Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Developing a Thermodynamic Model for the Interactions between Water and Cu in the Zeolite SSZ-13

The Cu-exchanged zeolite SSZ-13 is an efficient catalyst in the selective catalytic reduction of nitrous oxides in the presence of ammonia, and understanding the nature of the active sites under realistic conditions is important in rationalizing its activity. Especially the interactions between Cu and water have drawn significant amounts of attention in recent years. In this work we develop a thermodynamic model for the water coordination of Cu based on static calculations and present occupational probabilities and phase diagrams for different Al distributions at different temperatures and water pressures. We find that only at high temperatures and low pressures is the bare Cu cation the most stable species and that the cation is solvated at lower temperatures and higher pressures. In the following we compare our results to experimental and theoretical work in this field and find good agreement. This work shows that it is possible to construct an accurate thermodynamic model for water interactions with Cu in zeolites and it will be interesting to see how a similar methodology can be applied to elucidate different problems in the future.

Göltl, Florian↗

The piston-flow interaction as a model for the deflagration-to-detonation transition

The piston-flow interaction induced by a piston pushing hydraulically resisted gas through a long tube is discussed. It is shown that the hydraulic resistance causes a significant precompression and preheating of the gas adjacent to the piston's edge. In the case of an explosive premixture this development may lead to a localized autoignition triggering detonation. It is suggested that the problem may serve as a guide for understanding the deflagration-to-detonation transition in tubes, with the piston modeling the impact of the advancing flame. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward a self-consistent model of the interaction between an ultra-intense, normally incident laser pulse with an overdense plasma

Following a recent work by Sanz et al. [Phys. Rev. E 85, 046411 (2012)], we elaborate upon a one-dimensional model describing the interaction between an ultra-intense, normally incident laser pulse and an overdense plasma. The analytical solutions of the reflected laser field, the electrostatic field, and the plasma surface oscillation are obtained within the cold-fluid approximation. The high-order harmonic spectrum is calculated from the exact solution of the plasma surface oscillations. In agreement with particle-in-cell simulations, two regimes of harmonic generation are predicted: for moderately relativistic laser intensities, or high plasma densities, the harmonic spectrum is determined by the discontinuity in the derivative of the reflected field when the electron plasma boundary oscillates across the fixed ion boundary. For higher intensities, the electron plasma boundary is confined inside the ion region and oscillates at relativistic velocities, giving rise to a train of reflected attosecond pulses. In both cases, the harmonic spectrum obeys an asymptotic ω{sup −4} scaling. The acceleration of electrons and the related laser absorption efficiency are computed by a test particle method. The model self-consistently reproduces the transition between the “anomalous skin effect” and the “J × B” heating predicted by particle-in-cell simulations. Analytical estimates of the different scalings are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effective single-band models for strongly interacting fermions in an optical lattice

To test effective Hamiltonians for strongly interacting fermions in an optical lattice, we numerically find the energy spectrum for two fermions interacting across a Feshbach resonance in a double-well potential. From the spectrum, we determine the range of detunings for which the system can be described by an effective lattice model, and how the model parameters are related to the experimental parameters. We find that for a range of strong interactions the system is well described by an effective t-J model, and the effective superexchange term, J, can be smoothly tuned through zero on either side of unitarity. Right at and around unitarity, an effective one-band general Hubbard model is appropriate, with a finite and small onsite energy, due to a lattice-induced anharmonic coupling between atoms at the scattering threshold and a weakly bound Feshbach molecule in an excited center-of-mass state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A multilayer multiconfiguration time-dependent Hartree simulation of the reaction-coordinate spin-boson model employing an interaction picture

The multilayer multiconfiguration time-dependent Hartree method is applied in an interaction picture to simulate dynamics of the spin-boson model in the reaction-coordinate representation. The use of the interaction picture allows a more effective description of correlation effects, especially when the coupling strength between the reaction coordinate and the bath is very strong. Examples show that in most physical regimes the efficiency is improved significantly, in some cases up to several orders of magnitude. This opens up new avenues for studying quantum dynamical problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A DGTD method for the numerical modeling of the interaction of light with nanometer scale metallic structures taking into account non-local dispersion effects

The interaction of light with metallic nanostructures is increasingly attracting interest because of numerous potential applications. Sub-wavelength metallic structures, when illuminated with a frequency close to the plasma frequency of the metal, present resonances that cause extreme local field enhancements. Exploiting the latter in applications of interest requires a detailed knowledge about the occurring fields which can actually not be obtained analytically. For the latter mentioned reason, numerical tools are thus an absolute necessity. The insight they provide is very often the only way to get a deep enough understanding of the very rich physics at play. For the numerical modeling of light-structure interaction on the nanoscale, the choice of an appropriate material model is a crucial point. Approaches that are adopted in a first instance are based on local (i.e. with no interaction between electrons) dispersive models, e.g. Drude or Drude–Lorentz models. From the mathematical point of view, when a time-domain modeling is considered, these models lead to an additional system of ordinary differential equations coupled to Maxwell's equations. However, recent experiments have shown that the repulsive interaction between electrons inside the metal makes the response of metals intrinsically non-local and that this effect cannot generally be overlooked. Technological achievements have enabled the consideration of metallic structures in a regime where such non-localities have a significant influence on the structures' optical response. This leads to an additional, in general non-linear, system of partial differential equations which is, when coupled to Maxwell's equations, significantly more difficult to treat. Nevertheless, dealing with a linearized non-local dispersion model already opens the route to numerous practical applications of plasmonics. In this work, we present a Discontinuous Galerkin Time-Domain (DGTD) method able to solve the system of Maxwell's equations coupled to a linearized non-local dispersion model relevant to plasmonics. While the method is presented in the general 3D case, numerical results are given for 2D simulation settings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluating the functionality and streamflow impacts of explicitly modelling forest-snow interactions and canopy gaps in a distributed hydrologic model

Many plot-scale observational studies found that snow cover dynamics in forest gaps are distinctly different from open and continuously forested areas, and canopy gaps have the potential to increase snow retention and alter the snow regime. However, our knowledge on forest-snow interactions in discontinuous forests with canopy gaps and their implications for forest and water management is far more limited. We address this knowledge gap through a major enhancement of a widely used distributed hydrologic model, DHSVM. We developed a canopy gap component as a unique vegetation type that is characterized on the subgrid scale, with physics-based representation of processes that allow independent evolution of snowpack in forest gaps. We validated the enhanced DHSVM for three experimental sites in close proximity consisting of a completely open site, a densely forested site, and a canopy gap site. Despite the scale mismatch between point measurements and grid-scale simulations, the modeled snow water equivalent (SWE) agreed reasonably well with the continuous observations collected during one full ablation season at all sites. Evaluation of snowpack energetics suggested that snow ablation at three sites was controlled primarily by net radiation that critically depends on the canopy cover and structure. While the rate of snowmelt remained relatively constant in the forest during the ablation season, the gap demonstrated marked temporal variability in ablation rate as a result of complex interplay between canopy structure of the adjacent forest and the angle of solar incidence. The comparison of this enhanced version to the original DHSVM highlighted the importance of explicitly accounting for forest impacts on the gap snowpack energy balance. Between the two versions, the greatest difference in snow ablation rates was found in smaller gaps. The enhanced model tends to predict notably later melt for small to medium canopy gaps (the ratio of gap radius to canopy height r/h = 1.3), and snow melt rates exhibit great sensitivity to changing gap size in medium-size gaps (0.5 = r/h = 1.3).

Forest-Snow Dynamics, Canopy Gap, Snow Hydrology, ↗

Nonstandard neutrino interactions from a triplet seesaw model

We investigate nonstandard neutrino interactions (NSIs) in the triplet seesaw model featuring nontrivial correlations between NSI parameters and neutrino masses and mixing parameters. We show that sizable NSIs can be generated as a consequence of a nearly degenerate neutrino mass spectrum. Thus, these NSIs could lead to quite significant signals of lepton flavor violating decays such as {mu}{sup -}{yields}e{sup -}{nu}{sub e}{nu}{sub {mu}} and {mu}{sup +}{yields}e{sup +}{nu}{sub e}{nu}{sub {mu}} at a future neutrino factory, effects adding to the uncertainty in determination of the Earth matter density profile, as well as characteristic patterns of the doubly charged Higgs decays observable at the Large Hadron Collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solvable four-state Landau-Zener model of two interacting qubits with path interference

In this paper, I identify a nontrivial four-state Landau-Zener model for which transition probabilities between any pair of diabatic states can be determined analytically and exactly. The model describes an experimentally accessible system of two interacting qubits, such as a localized state in a Dirac material with both valley and spin degrees of freedom or a singly charged quantum dot (QD) molecule with spin orbit coupling. Application of the linearly time-dependent magnetic field induces a sequence of quantum level crossings with possibility of interference of different trajectories in a semiclassical picture. I argue that this system satisfies the criteria of integrability in the multistate Landau-Zener theory, which allows one to derive explicit exact analytical expressions for the transition probability matrix. Finally, I also argue that this model is likely a special case of a larger class of solvable systems, and present a six-state generalization as an example.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deciphering the details of RNA aminoglycoside interactions: from atomistic models to biotechnological applications

A detailed study was done of the neomycin-B RNA aptamer for determining its selectivity and binding ability to both neomycin– and kanamycin-class aminoglycosides. A novel method to increase drug concentrations in cells for more efficiently killing is described. To test the method, a bacterial model system was adopted and several small RNA molecules interacting with aminoglycosides were cloned downstream of T7 RNA polymerase promoter in an expression vector. Then, the growth analysis of E. coli expressing aptamers was observed for 12-hour period. Our analysis indicated that aptamers helped to increase the intracellular concentration of aminoglycosides thereby increasing their efficacy.

59 BASIC BIOLOGICAL SCIENCES↗

Report on activities and findings under DOE grant “Collaborative research. An Interactive Multi-Model for Consensus on Climate Change”

The project takes a hierarchical approach. The supermodeling scheme was first studied exhaustively with simple systems of ordinary differential equations. Results were described in detail in the previous report. The principal findings were that 1) for highly non-linear systems, such as Lorenz-63, including systems which describe phenomena on very different (atmosphere/ocean) times scales, supermodeling is far superior to any form of output-averaging; 2) negative coefficients can be used to advantage in situations where all models err in the same way, but to different degrees; 3) an interesting variant of supermodeling, “weighted supermodeling”, is the limiting case where inter-model nudging coefficients in the originally conceived “connected supermodel” become infinite, but with fixed ratios, corresponding to a direct combination of the tendencies that appear in corresponding equations for the alternative models; 4) noise is useful for avoiding local optima in training the inter-model coefficients in the supermodel. The supermodeling scheme was then investigated with simple quasigeostrophic (QG) models. As described in the previous report, it was found that QG models on a sphere can be coupled most efficaciously by working in a basis which captures the most variance, rather than the most instability, a somewhat unexpected result that still deserves scrutiny in a broader context. Further studies (since the last report) with QG channel models addressed the central question of when supermodeling is superior to output averaging in situations where nonlinearites are less extreme than with the ODEs initially studied. It was found that for realistic variations in a parameter in the QG model, output averaging is sufficient to capture all but the most subtle quantitative and qualitative behavior. Supermodeling helps when qualitative differences between the models result from unrealistically large parameter differences, or when very detailed spatial structure of the modes of variability are of interest. Therefore, the scheme may still be useful in the case of full climate models with qualitatively different parametrization schemes. A supermodel was constructed from the intermediate-complexity SPEEDO model, a primitive equation model with ocean and land. Versions defined by different parameter choices, in a realistic range, were connected and the coefficients trained. Some improvement was found as compared to output averaging. The learning algorithm used thus far gives sub-optimal, but still useful results when the CO 2 level and other parameters are varied. Spatial structure remains to be studied. The first use of supermodeling with full climate models has been with variants of the ECHAM model that use different convection schemes. As yet the models are only connected at the ocean-atmosphere interface, where weighted combinations of fluxes from the two atmospheres are passed to a common ocean, and the weights adapted during a training period. The supermodel was surprisingly successful at avoiding unrealistic features such as the double-ITCZ (Intertropical Convergence Zone), a problem that arises in both of the two models run separately. The supermodels constructed thus far have not identified dynamical regime shifts in future climate. Thus the planned connection with the work of Tsonis on the relationship between regime shifts and synchronization/de-synchronization among the major climate modes (see U. Wisconsin report) has not yet been made. However the network analysis of the climate system, in observations and models, that was done in conjunction with that study, shows that models differ strongly from one another and from observations in regard to the dynamical structure described by correlation networks [Steinhaeuser and Tsonis 2013], providing a further justification for supermodeling. Toward a general software framework for supermodeling, three versions of CAM (the Community Atmosphere Model) at NCAR were configured for inter-model nudging using the DART (Data Assimilation Research Testbed) capability to stop and re-start models in synchrony. It was clearly established that the inter-model nudging adds almost no computational burden to the runs, but there appears to be a problem with the re-initialization software that is still being debugged. Publications: Several papers were published on the basic idea of the interactive multi-model (supermodel) including demonstrations with low-order ODEs. The last of these, a semi-philosophical review paper on the relevance of synchronization generally, encountered considerable resistance but was finally published in Entropy [Duane 2015]. A paper on the ECHAM/COSMOS supermodel, containing the most promising results so far [Shen et al. 2015] is presently under review.

58 GEOSCIENCES↗

Material Interactions in Severe Accidents – Benchmarking the MELCOR V2.2 Eutectics Model for a BWR-3 Mark-I Station Blackout: Part II – Uncertainty Analysis

Single case comparisons between severe accident simulations can provide detailed insights into severe accident model behavior, however, they cannot offer insights into model uncertainty, sensitivity to uncertain parameters, or underlying model biases.Here in this analysis, the single case benchmark comparison of the MELCOR material interaction models for a station blackout (SBO) scenario of a boiling water reactor (BWR) using representative Fukushima Daiichi Unit 1 boundary conditions is expanded to include an uncertainty analysis. As part of this uncertainty analysis, 1200 simulations are performed for each material interaction model (2400 total), with random sampling of 14 uncertain MELCOR input parameters. Input parameters are selected for their impact on models representing core degradation processes. These include candling, fuel rod failure, debris quenching and dryout. The analysis performed here is not a traditional “best-estimate” uncertainty analysis that uses best-estimate parameters or identifies best-estimate figure of merit distributions. Instead, it is an exploratory uncertainty analysis that identifies and interrogates underlying model form biases of the two material interaction models (eutectics and interactive materials models). Uniform distributions are applied to all uncertain parameters to ensure coverage of the model parameter uncertainty space. Key findings from this study include underlying model form biases exhibited by material interaction models, and notable differences in accident progression outcomes between the material interaction models. This uncertainty study extends and confirms the conclusions from the first part of this study, which compared the impact of material interaction modeling on simulation of a short-term station blackout scenario with representative Fukushima Daiichi Unit I boundary conditions. In particular, this study confirms that the eutectics model generally exhibits accelerated degradation and failure of fuel components, the core plate, and the lower head. The eutectics model also has a tendency to exhibit a greater degree of core degradation, greater debris mass formation, and larger debris mass ejection. Finally, the eutectics model exhibits higher maximum temperatures for fuel, cladding, particulate debris, oxidic molten pool, and metallic molten pool components than the interactive materials model; interactive materials model simulations exhibit a soft “limitation” on maximum temperatures that is related to the temperature at which material relocation occurs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Exactly solvable nonseparable and nondiagonalizable two-dimensional model with quadratic complex interaction

We study a quantum model with nonisotropic two-dimensional oscillator potential but with additional quadratic interaction x{sub 1}x{sub 2} with imaginary coupling constant. It is shown that for a specific connection between coupling constant and oscillator frequencies, the model is not amenable to a conventional separation of variables. The property of shape invariance allows to find analytically all eigenfunctions and the spectrum is found to be equidistant. It is shown that the Hamiltonian is nondiagonalizable, and the resolution of the identity must include also the corresponding associated functions. These functions are constructed explicitly, and their properties are investigated. The problem of R-separation of variables in two-dimensional systems is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Peres lattices in nuclear structure and beyond

A method by Peres is used to draw spectra of the geometric collective model and the interacting boson model as lattices in the plane of energy versus an arbitrary observable average (or dispersion). Ordered (disordered) lattices are signatures of regular (chaotic) dynamics on both quantum and classical levels. The method enables one to disclose important features of the system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Schematic model for induced fission in a configuration-interaction approach

We model fission at barrier-top energies in a simplified model space that permits comparison of different components of the residual nucleon-nucleon interaction. The model space is built on particle-hole excitations of reference configurations. These are Slater determinants of uniformly spaced orbitals characterized only by their quantum numbers and orbital energies. The residual interaction in the Hamiltonian includes the diabatic interaction connecting similar orbitals at different deformations, the pairing interaction between like nucleons, and a schematic off-diagonal neutron-proton interaction. We find that the fission reaction probability is sensitive to the off-diagonal neutron-proton interaction much more than to the pairing and the diabatic interactions. In particular, the transmission coefficients become insensitive to the strength of the pairing interaction when the neutron-proton interaction is large. Here, we also find that the branching ratio is insensitive to the final-state scission dynamics, as is assumed in the well-known Bohr-Wheeler theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exactly Solvable Model for Strongly Interacting Electrons in a Magnetic Field

States of strongly interacting particles are of fundamental interest in physics and can produce exotic emergent phenomena and topological structures. We consider here two-dimensional electrons in a magnetic field, and, departing from the standard practice of restricting to the lowest LL, introduce a model short-range interaction that is infinitely strong compared to the cyclotron energy. Here, we demonstrate that this model lends itself to an exact solution for the ground as well as excited states at arbitrary filling factors v<1/2p and produces a fractional quantum Hall effect at fractions of the form v=n/(2pn+1), where n and p are integers. The fractional quantum Hall states of our model share many topological properties with the corresponding Coulomb ground states in the lowest Landau level, such as the edge physics and the fractional charge of the excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CIGS Technology Advancement via Fundamental Modeling of Defect/Impurity Interactions (Final Technical Report)

The primary goals of the proposed work were to provide modeling tools (and the associated insight which comes along with model development) for design and optimization of CuIn x Ga 1-x Se 2 (CIGS) and CdSeTe (CST) solar cell manufacturing processes and to establish the foundation for comprehensive end-to-end predictive modeling tools to enable optimization of thin film photovoltaic technology for performance, cost, yield, and reliability. The initial focus of efforts within this project was to develop coupled process/optical/device models for CIGS PV technology and to work with Siva Power to apply that TCAD (technology computer-aided design) system to improve the efficiency and reduce manufacturing costs for CIGS solar cells. Our approach to that end was to generate an extensive database of DFT calculations and to use those calculations via statistical thermodynamics methods and Monte Carlo simulation to develop and characterize models for the behavior of native defects as well as intentional and unintentional impurities, including the redistribution of the primary components of CIGS films. Increased effort went toward coupling those models for defect behavior and composition evolution to the performance of multicrystalline CIGS solar cells via prediction of doping level and recombination lifetime as function of manufacturing process. In the second budget period, the project pivoted to developing a similar system for the CdSeTe system, focused especially on understanding the role of Se/Te alloy concentration. Execution of the project resulted in the successful development of TCAD systems for both CIGS and CdSeTe thin film PV within the Synopsys Sentaurus framework by utilizing the Alagator interface. In the first budget period of the project, we developed quantitative models for the major components of CIGS PV and implemented them within a framework that couples process, optical, and device simulation. From the insights we have gained, we identified novel opportunities for enhancing CIGS solar cell performance and have laid the groundwork to further optimize the layer structure, composition profile, and thermal cycles for substantially improved efficiency and lower manufacturing costs. For the CIGS system, process changes to achieve greater than 1% absolute enhancement in efficiency were identified, but testing of those approaches was stymied by lack of a domestic CIGS manufacturing partner after the closure of Siva Power as well as Miasole. For CdSeTe, a fully capable TCAD system only became ready to apply near the end of the project period, so substantial opportunities remain to apply those models to enhance the leading thin film PV technology.

14 SOLAR ENERGY↗

Enhancing the accuracy of density functional tight binding models through ChIMES many-body interaction potentials

Semi-empirical quantum models such as Density Functional Tight Binding (DFTB) are attractive methods for obtaining quantum simulation data at longer time and length scales than possible with standard approaches. However, application of these models can require lengthy effort due to the lack of a systematic approach for their development. In this work, we discuss the use of the Chebyshev Interaction Model for Efficient Simulation (ChIMES) to create rapidly parameterized DFTB models, which exhibit strong transferability due to the inclusion of many-body interactions that might otherwise be inaccurate. We apply our modeling approach to silicon polymorphs and review previous work on titanium hydride. We also review the creation of a general purpose DFTB/ChIMES model for organic molecules and compounds that approaches hybrid functional and coupled cluster accuracy with two orders of magnitude fewer parameters than similar neural network approaches. In all cases, DFTB/ChIMES yields similar accuracy to the underlying quantum method with orders of magnitude improvement in computational cost. In conclusion, our developments provide a way to create computationally efficient and highly accurate simulations over varying extreme thermodynamic conditions, where physical and chemical properties can be difficult to interrogate directly, and there is historically a significant reliance on theoretical approaches for interpretation and validation of experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗