Search NASA⌕ Search

SEARCH · Search NASA

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

MO-FG-209-02: Development of a Virtual Breast Phantom From a Multi-Modality Perspective

This symposium will review recent advances in the simulation methods for evaluation of novel breast imaging systems – the subject of AAPM Task Group TG234. Our focus will be on the various approaches to development and validation of software anthropomorphic phantoms and their use in the statistical assessment of novel imaging systems using such phantoms along with computational models for the x-ray image formation process. Due to the dynamic development and complex design of modern medical imaging systems, the simulation of anatomical structures, image acquisition modalities, and the image perception and analysis offers substantial benefits of reduced cost, duration, and radiation exposure, as well as the known ground-truth and wide variability in simulated anatomies. For these reasons, Virtual Clinical Trials (VCTs) have been increasingly accepted as a viable tool for preclinical assessment of x-ray and other breast imaging methods. Activities of TG234 have encompassed the optimization of protocols for simulation studies, including phantom specifications, the simulated data representation, models of the imaging process, and statistical assessment of simulated images. The symposium will discuss the state-of-the-science of VCTs for novel breast imaging systems, emphasizing recent developments and future directions. Presentations will discuss virtual phantoms for intermodality breast imaging performance comparisons, extension of the breast anatomy simulation to the cellular level, optimized integration of the simulated imaging chain, and the novel directions in the observer models design. Learning Objectives: Review novel results in developing and applying virtual phantoms for inter-modality breast imaging performance comparisons; Discuss the efforts to extend the computer simulation of breast anatomy and pathology to the cellular level; Summarize the state of the science in optimized integration of modules in the simulated imaging chain; Compare novel directions in the design of observer models for task based validation of imaging systems. PB: Research funding support from the NIH, NSF, and Komen for the Cure; NIH funded collaboration with Barco, Inc. and Hologic, Inc.; Consultant to Delaware State Univ. and NCCPM, UK. AA: Employed at Barco Healthcare.; P. Bakic, NIH: (NIGMS P20 #GM103446, NCI R01 #CA154444); M. Das, NIH Research grants.

60 APPLIED LIFE SCIENCES↗

MO-FG-209-05: Towards a Feature-Based Anthropomorphic Model Observer

This symposium will review recent advances in the simulation methods for evaluation of novel breast imaging systems – the subject of AAPM Task Group TG234. Our focus will be on the various approaches to development and validation of software anthropomorphic phantoms and their use in the statistical assessment of novel imaging systems using such phantoms along with computational models for the x-ray image formation process. Due to the dynamic development and complex design of modern medical imaging systems, the simulation of anatomical structures, image acquisition modalities, and the image perception and analysis offers substantial benefits of reduced cost, duration, and radiation exposure, as well as the known ground-truth and wide variability in simulated anatomies. For these reasons, Virtual Clinical Trials (VCTs) have been increasingly accepted as a viable tool for preclinical assessment of x-ray and other breast imaging methods. Activities of TG234 have encompassed the optimization of protocols for simulation studies, including phantom specifications, the simulated data representation, models of the imaging process, and statistical assessment of simulated images. The symposium will discuss the state-of-the-science of VCTs for novel breast imaging systems, emphasizing recent developments and future directions. Presentations will discuss virtual phantoms for intermodality breast imaging performance comparisons, extension of the breast anatomy simulation to the cellular level, optimized integration of the simulated imaging chain, and the novel directions in the observer models design. Learning Objectives: Review novel results in developing and applying virtual phantoms for inter-modality breast imaging performance comparisons; Discuss the efforts to extend the computer simulation of breast anatomy and pathology to the cellular level; Summarize the state of the science in optimized integration of modules in the simulated imaging chain; Compare novel directions in the design of observer models for task based validation of imaging systems. PB: Research funding support from the NIH, NSF, and Komen for the Cure; NIH funded collaboration with Barco, Inc. and Hologic, Inc.; Consultant to Delaware State Univ. and NCCPM, UK. AA: Employed at Barco Healthcare.; P. Bakic, NIH: (NIGMS P20 #GM103446, NCI R01 #CA154444); M. Das, NIH Research grants.

60 APPLIED LIFE SCIENCES↗

Perovskite grain wrapping by converting interfaces and grain boundaries into robust and water-insoluble low-dimensional perovskites

Stabilizing perovskite solar cells requires consideration of all defective sites in the devices. Substantial efforts have been devoted to interfaces, while stabilization of grain boundaries received less attention. Here, we report on a molecule tributyl(methyl)phosphonium iodide (TPI), which can convert perovskite into a wide bandgap one-dimensional (1D) perovskite that is mechanically robust and water insoluble. Mixing TPI with perovskite precursor results in a wrapping of perovskite grains with both grain surfaces and grain boundaries converted into several nanometer-thick 1D perovskites during the grain formation process as observed by direct mapping. The grain wrapping passivates the grain boundaries, enhances their resistance to moisture, and reduces the iodine released during light soaking. The perovskite films with wrapped grains are more stable under heat and light. The best device with wrapped grains maintained 92.2% of its highest efficiency after light soaking under 1-sun illumination for 1900 hours at 55°C open-circuit condition.

14 SOLAR ENERGY↗

Critical instability at moving keyhole tip generates porosity in laser melting

Laser powder bed fusion is a dominant metal 3D printing technology. However, porosity defects remain a challenge for fatigue-sensitive applications. Some porosity is associated with deep and narrow vapor depressions called keyholes, which occur under high-power, low–scan speed laser melting conditions. High-speed x-ray imaging enables operando observation of the detailed formation process of pores in Ti-6Al-4V caused by a critical instability at the keyhole tip. We found that the boundary of the keyhole porosity regime in power-velocity space is sharp and smooth, varying only slightly between the bare plate and powder bed. The critical keyhole instability generates acoustic waves in the melt pool that provide additional yet vital driving force for the pores near the keyhole tip to move away from the keyhole and become trapped as defects.

47 OTHER INSTRUMENTATION↗

Formation of active sites on transition metals through reaction-driven migration of surface atoms

Adopting low-index single-crystal surfaces as models for metal nanoparticle catalysts has been questioned by the experimental findings of adsorbate-induced formation of subnanometer clusters on several single-crystal surfaces. Here we used density functional theory calculations to elucidate the conditions that lead to cluster formation and show how adatom formation energies enable efficient screening of the conditions required for adsorbate-induced cluster formation. We studied a combination of eight face-centered cubic transition metals and 18 common surface intermediates and identified systems relevant to catalytic reactions, such as carbon monoxide (CO) oxidation and ammonia (NH 3 ) oxidation. We used kinetic Monte Carlo simulations to elucidate the CO-induced cluster formation process on a copper surface. Scanning tunneling microscopy of CO on a nickel (111) surface that contains steps and dislocations points to the structure sensitivity of this phenomenon. Metal-metal bond breaking that leads to the evolution of catalyst structures under realistic reaction conditions occurs much more broadly than previously thought.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Zirconium Diboride Films and ZrB{sub 2}/BC{sub x}N{sub y} Heterostructures

Using mechanochemical synthesis, we have prepared zirconium borohydride, Zr(BH{sub 4}){sub 4}, as a precursor for ZrB{sub 2} film growth by chemical vapor deposition. We have carried out the thermodynamic modeling of phase formation processes in the Zr–B–(N)–H and Zr–B–(N)–H–O systems in a wide temperature range, from 100 to 2500°C, at various p{sub (H2)}/p{sub (Zr(BH4)4)} and p{sub (NH3)}/p{sub (Zr(BH4)4)} partial pressure ratios in the starting gas mixtures. A process has been proposed for the growth of zirconium diboride films by Zr(BH{sub 4}){sub 4} decomposition using two techniques: chemical vapor deposition and plasma-enhanced chemical vapor deposition. We also developed a process for the growth of multilayer ZrB{sub 2}-and BC{sub x}N{sub y}-based structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of Compounds in the Ag{sub 2}O–Sb{sub 2}O{sub 3}–MoO{sub 3} System on Heating

This paper presents a detailed study of phase formation processes in the AgNO{sub 3}–Sb{sub 2}O{sub 3}–MoO{sub 3} system during heating in air. The compositions of the solid-state reaction products have been determined using thermogravimetry and qualitative X-ray diffraction. The results demonstrate that, at a final heat treatment temperature of 1023 K, synthesis yields a range of Ag{sub 2–x}Sb{sub 2–x}Mo{sub x}O{sub 6} compounds with the pyrochlore structure and 0.0 ≤ x ≤ 2.0. The structural parameters of the synthesized phases have been refined by the Rietveld method in space group Fd3̅m and their electrical conductivity has been measured.

36 MATERIALS SCIENCE↗

Temperature-Induced structural phase transformations in Cu{sub 1.50}Zn{sub 0.30}Te and Cu{sub 1.75}Cd{sub 0.05}Te single crystals

The results of studying the temperature-induced polymorphic phase transformations in Cu{sub 1.50}Zn{sub 0.30}Te and Cu{sub 1.75}Cd{sub 0.05}Te single crystals are presented. The single crystals have been investigated in the range of 290–1100 K using X-ray diffraction analysis. The temperature dependences of the unit-cell parameters, X-ray density, and coefficients of thermal expansion for each polymorphic modification of Cu{sub 1.50}Zn{sub 0.30}Te and Cu{sub 1.75}Cd{sub 0.05}Te single crystals are presented. The influence of cationic substitution (replacement of Cu{sup 2+} with Zn{sup 2+} and Cd{sup 2+} cations) on the phase-formation processes, number of polymorphic modifications, and temperature of structural phase transition in single crystals of these solid solutions is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation-produced defects in germanium: Experimental data and models of defects

The problem of radiation-produced defects in n-Ge before and after n → p conversion is discussed in the light of electrical data obtained by means of Hall effect measurements as well as Deep Level Transient Spectroscopy. The picture of the dominant radiation defects in irradiated n-Ge before n → p conversion appears to be complicated, since they turn out to be neutral in n-type material and unobserved in the electrical measurements. It is argued that radiation-produced acceptors at ≈E{sub C} – 0.2 eV previously ascribed to vacancy-donor pairs (E-centers) play a minor role in the defect formation processes under irradiation. Acceptor defects at ≈E{sub V} + 0.1 eV are absolutely dominating in irradiated n-Ge after n → p conversion. All the radiation defects under consideration were found to be dependent on the chemical group-V impurities. Together with this, they are concluded to be vacancy-related, as evidenced positron annihilation experiments. A detailed consideration of experimental data on irradiated n-Ge shows that the present model of radiation-produced defects adopted in literature should be reconsidered.

36 MATERIALS SCIENCE↗

Effect of the Electric Mode and γ Irradiation on Surface-Defect Formation at the Si–SiO{sub 2} Interface in a MOS Transistor

The results of experimental investigation into surface-defect formation under the effect of gamma-radiation with a dose rate P = 0.1 rad(Si)/s on MOS (metal-oxide-semiconductor) transistors with the n-type channel in the passive and active modes are presented. Two stages of surface-defect formation are observed. A qualitative model is proposed to explain the effect of the the drain transistor voltage on the defect formation process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrodynamic Flows in Microsized Liquid Crystal Cells with Orientational Defects

The effect of the orientational defect (OD) on the formation process of a vortical flow v(t, r), emerging in a microsized liquid crystal (LC) cell under the action of a focused laser radiation, was studied within the nonlinear generalization of the classical Ericksen–Leslie theory by numerical methods, considering the thermomechanical contributions to both the stress tensor and viscous torque, that acts on the unit volume of the liquid crystal phase (LC phase). The analysis of the obtained results showed that the vortical flow, rotating clockwise, is generated in a “defect” LC cell close to the OD, with the OD, placed on the lower bounding surface, on which the laser radiation was focused. The rotational velocity of this flow is two orders of magnitude greater than the rotational velocity of the vortex, which is generated in a “pure” LC cell at the same conditions and rotates anticlockwise.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mass Spectrometry of a Xylitol Molecule

The technique and results of a mass spectrometric study on the yield of positive ions formed upon ionization of xylitol molecules by electron impact are discussed. The mass spectra of xylitol are studied in the range of mass numbers of 10–160 Da and in the range of bombarding electrons energies of 5–80 eV. Based on the analysis of the measured mass spectra, a scheme of xylitol fragmentation is proposed, which contains the most probable channels of formation of ion-fragments upon electron impact, when the energy of the incident electrons significantly exceeds the ionization potential of the molecule. The appearance energies of ionized fragments of xylitol are determined for the first time from the energy dependences of the effective cross-section formation of the ions upon electron impact. The dynamics of ionized fragment formation is studied in the temperature range of the initial substance evaporation of 340–410 K. The behavior of the temperature dependence indicates that the formation processes of water and oxonium cations compete with each other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Bayesian Abel Inversion in Quantitative X-Ray Radiography

A common image formation process in high-energy X-ray radiography is to have a pulsed power source that emits X-rays through a scene, a scintillator that absorbs X-rays and uoresces in the visible spectrum in response to the absorbed photons, and a CCD camera that images the visible light emitted from the scintillator. The intensity image is related to areal density, and, for an object that is radially symmetric about a central axis, the Abel transform then gives the object's volumetric density. Two of the primary drawbacks to classical variational methods for Abel inversion are their sensitivity to the type and scale of regularization chosen and the lack of natural methods for quantifying the uncertainties associated with the reconstructions. In this work we cast the Abel inversion problem within a statistical framework in order to compute volumetric object densities from X-ray radiographs and to quantify uncertainties in the reconstruction. A hierarchical Bayesian model is developed with a likelihood based on a Gaussian noise model and with priors placed on the unknown density pro le, the data precision matrix, and two scale parameters. This allows the data to drive the localization of features in the reconstruction and results in a joint posterior distribution for the unknown density pro le, the prior parameters, and the spatial structure of the precision matrix. Results of the density reconstructions and pointwise uncertainty estimates are presented for both synthetic signals and real data from a U.S. Department of Energy X-ray imaging facility.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

pyCroscopy

Suite of Python Libraries that implement structure data format processing, multivariate analysis, and interactive visualization of microscopy data and other spectral imaging modalities, including scanning probe microscopy, electron microscopy, Bragg diffraction microscopy, and chemical imaging.

Jesse, Stephen↗

The impact of size distribution assumptions in a bulk one-moment microphysics scheme on simulated surface precipitation and storm dynamics during a low-topped supercell case in Belgium

In this research the impact of modifying the size distribution assumptions of the precipitating hydrometeors in a bulk one-moment microphysics scheme on simulated surface precipitation and storm dynamics has been explored for long-lived low-topped supercells in Belgium. It was shown that weighting the largest precipitating ice species of the microphysics scheme to small graupel results in an increase of surface precipitation because of counteracting effects. On the one hand, the precipitation formation process slowed down, resulting in lower precipitation efficiency. On the other hand, latent heat release associated with freezing favored more intense storms. In contrast to previous studies finding decreased surface precipitation when graupel was present in the microphysics parameterization, storms were rather shallow in the authors simulations. This left little time for graupel sublimation. The impact of size distribution assumptions of snow was found to be small, but more realistic size distribution assumptions of rain led to the strongest effect on surface precipitation. Cold pools shrunk because of weaker rain evaporation at the cold pool boundaries, leading to a decreased surface rain area.

54 ENVIRONMENTAL SCIENCES↗

Characteristics of Ice Cloud–Precipitation of Warm Season Mesoscale Convective Systems over the Great Plains

Abstract In this study, the mesoscale convective systems (MCSs) are tracked using high-resolution radar and satellite observations over the U.S. Great Plains during April–August from 2010 to 2012. The spatiotemporal variability of MCS precipitation is then characterized using the Stage IV product. We found that the spatial variability and nocturnal peaks of MCS precipitation are primarily driven by the MCS occurrence rather than the precipitation intensity. The tracked MCSs are further classified into convective core (CC), stratiform rain (SR), and anvil clouds regions. The spatial variability and diurnal cycle of precipitation in the SR regions of MCSs are not as significant as those of MCS precipitation. In the SR regions, the high-resolution, long-term ice cloud microphysical properties [ice water content (IWC) and ice water paths (IWPs)] are provided. The IWCs generally decrease with height. Spatially, the IWC, IWP, and precipitation are all higher over the southern Great Plains than over the northern Great Plains. Seasonally, those ice and precipitation properties are all higher in summer than in spring. Comparing the peak timings of MCS precipitation and IWPs from the diurnal cycles and their composite evolutions, it is found that when using the peak timing of IWPSR as a reference, the heaviest precipitation in the MCS convective core occurs earlier, while the strongest SR precipitation occurs later. The shift of peak timings could be explained by the stratiform precipitation formation process. The IWP and precipitation relationships are different at MCS genesis, mature, and decay stages. The relationships and the transition processes from ice particles to precipitation also depend on the low-level humidity.

54 ENVIRONMENTAL SCIENCES↗

Preservation of fluorescence and Raman gain in the buried channel waveguides in neodymium-doped KGd(WO{sub 4}){sub 2}(Nd:KGW) by femtosecond laser writing

We report on the preservation of fluorescence and Raman gain in low-repetition-rate femtosecond laser written buried channel waveguides in neodymium-doped KGd(WO{sub 4}){sub 2}. The propagation loss index, profile reconstruction, and calculation of the modal intensity distribution by the beam propagation method of the waveguide are presented. Microluminescence spectra of the waveguides show that the fluorescence properties of Nd{sup 3+} ions are not significantly affected by the waveguide formation processing, which indicates a fairly good potential for further laser actions in a compact device. Micro-Raman spectra are also performed to reveal the preservation of the characteristic 768 and 901 cm{sup -1} Raman mode intensities in the guiding regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measuring Radiation Damage Dynamics By Pulsed Ion Beam Irradiation

The major goal of this project is to develop and demonstrate a novel experimental approach to access the dynamic regime of radiation damage formation processes in nuclear materials. In particular, the project exploits a pulsed-ion-beam method in order to gain insight into defect interaction dynamics by measuring effective defect interaction time constants and defect diffusion lengths. For Year 1, this project had the following major milestone: demonstration of the concept of the pulsed ion beam method for a prototypical nuclear ceramic material, SiC. The target date for this milestone is January 1, 2015. As we describe below, this milestone has been met.

36 MATERIALS SCIENCE↗