Search NASA⌕ Search

SEARCH · Search NASA

Results for “gravity currents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Gravity Well Commercial Economics Assessment: Potential Revenue and Cost: Cooperative Research and Development (Final Report)

In the Gravity Well Revenue Study, we evaluate the potential revenue from energy storage using historical energy-only electricity prices, forward-looking projections of hourly electricity prices, and actual reported revenue. This analysis examines the impact of storage duration and round-trip efficiency, as well as the location of the storage, on storage revenue within the current and projected U.S. power system. We also investigated the impact of round-trip efficiency on storage revenue. We found that the relationship between storage revenue and round-trip efficiency is nonlinear. The value of improved round-trip efficiency declines as round-trip efficiency increases. In the Gravity Well Future Cost Study, we applied learning curves to predict the future cost trajectory of Gravity Wells (GrWs). Two types of analysis were implemented. The first was a bottom-up analysis that used historical learning rates for cost components, such as motors and gearboxes, and cost categories (e.g., engineering and design, etc.) to determine the learning-by-doing based single-factor learning curve. The single factor learning curve expresses the relationship between the cost of GrW and the number of units deployed (or the cumulative capacity). In the second analysis, we predicted future GrW costs via a top-down approach. This approach accounts for historical cost trends in other renewable energy and storage technologies, which have similarities with GrWs. Using a multifactor learning curve that accounts for both intrinsic (cumulative capacity) and extrinsic (the elasticity in the price of steel) factors, we estimated the future cost of GrWs.

25 ENERGY STORAGE↗

Feasibility Study of a Multi Tilt-rotor Aircraft as the Artemis Lunar Training Vehicle

The Lunar Landing Research Vehicles (LLRVs) and the Lunar Landing Training Vehicles (LLTVs) provided astronaut candidates for the Apollo program with essential experience and confidence required to complete the missions, and contributed to six successful manned landings on the moon. The primary challenge in terrestrial training was being able to replicate the ratio of bank angle to linear acceleration that a pilot would experience in lunar gravity. Presently, as the Artemis program seeks to return humans to the Moon by 2025, engineers are evaluating suitable platforms to serve as an In-Flight Trainer (IFT) or Artemis Lunar Training Vehicle (ALTV) for astronauts training in the task of manual landing. The program is investigating the viability of current technology in the field of electric vertical takeoff and landing (eVTOL) vehicles and is evaluating using a multi tilt-rotor aircraft platform as a candidate platform for a preliminary ALTV. The tilt-rotor capability enables the vehicle attitude to be decoupled from its flight path, which is a crucial requirement in realistically simulating lunar gravity on Earth. Other key considerations include compensating for a lack of aerodynamic forces while flying through the atmosphere of Earth, as well as the ability to simulate the dynamics of multiple different lander designs for the Human Landing System (HLS) program. This paper details the feasibility study and presents a preliminary flight control architecture for an IFT based on a notional multi tilt-rotor platform. The modeling-following control law, based on nonlinear dynamic inversion (NDI), removes the need for gain scheduling because the vehicle operates across a wide range of flight conditions. The inner-loop dynamic control allocation strategy consists of a static portion that is optimized offline for trim while compensating for the difference in gravity and a dynamic portion that is computed in real time. The reference model consists of the full closed-loop dynamics of a generic HLS design. The modularity of the flight control architecture enables evaluation of multiple HLS concepts with minimal modifications to the control law. Simulation results of the multi tilt-rotor configuration following the final portion of the Apollo 11 descent trajectory are shown.

Jing Pei↗

Segregation effects during solidification in weightless melts

Computer programs are developed and used in the study of the combined effects of evaporation and solidification in space processing. The temperature and solute concentration profiles during directional solidification of binary alloys with surface evaporation were mathematically formulated. Computer results are included along with an econotechnical model of crystal growth. This model allows: prediction of crystal size, quality, and cost; systematic selection of the best growth equipment or alloy system; optimization of growth or material parameters; and a maximization of zero-gravity effects. Segregation in GaAs crystals was examined along with vibration effects on GaAs crystal growth. It was found that a unique segregation pattern and strong convention currents exist in GaAs crystal growth. Some beneficial effects from vibration during GaAs growth were discovered. The implications of the results in space processing are indicated.

Li, C.↗

The reduction, verification and interpretation of MAGSAT magnetic data over Canada

Consideration is being given to representing the magnetic field in the area 40 deg N to 83 deg N by means of functions in spherical coordinates. A solution to Laplace's equation for the magnetic potential over a restricted area was found, and programming and testing are currently being carried out. Magnetic anomaly modelling is proceeding. The program SPHERE, which was adapted to function correctly on the Cyber computer, is now operational, for deriving gravity and magnetic models in a spherical coordinate system.

Coles, R. L.↗

Fluid handling 2: Surgical applications

The methods proposed for managing fluids and particulate debris during minor surgery on Space Station Freedom (SSF) were investigated and demonstrated. A KC-135 parabolic flight test was performed, in which the flight followed the standard 40 parabola profile with 20 to 25 seconds in near-zero gravity in each parabola. The equipment (suction and laminar flow device) was evaluated. While this equipment performed satisfactorily previously in the dental simulation, the purpose of the current flight was to reconfigure the equipment in support of a minor surgical situation in order to evaluate its efficacy and establish clear requirements for the actual flight hardware. To accomplish the study the Health Maintenance Facility medical restraint system was deployed as for surgical use and mannequin suture arm was restrained to its surface. The surgical area was established as for performing minor surgery with standard tray and suture instruments employed.

Billica, Roger↗

Radar Observations of Asteroid 1620 Geographos

Goldstone radar observations of Geographos from August 28 through September 2, 1994 yield over 400 delay-Doppler images whose linear spatial resolutions range from approx. 75 to approx. 151 in, and 138 pairs of dual-polarization (OC, SC) spectra with one-dimensional resolution of 103 m. Each data type provides thorough rotational coverage. The images contain an intrinsic north/south ambiguity, but the equatorial view allows accurate determination of the shape of the radar-facing part of the asteroid's pole-on silhouette at any rotation phase. Sums of co-registered images that cover nearly a full rotation have defined the extremely elongated shape of that silhouette. Here we present individual images and co-registered sums over approx. 30 deg of rotation phase that show the silhouette's structural characteristics in finer detail and also reveal numerous contrast features "inside" the silhouette. Those features include several candidate craters as well as indications of other sorts of large-scale topographic relief, including a prominent central indentation. Protuberances at the asteroid's ends may be related to the pattern of ejecta removal and deposition caused by the asteroid's gravity field. The asteroid's surface is homogeneous and displays only modest roughness at centimeter-to-meter scales. Our estimates of radar cross section and the currently available constraints on the asteroid's dimensions are consistent with a near-surface bulk density between 2 and 3 g/cu cm. The delay-Doppler trajectory of Geographos' center of mass has been determined to about 200 m on August 28 and to about 100 m on August 31, an improvement of two orders of magnitude over pre-observation ephemerides.

Ostro, Steven J.↗

Radar Observations of Asteroid 1620 Geographos

Goldstone radar observations of Geographos from August 28 through September 2, 1994 yield over 400 delay-Doppler images whose linear spatial resolutions range from approximately 75 - 151 m, and 138 pairs of dual-polarization (OC, SC) spectra with one-dimensional resolution of 103 m. Each data type provides thorough rotational coverage. The images contain an intrinsic north/south ambiguity, but the equatorial view allows accurate determination of the shape of the radar-facing part of the asteroid's pole-on silhouette at any rotation phase. Sums of co-registered images that cover nearly a full rotation have defined the extremely elongated shape of that silhouette (S. J. Ostro, K. D. Rosema, R. S. Hudson, R. F. Jurgens, J. D. Giorgini, R. Winkler, D. K. Yeomans, D. Choate, R. Rose, M. A. Slade, S. D. Howard, and D. L. Mitchell 1995, Nature 375, 474-477). Here we present individual images and co-registered sums over approximately 30 deg of rotation phase that show the silhouette's structural characteristics in finer detail and also reveal numerous contrast features "inside" the silhouette. Those features include several candidate craters as well as indications of other sorts of large-scale topographic relief, including a prominent central indentation. Protuberances at the asteroid's ends may be related to the pattern of ejecta removal and deposition caused by the asteroid's gravity field. The asteroid's surface is homogeneous and displays only modest roughness at centimeter-to-meter scales. Our estimates of radar cross section and the currently available constraints on the asteroid's dimensions are consistent with a near-surface bulk density between 2 and 3 g/cc. The delay-Doppler trajectory of Geographos' center of mass has been determined to about 200 m on August 28 and to about 100 m on August 31, an improvement of two orders of magnitude over pre-observation ephemerides.

Ostro, Steven J.↗

Initial Results from the Jovian Electrodynamic Tether Systems (JETS) Study

The Jovian system with its rapid planetary rotation and strong magnetic field presents exciting opportunities for the use of electrodynamic (EM) tethers in system applications on a Jovian spacecraft. Previous analysis for a radial, 10 km length tether demonstrated the possibility of propulsive forces as large as 50 N and power generation levels as high as 10(exp 6) W for low perijov passing trajectories. For orbital positions beyond approximately 2.5 Jovian radii, JETS can be used simultaneously for power and increases in the orbital altitude. Previous study demonstrated the physical feasibility of EM tether use at Jupiter, but did not address the issues of limited gravity gradient force for tether extension and power regulation needed before JETS can be implemented as a practical spacecraft system. This presentation will discuss these issues and current progress in an ongoing systems feasibility study.

Gallagher, D. L.↗

Initial Results From The Jovian Electrodynamic Tether Systems (JETS) Study

The Jovian system with its rapid planetary rotation and strong magnetic field presents exciting opportunities for the use of electrodynamic (EM) tethers in system applications on a Jovian spacecraft. Previous analysis for a radial, 10-km length tether demonstrated the possibility of propulsive forces as large as 50 N and power generation levels as high as 10^6 W for low perijov passing trajectories. For orbital positions beyond approximately 15 Jovian radii, JETS can be used simultaneously for power and increases in the orbital altitude. Previous study demonstrated the physical feasibility of EM tether use at Jupiter, but did not address the issues of limited gravity gradient force for tether extension and power regulation needed before JETS can be implemented as a practical spacecraft system. This presentation will discuss these issues and current progress in an ongoing systems feasibility study.

Gallagher, D. L.↗

Radar Observations of Asteroid 1620 Geographos

Goldstone radar observations of Geographos from Aug. 28 through Sep. 2, 1994, yield over 400 delay-Doppler images whose linear spatial resolutions range from ~75 m to ~151 m, and 138 pairs of dual-polarization (OC, SC) spectra with one-dimensional resolution of 103 m. Each data type provides thorough rotational coverage. The images contain an intrinsic north/south ambiguity, but the equatorial view allows accurate determination of the shape of the radar-facing part of the asteroid's pole-on silhouette at any rotation phase. Sums of co-registered images that cover nearly a full rotation have defined the extremely elongated shape of that silhouette (Ostro et al. 1995, Nature 375, 474-477). Here we present individual images and co-registered sums over ~30û of rotation phase that show the silhouette's structural characteristics in finer detail and also reveal numerous contrast features "inside" the silhouette. Those features include several candidate craters as well as indications of other sorts of large-scale topographic relief, including a prominent central indentation. Protuberances at the asteroid's ends may be related to the pattern of ejecta removal and deposition caused by the asteroid's gravity field. The asteroid's surface is homogeneous and displays only modest roughness at centimeter-to-meter scales. Our estimates of radar cross section and the currently available constraints on the asteroid's dimensions are consistent with a near-surface bulk density between 2 and 3 g cm-3. The delay-Doppler trajectory of Geographos' center of mass has been determined to about 200 m on Aug. 28 and to about 100 m on Aug. 31, an improvement of two orders of magnitude over pre-observation ephemerides.

Asteroid↗

NASA's Ground-Based Microgravity Simulation Facility

Since opportunities to conduct experiments in space are scarce, various microgravity simulators and analogs have been widely used in space biology ground studies. Even though microgravity simulators do not produce all of the biological effects observed in the true microgravity environment, they provide alternative test platforms that are effective, affordable, and readily available to facilitate microgravity research. The Microgravity Simulation Support Facility (MSSF) at the National Aeronautics and Space Administration (NASA) John F. Kennedy Space Center (KSC) has been established for conducting short duration experiments, typically less than 1 month, utilizing a variety of microgravity simulation devices for research at different gravity levels. The simulators include, but are not limited to, 2D Clinostats, 3D Clinostats, Random Positioning Machines, and Rotating Wall Vessels. In this chapter, we will discuss current MSSF capabilities, development concepts, customized sample holder designs, and the physical characteristics of these microgravity simulators.

Ye Zhang↗

PROBING THE EXISTENCE OF A DARK MATTER ISOTHERMAL CORE USING GRAVITY MODES

Although helioseismology has been used as an effective tool for studying the physical mechanisms acting in most of the solar interior, the microscopic level and the dynamics of the deep core are still not well understood. Helioseismological anomalies may be partially resolved if the Sun captures light, non-annihilating dark matter particles, a currently discussed dark matter candidate that is motivated by recent direct detection limits. Once trapped, such particles (4-10 GeV) naturally fill the solar core. With the use of a well-defined stellar evolution code that takes into account an accurate description of the capture of dark matter particles by the Sun, we investigate the impact of such particles in its inner core. Even a relatively small amount of dark matter particles in the solar core will leave an imprint on the absolute frequency values of gravity modes as well as the equidistant spacing between modes of the same degree. The period separation for gravity modes could reveal changes of up to 3% for annihilating dark matter and of up to 20% for non-annihilating dark matter. This effect is most pronounced in the case of the gravity dipole (l = 1) modes.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparative Soot Diagnostics: Preliminary Results

The motivation for the Comparative Soot Diagnostics (CSD) experiment lies in the broad practical importance of understanding combustion generated particulate. Depending upon the circumstances, particulate matter can affect the durability and performance of combustion equipment, can be a pollutant, can be used to detect fires and, in the form of soot, can be the dominant source of radiant energy from flames. The nonbuoyant structure of most flames of practical interest makes understanding of soot processes in low gravity flames important to our ability to predict fire behavior on earth. These studies also have direct applications to fire safety in human-crew spacecraft, since smoke is the indicator used for automated detection in current spacecraft. In the earliest missions (Mercury, Gemini and Apollo), the crew quarters were so cramped that it was considered reasonable that the astronauts would rapidly detect any fire. The Skylab module, however, included approximately 20 UV-sensing fire detectors. The Space Shuttle has 9 particle-ionization smoke detectors in the mid-deck and flight deck and Spacelab has six additional particle-ionization smoke detectors. The designated detectors for the ISS are laser-diode, forward-scattering, smoke or particulate detectors. Current plans for the ISS call for two detectors in the open area of the module, and detectors in racks that have both cooling air flow and electrical power. Due to the complete absence of data concerning the nature of particulate and radiant emission from incipient and fully developed low-g fires, all three of these detector systems were designed based upon l-g test data and experience. As planned mission durations and complexity increase and the volume of spacecraft increases, the need for and importance of effective, crew-independent, fire detection grows significantly. To provide this level of protection, more knowledge is needed concerning low-gravity fire phenomena and, in particular, how they might be detected and suppressed. Prior to CSD, no combustion-generated particulate samples had been collected near the flame zone for well-developed microgravity flames. All of the extant data either came from drop tower tests and therefore only corresponded to the early stages of a fire or were collected far from the flame zone. The fuel sources in the drop tower tests were restricted to laminar gas-jet diffusion flames and very rapidly overheated wire insulation. The gas-jet tests indicated, through thermophoretic sampling, (2) that soot primaries and aggregates (groups of primary particles) in low-gravity may be significantly larger than those in normal gravity (1-g). This raises new scientific questions about soot processes as well as practical issues for particulate size sensitivity and detection alarm threshold levels used in on-orbit smoke detectors. Preliminary tests in the 2.2 second drop tower suggest that particulate generated by overheated wire insulation may be larger in low-g than in 1-g. Transmission Electron Microscope (TEM) grids downstream of the fire region in the Wire Insulation Flammability experiment as well as visual observation of long string-like aggregates, further confirm this suggestion. The combined impact of these limited results and theoretical predictions is that, as opposed to extrapolation from l-g data, direct knowledge of low-g combustion particulate is needed for more confident design of smoke detectors for spacecraft. This paper describes the operation and preliminary results of the CSD, a project conceived and developed at NASA Lewis Research Center. The CSD flight experiment was conducted in the Middeck Glovebox Facility (MGBX) on USMP-3. The project is support by NASA Headquarters Microgravity Science and Applications Division and Code Q. The results presented here are from the microgravity portion of the experiment, including the temporal response of the detectors and average sizes of the primary and aggregate particles captured on the thermophoretic probes.

Urban, David L.↗

Constraints on standard and non-standard early universe models from CMB B-mode polarization

We investigate the observational signatures of three models of the early Universe in the B-mode polarization of the Cosmic Microwave Background (CMB) radiation. In addition to the standard single field inflationary model, we also consider the constraints obtainable on the loop quantum cosmology model (from Loop Quantum Gravity) and on cosmic strings, expected to be copiously produced during the latter stages of Brane inflation. We first examine the observational features of the three models, and then use current B-mode polarization data from the BICEP and QUaD experiments to constrain their parameters. We also examine the detectability of the primordial B-mode signal predicted by these models and forecast the parameter constraints achievable with future CMB polarization experiments. We find that: (a) since B-mode polarization measurements are mostly unaffected by parameter degeneracies, they provide the cleanest probe of these early Universe models; (b) using the BICEP and QUaD data we obtain the following parameter constraints: r = 0.02{sup +0.31}{sub −0.26} (1σ for the tensor-to-scalar ratio in the single field inflationary model); m < 1.36 × 10{sup −8}M{sub pl} and k{sub *} < 2.43 × 10{sup −4} Mpc{sup −1} (1σ for the mass and scale parameters in the loop quantum cosmology model); and Gμ < 5.77 × 10{sup −7} (1σ for the cosmic string tension); (c) future CMB observations (both satellite missions and forthcoming sub-orbital experiments) will provide much more rigorous tests of these early Universe models.

79 ASTRONOMY AND ASTROPHYSICS↗

Materials Science

The Materials Science Program is structured so that NASA s headquarters is responsible for the program content and selection, through the Enterprise Scientist, and MSFC provides for implementation of ground and flight programs with a Discipline Scientist and Discipline Manager. The Discipline Working Group of eminent scientists from outside of NASA acts in an advisory capacity and writes the Discipline Document from which the NRA content is derived. The program is reviewed approximately every three years by groups such as the Committee on Microgravity Research, the National Materials Advisory Board, and the OBPR Maximization and Prioritization (ReMaP) Task Force. The flight program has had as many as twenty-six principal investigators (PIs) in flight or flight definition stage, with the numbers of PIs in the future dependent on the results of the ReMaP Task Force and internal reviews. Each project has a NASA-appointed Project Scientist, considered a half-time job, who assists the PI in understanding and preparing for internal reviews such as the Science Concept Review and Requirements Definition Review. The Project Scientist also insures that the PI gets the maximum science support from MSFC, represents the PI to the MSFC community, and collaborates with the Project Manager to insure the project is well-supported and remains vital. Currently available flight equipment includes the Materials Science Research Rack (MSRR-1) and Microgravity Science Glovebox. Ground based projects fall into one or more of several categories. Intellectual Underpinning of Flight Program projects include theoretical studies backed by modeling and computer simulations; bring to maturity new research, often by young researchers, and may include preliminary short duration low gravity experiments in the KC-135 aircraft or drop tube; enable characterization of data sets from previous flights; and provide thermophysical property determinations to aid PIs. Radiation Shielding and preliminary In Situ Resource Utilization (ISRU) studies work towards future long duration missions. Biomaterials support materials issues affecting crew health. Nanostructured Materials are currently considered to be maturing new research, and Advanced Materials for Space Transportation has as yet no PIs. PIs are assigned a NASA Technical Monitor to maintain contact, a position considered to be a 5 percent per PI effort. Currently 33 PIs are supported on the 1996 NRA, which is about to expire, and 59 on the 1998 NRA. Two new NRAs, one for Radiation Shielding and one for Materials Science for Advanced Space Propulsion are due to be announced by the 2003 fiscal year. MSFC has a number of facilities supporting materials science. These include the Microgravity Development Laboratory/SD43; Electrostatic Levitator Facility; SCN Purification Facility; Electron Microscope/Microprobe Facility; Static and Rotating Magnetic Field Facility; X-Ray Diffraction Facility; and the Furnace Development Laboratory.

Source record↗

A Numerical Investigation of the Effect of Thermoelectromagnetic Convection (TEMC) on the Bridgman Growth of Ge(1-x)Si(x)

Thermoelectric currents at the growth interface of GeSi during Bridgman growth are shown to promote convection when a low intensity axial magnetic field is applied. TEMC, typically, is characterized by a meridional flow driven by the rotation of the fluid; meridional convection alters composition of the melt, and shape of the growth interface substantially. TEMC effect is more important in micro-gravity environment than the terrestrial one, and can be used to control convection during the growth of GeSi. In this work, coupled thermo-solutal flow equations (energy, scalar transport, momentum and mass) are solved in tandem with Maxwell's equations to compute the thermo-solutat flow field, electric currents, and the growth-interface shape.

Yesilyurt, Serhat↗

Observations of vertical winds and the origin of thermospheric gravity waves launched by auroral substorms and westward travelling surges

Several sequences of observations of strong vertical winds in the upper thermosphere are discussed, in conjunction with models of the generation of such winds. In the auroral oval, the strongest upward winds are observed in or close to regions of intense auroral precipitation and strong ionospheric currents. The strongest winds, of the order of 100 to 200 m/sec are usually upward, and are both localized and of relatively short duration (10 to 20 min). In regions adjacent to those displaying strong upward winds, and following periods of upward winds, downward winds of rather lower magnitude (40 to about 80 m/sec) may be observed. Strong and rapid changes of horizontal winds are correlated with these rapid vertical wind variations. Considered from a large scale viewpoint, this class of strongly time dependent winds propagate globally, and may be considered to be gravity waves launched from an auroral source. During periods of very disturbed geomagnetic activity, there may be regions within and close to the auroral oval where systematic vertical winds of the order of 50 m/sec will occur for periods of several hours. Such persistent winds are part of a very strong large scale horizontal wind circulation set up in the polar regions during a major geomagnetic disturbance. This second class of strong horizontal and vertical winds corresponds more to a standing wave than to a gravity wave, and it is not as effective as the first class in generating large scale propagating gravity waves and correlated horizontal and vertical oscillations. A third class of significant (10 to 30 m/sec) vertical winds can be associated with systematic features of the average geomagnetic energy and momentum input to the polar thermosphere, and appear in statistical studies of the average vertical wind as a function of Universal Time at a given location.

Rees, D.↗

Materials Science Research Rack Onboard the International Space Station Hardware and Operations

The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and ESA for materials science investigations on the International Space Station (ISS). MSRR was launched on STS-128 in August 2009, and is currently installed in the U.S. Destiny Laboratory Module. Since that time, MSRR has performed virtually flawlessly, logging more than 620 hours of operating time. The MSRR accommodates advanced investigations in the microgravity environment on the ISS for basic materials science research in areas such as solidification of metals and alloys. The purpose is to advance the scientific understanding of materials processing as affected by microgravity and to gain insight into the physical behavior of materials processing. MSRR allows for the study of a variety of materials including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. Currently the NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA developed Materials Science Laboratory (MSL) which accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample-Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400 C. Once an SCA is installed, the experiment can be run by automatic command or science conducted via telemetry commands from the ground. Initially, 12 SCAs were processed in the first furnace insert for a team of European and US investigators. After these samples were processed the Furnaces Inserts were exchanged and an additional single sample was processed. The processed samples have been returned to Earth for evaluation and comparison of their properties to samples similarly processed on the ground. A preliminary examination of the samples indicates that the majority of the desired science objectives have been successfully met leading to significant improvements in the understanding of alloy solidification processes. Six SCAs were launched on Space Shuttle Mission STS-135 in July 2011 for processing during the Fall of 2011. Additional batches are planned for future processing. This facility is available to support additional materials science investigations through programs such as the US National Laboratory, Technology Development, NASA Research Announcements, and others.

Lehman, John R.↗