SEARCH · Search NASA

Results for “stability selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Carbon Capture Beyond Amines: CO 2 Sorption at Nucleophilic Oxygen Sites in Materials

Carbon capture and utilization or sequestration and direct air capture will be needed to reduce atmospheric levels of greenhouse gases over the next century. Current amine-based technologies bind CO 2 with high selectivities but suffer from poor oxidative and thermal stabilities. Herein, we discuss understudied sorbents based on oxygen nucleophiles, including metal oxides and hydroxides, hydroxide-containing polymers, and hydroxide-based metal–organic frameworks. In general, these materials display improved oxidative stabilities compared to traditional amine-based sorbents. Here, we outline the challenges and opportunities offered by these alternative sorbents for carbon capture applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Single-step conversion of ethanol into n-butene-rich olefins over metal catalysts supported on ZrO 2 -SiO 2 mixed oxides

With airlines committed to drastically reduce their carbon footprint by 2050, producing jet fuel from renewable ethanol is of particular interest. Here we reported on an Ag/ZrO 2 /SBA-16 catalyst that is very effective for directly converting ethanol into to n-butene-rich olefins jet fuel precursors (i.e., 88% at full conversion). Here, we report on a Cu/ZrO 2 /SBA-16 catalyst that presents remarkable olefins selectivity (i.e., 89% at 96% conversion) and enhanced stability as compared to Ag/ZrO2/SBA-16 catalyst. Under severe operating conditions a conversion loss < 10% was observed with the Cu/ZrO 2 /SBA-16 catalyst as compared to a 50% loss of conversion with the Ag/ZrO 2 /SBA-16 catalyst. Combined experimental and computational tools revealed that replacing Ag with Cu shifts the reaction pathway of crotonaldehyde hydrogenation from 1,3-butadiene (i.e., coke precursor) production to butyraldehyde formation. Experiments conducted with 4%Cu/4%ZrO 2 supported on SBA-16, dealuminated zeolite Beta, and aluminum silicate revealed the performance and stability advantage of the SBA-16-supported catalyst.

09 BIOMASS FUELS↗

DOE OSTI2016

Deep eutectic solvent approach towards nickel/nickel nitride nanocomposites

Nickel nitride is an attractive material for a broad range of applications including catalysis. However preparations and especially those targeting nanoscale particles remain a major challenge. Herein, we report a wet-chemical approach to produce nickel/nickel nitride nanocomposites using deep eutectic solvents. A choline chloride/urea deep eutectic solvent was used as a reaction medium to form gels containing nickel acetate tetrahydrate. Heat treatment of the gel in inert atmosphere forms nanoparticles embedded within a nitrogen-doped carbon matrix. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to understand the decomposition profile of the precursors and to select pyrolysis temperatures located in regions of thermal stability. X-ray diffraction (XRD) confirmed the presence of metallic nickel, whereas X-ray photoelectron spectroscopy (XPS) suggested the existence of a nickel nitride surface layer. According to transmission electron microscopy (TEM) analysis these mixed phase, possibly core-shell type nanoparticles, have very defined facets. Furthermore, these materials represent a unique opportunity to tune catalytic properties of nickel-based catalysts through control of their composition, surface structure, and morphology; in addition to employing potential benefits of a nitrogen-doped carbon support.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Transformation and twinning induced plasticity in metastable Ti-Mo alloys under high strain rate deformation

The development of metastable titanium (Ti) alloys provides an unprecedented opportunity to expand their use in plasticity and damage critical applications like protective structures. However, such applications require knowledge of quasi-static to dynamic mechanical behavior, which is currently lacking. Here we perform in-situ, ultrafast synchrotron x-ray diffraction during high strain rate (Kolsky) pressure bar testing in tension and post-mortem electron microscopy to study TRansformation Induced Plasticity (TRIP) and TWinning Induced Plasticity (TWIP) in metastable Ti-Mo alloys. Two alloys, namely Ti-12Mo and Ti-15Mo (wt.%), were selected for study having different β -phase chemical stabilities. TWIP was observed in both Ti-12Mo and Ti-15Mo by in-situ synchrotron diffraction during high strain rate testing. Post-mortem microstructural characterization also revealed the presence of TRIP in Ti-12Mo. TWIP in Ti-15Mo was found to under-perform in terms of total elongation compared to TRIP/TWIP in Ti-12Mo. Ti-12Mo exhibited an average elongation of 17% compared to only 12% for Ti-15Mo with deformation at 1000 s -1 . In conclusion, TRIP resulted in significantly finer microstructure evolution and alleviated local strain accumulations in Ti-12Mo, suggesting TRIP can be used to tune available strength/ductility combinations in metastable Ti alloys under high strain rate deformation conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Graphene-Supported Monometallic and Bimetallic Dimers for Electrochemical CO 2 Reduction

Bimetallic catalysts are attractive alternatives to extend the parameter space that can be tuned for support interactions and catalytic performance. In this study, we have investigated the smallest bimetallic catalysts dimers supported on defective graphene for the electrochemical reduction of CO 2 to CH 4 based on a first-principles approach and the computational hydrogen electrode model. The monometallic and bimetallic dimers formed from Group 10 (Ni, Pd, Pt) and group 11 (Cu, Ag, Au) elements are characterized by a positively charged anchoring atom occupying the vacancy site of graphene and a neutral or slightly negatively charged antenna atom sticking out from the graphene surface. The strong selective binding of these dimers ensures their high stability. Possible rate-limiting steps are identified from the full reaction pathways to generate CH4. Overall, Pt-2, AgNi, Pd-2, and AgPt are the best candidates with the lowest overpotential values of 0.37, 0.69, 0.69, and 0.76 V, respectively. It is found that the alloy effect and the interaction with support help to optimize the property. These metallic dimers, however, retain nonmonotonous property relationships that give opportunity to go beyond scaling behavior and look for a few atom catalysts that have unique properties to reduce rate-limiting potentials and improve the catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Short–Term Forecasting of Wind Gusts at Airports Across CONUS Using Machine Learning

Short–term forecasting of wind gusts, particularly those of higher intensity, is of great societal importance but is challenging due to the presence of multiple gust generation mechanisms. Wind gust observations from eight high–passenger–volume airports across the continental United States (CONUS) are summarized and used to develop predictive models of wind gust occurrence and magnitude. These short–term (same hour) forecast models are built using multiple logistic and linear regression, as well as artificial neural networks (ANNs) of varying complexity. A suite of 19 upper–air predictors drawn from the ERA5 reanalysis and an autoregressive (AR) term are used. Stepwise procedures instruct predictor selection, and resampling is used to quantify model stability. All models are developed separately for the warm (April–September) and cold (October–March) seasons. Results show that ANNs of 3–5 hidden layers (HLs) generally exhibit higher hit rates than logistic regression models and also improve skill with respect to wind gust magnitudes. However, deeper networks with more HLs increase false alarm rates in occurrence models and mean absolute error in magnitude models due to model overfitting. For model skill, inclusion of the AR term is critical while the majority of the remaining skill derives from wind speeds and lapse rates. A predictive ceiling is also clearly demonstrated, particularly for the strong and damaging gust magnitudes, which appears to be partially due to ERA5 predictor characteristics and the presence of mixed wind climates.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2014

Stability of Iowa mutant and wild type Aβ-peptide aggregates

Recent experiments indicate a connection between the structure of amyloid aggregates and their cytotoxicity as related to neurodegenerative diseases. Of particular interest is the Iowa Mutant, which causes early-onset of Alzheimer's disease. While wild-type Amyloid β-peptides form only parallel beta-sheet aggregates, the mutant also forms meta-stable antiparallel beta sheets. Since these structural variations may cause the difference in the pathological effects of the two Aβ-peptides, we have studied in silico the relative stability of the wild type and Iowa mutant in both parallel and antiparallel forms. We compare regular molecular dynamics simulations with such where the viscosity of the samples is reduced, which, we show, leads to higher sampling efficiency. By analyzing and comparing these four sets of all-atom molecular dynamics simulations, we probe the role of the various factors that could lead to the structural differences. Our analysis indicates that the parallel forms of both wild type and Iowa mutant aggregates are stable, while the antiparallel aggregates are meta-stable for the Iowa mutant and not stable for the wild type. The differences result from the direct alignment of hydrophobic interactions in the in-register parallel oligomers, making them more stable than the antiparallel aggregates. The slightly higher thermodynamic stability of the Iowa mutant fibril-like oligomers in its parallel organization over that in antiparallel form is supported by previous experimental measurements showing slow inter-conversion of antiparallel aggregates into parallel ones. Knowledge of the mechanism that selects between parallel and antiparallel conformations and determines their relative stability may open new avenues for the development of therapies targeting familial forms of early-onset Alzheimer's disease.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

Characterization of a new electrostatic storage ring for photofragmentation experiments

We describe the design of and the first commissioning experiments with a newly constructed electrostatic storage ring named SAPHIRA (Storage Ring in Aarhus for PHoton-Ion Reaction Analysis). With an intense beam of Cu{sup −} at 4 keV, the storage ring is characterized in terms of the stored ion beam decay rate, the longitudinal spreading of an injected ion bunch, as well as the direct measurements of the transverse spatial distributions under different conditions of storage. The ion storage stability in SAPHIRA was investigated systematically in a selected region of its electrical configuration space.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Electrical and thermal characteristics of LaB6 thermionic hollow cathodes operating in He, D2, Ar, and Xe at 4–200 Pa and 0.25–5 A cm−2

We report characteristics of lanthanum hexaboride (LaB6) cathodes for conditions relevant to a high-voltage, high-current switching device. LaB6 is selected because of its relatively low work function, stability in the presence of many common gas impurities, and a low evaporation rate (long life) at operating temperatures. We have investigated the effect of cathode geometry, gas type, pressure, and current on a LaB6 hollow cathode in a diode configuration with an opposing planar anode. The gas is stagnant at a relatively low pressure of 4–200 Pa (0.03–1.5 Torr) because of device high-voltage standoff requirements. In all cases, the plasma voltage decreases to a plateau value with increasing current where a practical device would operate. The plateau voltage aligns with the fill gas excitation or ionization voltage, depending on conditions. At high current, the cathode temperature exceeds that required for thermionic emission to supply the total current, a behavior that is understood by accounting for back-diffusing bulk electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2018

NSTX-U In-Vessel Control Coils’ Design Concept

In this paper, a successful conceptual design was completed to develop in-vessel control coils [non-axisymmetric control coils (NCCs)]. The NCCs are a series of saddle coils that are intended to satisfy a number of physics criteria including magnetic breaking, error field control, fast resistive wall mode (RWM) control, and edge-localized-mode stabilization. Customized mineral-insulated cable (MIC) was selected for the conductor material. The MIC was made from oxygen-free copper conductor, high purity magnesium oxide powder insulation, and 304 stainless steel sleeve cover. Sample MIC was purchased from an outside supplier, and various tests were conducted for design and performance verification including high-voltage testing, which necessitated the development of special test terminations. A concept design was also developed for terminating the MIC ends using the nonconductive and vacuum-sealed technique. Two alternative designs were proposed for joints inside the vacuum vessel (VV). The NCCs are designed to be mounted in front of the primary passive plates and underneath the plasma-facing component (PFC) tiles. The passive plates will be modified to accommodate the coils. A new PFC tile design concept was developed using high-Z materials. New designs for the penetrations through the VV wall were developed. One port per coil was planned. Finally, a new power patch panel will be required to provide the ability for various combinations of connections between the NCC, the existing RWM coils, and the existing switching power amplifier power suppliers.

42 ENGINEERING↗

DOE OSTI2026

A dual membrane-adsorption evaporator for solar-powered lithium extraction from complex brines

A reliable supply of lithium is required to meet the increased demand for batteries over the coming decades. In this work, we demonstrated the potential to effectively extract lithium from brines by coupling solar-powered evaporation, adsorption, and membrane technologies together. We first synthesized a three-dimensional adsorptive evaporator by coating a lithium manganese oxide material onto a cotton stick using an easily scalable, one-step method. An osmotic membrane was then installed at the root of the evaporator to enhance the lithium to magnesium selectivity, prevent scaling caused by divalent cations, and thus further increase the water evaporation flux. The operation of the dual membrane-adsorption evaporator is entirely driven by osmosis and capillary force, demanding no extra energy input. The integration of the osmotic membrane was found to increase the lithium to magnesium selectivity over 10-fold to higher than 40. The dual process also produced high lithium to calcium selectivity and proved to sustain long-term stability by self-managing its internal osmotic pressure. Last, a test was done in three simulated brine solutions with varied brine chemistry and the evaporation rate stayed high and consistent throughout the long-term test. This illustrates that this technology can be used in varied brine solutions throughout the world providing efficient lithium capture and separation from competing divalent cations.

Eskafi, Aydin F. [University of California, Berkel↗

DOE OSTI2019

Creation of a functional hyperthermostable designer cellulosome

Renewable energy has become a field of high interest over the past decade, and production of biofuels from cellulosic substrates has a particularly high potential as an alternative source of energy. Industrial deconstruction of biomass, however, is an onerous, exothermic process, the cost of which could be decreased significantly by use of hyperthermophilic enzymes. An efficient way of breaking down cellulosic substrates can also be achieved by highly efficient enzymatic complexes called cellulosomes. The modular architecture of these multi-enzyme complexes results in substrate targeting and proximity-based synergy among the resident enzymes. However, cellulosomes have not been observed in hyperthermophilic bacteria. Here, we report the design and function of a novel hyperthermostable “designer cellulosome” system, which is stable and active at 75 °C. Enzymes from Caldicellulosiruptor bescii, a highly cellulolytic hyperthermophilic anaerobic bacterium, were selected and successfully converted to the cellulosomal mode by grafting onto them divergent dockerin modules that can be inserted in a precise manner into a thermostable chimaeric scaffoldin by virtue of their matching cohesins. Three pairs of cohesins and dockerins, selected from thermophilic microbes, were examined for their stability at extreme temperatures and were determined stable at 75 °C for at least 72 h. The resultant hyperthermostable cellulosome complex exhibited the highest levels of enzymatic activity on microcrystalline cellulose at 75 °C, compared to those of previously reported designer cellulosome systems and the native cellulosome from Clostridium thermocellum. The functional hyperthermophilic platform fulfills the appropriate physico-chemical properties required for exothermic processes. This system can thus be adapted for other types of thermostable enzyme systems and could serve as a basis for a variety of cellulolytic and non-cellulolytic industrial objectives at high temperatures.

09 BIOMASS FUELS↗

DOE OSTI2021

CO2 Electrolyzer to Produce Formic Acid at Industry Relevant Current Density

Electrochemical CO2 reduction reaction (CO2RR) to produce formic acid has attracted great interest recently since formic acid can be used as a feedstock for biorefineries. Over the past decade, much effort has been devoted to the prospects of electrochemical CO2 conversion to formic acid. However, issues including low current density, low selectivity, low energy efficiency, poor long-term stability, and production of formate salts instead of formic acid remain as the great challenges for the development and commercialization of this technology. Recently, Dioxide Materials (DM) has developed an electrolyzer technology that can directly convert CO2 to pure formic acid with a three-compartment CO2 electrolyzer. In this work, DM will present our recent effort on improving the electrolyzer performance operating at industry relevant current density (200 mA/cm2). We have demonstrated 200 mA/cm² with 80% Faradaic efficiency for 1000 hours of operation. The effects of CO2 concentration and impurities in the flue gas on the electrolyzer performance will be discussed, as will ongoing efforts to test the device at a coal fired power plant. The long-term (1000 h) performance of the electrolyzer will also be presented.

Yang, Hongzhou↗

DOE OSTI2017

Single-molecule FRET unveils induced-fit mechanism for substrate selectivity in flap endonuclease 1

Human flap endonuclease 1 (FEN1) and related structure-specific 5’nucleases precisely identify and incise aberrant DNA structures during replication, repair and recombination to avoid genomic instability. Yet, it is unclear how the 5’nuclease mechanisms of DNA distortion and protein ordering robustly mediate efficient and accurate substrate recognition and catalytic selectivity. Here, single-molecule sub-millisecond and millisecond analyses of FEN1 reveal a protein-DNA induced-fit mechanism that efficiently verifies substrate and suppresses off-target cleavage. FEN1 sculpts DNA with diffusion-limited kinetics to test DNA substrate. This DNA distortion mutually ‘locks’ protein and DNA conformation and enables substrate verification with extreme precision. Strikingly, FEN1 never misses cleavage of its cognate substrate while blocking probable formation of catalytically competent interactions with noncognate substrates and fostering their pre-incision dissociation. These findings establish FEN1 has practically perfect precision and that separate control of induced-fit substrate recognition sets up the catalytic selectivity of the nuclease active site for genome stability.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1974

Feasibility study for the development of low temperature curing adhesives

The feasibility of a new approach for the development of stable, easily handled, room temperature (293 K - 311 K) curing adhesives was studied and demonstrated. The work concentrated on a family of unsaturated amide/ester resins. Twelve candidate resins were synthesized and tested for completeness of cure at room temperature, adhesion to aluminum and titanium, shear strength, moisture resistance and heat stability. The three most promising candidate resins were selected and recommended for further development.

Green, H. E.↗

NASA NTRS1980

Pointing control for the International Comet Mission

The design of the pointing control system for the proposed International Comet Mission, intended to fly by Comet Halley and rendezvous with Comet Tempel-2 is presented. Following a review of mission objectives and the spacecraft configuration, design constraints on the pointing control system controlling the two-axis gimballed scan platform supporting the science instruments are discussed in relation to the scientific requirements of the mission. The primary design options considered for the pointing control system design for the baseline spacecraft are summarized, and the design selected, which employs a target-referenced, inertially stabilized control system, is described in detail. The four basic modes of operation of the pointing control subsystem (target acquisition, inertial hold, target track and slew) are discussed as they relate to operations at Halley and Tempel-2. It is pointed that the pointing control system design represents a significant advance in the state of the art of pointing controls for planetary missions.

Leblanc, D. R.↗

NASA NTRS1985

Space Station truss structures and construction considerations

Although a specific configuration has not been selected for the Space Station, a gravity gradient stabilized station as a basis upon which to compare various structural and construction concepts is considered. The Space Station primary truss support structure is described in detail. Three approaches (see sketch A) which are believed to be representative of the major techniques for constructing large structures in space are also described in detail so that salient differences can be highlighted.

Mikulas, M. M., Jr.↗

NASA NTRS1986

Ionized polycyclic aromatic hydrocarbons in space

The mid-infrared spectrum of a continuously increasing number of stellar objects, planetary and reflection nebulae, H-II regions and extragalactic sources show a distinctive set of broad emission features at 3.3, 3.4, 6.2, 7.7, 8.6, and 11.3 micron known collectively as the unidentified infrared emission bands. A model is summarized in which the bands arise from positively charged polycyclic hydrocarbons (PAH's) on the basis of their low ionization potential and the excellent agreement between the emission bands and laboratory spectra of auto exhaust which contains these types of molecules. The proposed presence of PAHs in such a variety of objects points to their presence in the interstellar medium. Out of a previously published collection of solid state PAH radical cation spectra five were selected on the basis of the unique thermodynamic stability of their carrier and compared directly to the wavelengths of the DIB's. Although the match seems quite favorable, strongly suggesting that PAH radicals are the long sought after carrier of the diffuse interstellar absorption bands, much laboratory work must be done to test this hypothesis.

Barker, J.↗