Search NASA⌕ Search

SEARCH · Search NASA

Results for “modelling studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

A Parameterized Neutrino Emission Model to Study Mass Ejection in Failed Core-collapse Supernovae

Some massive stars end their lives as failed core-collapse supernovae (CCSNe) and become black holes (BHs). Although in this class of phenomena the stalled supernova (SN) shock is not revived, the outer stellar envelope can still be partially ejected. This occurs because the hydrodynamic equilibrium of the star is disrupted by the gravitational mass loss of the protoneutron star (PNS) due to neutrino emission. We develop a simple parameterized model that emulates PNS evolution and its neutrino emission and use it to simulate failed CCSNe in spherical symmetry for a wide range of progenitor stars. Our model allows us to study mass ejection of failed CCSNe where the PNS collapses into a BH within ~100 ms and up to ~10 6 s. We perform failed CCSNe simulations for 262 different pre-SN progenitors and determine how the energy and mass of the ejecta depend on progenitor properties and the equation of state (EOS) of dense matter. In the case of a future failed CCSN observation, the trends obtained in our simulations can be used to place constraints on the pre-SN progenitor characteristics, the EOS, and on PNS properties at BH formation time.

79 ASTRONOMY AND ASTROPHYSICS↗

Fourier transform infrared studies of model polar stratospheric cloud surfaces - Growth and evaporation of ice and nitric acid/ice

Fourier-transform infrared surface studies are used to probe the microphysical properties of nitric acid trihydrate (NAT) and ice films representative of type I and II polar stratospheric clouds (PSC). Experiments indicate that, on initial exposure to 1.8 microtorr of HNO3, a layer of ice is quantitatively converted to NAT. However, conversion of ice to NAT does not proceed indefinitely, but rather the system reaches saturation. For longer exposures or higher HNO3 pressures, NAM becomes the dominant nitric acid containing species on the surface. Evaporation studies were performed to test the feasibility of a recent denitrification mechanism. The results indicate that ice coated with 0.20 micron of NAT evaporates at a temperature of about 4 C higher than uncoated ice.

Tolbert, Margaret A.↗

X-ray nanofocusing by kinoform lenses: A comparative study using different modeling approaches

We conduct a comparative study on various kinoform lenses (KLs) for x-ray nanofocusing by using the geometrical theory, the dynamical diffraction theory, and the beam propagation method. This study shows that the geometrical theory becomes invalid to describe the performance of a KL for nanofocusing. The strong edge diffraction effect from individual lens element, which distorts the desired wave field, leads to a reduction in the effective numerical aperture and imposes a limit on how small a focus a KL can achieve. Because this effect is associated with a finite thickness of a lens, larger lens thickness depicts a stronger distortion. We find that a short KL where all lens elements are folded back to a single plane shows an illumination preference: if the illuminating geometry is in favor of the Bragg diffraction for a focusing order, its performance is enhanced and vice versa. We also find that a short KL usually outperforms its long version where all lens elements do not lie in a single plane because the short one suffers less the wave field distortion due to the edge diffraction. Simulation results suggest that for a long KL, an adaptive lens design is needed to correct the wave field distortion in order to achieve a better performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Reconfigurable In Vitro Model for Studying the Blood–Brain Barrier

Much of what is currently known about the role of the blood–brain barrier (BBB) in regulating the passage of chemicals from the blood stream to the central nervous system (CNS) comes from animal in vivo models (requiring extrapolation to human relevance) and 2D static in vitro systems, which fail to capture the rich cell–cell and cell–matrix interactions of the dynamic 3D in vivo tissue microenvironment. In this work we have developed a BBB platform that allows for a high degree of customization in cellular composition, cellular orientation, and physiologically-relevant fluid dynamics. The system characterized and presented in this study reproduces key characteristics of a BBB model (e.g. tight junctions, efflux pumps) allowing for the formation of a selective and functional barrier. We demonstrate that our in vitro BBB is responsive to both biochemical and mechanical cues. This model further allows for culture of a CNS-like space around the BBB. As a result, the design of this platform is a valuable tool for studying BBB function as well as for screening of novel therapeutics.

42 ENGINEERING↗

Nonlinear simplified model to study localization of kinetic Alfvén wave

We have presented the numerical simulation of the coupled equations governing the dynamics of kinetic Alfvén wave (KAW) and ion acoustic wave in the intermediate β plasma, where β is the ratio of thermal pressure to the background magnetic pressure. We have also developed a simplified model for this nonlinear interaction using the results obtained from the simulation to understand the physics of nonlinear evolution of KAW. Localization of magnetic field intensity of KAW has been studied by means of the simplified model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A High-resolution Regional Wave Resource Characterization For The U.S. West Coast

Objectives/Scope: Wave resource characterization is a critical step for wave energy converter deployment in the coastal ocean and relies on long-term, high-resolution wave datasets. This study presents a detailed modeling study of the wave resource along the U.S. West Coast (Washington, Oregon, and California), a coastal region that was identified with high wave energy potential in earlier studies. Methods, Procedures, Process: The wave hindcast covers a 32-year period from 1979 to 2010 and is based on a multi-resolution, unstructured-grid SWAN model framework. Model configuration closely follows and meets the requirements recommended by the International Electrotechnical Commission Technical Specification (IEC TS) for wave energy resource assessment and characterization (Class 2 - feasibility study). The model domain covers the entire U.S. Exclusive Economic Zone (EEZ) in the West Coast and has a spatial resolution varying from ~300 m in the nearshore region (20 km from the shoreline) to ~2500 m within the EEZ and ~5000 m at the open boundary, which extends beyond the EEZ. The model was forced by hourly 2-D wave spectra produced by a two-way nested WaveWatch III model, which covers the global ocean domain and the broader U.S. West Coast region domain with spatial resolutions of 0.5 degree and 10 arc-minutes, respectively. Both wave models are forced by hourly, 0.5-degree wind forcing obtained from NCEP’s Climate Forecast System Reanalysis (CFSR) product. Results, Observations, Conclusions: The standard model output for the SWAN model includes 3-hourly output for the six IEC wave resource parameters (e.g., omnidirectional wave power) at each grid point and hourly 2-D spectra at more than 50 NDBC buoys. Extensive model validation was achieved by comparing the six model-predicted IEC parameters with those derived from field observations at representative NDBC buoys. The error statistics indicated the model’s satisfactory performance. Further analyses were conducted to systematically evaluate the temporal and spatial distributions of wave energy potential and wave climate along the U.S. West Coast. Results suggest that Washington and Oregon coasts have similar nearshore wave resource, which is significantly higher than resources in Southern California. Strong seasonal variations are also observed, e.g., high wave energy tends to occur in the winter months. In summary, this study produced the first high-resolution, comprehensive dataset on wave energy distribution along the U.S. West Coast. Novel/Additive Information: The results are being used by the National Renewable Energy Laboratory to update the MHK Atlas, which was originally derived from NOAA’s 4-arc-minute WaveWatch III model output. In addition, the monthly averaged wave energy climatology dataset can be readily shared to support a variety of research and application efforts within the EEZ of the U.S. West Coast.

Wang, Taiping↗

A Computer Model to Study the Response of Energetic Materials to a Range of Dynamic Loads

Over the past decade we developed a model to enable computer simulation of the mechanical and subsequent energetic response of explosives and propellants to mechanical insults such as impacts, perforations, drops, and falls. The model is embedded in computer simulation programs that solve the non-linear, large deformation equations of compressible solid and fluid flow in space and time. It is implemented as a user-defined model, which returns the updated stress tensor and composition that result from the simulation supplied strain tensor change. Although it is multi-phase, in that gas and solid species are present, it is single-velocity, in that the gas does not flow through the porous solid. More than 70 time-dependent variables are made available for additional analyses and plotting. The model encompasses a broad range of possible responses: mechanical damage with no energetic response, and a continuous spectrum of degrees of violence including delayed and prompt detonation. This work describes the basic workings of the model.

36 MATERIALS SCIENCE↗

A Parameter Study for Modeling Mg ii h and k Emission during Solar Flares

Solar flares show highly unusual spectra in which the thermodynamic conditions of the solar atmosphere are encoded. Current models are unable to fully reproduce the spectroscopic flare observations, especially the single-peaked spectral profiles of the Mg ii h and k lines. We aim to understand the formation of the chromospheric and optically thick Mg ii h and k lines in flares through radiative transfer calculations. We take a flare atmosphere obtained from a simulation with the radiative hydrodynamic code RADYN as input for a radiative transfer modeling with the RH code. By iteratively changing this model atmosphere and varying thermodynamic parameters such as temperature, electron density, and velocity, we study their effects on the emergent intensity spectra. We reproduce the typical single-peaked Mg ii h and k flare spectral shape and approximate the intensity ratios to the subordinate Mg ii lines by increasing either densities, temperatures, or velocities at the line core formation height range. Additionally, by combining unresolved upflows and downflows up to ∼250 km s{sup −1} within one resolution element, we reproduce the widely broadened line wings. While we cannot unambiguously determine which mechanism dominates in flares, future modeling efforts should investigate unresolved components, additional heat dissipation, larger velocities, and higher densities and combine the analysis of multiple spectral lines.

79 ASTRONOMY AND ASTROPHYSICS↗

A New Atmosphere-Ocean Model for Studying Air-Sea Interactions and Coupled Data Assimilation

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MITgcm) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies.Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (~ 1/8°) configuration of the GEOS atmosphere to a lat-lon-cap-1080 (~ 1/12°) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗

Water Lone Pair Delocalization in Classical and Quantum Descriptions of the Hydration of Model Ions

Understanding the nature of ionic hydration at a fundamental level has eluded scientists despite intense interest for nearly a century. In particular, the microscopic origins of the asymmetry of ion solvation thermodynamics with respect to the sign of the ionic charge remains a mystery. Here, we determine the response of accurate quantum mechanical water models to strong nanoscale solvation forces arising from excluded volumes and ionic electrostatic fields. This is compared to the predictions of two important limiting classes of classical models of water with fixed point changes, differing in their treatment of “lone pair” electrons. Using the quantum water model as our standard of accuracy, we find that a single fixed classical treatment of lone pair electrons cannot accurately describe solvation of both apolar and cationic solutes, emphasizing the need for a more flexible description of local electronic effects in solvation processes. However, we explicitly show that all water models studied respond to weak long-ranged electrostatic perturbations in a manner that follows macroscopic dielectric continuum models, as would be expected. Here, we emphasize the importance of these findings in the context of realistic ion models, using density functional theory and empirical models, and discuss the implications of our results for quantitatively accurate reduced descriptions of solvation in dielectric media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An experimental and theoretical study of adenine adsorption on Au(111)

A model study of adenine adsorption on the Au(111) surface is reported for molecular adlayers prepared by evaporation in vacuum and deposition from saturated aqueous solution. The electronic structure and adsorption geometry of the molecular films were studied experimentally by X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure spectroscopy. Adsorption models are proposed for the adlayers arising from the different preparation methods. Density functional theory calculations were used to examine both parallel and upright adenine adsorption geometries, supply additional information on the bond strength, and identify which atom is involved in bonding to Au(111). In the case of deposition in vacuum, the adenine molecule is bound via van der Waals forces to Au(111) with the molecular plane parallel to the surface, consistent with the published scanning tunneling microscopy data on this system. The most stable parallel adenine configuration was found to have an adsorption energy of ca. -1.1 eV using the optB86b-vdW functional. For adenine deposition from aqueous solution, the adlayer is disordered, with molecules in an upright geometry, and with an adsorption energy of ca. -1.0 eV, coordinated via the imino N3 nitrogen atom. The present study contributes to the substantial literature of model studies of adenine on Au(111), complementing the existing knowledge with information on electronic structure, bonding geometry and adsorption energy of this system.

Acres, Robert G.↗

On the impact of temperatures up to 200°C in clay repositories with bentonite engineer barrier systems: A study with coupled thermal, hydrological, chemical, and mechanical modeling

One of the most important design variables for a geological nuclear waste repository is the temperature limit up to which the engineered barrier system (EBS) and the natural geologic environment can be exposed. Up to now, almost all design concepts that involve bentonite-backfilled emplacement tunnels have chosen a maximum allowable temperature of about 100°C. Such a choice is largely based on the consideration that in clay-based materials illitization and the associated mechanical changes in the bentonite (and perhaps the clay host rock) could affect the barrier attributes of the EBS. However, existing experimental and modeling studies on the occurrence of illitization and related performance impacts are not conclusive, in part because the relevant couplings between the thermal, hydrological, chemical, and mechanical (THMC) processes have not been fully represented in the models. This work presents a fully coupled THMC simulation of a nuclear waste repository in a clay formation with a bentonite-backfilled EBS for 1000 years. Two scenarios were simulated for comparison: a case in which the temperature in the bentonite near the waste canister can reach about 200°C and a case in which the temperature in the bentonite near the waste canister peaks at about 100°C. The model simulations demonstrate some degree of illitization in both the bentonite buffer and the surrounding clay formation. Other chemical alterations include the dissolution of K-feldspar and calcite, and precipitation of quartz, chlorite, and kaolinite. In general, illitization in the bentonite and the clay formation is enhanced at higher temperature. However, the quantity of illitization is affected by many chemical factors and therefore varies a great deal. The most important chemical factors are the concentration of K in the pore water as well as the abundance and dissolution rate of K-feldspar; less important ones are the concentration of sodium and the quartz precipitation rate. In our modeling scenarios, the calculated decrease in smectite volume fraction in bentonite ranges from 1 to 8% of the initial volume fraction of smectite in the 100°C scenario and 1–27% in the 200°C scenario. Chemical changes in the 200°C scenario could also lead to a reduction in swelling stress up to 15–18% whereas those in the 100°C scenario result in about 14–15% reduction in swelling stress for the base case scenario. Model results also show that the 200°C scenario results in a much higher total stress than the 100°C scenario, mostly due to thermal pressurization. While cautions should be taken regarding the model results due to some limitations in the models, the modeling work is illustrative in light of the relative importance of different processes occurring in EBS bentonite and clay formation at higher than 100°C conditions, and could be of greater use when site specific data are available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

AN ESTIMATE OF SPENT NUCLEAR FUEL MECHANICAL LOADS IN THE GENERAL 30 CM PACKAGE DROP SCENARIO

The US Department of Energy Spent Fuel and Waste Science and Technology (SFWST) program is performing research to determine the mechanical loading conditions applied to spent nuclear fuel (SNF) during normal conditions of transport to inform mechanical tests of SNF and close an important knowledge gap related to the practical disposition of SNF in the US. Researchers at Pacific Northwest National Laboratory (PNNL) have completed an extensive finite element study to characterize and estimate the potential mechanical loads on SNF during a hypothetical 30 cm drop of an SNF transportation package. This modeling study is validated with test data collected by the SFWST program during a physical test campaign that included one-third scale package drop tests and full-scale single fuel assembly drop tests. The test campaign was led by Sandia National Laboratories (SNL) and included international collaboration with Equipos Nucleares S.A, S.M.E (ENSA) and Bundesanstalt für Materialforschung und -prüfung (BAM). The key contribution of the modeling study is to go beyond the limitations of the limited number of physical tests to estimate the impact response to variations in impact angle, initial gap conditions, fuel assembly design, burnup and other parameters that affect the mechanical loads. The methodology of this study included a classic parametric study to calculate the impact response of highly detailed fuel assemblies over many combinations of parameters. Models of a 17x17 pressurized water reactor fuel assembly and a generic 10x10 boiling water reactor fuel assembly were both used in this study to cover the major fuel assembly types in the US inventory. Over 2,000 impact responses were calculated. The results of the parametric study were evaluated using traditional methods and basic statistics. The results were also used to construct a damage model using multiple nonlinear regression techniques to predict the mechanical loads over the full range of all input parameters. The damage model was found to work very well for all impact angle cases where the cask came to rest on its side. It was concluded that end drop cases where the cask remained vertical (instead of tipping over onto its side) were not sufficiently characterized by the current set of parametric study cases to include in the damage model, but it was not a priority to fully investigate that range because the highest mechanical loads were observed in the broader range of side impact cases. This modeling work provides sufficient insight into the mechanical loads on SNF during a hypothetical 30 cm package drop that, when considered along with the physical test data collected by the SNL-led team, the SFSWT program can consider the knowledge gap closed.

Klymyshyn, Nicholas A.↗

The internal model: A study of the relative contribution of proprioception and visual information to failure detection in dynamic systems

The development of the internal model as it pertains to the detection of step changes in the order of control dynamics is investigated for two modes of participation: whether the subjects are actively controlling those dynamics or are monitoring an autopilot controlling them. A transfer of training design was used to evaluate the relative contribution of proprioception and visual information to the overall accuracy of the internal model. Sixteen subjects either tracked or monitored the system dynamics as a 2-dimensional pursuit display under single task conditions and concurrently with a sub-critical tracking task at two difficulty levels. Detection performance was faster and more accurate in the manual as opposed to the autopilot mode. The concurrent tracking task produced a decrement in detection performance for all conditions though this was more marked for the manual mode. The development of an internal model in the manual mode transferred positively to the automatic mode producing enhanced detection performance. There was no transfer from the internal model developed in the automatic mode to the manual mode.

Kessel, C.↗

Comment on “Review of experimental studies of secondary ice production” by Korolev and Leisner (2020)

Abstract. This is a comment on the review by Korolev and Leisner (2020, hereafter KL2020). The only two laboratory/field studies ever to measure the breakup in ice–ice collisions for in-cloud conditions were negatively criticised by KL2020, as were our subsequent theoretical and modelling studies informed by both studies. First, hypothetically, even without any further laboratory experiments, such theoretical and modelling studies would continue to be possible, based on classical mechanics and statistical physics. They are not sensitive to the accuracy of lab data for typical situations, partly because the nonlinear explosive growth of ice concentrations continues until some maximum concentration is reached. To a degree, the same final concentration is expected regardless of the fragment number per collision. Second, there is no evidence that both lab/field observational studies characterising fragmentation in ice–ice collisions are either mutually conflicting or erroneous such that they cannot be used to represent this breakup in numerical models, contrary to the review. The fact that the ice spheres of one experiment were hail sized (2 cm) is not a problem if a universal theoretical formulation, such as ours, with fundamental dependencies, is informed by it. Although both lab/field studies involved head-on collisions, rotational kinetic energy for all collisions generally is only a small fraction of the initial collision kinetic energy (CKE) anyway. Although both lab/field experiments involved fixed targets, that is not a problem since the fixing of the target is represented via CKE in any energy-based formulation such as ours. Finally, scaling analysis suggests that the breakup of ice during sublimation can make a significant contribution to ice enhancement in clouds, again contrary to the impression given by the review.

54 ENVIRONMENTAL SCIENCES↗

Quality Guideline for Energy System Studies: Process Modeling Design Parameters

The purpose of this section of the Quality Guidelines is to document the assumptions most commonly used in systems analysis studies and the basis for those assumptions. The large number of assumptions required for a thorough systems analysis make it impractical to document the entire set in each report. This document will serve as a comprehensive reference for these assumptions as well as their justification.

42 ENGINEERING↗

A study of model parameters associated with the urban climate using HCMM data

Infrared and visible data from the Heat Capacity Mapping Mission (HCMM) satellite were used to study the intensity of the urban heat island, commonly defined as the temperature difference between the center of the city and the surrounding suburban and rural regions, as a function of changes in the season and changes in meteorological conditions in order to derive various parameters which may be used in numerical models for urban climate. The analysis was focused on the city of St. Louis; and in situ data from St. Louis was combined with HCMM data in order to derive the various parameters. The HCMM data were mapped onto a Mercator projection map of the city and ground temperatures were established using data corrected for the effects of atmospheric absorption. The corrected and uncorrected HCMM data were compared to determine the magnitude of the error induced by atmospheric effects.

Source record↗

Bonneville Powerhouse 2 Fish Guidance Efficiency Studies: CFD Model of the Forebay

In ongoing work, U.S. Army Corps of Engineers, Portland District (CENWP) is seeking to better understand and improve the conditions within the Bonneville Powerhouse 2 (B2) turbine intakes to improve survival of downstream migrant salmonid smolt. In this study, the existing B2 forebay computational fluid dynamics (CFD) model was modified to include a more detailed representation of all B2 turbine intakes. The modified model was validated to existing field-measured forebay ADCP velocities. The initial CFD model scenarios tested a single project operation and the impact of adding the Behavior Guidance System (BGS) or Corner Collector. These structures had impacts on forebay flows. Most notable was that the addition of the BGS and Corner Collector reduced the lateral extent of the recirculation areas on the Washington shore and Cascade Island and reduced the flow velocity parallel to the powerhouse in front of Units 11 and 12. For these same cases, at the turbine intakes across the powerhouse, there was very little difference in the flow volume into the gatewell for the clean forebay, and the forebay with the BGS in place and/or the Corner Collector operating. The largest differences were at Units 11 to 13. The CFD model cases testing the impact of the gatewell slot fillers showed no impact to the forebay flows, but large differences within the gatewells. With the slot fillers, the flow above the standard traveling screen and into the gatewell increased (about 100 cfs at each turbine intake) and the gap flow decreased across the powerhouse for all cases. The increased flow up the gatewell was further enhanced with only half the units operating. The flow into the gatewell slot was increased about 35 cfs for each bay of each intake across the powerhouse; this change was uniform across the powerhouse. The flows in the gatewell of Unit 12, the most impacted unit for the scenarios, was evaluated. In front of the vertical barrier screen, the CFD model with slot fillers showed reduced the maximum velocities (in spite of the increased the flow into the gatewell), and decreased the area of recirculation. The area near the VBS exceeding the normal velocity criteria of 1 ft/s was reduced and the flows were more balanced.

Bonneville↗