Search NASA⌕ Search

SEARCH · Search NASA

Results for “optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Magneto-Structural Combined Dimensional and Topology Optimization of Interior Permanent Magnet Synchronous Machine Rotors

A magneto-structural combined dimensional and topology optimization approach for interior permanent magnet synchronous machine (IPMSM) rotor design is proposed using the Solid Isotropic Material Penalization (SIMP) density-based topology optimization method. This method optimizes the location and dimensions of the permanent magnets (PMs) embedded in the rotor, while simultaneously optimizing the lamination flux barriers using topology optimization.To allow for the location and dimensions of the PMs to change while retaining the same number of mesh elements and connectivity, the mesh must be deformed. Mesh deformation is accomplished using a Laplace smoothing technique. To increase the range of PM displacement and size changes, the non-PM areas of the rotor design domain are divided into sub-regions along whose boundaries the mesh nodes are redistributed also using a Laplace smoothing algorithm. Three examples of IPMSM rotor optimizations are presented to demonstrate the proposed approach.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Design Optimization for Weighted Conduction Loss Minimization in a Dual-Active-Bridge-Based PV Microinverter

This manuscript presents a harmonic-superposition based frequency-domain approach for analysis and optimal design of a single-stage DAB-based DC-AC converter used in low-voltage DC to high voltage AC applications, such as PV microinverter. Specifically, two topological variations and correspondingly different modulation strategies involving up to four control variables (three phase shifts and switching frequency) are analyzed. Optimal trajectories of control variables are determined that result in minimized transformer RMS current at a given average power, while enforcing near-uniform ZVS. To make the design process holistic, an outer optimization loop is used to determine optimal values for the power transfer inductance (integrated as the transformer’s leakage inductance) and turns ratio, which minimize the weighted-average conduction loss contribution to the microinverter’s CEC efficiency. Based on the optimization analyses, a 400 W microinverter prototype is built and experimental results at one operating point are presented, achieving a measured efficiency of 92.8%.

14 SOLAR ENERGY↗
DOE OSTI2022

A New Shape Optimization Approach for Lightweighting Electric Machines Inspired by Additive Manufacturing

Minimizing the mass in electric machines while maintaining superior performance is a new requirement for the advancement of drivetrains used in wind energy and electric mobility. Topology optimization (TO) for lightweighting electric machines using traditional approaches typically explores a restricted design space allowed by standard parametrizable geometry and manufacturing, while advanced methods, such as cell-based density approaches, suffer from a lack of robust manufacturability constraints during the optimization process. To overcome these drawbacks, we explore a grid-independent, boundary optimization where the outer shape of the magnet is parameterized using Bezier curves. We conduct a design of experiments (DOE) to study the effect of different magnet shapes on machine performance by varying the control points on the Bezier curves. A machine-learning-based surrogate model is constructed using the data from the DOE to quantify the relationship between the control points, air-gap torque, and mass. The control points are then optimized to maximize the torque density. The approach is used for minimizing electrical steel mass in the International Energy Agency (IEA) 15-MW radial flux direct-drive wind turbine generator. The new approach to shape optimization resulted in smooth and concise shapes that can be easily additively manufactured with up to a 20-ton reduction in electrical steel mass.

additive manufacturing↗
DOE OSTI2023

A Mobile Edge Computing Framework for Traffic Optimization At Urban Intersections Through Cyber-Physical Integration

The stop-and-go traffic pattern on urban roads often results in excessive energy consumption because of unnecessary vehicle braking, idling, and accelerations. With the widespread and increased use of automobiles, this traffic pattern creates many negative impacts (e.g., delayed travel time, air pollution, and additional carbon emission) on the sustainability of our cities. Taking advantage of the recent emerging Internet of Things (IoT) and edge computing paradigms, we propose a mobile edge computing framework that integrates the capability of real-time vehicle-to-infrastructure communication and intelligent speed optimization algorithms into a mobile app to optimize individual vehicles' driving speed at signalized intersections. The optimization aims to mitigate the stop-and-go traffic pattern and its undesirable consequences in urban transportation systems. The framework consists of (1) a cyberinfrastructure-enabled dynamic messaging system for retrieving and delivering real-time traffic and signal phase and timing information from IoT-connected signal controllers and sensors, (2) a real-time speed optimization algorithm for generating intelligent speed advisory using vehicle's information (e.g., GPS and driving directions from mobile sensing) and corresponding signal and traffic information, and (3) an ad-hoc mobile computing environment that converts drivers' smartphones into edge devices to host the speed optimization algorithms for enabling intelligent advisory on the vehicle's driving speed within signalized corridors. The paper presents the design and implementation of the proposed framework. Finally, we demonstrate the feasibility, usefulness, and energy-saving benefits of our proposed framework and its prototyping mobile app on urban transportation systems through traffic simulation, real-vehicle laboratory experiments, an evaluative survey, and field communication tests. The simulation-based energy evaluation results show that the 100% usage of the mobile app can achieve 24% energy savings in the transportation system.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Joint Optimization for Transport and Bucket Loading Phases of Automated Wheel Loaders

This article investigates optimization of fuel-efficiency and productivity for automated wheel loaders. A control-oriented model for both the transport phase and bucket loading phase is proposed. Here, the vehicle model includes an automatic gear shift schedule that can be incorporated into the optimization problem. Based on the model, the multistage optimization problem is formulated to simultaneously consider all phases of a short cycle with physical constraints. Cycle time and fuel efficiency are used as the weighted performance indexes in a multiobjective cost function. Bucket fill factor is included as a constraint during the bucket loading phase. A nonlinear programming problem is created with collocation using MATLAB and CasADi. The optimization solver IPOPT solves the problem to obtain the optimal state and control trajectories, which can be used as a reference for automated wheel loaders or even as a driver advisory for human-driven wheel loaders.

42 ENGINEERING↗
DOE OSTI2019

Online Primal-Dual Methods With Measurement Feedback for Time-Varying Convex Optimization

This paper addresses the design and analysis of feedback-based online algorithms to control systems or networked systems based on performance objectives and engineering constraints that may evolve over time. The emerging timevarying convex optimization formalism is leveraged to model optimal operational trajectories of the systems, as well as explicit local and network-level operational constraints. Departing from existing batch and feed-forward optimization approaches, the design of the algorithms capitalizes on an online implementation of primal-dual projected-gradient methods; the gradient steps are, however, suitably modified to accommodate feedback from the system in the form of measurements - hence, the term 'online optimization with feedback.' By virtue of this approach, the resultant algorithms can cope with model mismatches in the algebraic representation of the system states and outputs, they avoid pervasive measurements of exogenous inputs, and they naturally lend themselves to a distributed implementation. Under suitable assumptions, analytical convergence claims are established in terms of dynamic regret. Furthermore, when the synthesis of the feedback-based online algorithms is based on a regularized Lagrangian function, Q-linear convergence to solutions of the time-varying optimization problem is shown.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Multi-objective optimization of root phenotypes for nutrient capture using evolutionary algorithms

Root phenotypes are avenues to the development of crop cultivars with improved nutrient capture, which is an important goal for global agriculture. The fitness landscape of root phenotypes is highly complex and multidimensional. It is difficult to predict which combinations of traits (phene states) will create the best performing integrated phenotypes in various environments. Brute force methods to map the fitness landscape by simulating millions of phenotypes in multiple environments are computationally challenging. Evolutionary optimization algorithms may provide more efficient avenues to explore high dimensional domains such as the root phenotypic space. We coupled the three-dimensional functional–structural plant model, SimRoot, to the Borg Multi-Objective Evolutionary Algorithm (MOEA) and the evolutionary search over several generations facilitated the identification of optimal root phenotypes balancing trade-offs across nutrient uptake, biomass accumulation, and root carbon costs in environments varying in nutrient availability. Our results show that several combinations of root phenes generate optimal integrated phenotypes where performance in one objective comes at the cost of reduced performance in one or more of the remaining objectives, and such combinations differed for mobile and non-mobile nutrients and for maize (a monocot) and bean (a dicot). Functional–structural plant models can be used with multi-objective optimization to identify optimal root phenotypes under various environments, including future climate scenarios, which will be useful in developing the more resilient, efficient crops urgently needed in global agriculture.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Pareto Optimal and Dual-Objective Geometric and Structural Design of an Underwater Kite for Closed-Loop Flight Performance

This paper presents the formulation and results for a control-aware optimization of the combined geometric and structural design of an energy-harvesting underwater kite. Because kite-based energy-harvesting systems, both airborne and underwater, possess strong coupling between closed-loop flight control, geometric design, and structural design, consideration of all three facets of the design within a single codesign framework is highly desirable. However, while prior literature has addressed one or two attributes of the design at a time, this work constitutes the first comprehensive effort aimed at addressing all three. In particular, focusing on the goals of power maximization and mass minimization, we present a codesign formulation that fuses a geometric optimization tool, structural optimization tool, and closed-loop flight efficiency map. The resulting integrated codesign tool is used to address two mathematical optimization formulations that exhibit subtle differences: a Pareto optimal formulation and a dual-objective formulation that focuses on a weighted power-to-mass ratio as the techno-economic metric of merit. Further, based on the resulting geometric and structural designs, using a mediumfidelity closed-loop simulation tool, the proposed formulation is shown to achieve more than three times the powerto-mass ratio of a previously published, unoptimized benchmark design.

42 ENGINEERING↗
DOE OSTI2022

Optimal band selection for target detection with a LWIR multispectral imager

Multispectral imaging can offer many benefits in cost, complexity, resolution, size, weight, and power, relative to hyperspectral imaging. When designing a multispectral system, spectral bandpasses can be selected using optimization algorithms configured to maximally separate target detection scores between target and background regions. A hyperspectral image (HSI) can serve as the source of data from which band groupings can be tested for optimality. The output of an adaptive cosine estimator target detection algorithm is used in an objective function. Three optimization algorithms are compared: particle swarm, dual annealing, and differential evolution. A global optimum is also found using a brute force approach on the Livermore Computing Syrah supercomputer. Three materials are investigated: calcite, gypsum, and limestone. This is done for 3-, 4-, and 5-band systems. The data originate from a longwave infrared HSI of a material display board. The optimization algorithms were run 30 times for every scenario. Performance statistics (maximum, minimum, mean, standard deviation, and median) based on the separation values are given. Additional characterization was performed using receiver operator characteristic (ROC) curves and the area under the ROC curve. While good performance was obtained for the three optimization algorithms, the dual annealing algorithm produced the highest and most consistent detection separation scores on average.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

An Efficient Parallel-in-Time Method for Optimization with Parabolic PDEs

To solve optimization problems with parabolic PDE constraints, often methods working on the reduced objective functional are used. They are computationally expensive due to the necessity of solving both the state equation and a backward-in-time adjoint equation to evaluate the reduced gradient in each iteration of the optimization method. In this study, we investigate the use of the parallel-in-time method PFASST in the setting of PDE-constrained optimization. In order to develop an efficient fully time-parallel algorithm, we discuss different options for applying PFASST to adjoint gradient computation, including the possibility of doing PFASST iterations on both the state and the adjoint equations simultaneously. Here, we also explore the additional gains in efficiency from reusing information from previous optimization iterations when solving each equation. Numerical results for both a linear and a nonlinear reaction-diffusion optimal control problem demonstrate the parallel speedup and efficiency of different approaches.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Domain Decomposition for Integer Optimal Control with Total Variation Regularization

Total variation integer optimal control problems admit solutions and necessary optimality conditions via geometric variational analysis. In spite of the existence of said solutions, algorithms which solve the discretized objective suffer from high numerical cost associated with the combinatorial nature of integer programming. Hence, such methods are often limited to small and medium-sized problems. We propose a globally convergent, coordinate descent–inspired algorithm that allows tractable subproblem solutions restricted to a partition of the domain. Our decomposition method solves relatively small trust-region subproblems that modify the control variable on a subdomain only. Given nontrivial subdomain overlap, we prove that a global first-order necessary optimality condition is equivalent to a first-order necessary optimality condition per subdomain. We additionally show that a sufficient decrease is achieved on a single subdomain by way of a trust-region subproblem solver using geometric measure–theoretic arguments, which we integrate with a greedy patch selection to prove convergence of our algorithm. In conclusion, we demonstrate the practicality of our algorithm on a benchmark large-scale, PDE-constrained integer optimal control problem and find that our method is faster than the state of the art.

domain decomposition↗
DOE OSTI2026

Optimized Tandem Catalyst Patterning for CO 2 Reduction Flow Reactors

Tandem catalysis involves two or more catalysts arranged in proximity within a single reaction vessel, with the aim of synergistically aligning the catalysts’ reaction pathways to maximize overall system performance. This study presents a proof of concept showing the integration of continuum transport modeling with design optimization in a simplified two-dimensional flow reactor setup for electrochemical CO 2 reduction. Ag catalysts provide the CO 2 ⟶ CO reaction capability, and Cu catalysts provide the CO ⟶ high-value products reaction capability. Given a set of input parameters, the optimization algorithm uses adjoint methods to modify the Ag/Cu surface patterning in order to maximize the current density toward high-value products, such as ethylene. The optimized designs yield significant performance enhancement especially at more negative applied voltages (i.e., stronger surface reactions) and for larger numbers of patterning sections. For an applied voltage of −1.7 V vs. SHE, the 12-section optimized design increases the current density toward ethylene by up to 65% compared to the unoptimized 2-section design. For the optimized cases, observed differences in the production and consumption of CO (the key intermediate species) and minimized zones of low CO reactant surface concentration on Cu sections explain the improved reactor performance.

CO2 reduction↗
DOE OSTI2017

Improving the FLORIS wind plant model for compatibility with gradient-based optimization

The FLORIS (FLOw Redirection and Induction in Steady-state) model, a parametric wind turbine wake model that predicts steady-state wake characteristics based on wind turbine position and yaw angle, was developed for optimization of control settings and turbine locations. This article provides details on changes made to the FLORIS model to make the model more suitable for gradient-based optimization. Changes to the FLORIS model were made to remove discontinuities and add curvature to regions of non-physical zero gradient. Exact gradients for the FLORIS model were obtained using algorithmic differentiation. A set of three case studies demonstrate that using exact gradients with gradient-based optimization reduces the number of function calls by several orders of magnitude. The case studies also show that adding curvature improves convergence behavior, allowing gradient-based optimization algorithms used with the FLORIS model to more reliably find better solutions to wind farm optimization problems.

17 WIND ENERGY↗
DOE OSTI2017

COMPARISON OF NONLINEAR DYNAMICS OPTIMIZATION METHODS FOR APS-U

Many different objectives and genetic algorithms have been proposed for storage ring nonlinear dynamics performance optimization. These optimization objectives include nonlinear chromaticities and driving/detuning terms, on-momentum and off-momentum dynamic acceptance, chromatic detuning, local momentum acceptance, variation of transverse invariant, Touschek lifetime, etc. In this paper, the effectiveness of several different optimization methods and objectives are compared for the nonlinear beam dynamics optimization of the Advanced Photon Source upgrade (APS-U) lattice. The optimized solutions from these different methods are preliminarily compared in terms of the dynamic acceptance, local momentum acceptance, chromatic detuning, and other performance measures.

APS-U∗↗
DOE OSTI2017

Market-Based and System-Wide Fuel Cycle Optimization

This work introduces automated optimization into fuel cycle simulations in the Cyclus platform. This includes system-level optimizations, seeking a deployment plan that optimizes the performance over the entire transition, and market-level optimization, seeking an optimal set of material trades at each time step. These concepts were introduced in a way that preserves the flexibility of the Cyclus fuel cycle framework, one of its most important design principles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Quantum Computing in Next-Generation Transportation Optimization

We explore how quantum computing (QC) can advance transportation optimization, with a focus on two high-impact areas: traffic signal control and vehicle electrification with grid integration. As transportation systems grow in complexity, classical optimization methods increasingly struggle to deliver scalable and efficient solutions, particularly for real-time, data-rich environments. This work identifies key challenges within these two domains where QC may offer advantages, particularly in handling combinatorial decision spaces and dynamic constraints. We begin by outlining the limitations of classical approaches for traffic signal control optimization and electric vehicle charging coordination, highlighting where computational limitations arise. Previous quantum formulations are presented and new formulations are proposed to demonstrate how emerging quantum algorithms, including quantum annealing and the Quantum Approximation Optimization Algorithm, could be leveraged to reformulate and address these problems. We also evaluate the suitability of current quantum hardware and discuss recent trends that indicate when QC may become a viable tool for transportation applications. While acknowledging the present limitations of QC technologies, this poster emphasizes the importance of preparing quantum-compatible models today. By reviewing and establishing formulations that align with the strengths of quantum algorithms, researchers and practitioners can better position themselves to take advantage of QC advancements as they occur. This work aims to provide a practical, forward-looking perspective on the near-term potential of quantum computing in transportation optimization.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

OptiBench: An Optimization Benchmark Tool for Renewable Energy Problems

We propose a benchmark framework and visualization tool, OptiBench, for analyzing the performance of state-of-the-art optimization solvers across a variety of optimization problems in renewable energy research. Our framework is designed from the ground up in the Julia programming language and enables analysis at scale on high performance computing (HPC) systems. Our visualization tool allows effortless evaluation of optimization solver performance, robustness, and accuracy through intuitive plots, e.g., performance profiles, heat maps, and distribution plots. We have tested three benchmark suites relevant to the modeling of renewable energy systems, viz., CUTEst, PGLib-OPF, and WaterTAP water treatment optimization problems. We illustrate benchmarking of CUTEst using OptiBench on the National Laboratory of the Rockies's (NLR) HPC Kestrel. Our findings indicate that MA57 HSL linear solver demonstrated the best overall performance for an experimental IPOPT implementation. Our work is ongoing and we intend to add support for more optimization solvers and benchmark test suites in the future.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Superstructure Optimization for Brine Valorization from Brackish Water Desalination

This poster presents preliminary results from a superstructure optimization framework developed to identify cost-optimal brine valorization configurations for brackish water desalination plants across diverse U.S. regional feed chemistries. The study uses brackish groundwater compositions from Arizona, California, Florida, New Mexico, and Texas. Using Pyomo Generalized Disjunctive Programming (GDP) within the WaterTAP modeling environment, the optimization framework simultaneously evaluates thousands of candidate treatment configurations, spanning nanofiltration, reverse osmosis, and chemical precipitation, to minimize the levelized cost of water (LCOW) while meeting water recovery targets and product recovery constraints. Results across eight representative feed clusters demonstrate water recovery rates of 57–87% and net LCOW values ranging from -$0.032/m³ (net revenue-positive) to $0.80/m. Notably, no single process configuration was optimal across all feed types, underscoring the necessity of feed-specific optimization. Products targeted include calcium carbonate (CaCO₃) at $0.01/kg and sodium chloride (NaCl) at $0.10/kg, both at 95% purity, with product revenues offsetting treatment costs in several scenarios. The work advances NAWI's process systems engineering capabilities for multi-configuration screening.

58 GEOSCIENCES↗