Search NASA⌕ Search

SEARCH · Search NASA

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Mechanism of β-FeSi{sub 2} precipitates growth-and-dissolution and pyramidal defects' formation during oxidation of Fe-contaminated silicon wafers

Fe-implanted Si-wafers have been oxidized at 900 °C and 1100 °C in order to investigate the behaviour of Fe atoms at the growing SiO{sub 2}/Si interface and the impact on the integrity of microelectronic devices of an involuntary Fe contamination before or during the oxidation process. As-implanted and oxidized wafers have been characterized using secondary ion mass spectroscopy, atom probe tomography, and high-resolution transmission electron microscopy. Experimental results were compared to calculated implantation profiles and simulated images. Successive steps of iron disilicide precipitation and oxidation were evidenced during the silicon oxidation process. The formation of characteristic pyramidal-shaped defects, at the SiO{sub 2}/Si interface, was notably found to correlate with the presence of β-FeSi{sub 2} precipitates. Taking into account the competitive oxidation of these precipitates and of the surrounding silicon matrix, dynamic mechanisms are proposed to model the observed microstructural evolution of the SiO{sub 2}/Si interface, during the growth of the silicon oxide layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation and Assembly-Disassembly Processes of ZnO Hexagonal Pyramids Driven by Dipolar and Excluded Volume Interactions

ZnO hexagonal pyramids were obtained in hydrophilic media without any traditional stabilizers (capping agents). The absence of a thick organic shell reducing the anisotropy of nanoparticle (NP) interactions, oxide nature of the materials, and new geometry of the nanocrystals makes possible the observation of new self-organization phenomena. Several new features not present in the previous cases of NP self-organization were identified and discussed. The formation of ZnO pyramids involved recrystallization of larger amorphous NPs followed by the multistage disassembly of intermediate aggregates into individual virtually perfectly shaped nanocrystals. The evolution of NPs begins with crystallization of clustered plates within the original amorphous spherical colloids, and then agglomerated truncated pyramids are formed. These agglomerates further transform into chained pyramids, which eventually separate from each other. The crystallization and disassembly processes can be associated with the decrease of potential and anisotropy of the attractive force field around the crystallites represented in part by dipole moments. The reassembly of the pyramids can still be attained via engaging excluded volume interaction after adding similarly charged polymer. Overall, in this system, we see the first examples of (1) coupled crystallization and disassembly process; (2) induced assembly of nanoscale particles using excluded volume interactions, which were previously used only for aggregation of microscale colloids; and (3) nanoparticle assemblies with variable and experimentally verifiable relative orientation of dipoles including head-to-tail, tail-to-tail pairs, and antiparallel chains. Described assemblies of ZnO pyramids with collective behavior of individual building blocks as well as distinct and experimentally controlled stages of assembly and disassembly present a fundamentally interesting nanoparticle system with rich dynamic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TENDL: Complete Nuclear Data Library for Innovative Nuclear Science and Technology

The TENDL library is now established as one of the major nuclear data libraries in the world, striving for completeness and quality of nuclear data files for all isotopes, evaluation methods, processing and applied performance. To reach this status, some basic principles have been applied which sets it apart from other libraries: reproducible dedicated evaluations when differential data are available, through determination of nuclear models implemented in TALYS and their parameters, completeness (with or without experimental data), format and processing standardization, automation of production and reproducibility. In this paper, we will outline how such an approach has become a reality, and recall some of the past successes since the first TENDL release in 2008. Next, we will demonstrate the performance of the latest TENDL releases for different application fields, as well as new approaches for uncertainty quantification based on Bayesian inference methods and possible differential and integral adjustments. Also, current limitations of the library performances due to modelling and needs for new and more precise experimental data will be outlined.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In-situ synchrotron micro-diffraction study of surface, interface, grain structure, and strain/stress evolution during Sn whisker/hillock formation

We have performed X-ray synchrotron micro-diffraction measurements to study the processes controlling the formation of hillocks and whiskers in Sn layers on Cu. The studies were done in real-time on Sn layers that were electro-deposited immediately before the X-ray measurements were started. This enabled a region of the sample to be monitored from the as-deposited state until after a hillock feature formed. In addition to measuring the grain orientation and deviatoric strain (via Laue diffraction), the X-ray fluorescence was monitored to quantify the evolution of the Sn surface morphology and the formation of intermetallic compound (IMC) at the Sn-Cu interface. The results capture the simultaneous growth of the feature and the corresponding film stress, grain orientation, and IMC formation. The observations are compared with proposed mechanisms for whisker/hillock growth and nucleation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monte Carlo Simulations of the Corrosion of Aluminoborosilicate Glasses

Aluminum is one of the most common components included in nuclear waste glasses. Therefore, Monte Carlo (MC) simulations were carried out to investigate the influence of aluminum on the rate and mechanism of dissolution of sodium borosilicate glasses in static conditions. The glasses studied were in the compositional range (70-2x)% SiO2 x% Al2O3 15% B2O3 (15+x)% Na2O, where 0 ≤ x ≤ 15%. The simulation results show that increasing amounts of aluminum in the pristine glasses slow down the initial rate of dissolution as determined from the rate of boron release. However, the extent of corrosion - as measured by the total amount of boron release - initially increases with addition of Al2O3, up to 5 Al2O3 mol%, but subsequently decreases with further Al2O3 addition. The MC simulations reveal that this behavior is due to the interplay between two opposing mechanisms: (1) aluminum slows down the kinetics of hydrolysis/condensation reactions that drive the reorganization of the glass surface and eventual formation of a blocking layer; and (2) aluminum strengthens the glass thereby increasing the lifetime of the upper part of its surface and allowing for more rapid formation of a blocking layer. Additional MC simulations were performed whereby a process representing the formation of a secondary aluminosilicate phase was included. Secondary phase formation draws dissolved glass components out of the aqueous solution, thereby diminishing the rate of condensation and delaying the formation of a blocking layer. As a result, the extent of corrosion is found to increase continuously with increasing Al2O3 content, as observed experimentally. For Al2O3 < 10 mol%, the MC simulations also indicate that, because the secondary phase solubility eventually controls the aluminum content in the part of the altered layer in contact with the bulk aqueous solution, the dissolved aluminum and silicon concentrations at steady state are not dependent on the Al2O3 content of the pristine aluminoborosilicate glass.

Environmental Molecular Sciences Laboratory↗

Turning “on” and “off” nucleation and growth: Microwave assisted synthesis of CdS clusters and nanoparticles

Graphical abstract: Display Omitted Highlights: ► Cadmium acetate and DMSO were employed as ion precursors. ► New approach to controlled CdS nanoparticle synthesis. ► CdS clusters and nanoparticles synthesis achieved using microwave irradiation. ► Microwave irradiation turns on and off nanoparticle growth. ► The formation of clusters, embryos and nanoparticles studied with optical spectroscopy. -- Abstract: We report here on the formation of CdS NP from the microwave assisted reaction of Cd(CH{sub 3}CO{sub 2}){sub 2} with dimethylsulfoxide (DMSO). DMSO serves as the solvent and a controlled source of sulfide ions to form (CdS){sub 1≤n≤5} clusters at the early stages of the process. The clusters grow into CdS nanoparticles, with diameters that range from 1.6 nm up to over 250 nm, with microwave heating. The time dependence of the onset of light absorption and absorbance are consistent with a concurrent nucleation and growth processes. The formation of clusters and nuclei and their subsequent reactions is controlled by turning on and off the energy supply consistent with an energy barrier to the formation of CdS nanostructures.

36 MATERIALS SCIENCE↗

Computational Modeling of Atmospheric Processes at Texas Southern University

Texas Southern University (TSU) is strengthening its research program in atmospheric chemistry and physics with a climate science emphasis by leveraging partnerships with the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) Facility, Brookhaven National Laboratory (BNL), and the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). This RDPP-supported program focuses on secondary organic aerosols (SOAs) and reactive atmospheric species that influence cloud formation, precipitation processes, and radiative forcing. SOAs play a critical role in cloud microphysics and Earth’s energy balance, yet the chemical and physical mechanisms governing SOA–cloud interactions remain a significant source of uncertainty in predictive climate models. Through computational modeling, observational data analysis, and national laboratory collaboration, this program develops a skilled cohort of students trained in atmospheric science, environmental data analysis, and climate-relevant modeling. These research experiences build technical competencies that are transferable to careers in government laboratories, academia, and industry. By engaging students from historically underrepresented communities in high-impact climate research, TSU expands participation in the atmospheric sciences workforce while contributing meaningful scientific insights to DOE-supported ARM research activities. This partnership strengthens national capacity in climate science and supports the development of the next generation of atmospheric researchers.

54 ENVIRONMENTAL SCIENCES↗

Hydrothermal synthesis of Mn vanadate nanosheets and visible-light photocatalytic performance for the degradation of methyl blue

Graphical abstract: - Highlights: • Mn vanadate nanosheets have been synthesized by simple hydrothermal process. • The formation of Mn vanadate nanosheets can be controlled by growth conditions. • Mn vanadate nanosheets exhibit good photocatalytic activities for methyl blue. - Abstract: Mn vanadate nanosheets have been synthesized via a facile hydrothermal route using ammonium metavanadate and Mn acetate as the raw materials, polyvinyl pyrrolidone (PVP) as the surfactant. X-ray diffraction (XRD) shows that the Mn vanadate nanosheets are composed of monoclinic MnV{sub 2}O{sub 6} phase. Scanning electron microscopy (SEM) observation indicates that the nanosheets have the average thickness of about 50 nm, length of 2–10 μm and width of 800 nm to 2 μm. The growth process of the Mn vanadate nanosheets has also been discussed based on the analysis of the roles of the growth conditions on the formation of the Mn vanadate nanosheets. The nanosheets show good photocatalytic activities for the degradation of methylene blue (MB) under visible light irradiation. About 72.96% MB can be degraded after visible light irradiation for 1 h over 10 mg Mn vanadate nanosheets in 10 mL MB solution with the concentration of 10 mg L{sup −1}.

36 MATERIALS SCIENCE↗

Chromatographic Modeling of 1-Foot Detritiation Test Column Results for the Optimization of Regeneration Time

This report documents the methods and results of a modeling study on a series of data generated by 1-foot test columns for the Water Detritiation project. In order to compliment modeling work already in progress on this project, a purely empirical curve-fitting approach is used in this study to determine chromatographic performance indicators such as retention time, curve width, and the number of chromatographic stages. The data used in this study comes from four sets of chromatographic test separations performed in March through May of 2017 using 1-foot columns. All are using the same flow rates and temperature (room temperature, nominally 25 C°). The first set of data (referred to in this report as the Column 1 data) is a series of twelve breakthrough curve measurements. Prior to each of these twelve runs, the column was regenerated by flowing hydrogen gas through the column, for increasing amounts of time, ranging from 2 hours to 25 hours. The second set of data (referred to as the Column 2 data) is comprised of five measurements of breakthrough curves measured in similar fashion as the Column 1 data, across a range of regeneration times from 2 to 21 hours. The third set of data (referred to as the Purge data) is of three breakthrough curves, measured after a regeneration time of 8 hours, which takes place after a nitrogen purge of 15, 30, or 45 minutes. The fourth data set is a series of five breakthrough curve measurements using a 2 nd batch of stationary phase, taken after regeneration times ranging from 2 to 20 hours. The overall modeling approach is as follows. First, the data is pre-processed for formatting, artifact removal, and is normalized. The data is then fit by integrated versions of four common chromatographic models. The best model is chosen based on the predictive performance of the model, and chromatographic performance values are calculated based on the best model’s fit parameters. Each of these processes are detailed below.

42 ENGINEERING↗

Molecular beam epitaxy of III-P{sub x}As{sub 1−x} solid solutions: Mechanism of composition formation in the sublattice of a group V element

The effect of substrate temperature, As{sub 2} and P{sub 2} molecular flux densities, and growth rate on the composition of III-P{sub x}As{sub 1−x} solid solution layers prepared by molecular beam epitaxy is experimentally investigated. Experimental data in a wide range of growth conditions are analyzed. The results obtained are presented in the form of a kinetic model for describing the process of formation of the composition in the Group V sublattice of the III-P{sub x}As{sub 1−x} solid solution upon molecular beam epitaxy. The model can be used for choosing the growth conditions of the III-P{sub x}As{sub 1−x} (001) solid-solution layers of a specified composition.

36 MATERIALS SCIENCE↗

An Integrated Flame Spray Process for Low Cost Production of Battery Materials for Lithium Ion Batteries and Beyond

The overall objective of this project was to develop an advanced manufacturing technology for Li-ion battery materials production at low cost and in a green chemical process using glycerol as solvent to replace water. It was aimed at developing a prototype pilot production line to reduce production cost by at least 25% to the baseline. During the course of this project, research was conducted to understand spray drying and combustion of eutectic solvent precursors of glycerol and metal salts (acetates) in the formation of mixed metal oxide powders. Reactor design and optimization were done to facilitate spray drying and combustion in powder formation and processing. Various cathode materials powders were produced, including lithium nickel-cobalt-manganese oxide (NCM) and lithium nickel-cobalt-aluminum oxide (NCA). These cathode materials powders were tested in half coin cells for their performances, with materials performances of 160 mAh/g for NCM111 and 200 mAh/g for NCA. NCA powders were also produced using a slurry spray-drying process and tested in full pouch cells. A pilot scale flame assisted spray drying reactor was constructed and demonstrated for its production rate exceeding the target of production rate of four metric tons per year. The work performed in this project has been documented in 9 peer reviewed journal publications, 8 conference presentations, and two IP disclosures/patent applications.

25 ENERGY STORAGE↗

The Impact of Ethylenediaminetetraacetic Acid (EDTA) on the Sorption of Nd(III), Th{sup (IV)}, and U(VI) onto Dolomite in WIPP-Relevant Brines, GWB and ERDA-6 - 20356

Storage of legacy, transuranic waste at the Waste Isolation Pilot Plant (WIPP) requires accurate risk models for performance assessments. These models must predict the long-term fate and transport of contaminants in the WIPP and surrounding environment. Laboratory support is necessary for the development of an accurate model through better understanding of contaminant behavior in the WIPP. The WIPP is a deep geologic repository that is characterized by high ionic strength due to evaporite deposits in the Salado formation (porewaters up to 7.4 M). High concentrations of sodium chloride (NaCl), calcium chloride (CaCl{sub 2}), and magnesium chloride (MgCl{sub 2}) are particularly of concern due to their potential impact on solubility and ultimately transport of contaminants of concern. Additionally, ligands capable of forming strong complexes with metals are found in significant concentrations in the WIPP environment due to their disposal from waste processing and formation during degradation of repository components (e.g. cellulose degradation by calcium hydroxide in cement). Consequently, there is a need to investigate the fate and transport of contaminants in the WIPP environment with a focus on the effects of high ionic strength and strongly coordinating ligands. Contaminants of high concern include the actinides (U(VI), Pu(IV), and Am(III)). Laboratory support of the WIPP modeling efforts was provided by this research. A series of batch experiments were utilized to study the impact of ionic strength, contaminant concentration, and the presence of ethylenediaminetetraacetic acid (EDTA) on the sorption of Nd(III), Th(IV), and U(VI) onto dolomite, a carbonate mineral found within the Culebra formation. The Culebra formation is the most transmissive layer above the WIPP, making transport of contaminants the most likely route in previous risk assessments. Two brines specifically designed to imitate conditions within the WIPP environment were used in these experiments. The U.S. Energy Research and Development Administration Well 6 (ERDA-6, 95%) brine simulates a low Mg environment, while the generic weep brine (GWB, 95%) simulates the WIPP environment with a high Mg concentration. Mg is added to the repository in the form of MgO as an engineered barrier and is naturally present in some formations. It is expected to scavenge carbonate from solutions decreasing formation of the highly soluble and competitive uranium-carbonate complexes. EDTA is used during manipulations of nuclear materials due to its ability to form strong, stable complexes with the actinides and may be found in high concentrations (up to 0.08 mM) within the WIPP as waste canisters degrade. Further, it may provide additional avenues for unwanted transport of contaminants. Nd(III) and Th(IV) were used as stable analogues of Am(III) and Pu(IV), respectively, to represent the most common oxidation states of actinides in the WIPP environment in addition to U(VI). The potential for colloid formation was also investigated with low and high concentrations of contaminants (10 and 1000 μg/L) using three size-dependent particle separation steps. The results of this research provide a better understanding of potential behavior of actinides in the presence of EDTA and within WIPP-relevant brines. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In situ feature analysis for large-scale multiphase flow simulations

The study of multiphase flow is essential for designing chemical reactors such as fluidized bed reactors (FBR), as a detailed understanding of hydrodynamics is critical for optimizing reactor performance and stability. An FBR allows scientists to conduct different types of chemical reactions involving multiphase materials, especially interaction between gas and solids. During such complex chemical processes, the formation of void regions in the reactor, generally termed as bubbles, is an important phenomenon. The study of these bubbles has a deep implication in predicting the reactor’s overall efficiency. But physical experiments needed to understand bubble dynamics are costly and non-trivial due to the technical difficulties involved and harsh working conditions of the reactors. Therefore, to study such chemical processes and bubble dynamics, a state-of-the-art computational simulation MFIX-Exa is being developed. Despite the proven accuracy of MFIX-Exa in modeling bubbling phenomena, the large-scale output data prohibits the use of traditional post hoc analysis capabilities in both storage and I/O time. Herein, to address these issues and allow the application scientists to explore the bubble dynamics in an efficient and timely manner, we have developed an end-to-end analytics pipeline that enables in situ detection of bubbles, followed by a flexible post hoc visual exploration methodology of bubble dynamics. The proposed method enables interactive analysis of bubbles, along with quantification of several bubble characteristics, enabling experts to understand the bubble interactions in detail. Positive feedback from the experts has indicated the efficacy of the proposed approach for exploring bubble dynamics in very-large-scale multiphase flow simulations.

97 MATHEMATICS AND COMPUTING↗

Using geothermal energy to heat a portion of a formation for an in situ heat treatment process

Methods of using geothermal energy to treat subsurface formations are described herein. Methods for using geothermal energy to treat a subsurface treatment area containing or proximate to hydrocarbons may include producing geothermally heated fluid from at least one subsurface region. Heat from at least a portion of the geothermally heated fluid may be transferred to the subsurface treatment area to heat the subsurface treatment area. At least some hydrocarbon fluids may be produced from the formation.

15 GEOTHERMAL ENERGY↗

Study of clusters and hypernuclei production with the NICA/MPD experiment

Heavy-ion collisions provide the unique possibility to create and investigate hot and dense matter in the laboratory. At the initial stage of the reaction a QGP is formed, while the final stage is driven by the hadronization process and the formation of clusters. The capture of the produced hyperons by clusters of nucleons leads to the hypernuclei formation which is a very rare process at strangeness threshold energies. We report on the first results on the dynamical modeling of cluster formation with the combined PHSD + SACA (Parton–Hadron–Strings dynamics + Simulated Annealing Clusterization Algorithm) model at Nuclotron and NICA energies. The clusters selection in SACA is realized by a simulated annealing procedure to obtain the most bound configuration of fragments and nucleons. Based on present predictions of the combined model we study the possibility to detect such clusters and hypernuclei in the NICA/MPD detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE X-FACTOR IN GALAXIES. II. THE MOLECULAR-HYDROGEN-STAR-FORMATION RELATION

There is ample observational evidence that the star formation rate (SFR) surface density, {Sigma}{sub SFR}, is closely correlated with the surface density of molecular hydrogen, {Sigma}{sub H{sub 2}}. This empirical relation holds both for galaxy-wide averages and for individual {approx}>kpc sized patches of the interstellar medium, but appears to degrade substantially at a sub-kpc scale. Identifying the physical mechanisms that determine the scale-dependent properties of the observed {Sigma}{sub H{sub 2}}-{Sigma}{sub SFR} relation using a set of cosmological, galaxy formation simulations with a peak resolution of {approx}100 pc. These simulations include a chemical network for molecular hydrogen, a model for the CO emission, and a simple, stochastic prescription for star formation that operates on {approx}100 pc scales. Specifically, star formation is modeled as a Poisson process in which the average SFR is directly proportional to the present mass of H{sub 2}. The predictions of our numerical model are in good agreement with the observed Kennicutt-Schmidt and {Sigma}{sub H{sub 2}}-{Sigma}{sub SFR} relations. We show that observations based on CO emission are ill suited to reliably measure the slope of the latter relation at low ({approx}< 20 M {sub Sun} pc{sup -2}) H{sub 2} surface densities on sub-kpc scales. Our models also predict that the inferred {Sigma}{sub H{sub 2}}-{Sigma}{sub SFR} relation steepens at high H{sub 2} surface densities as a result of the surface density dependence of the CO/H{sub 2} conversion factor. Finally, we show that on sub-kpc scales most of the scatter of the relation is a consequence of discreteness effects of the star formation process. In contrast, variations of the CO/H{sub 2} conversion factor are responsible for most of the scatter measured on super-kpc scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Liquid microjunction surface sampling probe fluid dynamics: Characterization and application of an analyte plug formation operational mode

The recently discovered sample plug formation and injection operational mode of a continuous flow, coaxial tube geometry, liquid microjunction surface sampling probe (LMJ-SSP) (J. Am. Soc. Mass Spectrom, 2011) was further characterized and applied for concentration and mixing of analyte extracted from multiple areas on a surface and for nanoliter-scale chemical reactions of sampled material. A transparent LMJ-SSP was constructed and colored analytes were used so that the surface sampling process, plug formation, and the chemical reactions could be visually monitored at the sampling end of the probe before being analyzed by mass spectrometry of the injected sample plug. Injection plug peak widths were consistent for plug hold times as long as the 8 minute maximum attempted (RSD below 1.5%). Furthermore, integrated injection peak signals were not significantly different for the range of hold times investigated. The ability to extract and completely mix individual samples within a fixed volume at the sampling end of the probe was demonstrated and a linear mass spectral response to the number of equivalent analyte spots sampled was observed. Lastly, using the color and mass changing chemical reduction of the redox dye 2,6-dichlorophenol-indophenol with ascorbic acid, the ability to sample, concentrate, and efficiently run reactions within the same plug volume within the probe was demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Air Capture Using Aqueous Amino Acid Solvents in a Crossflow Absorber

Carbon dioxide (CO 2 ) is the most abundant of all greenhouse gases (GHGs). CO 2 levels in the atmosphere are 50% higher than in the preindustrial era, trapping heat. CO 2 removal from the atmosphere by direct air capture (DAC) is needed to achieve the internationally agreed global temperature goals. The most common CO 2 capture technology is absorption by aminebased solvents in packed columns. Amino acid solutions have recently gained attention due to their advantages over traditional amine solvents. To be implemented effectively, DAC industrial processes need to handle large airflow rates in separation absorbers. The large air and solvent flow rates preclude the use of countercurrent columns due to high-pressure drops and the occurrence of flooding. Crossflow air−liquid absorbers are used to handle large air and liquid volumes due to their lower-pressure drop. The objective of this work is to study the influence of crossflow absorber geometric parameters and operating conditions on product formation and process efficiency. An already derived theoretical model for countercurrent absorbers has been modified to simulate the operation of a crossflow DAC absorber. The predictive model was implemented into a computer code that was used to study the efficiency of the processes as geometric equipment dimensions and operating parameters vary. Practical suggestions are made to design more efficient DAC processes.

Absorption↗