Search NASA⌕ Search

SEARCH · Search NASA

Results for “high modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

High-pressure deformation of metallic glass nanoparticles

Here, the atomistic structure of metallic glasses is closely related to properties such as strength and ductility. Here, Ni 1-x B x metallic glass nanoparticles of two different sizes are compressed under quasi-hydrostatic high-pressure conditions in order to understand structural changes under stress. The structural changes in the nanoparticles were tracked using in situ high-pressure X-ray diffraction (XRD). The ambient pressure pair distribution functions generated from XRD showed that the smaller sized nanoparticles had a more compact amorphous structure with lower coordination number. XRD showed that the amorphous structure was stable up to the maximum pressures achieved. The bulk modulus of the smaller and larger sized nanoparticles was found to be 208 GPa and 178 GPa, respectively. This size-dependent high-pressure behavior was related to compositional differences between the nanoparticles. These results show that Ni 1-x B x metallic glass nanoparticles are highly stable under pressure, which could enable their use as inclusions in metal or ceramic matrix composites.

36 MATERIALS SCIENCE↗

Crystal structure and high-pressure studies of WAl{sub 2}, an aluminide crystallizing with the CrSi{sub 2} structure type

The novel intermetallic compound WAl{sub 2} crystallizes with space group P6{sub 4}22 and lattice parameters a=4.7422(1) A, c=6.6057(2) A. The crystal structure was solved from single-crystal X-ray diffraction data. WAl{sub 2} was found to be the first aluminide that is isotypic with CrSi{sub 2}. A high-pressure powder X-ray diffraction study showed its stability up to at least 31.5(1) GPa. The bulk modulus was calculated by fitting a third-order Birch-Murnaghan equation of state to the pressure-volume data as K{sub 0}=168(11) GPa and its pressure derivative K'=7.7(1.0). Partially covalent bonding between W and Al atoms was indicated by means of the electron localization function (ELF) and explains the anisotropic compression behavior. Quantum chemical calculations identify WAl{sub 2} as a potential high-temperature phase. - Graphical abstract: The novel compound WAl{sub 2} is the first aluminide crystallizing with the CrSi{sub 2} structure type. This compound is stable up to high pressures of at least 31.5 GPa. The chemical bonding analysis by means of the electron localization function (ELF) reveals a partially covalent bonding being responsible for the anisotropic compression behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoelectric and Structural Properties of High-Performance In-based Skutterudites for High-Temperature Energy Recovery

The temperature-dependent thermoelectric and structural properties of n-type filled skutterudites were measured from 300 K to about 650 K. In0.2Co4Sb12, and In0.2Ce0.05Yb0.1Co4Sb12 exhibited ZT values as high as 1.2 at 620 K and In0.2Ce0.15Co4Sb12 showed ZT values of ~1.4 at 675 K. The room temperature Young’s modulus, Poisson’s ratio and coefficient of thermal expansion (CTE at 473 K) of In0.2Ce0.15Co4Sb12, In0.2Co4Sb12, and In0.2Ce0.05Yb0.1Co4Sb12 compositions were found to be lower than that for the unfilled Co4Sb12 skutterudite material. It was discovered that thermal cycling of n-type In0.15Ce0.1Co4Sb12 and In0.2Ce0.17Co4Sb12 materials from 323 K to 673 K (200 cycles) actually increased their power factors by 14-36% at 510 K to 525 K without appreciably changing the Young’s modulus or the Poisson’s ratio. The transport and structural properties characterized in this work are critical to transitioning these materials into operating TE devices and systems.

High-Temperature Energy Recovery↗

AGC-2 Disassembly Report

The Next Generation Nuclear Plant (NGNP) Graphite Research and Development (R&D) Program is currently measuring irradiated material properties for predicting the behavior and operating performance of new nuclear graphite grades available for use within the cores of new very high temperature reactor designs. The Advanced Graphite Creep (AGC) experiment, consisting of six irradiation capsules, will generate irradiated graphite performance data for NGNP reactor operating conditions. The AGC experiment is designed to determine the changes to specific material properties such as thermal diffusivity, thermal expansion, elastic modulus, mechanical strength, irradiation induced dimensional change rate, and irradiation creep for a wide variety of nuclear grade graphite types over a range of high temperature, and moderate doses. A series of six capsules containing graphite test specimens will be used to expose graphite test samples to a dose range from 1 to 7 dpa at three different temperatures (600, 900, and 1200°C) as described in the Graphite Technology Development Plan. Since irradiation induced creep within graphite components is considered critical to determining the operational life of the graphite core, some of the samples will also be exposed to an applied load to determine the creep rate for each graphite type under both temperature and neutron flux. All six AGC capsules in the experiment will be irradiated in the Advanced Test Reactor (ATR). AGC-1 and AGC-2 will be irradiated in the south flux trap and AGC-3–AGC-6 will be irradiated in the east flux trap. The change in flux traps is due to NGNP irradiation priorities requiring the AGC experiment to be moved to accommodate Fuel irradiation experiments. After irradiation, all six AGC capsules will be cooled in the ATR Canal, sized for shipment, and shipped to the Materials and Fuels Complex (MFC) where the capsule will be disassembled in the Hot Fuel Examination Facility (HFEF). During disassembly, the metallic capsule will be machined open and the individual samples removed from the interior graphite body containing the samples. Samples removed from the capsule will be loaded in a shipping drum and shipped to the Idaho National Laboratory (INL) Research Center (IRC) for initial post-irradiation examination (PIE) and storage for any future testing at the newly completed Carbon Characterization Laboratory (CCL). All work was performed under an ASME NQA-1-2008;1a-2009 compliant quality assurance program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of chemistry, interfacial width, and non-isothermal conditions on spatially heterogeneous activated relaxation and elasticity in glass-forming free standing films

Here, we employ the Elastically Collective Nonlinear Langevin Equation (ECNLE) theory of activated relaxation to study several questions in free standing thin films of glass-forming molecular and polymer liquids. The influence of non-universal chemical aspects on dynamical confinement effects is found to be relatively weak, but with the caveat that for the systems examined, the bulk ECNLE polymer theory does not predict widely varying fragilities. Allowing the film model to have a realistic vapor interfacial width significantly enhances the reduction of the film-averaged glass transition temperature, T g , in a manner that depends on whether a dynamic or pseudo-thermodynamic averaging of the spatial mobility gradient is adopted. The nature of film thickness effects on the spatial profiles of the alpha relaxation time and elastic modulus is studied under non-isothermal conditions and contrasted with the corresponding isothermal behavior. Modest differences are found if a film-thickness dependent T g is defined in a dynamical manner. But, adopting a pseudo-thermodynamic measure of T g leads to a qualitatively new form of the alpha relaxation time gradient where highly mobile layers near the film surface coexist with strongly vitrified regions in the film interior. Consequently, the film-averaged shear modulus can increase with decreasing film thickness, despite the T g reduction and presence of a mobile surface layer. Such a behavior stands in qualitative contrast to the predicted mechanical softening under isothermal conditions. Spatial gradients of the elastic modulus are studied as a function of temperature, film thickness, probing frequency, and experimental protocol, and a rich behavior is found.

36 MATERIALS SCIENCE↗

Experimental and theoretical investigation of a mesoporous K x WO 3 material having superior mechanical strength

Mesoporous materials with tailored properties hold great promise for energy harvesting and industrial applications. Here we have synthesized a novel tungsten bronze mesoporous material (K x WO 3 ; x ~ 0.07) having inverse FDU-12 type pore symmetry and a crystalline framework. In situ small angle X-ray scattering (SAXS) measurements of the mesoporous K 0.07 WO 3 show persistence of a highly ordered meso-scale pore structure to high pressure conditions (~18.5 GPa) and a material with remarkable mechanical strength despite having ~35% porosity. Pressure dependent in situ SAXS measurements reveal a bulk modulus κ = 44 ± 4 GPa for the mesoporous K x WO 3 which is comparable to the corresponding value for the bulk monoclinic WO 3 (γ-WO 3 ). Evidence from middle angle (MAXS) and wide angle X-ray scattering (WAXS), high-resolution transmission electron microscopy (HR-TEM) and Raman spectroscopy shows that the presence of potassium leads to the formation of a K-bearing orthorhombic tungsten bronze (OTB) phase within a monoclinic WO 3 host structure. Our ab initio molecular dynamics calculations show that the formation of the OTB phase provides superior strength to the mesoporous K 0.07 WO 3 .

36 MATERIALS SCIENCE↗

Cross-linked poly(methyl vinyl ether-co-maleic acid)/poly(ethylene glycol)/nanocellulosics foams via directional freezing

Aligned micro- and nanoporous materials have gained tremendous interest since they demonstrate great potential in organic electronics, absorbents, biomedicine and tissue engineering. Herein, cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) cross-linked with poly(methyl vinyl ether-co-maleic acid) (PMVEMA) and poly(ethylene glycol) (PEG) foams were prepared by both the directional and un-directional freezing techniques. Aligned three-dimensional porous structures were indicated for the directional frozen foams after lyophilization via scanning electron microscope (SEM). As a result, these highly organized structures exhibited enhanced mechanical performance properties. Particularly, for the 25% CNF foams, the compression modulus increased 60% compared with the un-directional frozen samples. These nanocellulosics-based foams could absorb up to 10-fold water of their initial weight with excellent water stability when immersed in water for more than 48 h. Overall, this study describes a novel process combining cross-linking and directional freezing which successfully fabricates naturally derived foams with anisotropic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PRISMS-Plasticity: An open-source crystal plasticity finite element software

An open-source parallel 3-D crystal plasticity finite element (CPFE) software package PRISMS-Plasticity is presented here as a part of PRISMS integrated framework. A highly efficient rate-independent crystal plasticity algorithm is implemented along with developing its algorithmic tangent modulus. Additionally, a twin activation mechanism is incorporated into the framework based on an integration point sensitive scheme. The integration of the software as a part of the PRISMS framework is demonstrated. To do so, the integration of the PRISMS-Plasticity software with experimental characterization techniques such as electron backscatter diffraction (EBSD) and synchrotron X-ray diffraction using available open source software packages of DREAM.3D and Neper is elaborated. The integration of the PRISMS-Plasticity software with the information repository of Materials Commons is also presented. The parallel performance of the software is characterized which demonstrates that it scales well for large problems running on hundreds of processors. Various examples of polycrystalline metals with face-centered cubic (FCC), body-centered cubic (BCC), and hexagonal close-packed (HCP) crystals structures are presented to show the capability of the software to efficiently solve crystal plasticity boundary value problems, in addition to integration with preprocessing and postprocessing tools. PRISMS-Plasticity is an important activity within the broader PRISMS Center and future enhancements to PRISMS-Plasticity are planned and will be described.

36 MATERIALS SCIENCE↗

Behavior of silver molybdate at high-pressure

Behavior of cubic spinel phase of Ag{sub 2}MoO{sub 4} is investigated at high pressure using X-ray diffraction and Raman spectroscopy. The P-V data are fitted to a third order Birch-Murnaghan equation of state using a value of B{sub 0}=113 GPa and B Prime {sub 0}=4. The compound is also found to exhibit a phase transition around 5 GPa to a tetragonal structure and the two phases are found to coexist over a range of pressures. Raman spectra exhibit dramatic changes across the phase transition. Increase of X-ray background scattering and broadening of the Raman peaks associated with MoO{sub 4} tetrahedral ions in the high pressure phase suggest evolution of positional disorder. However, no evidence of pressure-induced amorphization was found up to 47 GPa. - Graphical abstract: Evolution of the integrated intensity of all the diffraction peaks between 12 and 18 degree 2{theta} as a function of pressure. The rapid decrease of the intensity suggests evolution of positional disorder in the high-pressure tetragonal phase. Highlights: Black-Right-Pointing-Pointer First in-situ X-ray diffraction and Raman study of cubic silver molybdate at high pressure. Black-Right-Pointing-Pointer Commencement of a structural transition to a tetragonal phase is found at 2.3 GPa. Black-Right-Pointing-Pointer The high-pressure phase is found to have positional disorder. Black-Right-Pointing-Pointer A bulk modulus of 113 GPa is obtained from the equation of state.

36 MATERIALS SCIENCE↗

Structural, magnetic and impedance spectroscopy analysis of (0.7)CoFe2O4+(0.3)BaTiO3 magnetoelectric composite

Highlights: • Successfully synthesized (0.7)CoFe{sub 2}O{sub 4}+(0.3)BaTiO{sub 3} composite by ball-milling method. • Structural properties confirmed the presence of both constituent phases. • Dielectric properties showed high value of permittivity and diminished dielectric loss at higher frequency. • Electric response of the constituent phases explained the observed relaxation processes. • Small polaron hopping mechanism governed the conduction mechanism. - Abstract: Magnetoelectric composite of particular composition (0.7)CoFe{sub 2}O{sub 4}+(0.3)BaTiO{sub 3} was synthesized by ball-milling method. X-ray diffraction pattern confirmed the presence of cubic spinel phase for CoFe{sub 2}O{sub 4} and the coexistence of tetragonal phase along with a small fraction of hexagonal phase for BaTiO{sub 3} in the prepared composite. The dielectric permittivity increased with increasing temperature (298–373 K); however, it showed relatively high magnitude of permittivity (∼1100) and diminished dielectric loss (∼0.045) at higher frequency. Complex impedance and modulus plots exhibited responses of different electro-active regions which are explained on the basis of coexistence of resistive and comparatively conductive phases in the prepared composite. Small polaronic hopping model was employed to explain the n-type carrier’s mobility as a possible conduction mechanism; whereas the activation energies calculated from the conduction and relaxation processes were found to be comparable. These results indicate that electric/dielectric properties and relaxation phenomenon are associated to the same origin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Equation of State of Copper Studied by High P-T Synchrotron X-ray Diffraction

The unit-cell volume of copper (Cu) has been measured by synchrotron x-ray at pressures and temperatures of up to 8.1 GPa and 1100 K. From pressure-volume-temperature (P-V-T) measurements, thermoelastic parameters of Cu were derived based on a modified high-T Birch-Murnaghan equation of state and a thermal pressure approach. The ambient bulk modulus derived from this work is comparable to previously reported value, whereas all other thermoelastic parameters of Cu have never been determined before. These results extend our knowledge of the fundamental thermophysical properties on Cu.

36 MATERIALS SCIENCE↗

Microplasticity of Amorphous and Crystallized Fe{sub 78}P{sub 20}Si{sub 2} Alloy

In order to determine the mechanism of plastic deformation, the hardness and local plasticity of amorphous Fe{sub 78}P{sub 20}Si{sub 2} alloy are compared at different stages of its crystallization activated by thermal treatment at 300–750°C or short-term photon treatment with a radiation dose coming to the sample of 10–60 J/cm{sup 2}. The phase composition and structure were investigated by X-ray diffractometry and high-resolution transmission electron microscopy. With the same sequence of structural changes, the crystallization rate under photon treatment is more than two orders of magnitude higher than that under thermal treatment, which indicates the effect of a high rate of input of the process activation energy. The nonmonotonic dependence of the hardness, elastic modulus, and the proportion of plastic strain in the indentation work is found, depending on the annealing temperature or radiation dose received by the sample, as a result of structural changes in the alloy. The local plasticity of the initial alloy and fully crystallized alloy are close in magnitude. Based on the features of the crystal structure of the Fe{sub 3}P phase (the impossibility of the dislocation mechanism of plastic deformation) and assuming that the structural unit (tetrahedral Fe{sub 3}P cluster) of the crystallized and amorphous alloy is identical, a conclusion was formulated about the cluster mechanism of plastic deformation of the amorphous alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation behavior of high-entropy alloys for advanced reactors. Final report

In the first task, we have demonstrated the radiation damage and the recrystallization behaviors in multicomponent alloys through molecular-dynamics simulations. It is found that by alloying with atoms of different sizes, the atomic-level strain increases, and the propensity of the radiation-induced crystalline to amorphous transition increases as the defects cluster in the cascade body. Recrystallization of the radiation induced supercooled or glass regions show that by tuning the composition and the equilibrium temperature, the multicomponent alloys can be healed. The crystalline-amorphous-crystalline transitions predict the potential high radiation resistance in multicomponent alloys. In the second task, three types of high-entropy alloys (HEAs) were fabricated from AlCoCrFeNi and AlCuCrFeNi quinary alloys. Hardness and reduced contact modulus were measured using nanoindentation tests. Heavy ion irradiation were performed using 10 MeV gold and 5 MeV nickel to study radiation effects. Al 0.5 CrCuFeNi 2 shows phase separation upon the presence of copper. Both hardness and contact modulus exhibit the same trend as increasing the applied load, and it indicates that excessive free volume may alter the growth rate of the plastic zone. The as-cast Al 0.1 CoCrFeNi specimen undergone the hot isostatic pressing (HIP) process and steady cooling rate which mitigate the quenching effect. The swelling behavior was characterized by the atomic force microscopy (AFM), and the swelling rate is approximately 0.02% dpa. Selected area diffraction (SAD) patters show irradiation-induced amorphization throughout the ion projected range. Within the peak damage region, an amorpous ring is observed, and a mixture of amorphous/ crystalline structure at deeper depth is found. The Al 0.3 CoCrFeNi HEAs shows good radiation resistance up to 60 peak dpa. No voids or dislocations are observed. The crystal structures remain face-centered-cubic (FCC) before and after 5 MeV Ni irradiation. Higher dpa might be required to study defects formation mechanisms. In the third task, all the constituent binary and ternary systems of the Al-Co-Cr-Fe-Ni system were thermodynamically modeled within the whole composition range. Comparisons between the calculated phase diagrams and literature data are in good agreement. The multi-component thermodynamic database of the Al-Co-Cr-Fe-Ni system was then obtained via extrapolation. The current Al-Co-Cr-Fe-Ni thermodynamic database enables us to carry out the calculations of phase diagrams, which can be used as useful guidelines to identify the Al-Co-Cr-Fe-Ni HEAs with desirable microstructures. In the fourth task, we discuss how as-cast and homogenized phases can be identified, what phases are usually found in the as-cast and homogenized conditions, and what the thermodynamics and kinetics of phase transformations are in the AlCoCrFeNi HEA. The microstructure and phase composition were studied in as-cast and homogenized conditions. It showed the dendritrical structure in the as-cast condition consisting primarily of a nano-lamellar mixture of A2 [disorder body-centered-cubic (BCC)] and B2 (ordered BCC) phases, in addition to a very small amount of A1 [disorder face-centered-cubic (FCC)] phases. The homogenization heat treatment resulted in an increase in the volume fraction of the A1 phase and formation of a Sigma phase. Tensile properties in as-cast and homogenized conditions are reported at 700 °C. Thermodynamic modeling of non-equilibrium and equilibrium phase diagrams for the AlCoCrFeNi HEA gave good agreement with the experimental observations of the phase contents. The reasons for the improvement of ductility after the heat treatment are discussed.

36 MATERIALS SCIENCE↗

Room temperature shear properties of the strain isolator pad for the shuttle thermal protection system

Tests were conducted at room temperature to determine the shear properties of the strain isolator pad (SIP) material used in the thermal protection system of the space shuttle. Tests were conducted on both the .23 cm and .41 cm thick SIP material in the virgin state and after fifty fully reversed shear cycles. The shear stress displacement relationships are highly nonlinear, exhibit large hysteresis effects, are dependent on material orientation, and have a large low modulus region near the zero stress level where small changes in stress can result in large displacements. The values at the higher stress levels generally increase with normal and shear force load conditioning. Normal forces applied during the shear tests reduces the low modulus region for the material. Shear test techniques which restrict the normal movement of the material give erroneous stress displacement results. However, small normal forces do not significantly effect the shear modulus for a given shear stress. Poisson's ratio values for the material are within the range of values for many common materials. The values are not constant but vary as a function of the stress level and the previous stress history of the material. Ultimate shear strengths of the .23 cm thick SIP are significantly higher than those obtained for the .41 cm thick SIP.

Sawyer, J. W.↗

Development and Application of Tools to Characterize the Oxidative Degradation of AP/HTPB/Al Propellants in a Propellant Reliability Study

The oxidative thermal aging of a crosslinked hydroxyl-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) polyurethane rubber was studied at temperatures between 25 C and 125 C. Changes in tensile elongation, mechanical hardening, polymer network properties, density, O2 permeation, and molecular chain dynamics were investigated as a function of age. The techniques used include solvent swelling, detailed modulus profiling, and NMR relaxation measurements. The Arrhenius methodology, which normally assumes a linear extrapolation of high temperature aging data, is critically evaluated by using extensive data superposition and highly sensitive oxygen consumption measurements. Significant curvature in the Arrhenius diagram of these oxidation rates is observed to be similar to previous results found for other rubber materials that have been evaluated by this technique. Preliminary gel/network properties suggest that crosslinking is the dominant process at higher temperatures. The effect on the oxidation rate of the binder when other constituents found in propellants are present, such as ammonium perchlorate, plasticizer and aluminum powder, is presented.

Celina, Mathew↗

Effect of Mesophase Order on the Dynamics of Side Group Liquid Crystalline Polymers

Rheology and X-ray scattering were employed to probe the viscoelastic properties and structural transitions of model cyano-biphenyl-based side-group liquid-crystalline polymers (SGLCPs) with molecular weights ranging from 91 to 1900 kg/mol. Temperature-dependent rheological data show a rapid change in dynamics over a small temperature range. Small-angle X-ray scattering reveals these changes to be associated with an isotropic to smectic transition with an appreciable biphasic region. The presence of a biphasic region is attributed to inhomogeneity in chain structure resulting from incomplete attachment of mesogens to every monomeric unit in the SGLCP polymer. While isotropic and smectic phase data may be separately time-temperature shifted to create master curves for the individual phases, we argue against attempts to achieve superposition between the two phases in the high-frequency regime, since smectic ordering may not simply slow the dynamics but also increase the modulus of the sample. Molecular weight has a strong influence on rheology in the isotropic phase, where an entanglement plateau emerges; however, the smectic-phase rheology is dominated by the layer structure and is fairly insensitive to molecular weight.

36 MATERIALS SCIENCE↗

Variable loop gain using excessive regeneration for a delayed wide-area control system

Disclosed are methods and systems for adjusting a High Voltage Direct Current (HVDC) compensator output signal to an HVDC system to reduce control loop modulus due to excessive time delay of sensor measurements. Two different time windows, a Short-Time Variance Window (STVW) and an Extended-Time Variance Window (ETVW) may be examined for detection of increased energy. To detect increased energy the HVDC compensator output signal may be passed through a bandpass filter, then variances for the STVW and ETVW may be generated to produce corresponding test statistics. The STVW and ETVW test statistics may be compared to hypothesis test thresholds and have binary logic based on the hypothesis test comparisons used to generate a gain. The gain may then be multiplied times the original HVDC feedback compensator output such that the adjusted HVDC feedback compensator output reduces the control loop modulus when applied to the HVDC system.

Roberson, Dakota↗

Application of materials informatics to vapor-grown carbon nanofiber/vinyl ester nanocomposites through self-organizing maps and clustering techniques

Data mining and knowledge discovery techniques were employed herein to acquire new information on the viscoelastic, flexural, compressive, and tensile properties of vapor-grown carbon nanofiber (VGCNF)/vinyl ester (VE) nanocomposites. Formulation and processing factors (curing environment, presence or absence of dispersing agent, mixing method, VGCNF weight fraction, VGCNF type, high-shear mixing time, and sonication time) and testing temperature were utilized as inputs and the true ultimate strength, true yield strength, engineering elastic modulus, engineering ultimate strength, flexural modulus, flexural strength, storage modulus, loss modulus, and tan delta were selected as outputs. The data mining and knowledge discovery algorithms used in this study include self-organizing maps (SOMs) and clustering techniques. SOMs demonstrated that temperature and tan delta had the most significant effects on the output responses followed by the VGCNF high-shear mixing time, and sonication time. SOMs were also used to produce optimal responses using certain combination(s) of inputs. Fuzzy C-means algorithm (FCM) was also applied to discover patterns in the nanocomposite behavior subsequent to a principal component analysis (PCA), which is a dimensionality reduction technique. Utilizing these techniques, the nanocomposite specimens were separated into different clusters based on the testing temperature (30 °C and 120 °C being the most dominant responses), tan delta, high-shear mixing time, and sonication time. Furthermore, the VGCNF/VE specimens were separated into a cluster based on their viscoelastic responses (storage and loss moduli) at the same temperature. The FCM results indicate that, while all nanocomposite properties in the new framework are essential, the viscoelastic responses of the VGCNF/VE specimens are the most significant. Here this work highlights the utility of data mining and knowledge discovery techniques in the context of materials informatics for the discovery of patterns and trends in the material behavior that are not immediately known.

36 MATERIALS SCIENCE↗