Search NASA⌕ Search

SEARCH · Search NASA

Results for “dispersion function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Type I band alignment in GaAs{sub 81}Sb{sub 19}/GaAs core-shell nanowires

The composition and band gap of the shell that formed during the growth of axial GaAs/GaAs{sub 81}Sb{sub 19}/ GaAs heterostructure nanowires have been investigated by transmission electron microscopy combined with energy dispersion spectroscopy, scanning tunneling spectroscopy, and density functional theory calculations. On the GaAs{sub 81}Sb{sub 19} intermediate segment, the shell is found to be free of Sb (pure GaAs shell) and transparent to the tunneling electrons, despite the (110) biaxial strain that affects its band gap. As a result, a direct measurement of the core band gap allows the quantitative determination of the band offset between the GaAs{sub 81}Sb{sub 19} core and the GaAs shell and identifies it as a type I band alignment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab initio calculations of the optical properties of crystalline and liquid InSb

Ab initio calculations of the electronic and optical properties of InSb were performed for both the crystalline and liquid states. Two sets of atomic structure models for liquid InSb at 900 K were obtained by ab initio molecular dynamics simulations. To reduce the effect of structural peculiarities in the liquid models, an averaging of the two sets of the calculated electronic and optical properties corresponding to the two liquid models was performed. The calculated results indicate that, owing to the phase transition from crystal to liquid, the density of states around the Fermi level increases. As a result, the energy band gap opening near the Fermi level disappears. Consequently, the optical properties change from semiconductor to metallic behavior. Namely, owing to the melting of InSb, the interband transition peaks disappear and a Drude-like dispersion is observed in the optical dielectric functions. The optical absorption at a photon energy of 3.06 eV, which is used in Blu-ray Disc systems, increases owing to the melting of InSb. This increase in optical absorption is proposed to result from the increased optical transitions below 2 eV.

36 MATERIALS SCIENCE↗

Structure dependent electrical properties of Ni-Mg-Cu nano ferrites

Nano ferrites with the general chemical formula Ni{sub 0.5}Mg{sub x}Cu{sub 1-x} Fe{sub 2}O{sub 4} were synthesized by chemical route. They were characterized by x-ray diffraction by powder method. The diffraction patterns confirm the formation of single phase ferrites. The particle size is calculated by Scherrer formula which varies between 20nm to 60nm. DC resistivity was measured as a function of composition from room temperature to 700{sup o} C by two probe method. These ferrites show higher resistivity than those synthesized by ceramic method, due to control over composition and morphology. This leads to the elimination of domain wall resonance so that the materials can work at higher frequencies. AC resistivity was measured as a function of frequency at room temperature. Dielectric dispersion obeys Maxwell - Wagner model, in accordance with Koop’s phenomenological theory. The variation of loss angle follows the variation of ac resistivity with frequency and composition. The change in ac conductivity with frequency obeys the power law σ{sub a} = B.ω{sup n}. Such a behavior suggests that conductivity is due to polarons in all the samples.

36 MATERIALS SCIENCE↗

Multiple surface plasmons in an unbounded quantum plasma half-space

The propagation of surface plasmons on a quantum plasma half-space in the absence of any external confinement is investigated. By means of the Quantum Hydrodynamic Model in the electrostatic limit, it is found that the equilibrium density profile is a smooth continuous function which, in the linear regime, supports multiple non-normal surface modes. Defining a spectrum function and using a cutting condition, the dispersion relations of these modes and their relevance for realistic dynamics are computed. It is found that the multiple surface plasmons present a significant red-shift with respect to the case of fully bounded quantum plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First principles crystal engineering of nonlinear optical materials. I. Prototypical case of urea

The crystalline materials with nonlinear optical (NLO) properties are critically important for several technological applications, including nanophotonic and second harmonic generation devices. Urea is often considered to be a standard NLO material, due to the combination of non-centrosymmetric crystal packing and capacity for intramolecular charge transfer. Various approaches to crystal engineering of non-centrosymmetric molecular materials were reported in the literature. Here we propose using global lattice energy minimization to predict the crystal packing from the first principles. We developed a methodology that includes the following: (1) parameter derivation for polarizable force field AMOEBA; (2) local minimizations of crystal structures with these parameters, combined with the evolutionary algorithm for a global minimum search, implemented in program USPEX; (3) filtering out duplicate polymorphs produced; (4) reoptimization and final ranking based on density functional theory (DFT) with many-body dispersion (MBD) correction; and (5) prediction of the second-order susceptibility tensor by finite field approach. This methodology was applied to predict virtual urea polymorphs. After filtering based on packing similarity, only two distinct packing modes were predicted: one experimental and one hypothetical. DFT + MBD ranking established non-centrosymmetric crystal packing as the global minimum, in agreement with the experiment. Finite field approach was used to predict nonlinear susceptibility, and H-bonding was found to account for a 2.5-fold increase in molecular hyperpolarizability to the bulk value.

36 MATERIALS SCIENCE↗

TURBULENCE SETS THE INITIAL CONDITIONS FOR STAR FORMATION IN HIGH-PRESSURE ENVIRONMENTS

Despite the simplicity of theoretical models of supersonically turbulent, isothermal media, their predictions successfully match the observed gas structure and star formation activity within low-pressure (P/k < 10{sup 5} K cm{sup –3}) molecular clouds in the solar neighborhood. However, it is unknown whether or not these theories extend to clouds in high-pressure (P/k > 10{sup 7} K cm{sup –3}) environments, like those in the Galaxy's inner 200 pc central molecular zone (CMZ) and in the early universe. Here, we present Atacama Large Millimeter/submillimeter Array 3 mm dust continuum emission within a cloud, G0.253+0.016, which is immersed in the high-pressure environment of the CMZ. While the log-normal shape and dispersion of its column density probability distribution function (PDF) are strikingly similar to those of solar neighborhood clouds, there is one important quantitative difference: its mean column density is one to two orders of magnitude higher. Both the similarity and difference in the PDF compared to those derived from solar neighborhood clouds match predictions of turbulent cloud models given the high-pressure environment of the CMZ. The PDF shows a small deviation from log-normal at high column densities confirming the youth of G0.253+0.016. Its lack of star formation is consistent with the theoretically predicted, environmentally dependent volume density threshold for star formation which is orders of magnitude higher than that derived for solar neighborhood clouds. Our results provide the first empirical evidence that the current theoretical understanding of molecular cloud structure derived from the solar neighborhood also holds in high-pressure environments. We therefore suggest that these theories may be applicable to understand star formation in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigating the electrical transport properties and electronic structure of Zr 2 ⁢CuSb 3

The checkerboard lattice has been proposed to host topological flat bands as a result of destructive interference among its various electronic hopping terms. However, it has proven challenging to realize experimentally due to the difficulty of isolating this structure from any significant out-of-plane bonding while maintaining structural integrity. Here, in this study, single crystals of Zr 2 CuSb 3 , a potential candidate for the checkerboard lattice, were synthesized using the solution (self-flux) method, and their structure was confirmed via x-ray diffraction. Electrical-transport measurements indicate metallic behavior with electron-dominated carriers. Angle-resolved photoemission spectroscopy reveals multiple electron pockets and significant k z broadening due to its large c axis and low dispersion features in k z . Density-functional theory (DFT) calculations further disentangle the contributions from each high-symmetry plane, providing a comprehensive characterization of electronic behavior. The DFT calculations were then used to determine the orbital contributions of the bands and detect the out-of-plane bonding which prevented the flat bands from forming.

Downey, Eoghan [Univ. of Michigan, Ann Arbor, MI (↗

Alkali-Stabilized Pt-OHx Species Catalyze Low-Temperature Water-Gas Shift Reactions

We report that alkali ions (sodium or potassium) added in small amounts activate platinum adsorbed on alumina or silica for the low-temperature water-gas shift (WGS) reaction (H{sub 2}O + CO {yields} H{sub 2} + CO{sub 2}) used for producing H{sub 2}. The alkali ion-associated surface OH groups are activated by CO at low temperatures ({approx}100 C) in the presence of atomically dispersed platinum. Both experimental evidence and density functional theory calculations suggest that a partially oxidized Pt-alkali-O{sub x}(OH){sub y} species is the active site for the low-temperature Pt-catalyzed WGS reaction. These findings are useful for the design of highly active and stable WGS catalysts that contain only trace amounts of a precious metal without the need for a reducible oxide support such as ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of low-dimensional N-heterocyclic carbene lattices

The covalent interaction of N-heterocyclic carbenes (NHCs) with transition metal atoms gives rise to distinctive frontier molecular orbitals (FMOs). These emergent electronic states have spurred the widespread adoption of NHC ligands in chemical catalysis and functional materials. Although formation of carbene-metal complexes in self-assembled monolayers on surfaces has been explored, design and electronic structure characterization of extended low-dimensional NHC-metal lattices remains elusive. Here, in this work, we demonstrate a modular approach to engineering one-dimensional (1D) metal-organic chains and two-dimensional (2D) Kagome lattices using the FMOs of NHC–Au–NHC junctions to create low-dimensional molecular networks exhibiting intrinsic metallicity. Scanning tunneling spectroscopy and first-principles density functional theory reveal the contribution of C–Au–C π-bonding states to dispersive bands that imbue 1D- and 2D-NHC lattices with exceptionally small work functions.

Qie, Boyu↗

A Structural and Ellipsometric Investigation of Thin Gallium Oxide Layers Deposited on Si by Means of Laser Deposition

The morphology of Ga{sub 2}O{sub 3} layers deposited on a silicon substrate by pulse laser deposition is studied using scanning electron microscopy in the thickness range of 30–200 nm. Using spectroscopic ellipsometry in the wavelength range from 250 to 900 nm, the thickness of layers and dispersion of their optical parameters (complex pseudodielectric function ε, refractive and absorptive indices) have been determined and the fraction of voids has been estimated in the scope of the Bruggeman effective medium approximation. In the spectrum of the imaginary part ε{sub 2}, there is observed an increase in values in the region of energy E = 4.8 eV corresponding to the direct interband transition in the Ga{sub 2}O{sub 3} structure. X-ray structure analysis showed the presence of peaks typical for the β-Ga{sub 2}O{sub 3} structure. The results of the investigations can be used for the formation of wide-bandgap gallium oxide layers in developing devices of power electronics and in creating optoelectronic devices for the UV range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Performance Circuit Pastes for Solid Oxide Fuel Cell Applications: Final Technical Report

Using a combination of in-plane electrical conductivity measurements, electrical contact resistance measurements, tensile fracture tests, double shear lap fracture tests, rapid thermal cycling adhesion tests, in situ wetting angle measurements, 3D X-ray tomography, reduction-oxidation (RedOx) cycling, scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDAX), Density Functional Theory (DFT) modeling, Molecular Dynamics (MD) modeling, and Phase Field modeling, this project determined that a new brazing technique developed by the PIs (specifically the use of nickel particles to direct the wetting and spreading of molten silver) could be used to produce well-adhered, >97% dense, electrically-conductive circuits, current collectors, and/or electrical contacts on a variety of ceramic and ceramic-coated substrates (specifically lanthanum strontium manganite, yttria stabilized zirconia, sapphire, Cr2O3-passivated stainless steel, and Al2O3-passivated stainless steel). Compared to other silver-based alternatives, Ag:Ni led to less manufacturing defects and was more tolerant of the extreme environments (isothermal high-temperature aging) and occasional abuse (rapid thermal cycling and RedOx cycling) encountered during Solid Oxide Fuel Cell and/or Solid Oxide Electrolysis Cell operation. Further, in some situations (such as when to produce Ag:Ni electrical contacts to Al2O3-protected stainless steel) the Ni particles also improved operation by acting as chemical getters that removed electrically-insulating, surface-segregating substrate impurities (i.e. by lowering the contact resistance with the underlying substrate).

36 MATERIALS SCIENCE↗

Homogenization theory for the effective permittivity of a turbulent tokamak plasma in the scrape-off layer

There has been a growing interest, over the past few years, on understanding the effect on radio frequency waves due to turbulence in the scrape-off layer of tokamak plasmas. While the far scrape-off layer density width is of the order of centimeters in contemporary tokamaks, in ITER, and in future fusion reactors, the corresponding width will be of the order of tens of centimeters. As such, this could impact the spectral properties of the waves and, consequently, the transport of wave energy and momentum to the core plasma. The turbulence in the scrape-off layer spans a broad range of spatial scales and includes blob and filaments that are elongated along the magnetic field lines. The propagation of radio frequency waves through this tenuous plasma is given by Maxwell's equations. The characteristic properties of the plasma appear as a permittivity tensor in the expression for the current in Ampere's equation. This paper develops a formalism for expressing the permittivity of a turbulent plasma using the homogenization technique. This technique has been extensively used to express the dielectric properties of composite materials that are spatially inhomogeneous, for example, due to the presence of micro-structures. In a similar vein, the turbulent plasma in the scrape-off layer is spatially inhomogeneous and can be considered as a composite material in which the micro-structures are filaments and blobs. The classical homogenization technique is not appropriate for the magnetized plasma in the scrape-off layer, as the radio frequency waves span a broad range of wavelengths and frequencies -- from tens of megahertz to hundreds of gigahertz. The formalism in this paper makes use of the Fourier space components of the electric and magnetic fields of the radio frequency waves for the scattered fields and fields inside the filaments and blobs. These are the eigenvectors of the dispersion matrix which, using the Green's function approach, lead to a homogenized dielectric tensor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Statistical parameters of reverberating fields, calculated by computer

A method, developed for making measurements in reverberation chambers in the steady state mode, is reported. Spatial distribution patterns of the square of the sound pressure vs type of exciting signal were produced theoretically and checked experimentally in a reverberation chamber. Results of measurements of spatial irregularities of the field with pure tones and with noise bands in the 200 to 2,000 Hz frequency range were used for calculating statistical parameters of the reverbation fields by computer. The calculation program included determination of density probability function, integral distribution pattern, mathematical expectation, normalized dispersion of the mean square of the pressure.

Lebedeva, I. V.↗

Temperature anisotropy instabilities driven by Whang's ion model

The behavior of four temperature anisotropy instabilities in a single-component space plasma is investigated theoretically using the solar wind model (i.e., heat flux modified non-Maxwellian velocity distribution functions) proposed by Whang (1972). The linear dispersion properties are studied in an infinite Vlasov plasma where the proton distribution is assumed to consist of one warm slow-speed component and where the electron background is isotropic. It is shown that the fire hose, mirror, and Harris instability do not occur under these conditions, and that only the ion cyclotron instability is of importance in Whang's ion model. Growth rates are shown to have values between 0.021 and 0.00011. Increasing temperature anisotropy causes the range frequencies where wave particle interaction occurs to be shifted toward the ion gyrofrequency.

Leubner, M. P.↗

Electromagnetic ion beam instabilities - Hot beams at interplanetary shocks

This paper considers Vlasov instabilities driven by a very hot ion beam streaming parallel to a magnetic field. The linear theory of electromagnetic instabilities driven by such a beam in a homogeneous, collisionless, nonrelativistic plasma is used. Numerical solutions of the full linear dispersion equation for bi-Maxwellian distribution functions are presented. If the thermal speed of the beam is greater than its drift speed, the two dominant modes are the right-hand and left-hand resonant ion beam instabilities. The parametric dependencies of the threshold drift speeds and growth rates for both modes are presented. In particular, the thresholds are shown to be sensitive functions of the beam temperature anisotropies. Arguments are presented that these two modes are driven by the suprathermal ion component at interplanetary shocks, and that the growth of these modes is sufficient to account for the amplitudes of MHD-like waves observed at such shocks.

Gary, S. P.↗

Electromagnetic electron temperature anisotropy instabilities

This paper considers electromagnetic Vlasov instabilities driven by electron temperature anisotropies in a homogeneous, nonrelativistic magnetized plasma. Numerical solutions of the full linear dispersion equation for bi-Maxwellian distribution functions and instabilities propagating parallel to the magnetic field are presented. Parametric dependences of the maximum growth rates of the electron fire hose and whistler anisotropy instabilities are given.

Gary, S. P.↗

Lower-hybrid instabilities driven by an ion velocity ring

The lower-hybrid instabilities in high-beta (ratio of plasma to magnetic pressure) plasmas driven by ring-ion distributions in velocity space are investigated. A dispersion equation including electromagnetic effects is derived. In the low-beta limit, analytic expressions are obtained which illuminate the physical nature of the instabilities. The complete dispersion equation is solved numerically as a function of ring speed and plasma beta for several types of ring distribution. Electromagnetic effects are important for relatively energetic rings even in the low-beta regime, suppressing growth rates and shifting the angle of propagation to more oblique angles. Stabilization by thermal effects is also discussed. Application of these results to the earth's bow shock, AMPTE, comets and solar flares is suggested.

Akimoto, K.↗

On star formation in stellar systems. II - Photoionization in protodwarf galaxies

Numerical hydrodynamical calculations are used to study the effects of the onset of star formation on the residual gas in a primordial low-mass Local-Group dwarf spheroidal galaxy in the size range 0.3-1.0 kpc. It is demonstrated that photoionization in the presence of a moderate gas-density gradient can be responsible for gas ejection on a time-scale of a few times 10 to the 7th yr. The results indicate that, given a normal initial mass function, many protodwarf galaxies may have been dispersed by the onset of star formation.

Noriega-Crespo, A.↗