate impact experiment results using a copper flyer are used to compare against the simulations for crystals oriented in [0001] and [10$\overline1$1] crystallographic directions. The one-dimensional and threedimensional simulations of the two differently oriented single crystals indicate differences between the one-dimensional and three-dimensional representation, especially for the [10$\overline1$1] oriented single crystal. This orientation breaks the relative orientation symmetry between the crystal and cylinder which otherwise exists for the [0001] oriented single crystal. A significant amount of heterogeneity in the field response of the[10$\overline1$1] oriented simulation was demonstrated due to the highly coupled nature of the deformation. A bi-crystal model composed of both the [0001] and [10$\overline1$1] orientations with the boundary between the two along the axis of the cylinder is also considered for a cylinder model size of 10 μm. The results indicate a strong interaction between the two grains that affects the ω phase volume fraction achieved relative to the single crystal calculations.

36 MATERIALS SCIENCE↗

On-Line Use of Three-Dimensional Marker Trajectory Estimation From Cone-Beam Computed Tomography Projections for Precise Setup in Radiotherapy for Targets With Respiratory Motion

Purpose: To develop and evaluate accurate and objective on-line patient setup based on a novel semiautomatic technique in which three-dimensional marker trajectories were estimated from two-dimensional cone-beam computed tomography (CBCT) projections. Methods and Materials: Seven treatment courses of stereotactic body radiotherapy for liver tumors were delivered in 21 fractions in total to 6 patients by a linear accelerator. Each patient had two to three gold markers implanted close to the tumors. Before treatment, a CBCT scan with approximately 675 two-dimensional projections was acquired during a full gantry rotation. The marker positions were segmented in each projection. From this, the three-dimensional marker trajectories were estimated using a probability based method. The required couch shifts for patient setup were calculated from the mean marker positions along the trajectories. A motion phantom moving with known tumor trajectories was used to examine the accuracy of the method. Trajectory-based setup was retrospectively used off-line for the first five treatment courses (15 fractions) and on-line for the last two treatment courses (6 fractions). Automatic marker segmentation was compared with manual segmentation. The trajectory-based setup was compared with setup based on conventional CBCT guidance on the markers (first 15 fractions). Results: Phantom measurements showed that trajectory-based estimation of the mean marker position was accurate within 0.3 mm. The on-line trajectory-based patient setup was performed within approximately 5 minutes. The automatic marker segmentation agreed with manual segmentation within 0.36 {+-} 0.50 pixels (mean {+-} SD; pixel size, 0.26 mm in isocenter). The accuracy of conventional volumetric CBCT guidance was compromised by motion smearing ({<=}21 mm) that induced an absolute three-dimensional setup error of 1.6 {+-} 0.9 mm (maximum, 3.2) relative to trajectory-based setup. Conclusions: The first on-line clinical use of trajectory estimation from CBCT projections for precise setup in stereotactic body radiotherapy was demonstrated. Uncertainty in the conventional CBCT-based setup procedure was eliminated with the new method.

62 RADIOLOGY AND NUCLEAR MEDICINE↗