Search NASA⌕ Search

SEARCH · Search NASA

Results for “maximize”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Evaluation of the Danish Aerospace Corporation Portable Pulmonary Function System

A research project designed to investigate changes in maximal oxygen consumption (VO2max) during and following long duration flight on the International Space Station (ISS) has recently been completed. The device used to measure VO2 on board ISS, the Portable Pulmonary Function System (PPFS) manufactured by the Danish Aerospace Corporation (DAC), is based on previous-generation devices manufactured by DAC, but the PPFS has not been validated for analyzing metabolic gases or measuring cardiac output (Qc). The purpose of the present evaluation is to compare PPFS metabolic gas analysis measurements to measurements obtained using a clinically-validated system (ParvoMedics TrueOne(c) 2400 system; Parvo). In addition, Qc data collected with the PPFS were compared to Qc measurements from echocardiography. METHODS: Ten subjects completed three cycle exercise tests to maximal exertion. The first test was conducted to determine each subject's VO2max and set the work rates for the second and third (comparison) tests. The protocol for the two comparison tests consisted of three 5-minute stages designed to elicit 25%, 50%, and 75% VO2max (based upon results from the initial test), followed by 1-minute stages of increasing work rate (25 watt/minute) until the subject reached maximal effort. During one of the two comparison tests, metabolic gases and Qc were assessed with the PPFS; metabolic gases and Qc were assessed with the Parvo and by echocardiography, respectively, during the other test. The order of the comparison tests was counterbalanced. VO2max and maximal work rate during the comparison tests were compared using t tests. Mixed-effects regression modeling was used to analyze submaximal data. RESULTS: All of the data were within normal physiological ranges. The PPFS-measured values for VO2max were 6% lower than values obtained with the Parvo (PPFS: 3.11 +/- 0.75 L/min; Parvo: 3.32 +/- 0.87 L/min; mean +/- standard deviation; P = 0.02); this difference is probably due to flow restriction imposed by the PPFS Qc accessories. Submaximal VO2 values were slightly lower when measured with the PPFS, although differences were not physiologically relevant. The PPFS-measured values of submaximal carbon dioxide production (VCO2) were lower than the data obtained from Parvo, which could be attributed to lower fractions of expired carbon dioxide measured by the PPFS. The PPFS Qc values tended to be lower than echocardiography-derived values. CONCLUSIONS: The results of the present study indicate a need to further examine the PPFS and to better quantify its reproducibility; however, none of the findings of the current evaluation indicate that the PPFS needs to be replaced or modified.

Portable Pulmonary Function System (PPFS)↗

Vortex Radiometry: Fundamental Concepts

Vortex radiometers (VRs) enable communication systems to maximize data throughput by determining when to employ fade mitigation most efficiently. With this information, communication systems can optimize mitigation strategies before actual fades occur. Doing so maximizes the time over which the link is available, and therefore maximizes data throughput. This paper presents the fundamental concepts of vortex radiometry, including the creation of annular beam patterns through the use of orbital angular momentum (OAM). These concepts are simulated on a 100 Mbps (Megabits per second) GEO (Geosynchrous Earth Orbit)-to-ground Ka-Band communication link. During the simulation a noise source traverses across the link, and without VR capabilities the link is disrupted. However, when the situation is repeated with VR capabilities enabled, the antenna is able to increase receiver gain and maintain the link. VRs are uniquely suited to provide communication systems with the ability to optimize receiver parameters and maximize data throughput, making them critical to enabling next generation communication networks.

Orbital Angular Momentum↗

A sampling-based optimization approach to handling environmental uncertainty for a planetary lander

Planning for unknown environments presents a number of technical challenges. The planner must ensure robustness to unknown phenomena and manage unpredictable variation in execution, all while operating in a capacity that maximizes its objective. Productivity in the face of these challenges re-quires an integrated approach to planning and execution that is capable of accomplishing goals, reacting to variation, and maximizing overall utility. We examine this problem in the context of a Europa Lander concept mission. We model the problem as a hierarchical task network, framing it as a utility maximization problem constrained on a depletable energy resource. We propose an uncertainty–sensitive deterministic planning framework that utilizes periodic replanning to better handle model uncertainty and variable execution. We demonstrate the efficacy of our framework through simulations of a Europa Lander concept mission in which our algorithm out-performs several baseline approaches in both utility maximization and robustness

Zilberstein, Shlomo↗

Design and Testing of the BionicWingSat in a Zero-g Flight Campaign - A 2U-CubeSat with Deployable, Biologically-Inspired Wings

In this paper, recent developments in the design, manufacturing, and testing of a novel deployable structure with several potential applications in space will be described. Through a cooperative effort of the German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA), a biologically inspired structurally integrated membrane featuring distributed functional elements has been developed and tested in a 2U CubeSat called BionicWingSat. Such a membrane structure could be useful for several applications in which a relatively flat area is desirable such as solar sails, drag sails, or solar shades. For SmallSats and CubeSats, the design proposed also has the desirable property of being self-deploying without the need for powered deployment mechanisms. Building on previous work inspired by the wings of earwigs, the research presented in this paper includes structural design of self-deploying hinges, a survey of various advanced additive layer manufacturing (ALM) methods for making hinges, mechanical characterization of the hinges, and finite element analysis (FEA) of the hinges. In this work, the conflicting goals of maximizing deployed structural stiffness, maximizing deployed area, maximizing stowed packaging efficiency, and maximizing resistance to creep when stowed must be considered. The resulting design concept is a gossamer structure that cannot support its own weight in gravity. For this reason, a focus in this paper is on a parabolic flight test campaign in which 24 fully integrated wings on two BionicWingSats were tested in a microgravity environment. From this test campaign, several lessons were learned regarding the wing design and procedures for carrying out microgravity tests of this manner.

CubeSat↗

Design and Testing of the BionicWingSat in a Zero-g Flight Campaign - A 2U-CubeSat with Deployable, Biologically-Inspired Wings

In this paper, recent developments in the design, manufacturing, and testing of a novel deployable structure with several potential applications in space will be described. Through a cooperative effort of the German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA), a biologically inspired structurally integrated membrane featuring distributed functional elements has been developed and tested in a 2U CubeSat called BionicWingSat. Such a membrane structure could be useful for several applications in which a relatively flat area is desirable such as solar sails, drag sails, or solar shades. For SmallSats and CubeSats, the design proposed also has the desirable property of being self-deploying without the need for powered deployment mechanisms. Building on previous work inspired by the wings of earwigs, the research presented in this paper includes structural design of self-deploying hinges, a survey of various advanced additive layer manufacturing (ALM) methods for making hinges, mechanical characterization of the hinges, and finite element analysis (FEA) of the hinges. In this work, the conflicting goals of maximizing deployed structural stiffness, maximizing deployed area, maximizing stowed packaging efficiency, and maximizing resistance to creep when stowed must be considered. The resulting design concept is a gossamer structure that cannot support its own weight in gravity. For this reason, a focus in this paper is on a parabolic flight test campaign in which 24 fully integrated wings on two BionicWingSats were tested in a microgravity environment. From this test campaign, several lessons were learned regarding the wing design and procedures for carrying out microgravity tests of this manner.

CubeSat↗

A Sampling-Based Optimization Approach to Handling Environmental Uncertainty for a Planetary Lander

Planning for unknown environments presents a number of technical challenges. The planner must ensure robustness to unknown phenomena and manage unpredictable variation in execution, all while operating in a capacity that maximizes its objective. Productivity in the face of these challenges re-quires an integrated approach to planning and execution that is capable of accomplishing goals, reacting to variation, and maximizing overall utility. We examine this problem in the context of a Europa Lander concept mission. We model the problem as a hierarchical task network, framing it as a utility maximization problem constrained on a depletable energy resource. We propose an uncertainty–sensitive deterministic planning framework that utilizes periodic replanning to better handle model uncertainty and variable execution. We demonstrate the efficacy of our framework through simulations of a Europa Lander concept mission in which our algorithm out-performs several baseline approaches in both utility maximization and robustness

Chien, Steve↗

Real space mapping of oxygen vacancy diffusion and electrochemical transformations by hysteretic current reversal curve measurements

An excitation voltage biases an ionic conducting material sample over a nanoscale grid. The bias sweeps a modulated voltage with increasing maximal amplitudes. A current response is measured at grid locations. Current response reversal curves are mapped over maximal amplitudes of the bias cycles. Reversal curves are averaged over the grid for each bias cycle and mapped over maximal bias amplitudes for each bias cycle. Average reversal curve areas are mapped over maximal amplitudes of the bias cycles. Thresholds are determined for onset and ending of electrochemical activity. A predetermined number of bias sweeps may vary in frequency where each sweep has a constant number of cycles and reversal response curves may indicate ionic diffusion kinetics.

42 ENGINEERING↗

A Hybrid Gradient Method to Designing Bayesian Experiments for Implicit Models

Bayesian experimental design (BED) aims at designing an experiment to maximize the information gathering from the collected data. The optimal design is usually achieved by maximizing the mutual information (MI) between the data and the model parameters. When the analytical expression of the MI is unavailable, e.g.,having implicit models with intractable data distributions, a neural network-based lower bound of the MI was recently proposed and a gradient ascent method was used to maximize the lower bound [1]. However, the approach in [1] requires a pathwise sampling path to compute the gradient of the MI lower bound with respect to the design variables, and such a pathwise sampling path is usually inaccessible for implicit models. In this work, we propose a hybrid gradient approach that leverages recent advances in variational MI estimator and evolution strategies (ES)combined with black-box stochastic gradient ascent (SGA) to maximize the MI lower bound. This allows the design process to be achieved through a unified scalable procedure for implicit models without sampling path gradients. Several experiments demonstrate that our approach significantly improves the scalability of BED for implicit models in high-dimensional design space.

Zhang, Jiaxin↗

Variable resolution Poisson-disk sampling for meshing discrete fracture networks

Here, we present the near-Maximal Algorithm for Poisson-disk Sampling (nMAPS) to generate point distributions for variable resolution Delaunay triangular and tetrahedral meshes in two and three-dimensions, respectively. nMAPS consists of two principal stages. In the first stage, an initial point distribution is produced using a cell-based rejection algorithm. In the second stage, holes in the sample are detected using an efficient background grid and filled in to obtain a near-maximal covering. Extensive testing shows that nMAPS generates a variable resolution mesh in linear run time with the number of accepted points. We demonstrate nMAPS capabilities by meshing three-dimensional discrete fracture networks (DFN) and the surrounding volume. The discretized boundaries of the fractures, which are represented as planar polygons, are used as the seed of 2D-nMAPS to produce a conforming Delaunay triangulation. The combined mesh of the DFN is used as the seed for 3D-nMAPS, which produces conforming Delaunay tetrahedra surrounding the network. Under a set of conditions that naturally arise in maximal Poisson-disk samples and are satisfied by nMAPS, the two-dimensional Delaunay triangulations are guaranteed to only have well-behaved triangular faces. While nMAPS does not provide triangulation quality bounds in more than two dimensions, we found that low-quality tetrahedra in 3D are infrequent, can be readily detected and removed, and a high-quality balanced mesh is produced.

97 MATHEMATICS AND COMPUTING↗

Accelerating the Mining of Influential Nodes in Complex Networks through Community Detection

Computing the set of influential nodes with a given size to ensure maximal spread of influence on a complex network is a challenging problem impacting multiple applications. A rigorous approach to influence maximization involves utilization of optimization routines that comes with a high computational cost. In this work, we propose to exploit the existence of communities in complex networks to accelerate the mining of influential seeds. We provide intuitive reasoning to explain why our approach should be able to provide speedups without significantly degrading the extent of the spread of influence when compared to the case of influence maximization without using the community information. Additionally, we have parallelized the complete workflow by leveraging an existing parallel implementation of the Louvain community detection algorithm. We then conduct a series of experiments on a dataset with three representative graphs to first verify our implementation and then demonstrate the speedups. Our method achieves speedups ranging from 3x - 28x for graphs with small number of communities while nearly matching or even exceeding the activation performance on the entire graph. Complexity analysis reveals that dramatic speedups are possible for larger graphs that contain a correspondingly larger number of communities. In addition to the speedups obtained from the utilization of the community structure, scalability results show up to 6.3x speedup on 20 cores relative to the baseline run on 2 cores. Finally, current limitations of the approach are outlined along with the planned next steps.

community detection↗

Comparison of threshold selection methods for microarray gene co-expression matrices

Background: Network and clustering analyses of microarray co-expression correlation data often require application of a threshold to discard small correlations, thus reducing computational demands and decreasing the number of uninformative correlations. This study investigated threshold selection in the context of combinatorial network analysis of transcriptome data. Findings: Six conceptually diverse methods - based on number of maximal cliques, correlation of control spots with expressed genes, top 1% of correlations, spectral graph clustering, Bonferroni correction of p-values, and statistical power - were used to estimate a correlation threshold for three time-series microarray datasets. The validity of thresholds was tested by comparison to thresholds derived from Gene Ontology information. Stability and reliability of the best methods were evaluated with block bootstrapping. Two threshold methods, number of maximal cliques and spectral graph, used information in the correlation matrix structure and performed well in terms of stability. Comparison to Gene Ontology found thresholds from number of maximal cliques extracted from a co-expression matrix were the most biologically valid. Approaches to improve both methods were suggested. Conclusion: Threshold selection approaches based on network structure of gene relationships gave thresholds with greater relevance to curated biological relationships than approaches based on statistical pair-wise relationships.

59 BASIC BIOLOGICAL SCIENCES↗

Machine Learning for Memory Reduction in the Implicit Monte Carlo Simulations of Thermal Radiative Transfer [Slides]

Project Goal: Use parametric Machine Learning methods in order to reduce memory requirements at checkpointing & restarting in the IMC simulations of Thermal Radiative Transfer using: Expectation Maximization and Weighted Gaussian Mixture Model-based approach for `particle-data compression', introduced in Plasma Physics to model Maxwellian particle distributions by Luis Chacon and Guangye Chen; Expectation Maximization with Weighted Hyper-Erlang Model in order to compress isotropic IMC particle data in the frequency domain; and Expectation Maximization and von Mises-Fisher Mixture Model for compression of anisotropic IMC particle data in the angular domain (work-in-progress).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Life-cycle analysis of integrated biorefineries with co-production of biofuels and bio-based chemicals: co-product handling methods and implications: Co-product handling methods and implications of life-cycle analysis of biofuel and bio-chemical co-producing biorefineries

New integrated biorefinery (IBR) concepts are being investigated to co-produce hydrocarbon fuels and high-value bio-based chemicals to improve the economic viability of IBRs, to enhance biomass resource utilization efficiencies, and to maximize potential greenhouse gas (GHG) emission reductions. Unlike fuel-only biorefineries, IBRs may co-produce a significant amount of bio-based chemicals, whose emission implications for specific biorefinery products and the biorefinery as a whole need to be evaluated. We discuss this in principle and apply three sets of co-product handling methods to conduct life-cycle analysis (LCA) of modeled IBRs with co-production of two bioproduct examples - succinic acid and adipic acid - alongside a renewable diesel blendstock fuel product. The LCA results for the specific co-product handling methods that were examined shed light on potential artifacts of product-specific LCA with selected co-product methods. We discuss the advantages and limitations of each method and conclude that (i) a system-level or 'black-box' LCA allocation method is too simplistic to reflect appropriately the GHG burdens of distinctly different processing trains for fuels and chemicals in the IBR context, and (ii) the displacement method is the only co-product handling method that accounts fully for the emission effects of both the fuel product and the non-fuel bio-based co-products in the IBRs within the context of the existing fuel-focused GHG regulatory framework. Alternatively, biorefinery system-level LCA combines benefits of individual products to offer a complete picture. This system-level LCA approach offers a holistic LCA without somewhat arbitrary decisions either on an allocation basis or by the selection of an evaluation metric based on specific products.

09 BIOMASS FUELS↗

Variance in offspring sex ratio and maternal allocation in a highly invasive mammal

Abstract Skewed sex ratios at birth are widely reported in wild populations, however, the extent to which parents are able to modulate the sex ratio of offspring to maximize their own fitness remains unclear. This is particularly true for highly polytocous species as maximizing fitness may include trade‐offs between sex ratio and the size and number of offspring in litters. In such cases, it may be adaptive for mothers to adjust both the number of offspring per litter and offspring sex to maximize individual fitness. Investigating maternal sex allocation in wild pigs ( Sus scrofa ) under stochastic environmental conditions, we predicted that under favorable conditions, high‐quality mothers (larger and older) would produce male‐biased litters and invest more in producing larger litters with more males. We also predicted sex ratio would vary relative to litter size, with a male‐bias among smaller litters. We found evidence that increasing wild boar ancestry, maternal age and condition, and resource availability may weakly contribute to male‐biased sex ratio, however, unknown factors not measured in this study are assumed to be more influential. High‐quality mothers allocated more resources to litter production, but this relationship was driven by adjustment of litter size, not sex ratio. There was no relationship between sex ratio and litter size. Collectively, our results emphasized that adjustment of litter size appeared to be the primary reproductive characteristic manipulated in wild pigs to increase fitness rather than adjustment of offspring sex ratio.

59 BASIC BIOLOGICAL SCIENCES↗

Radial storage efficiency for CO 2 injection: Quantifying effectiveness of local flow control methods

Basin-scale geologic carbon sequestration will require hundreds of injection wells, each of which has costs related to property rights and regulatory requirements that correlate with the areal size of the carbon dioxide plume. These surface-footprint-related issues motivate maximizing storage efficiency radially away from each well. Radial storage efficiency (RSE) is defined here as the ratio of the volumetrically weighted carbon dioxide free-phase saturation within a given radius away from the injection well to the available pore space within that same radius. Maximizing RSE effectively minimizes the radial extent of the CO 2 plume. Optimizing RSE around individual wells requires local flow control injection strategies that can increase the uniformity of the filling of pore space around the well over the entire length of the perforated injection interval despite differences in local formation transmissivity. The goal of uniform filling of the storage reservoir starting from the well outward is to maximize carbon dioxide sweep and trapping locally outward from the well in all of the layers of the storage region before buoyancy forces predominate and drive carbon dioxide upward where it will spread laterally under lower-permeability layers. Example simulations of carbon dioxide injection into a layered storage system with and without local flow control are presented to show the advantage of uniformly filling all layers and how RSE can be used to quantify storage efficiency for the two different injection approaches. Published 2021. This article is a U.S. Government work and is in the public domain in the USA.

03 NATURAL GAS↗

Putting the soil health principles to the test in Iowa

One of the most popular soil conservation campaigns is based on the USDA Natural Resource Conservation Service's Soil Health Principles (NRCS-SHPs). The NRCS-SHP program identifies four principles—maximize presence of living roots, minimize disturbance, maximize soil cover, and maximize biodiversity—with the underlying assumption that the more principles one follows, the greater improvements in soil health. Despite the popularity of the NRCS-SHPs, this underlying assumption has not been rigorously tested. To do so, we used nine long-term experiments all located in central Iowa, but with varying degree of NRCS-SHP adoption, to determine if greater adoption increases three slow-changing (maximum water holding capacity, bulk density [BD], and soil organic carbon) and three dynamic (microbial biomass carbon [MBC], potentially mineralizable carbon [PMC], and permanganate oxidizable carbon [POXC]) soil health indicators. We regressed these indicators with a soil health principle score that can scale soil management based on adoption of the NRCS-SHPs. Of the slow-changing soil properties, increased adoption of NRCS-SHPs only decreased soil BD (R2 = 0.22, p = 0.024). On the other hand, increased adoption of NRCS-SHPs strongly predicted increases in both MBC and PMC and across two sampling dates (R2 > 0.23, p < 0.015); POXC, however, did not increase with greater adoption. The consistent increases in MBC and PMC with greater adoption of NRCS-SHPs supports their usefulness as sensitive indicators of positive soil health change. Our study provides scientific evidence to support the NRCS-SHPs concept, improving its usefulness as an extension campaign, and stands as a step toward evidence-based soil conservation.

60 APPLIED LIFE SCIENCES↗

Model-Based Clustering of Regression Time Series Data via APECM -- An AECM Algorithm Sung to an Even Faster Beat

We propose a model-based approach for clustering time series regression data in an unsupervised machine learning framework to identify groups under the assumption that each mixture component follows a Gaussian autoregressive regression model of order p. Given the number of groups, the traditional maximum likelihood approach of estimating the parameters using the expectation-maximization (EM) algorithm can be employed, although it is computationally demanding. The somewhat fast tune to the EM folk song provided by the Alternating Expectation Conditional Maximization (AECM) algorithm can alleviate the problem to some extent. In this article, we develop an alternative partial expectation conditional maximization algorithm (APECM) that uses an additional data augmentation storage step to efficiently implement AECM for finite mixture models. Results on our simulation experiments show improved performance in both fewer numbers of iterations and computation time. The methodology is applied to the problem of clustering mutual funds data on the basis of their average annual per cent returns and in the presence of economic indicators.

99 GENERAL AND MISCELLANEOUS↗

Perfecting one-loop BCJ numerators in SYM and supergravity

We take a major step towards computing D-dimensional one-loop amplitudes in general gauge theories, compatible with the principles of unitarity and the color-kinematics duality. For n-point amplitudes with either supersymmetry multiplets or generic non-supersymmetric matter in the loop, simple all-multiplicity expressions are obtained for the maximal cuts of kinematic numerators of n-gon diagrams. At n = 6, 7 points with maximal supersymmetry, we extend the cubic-diagram numerators to encode all contact terms, and thus solve the long-standing problem of simultaneously realizing the following properties: color-kinematics duality, manifest locality, optimal power counting of loop momenta, quadratic rather than linearized Feynman propagators, compatibility with double copy as well as all graph symmetries. Color-kinematics dual representations with similar properties are presented in the half-maximally supersymmetric case at n = 4, 5 points. The resulting gauge-theory integrands and their supergravity counterparts obtained from the double copy are checked to reproduce the expected ultraviolet divergences.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗