Search NASA⌕ Search

SEARCH · Search NASA

Results for “error bound”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Evaluation of dynamic testing of full-scale wind turbine drivetrains with hardware-in-the-loop

Dynamometer testing of full-scale wind turbine drivetrains involves subjecting integrated components to extreme static loads, fatigue loads, or dynamic loads to replicate field conditions. This paper provides a detailed evaluation of the uncertainty and errors in applied loads and measured responses, and their magnitude relative to established repeatability bounds for a drivetrain subjected to static and dynamic loads on the 7.5 MW test bench at the Clemson University Wind Turbine Drivetrain Testing Facility. An ideal drivetrain simulation model is utilized to isolate the influence of load tracking errors on test article responses. It is shown that the test article response variations are mainly driven by run out and clearances inherent to the drivetrain. For the dynamic profiles, the load tracking errors are within acceptable limits. Furthermore, a frequency analysis is used to show that the test bench controller tracking performance is acceptable for profiles with frequency content up to 1.5 Hz.

17 WIND ENERGY↗

A new upper bound for the growth factor in Gaussian elimination with complete pivoting

Abstract The growth factor in Gaussian elimination measures how large the entries of an LU factorization can be relative to the entries of the original matrix. It is a key parameter in error estimates, and one of the most fundamental topics in numerical analysis. We produce an upper bound of for the growth factor in Gaussian elimination with complete pivoting — the first improvement upon Wilkinson's original 1961 bound of .

Bisain, Ankit [Department of Mathematics Massachus↗

Characterizing the Reproducibility of Noisy Quantum Circuits

The ability of a quantum computer to reproduce or replicate the results of a quantum circuit is a key concern for verifying and validating applications of quantum computing. Statistical variations in circuit outcomes that arise from ill-characterized fluctuations in device noise may lead to computational errors and irreproducible results. While device characterization offers a direct assessment of noise, an outstanding concern is how such metrics bound the reproducibility of a given quantum circuit. Here, we first directly assess the reproducibility of a noisy quantum circuit, in terms of the Hellinger distance between the computational results, and then we show that device characterization offers an analytic bound on the observed variability. We validate the method using an ensemble of single qubit test circuits, executed on a superconducting transmon processor with well-characterized readout and gate error rates. The resulting description for circuit reproducibility, in terms of a composite device parameter, is confirmed to define an upper bound on the observed Hellinger distance, across the variable test circuits. This predictive correlation between circuit outcomes and device characterization offers an efficient method for assessing the reproducibility of noisy quantum circuits.

97 MATHEMATICS AND COMPUTING↗

The two-qubit amplitude damping channel: Characterization using quantum stabilizer codes

A protocol based on quantum error correction based characterization of quantum dynamics (QECCD) is developed for quantum process tomography on a two-qubit system interacting dissipatively with a vacuum bath. The method uses a 5-qubit quantum error correcting code that corrects arbitrary errors on the first two qubits, and also saturates the quantum Hamming bound. The dissipative interaction with a vacuum bath allows for both correlated and independent noise on the two-qubit system. We study the dependence of the degree of the correlation of the noise on evolution time and inter-qubit separation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Minimum-error discrimination of entangled quantum states

Strategies to optimally discriminate between quantum states are critical in quantum technologies. We present an experimental demonstration of minimum-error discrimination between entangled states, encoded in the polarization of pairs of photons. Although the optimal measurement involves projection onto entangled states, we use a result of J. Walgate et al. [Phys. Rev. Lett. 85, 4972 (2000)] to design an optical implementation employing only local polarization measurements and feed-forward, which performs at the Helstrom bound. Our scheme can achieve perfect discrimination of orthogonal states and minimum-error discrimination of nonorthogonal states. Our experimental results show a definite advantage over schemes not using feed-forward.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Verification of analytic energy moments for the one-dimensional energy dependent neutron diffusion equation with MCNP5 and Attila-7.1.0

The energy dependent neutron diffusion equation (EDNDE) is converted into a moment equation which is solved analytically for the 1-D problem of a bare sphere of pure 235U. The normalized moments 0–5 generated analytically are compared to normalized energy moments, from Monte Carlo N Particle 5 version 1.40 (MCNP5) and Attila-7.1.0-beta version (Attila). The analytic normalized neutron energy moments, fall between the results from MCNP5 (lower bound) and Attila (upper bound) and are accurate compared to MCNP5 neutron energy moments when error in this Monte Carlo simulation are considered. The error range is from 0% to 14%. The Attila moments are less accurate when compared to MCNP5 than the analytical moments derived in this work. The method of moments is shown to be a fast reliable method, compared to either Monte Carlo methods (MCNP5) or 30 multi-energy group methods (Attila).

99 GENERAL AND MISCELLANEOUS↗

Particle tracking during Ostwald ripening using time-resolved laboratory X-ray microtomography

Laboratory X-ray microtomography is investigated as a method for obtaining time-resolved images of microstructural coarsening of the semisolid state of Al–5 wt.% Cu samples during Ostwald ripening. Owing to the 3D imaging capability of tomography, this technique uniquely provides access to the growth rates of individual particles, thereby not only allowing a statistical characterization of coarsening—as has long been possible by conventional metallography—but also enabling quantification of the influence of local environment on particle boundary migration. The latter information is crucial to understanding growth kinetics during Ostwald ripening at high volume fractions of the coarsening phase. Automated image processing and segmentation routines were developed to close gaps in the network of particle boundaries and to track individual particles from one annealing step to the next. The particle tracking success rate places an upper bound of only a few percent on the likelihood of segmentation errors for any given particle. The accuracy of particle size trajectories extracted from the time-resolved tomographic reconstructions is correspondingly high. Statistically averaged coarsening data and individual particle growth rates are in excellent agreement with the results of prior experimental studies and with computer simulations of Ostwald ripening. - Highlights: • Ostwald ripening in Al–5 wt.% Cu measured by laboratory X-ray microtomography • Time-resolved measurement of individual particle growth • Automated segmentation routines developed to close gaps in particle boundary network • Particle growth/shrinkage rates deviate from LSW model prediction.

36 MATERIALS SCIENCE↗

Benchmarking quantum logic operations relative to thresholds for fault tolerance

Contemporary methods for benchmarking noisy quantum processors typically measure average error rates or process infidelities. However, thresholds for fault-tolerant quantum error correction are given in terms of worst-case error rates—defined via the diamond norm—which can differ from average error rates by orders of magnitude. One method for resolving this discrepancy is to randomize the physical implementation of quantum gates, using techniques like randomized compiling (RC). In this work, we use gate set tomography to perform precision characterization of a set of two-qubit logic gates to study RC on a superconducting quantum processor. We find that, under RC, gate errors are accurately described by a stochastic Pauli noise model without coherent errors, and that spatially correlated coherent errors and non-Markovian errors are strongly suppressed. We further show that the average and worst-case error rates are equal for randomly compiled gates, and measure a maximum worst-case error of 0.0197(3) for our gate set. Our results show that randomized benchmarks are a viable route to both verifying that a quantum processor’s error rates are below a fault-tolerance threshold, and to bounding the failure rates of near-term algorithms, if—and only if—gates are implemented via randomization methods which tailor noise.

97 MATHEMATICS AND COMPUTING↗

Comment on “The two dimensional motion of a particle in an inverse square potential: Classical and quantum aspects” [J. Math. Phys. 54, 053509 (2013)]

We comment on a fatal flaw in the analysis contained in the work of Martínez-y-Romero et al., [J. Math. Phys. 54, 053509 (2013)], which concerns the motion of a point particle in an inverse square potential, and show that most conclusions reached there are wrong. In particular, the manifestly senseless claim that, in the attractive potential case, no bounded orbits exist for negative energies, is traced to a sign error. Several more mistakes, both in the classical and the quantum cases, are pointed out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Retransmission error control with memory

In this paper, an error control technique that is a basic improvement over automatic-repeat-request ARQ is presented. Erroneously received blocks in an ARQ system are used for error control. The technique is termed ARQ-with-memory (MRQ). The general MRQ system is described, and simple upper and lower bounds are derived on the throughput achievable by MRQ. The performance of MRQ with respect to throughput, message delay and probability of error is compared to that of ARQ by simulating both systems using error data from a VHF satellite channel being operated in the ALOHA packet broadcasting mode.

Sindhu, P. S.↗

Flight-test measurements of ground effect - STOL airplanes

Powered-lift STOL aircraft exhibit special aerodynamic characteristics that necessitate changes in established procedures of flight testing. Methods used in ground-effect flight testing of STOL-configured aircraft are described, with special emphasis on results obtained from tests of the YC-15 AMST prototype aircraft. Ground effect on lift and on drag is theoretically analyzed in terms of trailing vortices, bound vortex, and flight-path angle. Airspeed static source position errors are induced by ground constraint and must be considered in the data reduction. Flight-test results show a positive lift increment due to ground proximity.

Parks, E. K.↗

Reassessment of net radiation measurements in the atmosphere of Venus

An analysis was performed of the possible error mechanisms which degraded the IR net flux measurements made by the three small atmospheric probes dispatched from the Pioneer Venus spacecraft. The larger errors began below 30 km, and caused the data to be inconsistent with previous estimates of the atmospheric opacity. Evaluations were made of the possible radiation field perturbations behind each probe, cloud particle deposition on the sensor windows, and thermal disturbances within the sensors because of gas flow through the window retainers. The gas flow through the retainers was identified as the most likely error source, and was demonstrated in laboratory tests. A strong Reynolds number dependence was also found. Radiative transfer calculations were performed to account for the errors, using the constraints defined by the tests. Upper and lower bounds were calculated for the true net flux for both day and night conditions.

Revercomb, H. E.↗

New short constraint length, rate 1/N convolutional codes which minimize the required SNR for given desired bit error rates

It is pointed out that for a convolutional coding system, the Bit Error Rate (BER) at the Viterbi decoder output is upper-bounded by the transfer function bound. A large number of rate 1/N convolutional codes have been reported. The criteria used for determining the quality of a code in code search procedures, however, may not be very suited for cases in which the required BER is in the moderate range. For this reason, it may be best to select the code with the aim to minimize the required SNR for a given disired BER. Partial code searching techniques are presented, and a table listing the code search results is provided.

Lee, P. J.↗

Uncertainty Quantification for Polynomial Systems via Bernstein Expansions

This paper presents a unifying framework to uncertainty quantification for systems having polynomial response metrics that depend on both aleatory and epistemic uncertainties. The approach proposed, which is based on the Bernstein expansions of polynomials, enables bounding the range of moments and failure probabilities of response metrics as well as finding supersets of the extreme epistemic realizations where the limits of such ranges occur. These bounds and supersets, whose analytical structure renders them free of approximation error, can be made arbitrarily tight with additional computational effort. Furthermore, this framework enables determining the importance of particular uncertain parameters according to the extent to which they affect the first two moments of response metrics and failure probabilities. This analysis enables determining the parameters that should be considered uncertain as well as those that can be assumed to be constants without incurring significant error. The analytical nature of the approach eliminates the numerical error that characterizes the sampling-based techniques commonly used to propagate aleatory uncertainties as well as the possibility of under predicting the range of the statistic of interest that may result from searching for the best- and worstcase epistemic values via nonlinear optimization or sampling.

Crespo, Luis G.↗

Fabrication and Study of a Concave Crystal Mirror for the KORTES Project

A method for fabrication of a concave spherical mirror made of crystalline quartz is proposed and X-ray optical properties of the mirror are studied. The radius of curvature is 1630 mm. The shape of the mirror surface is studied using an interferometer with a diffraction reference wave. In the entire processing region, the maximum deviation from the nearest sphere is about 0.2 μm and the rms is 34 nm, so that high quality of imaging is provided with an angular error of about 2″ (angular seconds). Reflection coefficient (about 7%) and lower bound limit of spectral selectivity (λ/δλ ≈ 1775) are determined in the vicinity of a wavelength of λ = 0.834 nm, which is close to the working wavelengths of the MgXII doublet (λ = 0.8418 and 0.8423 nm). Position of the Bragg peak and spectral selectivity remain unchanged upon bending of the crystal mirror within measurement accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE PROPER MOTION OF THE MAGELLANIC CLOUDS. I. FIRST RESULTS AND DESCRIPTION OF THE PROGRAM

We present the first results of a ground-based program to determine the proper motion of the Magellanic Clouds (MCs) relative to background quasars (QSO), being carried out using the Irenee du Pont 2.5 m telescope at Las Campanas Observatory, Chile. Eleven QSO fields have been targeted in the Small Magellanic Cloud (SMC) over a time base of six years, and with seven epochs of observation. One quasar field was targeted in the Large Magellanic Cloud (LMC), over a time base of five years, and with six epochs of observation. The shorter time base in the case of the LMC is compensated by the much larger amount of high-quality astrometry frames that could be secured for the LMC quasar field (124 frames), compared to the SMC fields (an average of roughly 45 frames). In this paper, we present final results for field Q0557-6713 in the LMC and field Q0036-7227 in the SMC. From field Q0557-6713, we have obtained a measured proper motion of {mu}{sub {alpha}}cos {delta} = +1.95 {+-} 0.13 mas yr{sup -1}, {mu}{sub {delta}} = +0.43 {+-} 0.18 mas yr{sup -1} for the LMC. From field Q0036-7227, we have obtained a measured proper motion of {mu}{sub {alpha}} cos{delta} = +0.95 {+-} 0.29 mas yr{sup -1}, {mu}{sub {delta}} = -1.14 {+-} 0.18 mas yr{sup -1} for the SMC. Although we went through the full procedure for another SMC field (QJ0036-7225), on account of unsolvable astrometric difficulties caused by blending of the QSO image, it was impossible to derive a reliable proper motion. Current model rotation curves for the plane of the LMC indicate that the rotational velocity (V {sub rot}) at the position of LMC field Q0557-6713 can be as low as 50 km s{sup -1}, or as high as 120 km s{sup -1}. A correction for perspective and rotation effects leads to a center of mass proper motion for the LMC of {mu}{sub {alpha}} cos{delta} = +1.82 {+-} 0.13 mas yr{sup -1}, {mu}{sub {delta}} = +0.39 {+-} 0.15 mas yr{sup -1} (V {sub rot} = 50 km s{sup -1}), and to {mu}{sub {alpha}} cos{delta} = +1.61 {+-} 0.13 mas yr{sup -1}, {mu}{sub {delta}} = +0.60 {+-} 0.15 mas yr{sup -1} (V {sub rot} = 120 km s{sup -1}). Assuming that the SMC has a disk-like central structure, but that it does not rotate, we obtain a center of mass proper motion for the SMC of {mu}{sub {alpha}} cos{delta} = +1.03 {+-} 0.29 mas yr{sup -1}, {mu}{sub {delta}} = -1.09 {+-} 0.18 mas yr{sup -1}. Our results are in reasonable agreement with most previous determinations of the proper motion of the MCs, including recent Hubble Space Telescope measurements. Complemented with published values of the radial velocity of the centers of the LMC and SMC, we have used our proper motions to derive the galactocentric (gc) velocity components of the MCs. For the LMC, we obtain V {sub gc,t} = +315 {+-} 20 km s{sup -1}, V {sub gc,r} = +86 {+-} 17 km s{sup -1} (V {sub rot} = 50 km s{sup -1}), and V {sub gc,t} = +280 {+-} 24 km s{sup -1}, V {sub gc,r} = +94 {+-} 17 km s{sup -1} (V {sub rot} = 120 km s{sup -1}). For the SMC, we obtain V {sub gc,t} = +258 {+-} 50 km s{sup -1}, V {sub gc,r} = +20 {+-} 44 km s{sup -1}. These velocities imply a relative velocity between the LMC and SMC of 84 {+-} 50 km s{sup -1}, for V {sub rot,LMC} = 50 km s{sup -1}, and 62 {+-} 63 km s{sup -1} for V {sub rot,LMC} = 120 km s{sup -1}. Albeit our large errors, these values are not inconsistent with the standard assumption that the MCs are gravitationally bound to each other.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-Physics Surrogate Modeling with Dimensionality Reduction

This summary provides a new algorithm to construct surrogate models for multi-physics, nonlinear, high dimensional models which typically suffer from the curse of dimensionality. To deal with the high computational cost and difficult error estimation, we employ recent advances in reduced order modeling (ROM) techniques to do an error-preserving reduction for the number of influential model parameters, followed by a conventional surrogate construction process. To implement ROM for a multiphysics model, a range finding algorithm (RFA) is used to identify a linear transformation in which the number of influential parameters can be minimized and the errors resulting from the non-influential parameters can be upper-bounded. The proposed algorithm is applied to the MAMMOTH coupled code system developed at the Idaho National Laboratory. In particular, we investigate the reducibility of Rattlesnake and BISON codes and their multi-physics coupling. The most important result of this work is that the reduction obtained with coupled physics is more significant than that with individual physics models. This summary explores the application of ROM techniques on multi-physics coupling codes system. Concise methodology is provided and selected numerical results are provided to show that coupling system provides additional reduction at interfaces. Future work could be invested to determine the optimum surrogate model format. (authors)

97 MATHEMATICS AND COMPUTING↗