Search NASA⌕ Search

SEARCH · Search NASA

Results for “layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Observations of the magnetospheric boundary layers

Results on magnetospheric boundary layers are reviewed, emphasizing their dynamical importance based on hot plasma observations, energetic particle signatures, heavy ion contributions and the effects of wave-particle interactions. Satellite plasma observations show that 1% to 2% of the oncoming solar wind plasma enters the magnetosphere and is initially transported within the magnetospheric boundary layer. Some of this boundary layer plasma is entrained within the Earth's magnetotail where it can be accelerated. Tests are needed to determine the relative contributions of the primary acceleration processes whose effects are especially evident in the plasma sheet boundary layer.

Eastman, T. E.↗
NASA NTRS1985

On the Improvement of Satellite Temperature Retrievals by Means of Boundary Layer Models

The improvement of the accuracy of the satellite temperature retrievals close to the Earth's surface by boundary layer models was determined. The simplest type of boundary layer models that only consider time changes in the mean boundary layer quantities such as equivalent potential temperature and specific humidity, but neglect the details of the turbulent structure in the interior of the layer were used. They can be run with relatively few externally specified parameters: surface wind speed and divergence rate. Model verifications studies show that under certain conditions the mean atmospheric structure can be simulated very well.

Boers, R.↗
NASA NTRS1983

Numerical simulations of plasma double layers

The results of analytical studies of quasi-static electric fields along geomagnetic field lines are discussed. The calculations were targeted at the structure, generation mechanisms and stability parameters. The field consists of two oppositely charged layers, either weakly or strongly charged, with an electric field between. Existence conditions are defined for the double layer field and balancing requirements are explored. Details of the simulation techniques, i.e., particle in cell and Vlasov simulations, for studying the double layer are outlined, noting that both periodic and quasi-periodic simulations are used. Solutions to Poisson's equation for fixed and floating point boundary conditions are generated. Finally, attention is also given to oblique and two-dimensional magnetic double layers.

Goertz, C. K.↗
NASA NTRS1985

Density response of neutral atmospheric layers to gravity wave perturbations

Expressions for the density response of neutral atmospheric layers to propagating waves are derived. The expressions include nonlinear effects and are used to compute the response of the mesospheric sodium layer to low-frequency internal gravity waves. The results are compared with lidar observations of the sodium layer and used to deduce gravity wave parameters. It is shown that because of the large sodium density gradients and the relatively high amplitudes of gravity waves at mesospheric heights the nonlinear components of the layer density response must be considered in interpreting sodium lidar data.

Gardner, C. S.↗
NASA NTRS1984

Transverse ageostrophic circulations associated with elevated mixed layers

The nature of the frontogenetically forced transverse ageostrophic circulations connected with elevated mixed layer structure is investigated as a first step toward diagnosing the complex vertical circulation patterns occurring in the vicinity of elevated mixed layers within a severe storm environment. The Sawyer-Eliassen ageostrophic circulation equation is reviewed and applied to the elevated mixed layer detected in the SESAME IV data set at 2100 GMT of May 9, 1979. The results of the ageostrophic circulation diagnosis are confirmed and refined by considering an analytic specification for the elevated mixed layer structure.

Keyser, D.↗
NASA NTRS1985

Control plate for shock-boundary layer interaction

Paper describes tests and computations for a relatively unique technique to greatly reduce/eliminate the separation region for shock-boundary layer interactions. A number of studies have shown that the usual effects of such interactions include increased local heating and wall pressures, thickening of the boundary layer and a decrease in the momentum of the flow and, for stronger waves, flow separation. This flow situation is particularly prevalent in supersonic and hypersonic inlets where severe performance degradation can occur due to flow separation. High performance engine design generally requires a uniform entering flow field with little stagnation pressure loss. Previous approaches to the problem involved primarily active devices (e.g., suction or blowing); the present paper considers a passive device. The boundary layer separation control technique considered herein involves the placement of an embedded plate in the outer portion of the boundary layer and parallel to the wall. This control plate is situated such that the incident shock impinges upon and reflects from its surface, thus greatly lessening the pressure gradient in the low momentum near wall region.

Goodman, W. L.↗
NASA NTRS1984

Molecular processes in a high temperature shock layer

Models of the shock layer encountered by an Aeroassisted Orbital Transfer Vehicle require as input accurate cross sections and rate constants for the atomic and molecular processes that characterize the shock radiation. From the estimated atomic and molecular densities in the shock layer and the expected residence time of 1 m/s, it can be expected that electron-ion collision processes will be important in the shock model. Electron capture by molecular ions followed by dissociation, e.g., O2(+) + e(-) yields 0 + 0, can be expected to be of major importance since these processes are known to have high rates (e.g., 10 to the -7th power cu/cm/sec) at room temperature. However, there have been no experimental measurements of dissociative recombination (DR) at temperatures ( 12000K) that are expected to characterize the shock layer. Indeed, even at room temperature, it is often difficult to perform experiments that determine the dependence of the translational energy and quantum yields of the product atoms on the electronic and vibrational state of the reactant molecular ions. Presented are ab initio quantum chemical studies of DR for molecular ions that are likely to be important in the atmospheric shock layer.

Guberman, S. L.↗
NASA NTRS1985

Taylor-Goertler instabilities of Tollmien-Schlichting waves and other flows governed by the interactive boundary layer equations

The Taylor-Gortler vortex instability equations are formulated for steady and unsteady interacting boundary layer flows of the type which arise in triple-deck theory. The effective Gortler number is shown to be a function of the all shape in the boundary layer and the possibility of both steady and unsteady Taylor-Gortler modes exists. As an example the steady flow in a symmetrically constricted channel is considered and it is shown that unstable Gortler vortices exist before the boundary layers at the wall develop the Goldstein singularity. As an example of an unsteady spatially varying basic state the instability of high frequency large amplitude Tollmien-Schlichting waves in a curved channel were considered. It is shown that they are unstable in the first Stokes layer stage of the hierarchy of nonlinear states. The Tollmien-Schlichting waves are shown to be unstable in the presence of both convex and concave curvature.

Hall, P.↗
NASA NTRS1986

Development of perturbations in the boundary layer

The transition of laminar flows into turbulent flows in a boundary layer is discussed. The individual aspects of the transition process, observed under controllable model conditions are examined. The aspect of this problem, namely the development or excitation of the natural oscillations in the boundary layer, the so-called Tollmin-Schlichting waves is covered. Three types of excitation of these waves are considered: (1) distributed generation throughout the boundary layer; (2) generation in the vicinity of the forward edge of a model, having either a sharp edge or an edge with a large radius or curvature, and (3) generation in a developed boundary layer by means of a focused effect.

Dovgal, A. V.↗
NASA NTRS1986

Tables for correcting airfoil data obtained in the Langley 0.3-meter transonic cryogenic tunnel for sidewall boundary-layer effects

Tables for correcting airfoil data taken in the Langley 0.3-meter Transonic Cryogenic Tunnel for the presence of sidewall boundary layer are presented. The corrected Mach number and the correction factor are minutely altered by a 20 percent change in the boundary layer virtual origin distance. The sidewall boundary layer displacement thicknesses measured for perforated sidewall inserts and without boundary layer removal agree with the values calculated for solid sidewalls.

Jenkins, R. V.↗
NASA NTRS1985

Lidar observations of the nighttime sodium layer at 33 deg N

Measurements of the nighttime atmospheric sodium layer have been performed since 1977, using a dye lidar at Fukuoka (33.4 deg N, 130.2 deg E.). The Kyushu lidar uses a flashlamp pumped dye laser tuned to the sodium D sub 2 line (589.0 nm) as a transmitter. The dye laser used in the Kyushu lidar system has been described elsewhere. Sporadic enhancements of the total column abundance of the layer during the Perseids meteor shower were observed on the nights of August 12 and 13, 1978, 1979, 1981, and 1983. Degrading weather conditions prevented observation on the nights during 1980 and 1983. A contour plot of the sodium layer for the period of 8 hours from 21:00 to 5:00 JST on the night of August 12 to 13 1983, is shown. The predominant feature visible is the increase in the height of peak density from 21:00 to 2:00 JST, and the slight decrease in the height of peak density from 2:00 to 5:00 JST. The average abundance had a maximum of about 7 x 10 to the 13th power/sq m on August 13. A plot is presented of the nightly average abundance for available data. The sodium layer abundance increased on the night of August 12 to 13, 1983, during the peak of the Perseids meteor shower, and the following night, August 13 to 14, almost went back to the monthly mean.

Uchiumi, M.↗
NASA NTRS1986

Feasibility study of optical boundary layer transition detection method

A high sensitivity differential interferometer was developed to locate the region where the boundary layer flow undergoes transition from laminar to turbulent. Two laboratory experimental configurations were used to evaluate the performance of the interferometer: open shear layer, and low speed wind tunnel turbulent spot configuration. In each experiment, small temperature fluctuations were introduced as the signal source. Simultaneous cold wire measurements were compared with the interferometer data. The comparison shows that the interferometer is sensitive to very weak phase variations in the order of 0.001 the laser wavelength. An attempt to detect boundary layer transition over a flat plate at NASA-Langley Unitary Supersonic Wind Tunnel using the interferometer system was performed. The phase variations during boundary layer transition in the supersonic wind tunnel were beyond the minimum signal-to-noise level of the instrument.

Azzazy, M.↗
NASA NTRS1986

Effect of aspect ratio on sidewall boundary-layer influence in two-dimensional airfoil testing

The effect of sidewall boundary layers in airfoil testing in two-dimensional wind tunnels is investigated. The non-linear crossflow velocity variation induced because of the changes in the sidewall boundary-layer thickness is represented by the flow between a wavy wall and a straight wall. Using this flow model, a correction for the sidewall boundary-layer effects is derived in terms of the undisturbed sidewall boundary-layer properties, the test Mach number and the airfoil aspect ratio. Application of the proposed correction to available experimental data showed good correlation for the shock location and pressure distribution on airfoils.

Murthy, A. V.↗
NASA NTRS1985

Magnetic field properties of the distant magnetotail magnetopause and boundary layer

Models incorporating merging between dayside magnetosheath and magnetosphere field lines predict the location of the magnetotail boundary layer and bending of magnetotail field lines in the direction of the IMF. Previous observations supporting these models are reviewed, and a case of dense magnetotail boundary layer plasma and strongly bent field lines observed by ISEE 3 is examined. Observations of boundary layer plasma within a tangential discontinuity magnetopause are discussed. The model to explain this phenomenon requires that interconnected magnetotail and magnetosheath field lines leave the magnetotail via a narrow 'window'. Field lines in the dense boundary layer plasma veer away from the aberrated x axis more than those in the void magnetotail lobes in order to pass through the windows. Magnetosheath plasma must enter the magnetotail lobes through the windows at all downstream distances in order to supply he observed tailward flux of lobe plasma.

Sibeck, D. G.↗
NASA NTRS1985

Resonance cone structure in a warm inhomogeneous bounded plasma with lower-hybrid resonance layers

The paper presents a theoretical study of the problem of the wave fields excited by a gap source at the edge of an inhomogeneous magnetized plasma with a pair of lower-hybrid resonance layers present and bounded by conducting walls. The approach used is that of a solution as a sum of multiply reflected extraordinary mode and ion-thermal resonance cones as an alternative to the guided-wave mode approach. A diagrammatic scheme for writing the solution is given which can be used to determine in great detail the structure and properties of the resonance cones and the way they transform across the back-to-back hybrid layers. Evanescent resonance cones are shown to exist in the high-density region between the hybrid resonance layers and to tunnel through to the other side, maintaining this general structure if the layer is relatively thin.

Grabbe, C. L.↗
NASA NTRS1986

Laboratory observations of ion cyclotron waves associated with a double layer in an inhomogeneous magnetic field

Observations of coherent electrostatic ion cyclotron (EIC) waves associated with a strong, magnetized double layer are presented. The double layers are produced in a weakly ionized argon plasma by applying a positive potential to an electrode plate located in the diverging magnetic field region of a cylindrical plasma column. Ionization within the electrode sheath is essential to the formation of these double layers. The resulting V-shaped potential structures have extended parallel, oblique and perpendicular (to B) electric field components. The frequency of the ion cyclotron instability is dependent upon the magnetic field strength at the position of the parallel potential structure. The properties of EIC waves in the presence of the double layer are discussed in relation to the possible excitation mechanisms (field-aligned currents, ion and electron beams, and perpendicular E fields).

Alport, M. J.↗
NASA NTRS1985

Entrainment region phenomena for a large plane shear layer

The subatmospheric test section of the present free shear layer facility allows the entrainment air to be introduced with a negligible disturbance level. The very low frequency oscillations, which are prominently observed in the entrainment stream and which are present throughout the shear layer, are attributed to an inherent instability in the transition from a boundary layer to a free shear layer state. The basic features of the disturbance field are documented herein.

Ali, S. K.↗
NASA NTRS1985

Simulation of turbulent mixing layers

A hybrid numerical scheme, combined with a scalar convection scheme, is used to compute turbulent mixing layers. The hybrid scheme is used to solve the vorticity equation by dividing the domain into two regions, applying a Lagrangian method in one region and an Eulerian method in the other. The scalar convection scheme is used to track an interface which separates a dyed fluid from a dye-free fluid, thereby distinguishing the fluid that starts on the high speed side from the fluid that starts on the low speed side. A two-dimensional mixing layer has been simulated using this new method; the roll up of a vortex sheet into structures that interact and pair is observed. The growth of the momentum thickness and the development of the mean turbulence statistics are found to be consistent with experimental observations. Forcing of the layer at moderate and low frequencies shows a dramatic effect on the growth of the momentum thickness and the entrainment ratio. Low frequency forcing enhances the growth of the layer; moderate frequency forcing inhibits the growth.

Mansour, N. N.↗