Search NASA⌕ Search

SEARCH · Search NASA

Results for “(MO)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect of Si/Al ratio of ZSM-5 support on structure and activity of Mo species in methane dehydroaromatization

The effect of the Si/Al ratio of the ZSM-5 support on the structure and activity of Mo/HZSM-5 catalysts in methane dehydroaromatization (MDA) was studied. ZSM-5 (with Si/Al = 15, 25, and 40) supported Mo oxide catalysts (MoOx/ZSM-5) with 3 and 10 wt% Mo loading were prepared by incipient wetness impregnation followed by calcination in air at 500 °C. The as-prepared catalysts were activated by temperature programmed reduction in hydrogen in order to maximize Mo dispersion. To understand the structure-activity relationship, the fresh and spent samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2 adsorption isotherms, Scanning Transmission Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (STEM-EDS), X-ray absorption spectroscopy (EXAFS and XANES), thermogravimetric analysis (TGA), and Raman spectroscopy. The results show that the Si/Al ratio does not influence the the local structure around the Mo centers. It does however affect the number of available Brønsted acid sites in the support and the amount of Mo species entering the zeolite channels. A lower Si/Al ratio and higher Mo loading resulted in a higher Mo occupation within the zeolite channels. The higher channel occupation directly correlated with higher benzene selectivity and yield, as well as a lower catalyst deactivation rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

ZrN coating as diffusion barrier in U(Mo) dispersion fuel systems

The control of the interaction between the U(Mo) fuel phase and the Al matrix is one of the challenges of dispersion fuel plate development for research reactors. Given the specific properties of this interaction layer, larger amounts of it in the meat could lead to a reduction of the plate mechanical integrity and thermal conductivity, eventually leading to pillowing. The SELENIUM project showed that by depositing a ZrN coating on the surface of the U(Mo) fuel particles, the amount of formed U(Mo)-Al interaction layer is limited but still present. Microstructural analysis performed on the as fabricated coating and fresh fuel plates containing ZrN coated U(Mo) dispersed in an Al matrix, revealed that the coating gets damaged during plate production. The post irradiation examinations (PIE) of the ZrN coated U(Mo) fuel plates, from the SELENIUM and SEMPER FIDELIS experiments, show how the U(Mo)-Al interaction layer is formed -only at those locations where the coating is missing or damaged -and the evolution of coating microstructure during irradiation. Finally, as a remedy, to further reduce the amount of interaction layer formed, the use of an Al-Si matrix was proposed based on the higher affinity of Si for U compared to the affinity of Al for U. PIE of a fuel plate consisting of ZrN coated U(Mo) dispersed in an Al-Si matrix irradiated in the SEMPER FIDELIS experiment, clearly demonstrates the benefit of adding Si to the matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal properties of U-Mo alloys irradiated under high fission power density

A variety of physical and thermal property measurements made on irradiated U-Mo alloy monolithic fuel samples with a Zr diffusion barrier and clad in Al alloy 6061 are reported. These properties form the basis for additional investigations in thermal behavior of U-Mo fuel under high performance research reactor irradiation conditions. Measurements were performed on samples harvested from fuel plates irradiated under high fission power density and surface heat flux and complement previous measurements on samples subjected to moderate fission power density and surface heat flux. Specific heat capacity of irradiated monolithic U-Mo increases with increasing temperature and fission density, but carries large uncertainties associated with thickness measurements used to determine the mass fraction of the layer constituents for extraction of the U-Mo specific heat capacity, specifically the very thin and nonuniform Zr diffusion barrier. Density of irradiated monolithic U-Mo decreases with increasing fission density resulting from fission gas swelling and porosity formation. Thermal diffusivity of irradiated monolithic U-Mo increased with increasing temperature and decreased with increasing fission density. Thermal conductivity of irradiated monolithic U-Mo increased with increasing temperature, and in general, appeared to decrease and become less sensitive to temperature with increasing fission density. Thermal conductivity measurements compared to a semi-empirical model agreed within ±30%. It is suspected that the main driver in deviation between model calculations and measurements is the fission gas swelling determination, which does not account for fission power density or irradiation temperature.

uranium (U), molybdenum, nuclear fuel, thermal con↗
DOE OSTI2022

Potential of electrolytic processes for recovery of molybdenum from molten salts for 99 Mo production

Molten salt reactor (MSR) technologies are receiving significant interest for commercialization because of their potential safety features and efficient energy production. In addition to producing reliable and clean energy, high-value radioisotopes could be harvested from MSRs as an additional revenue stream. Although significant quantities of 99 Mo will be produced in MSRs through fission, how accessible 99 Mo will be for direct recovery from a fuel salt is unclear. Electrolytic processes in fused salts have been used extensively for processing molten salts and have the potential to enable the extraction of 99 Mo directly from the fuel salt. This paper reviews the behavior of 99 Mo in the molten salt reactor experiment and summarizes theoretical aspects of the electrolytic process in high-temperature fused salt and the published experimental results on Mo extraction through electrolytic processes. Here, the general principle of fused-salt electrolytic processes is described, by electrodeposition of Mo with the following aspects: electrowinning, electrorefining, electroplating, and electroextraction with several experimental considerations. Finally, important considerations for recovery of 99 Mo from MSR relevant molten salts via electrodeposition are discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Effect of Ni Dopant on Furan Activation over Mo 2 C Surface: Insights from First-Principles-Based Microkinetic Modeling

Here, the role of Ni dopant in a molybdenum carbide (Mo 2 C) catalyst for butadiene and propyne production from furan is investigated by using a Mo 2 C(001) surface model and first-principles-based microkinetic modeling (MKM). A reaction mechanism including 18 reaction steps is generated to compute the turnover frequency (TOF) of butadiene and propyne from furan gas. The butadiene production is dominant with the TOF being 3-6 orders of magnitude higher than the TOF of propyne on a bare Mo 2 C surface due to an active C-O bond scission reaction compared to C-C bond cleavage reaction. The exothermic binding of ring-opened furan (CHCHCHCHO*) inhibits the activity of a bare Mo 2 C surface for butadiene and propyne production. Calculations predict that Mo 2 C surface modification with a Ni dopant energetically destabilizes the adsorption of CHCHCHCHO*, which facilitates the formation of butadiene and propyne. In the presence of Ni dopants on a Mo 2 C(001) surface, the selectivity toward the butadiene formation is decreased compared to propyne due to relatively favorable C-C bond scission as opposed to the C-O bond scission. This first-principles-based study provides mechanistic and kinetic insights into the role of dopants in cost-efficient Mo 2 C catalysts during the vapor phase conversion of furan to gaseous products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemical control over stoichiometry via cation intercalation into Chevrel-phase sulphides (Cu x Mo 6 S 8 , x = 1-3)

Herein this work presents a systematic investigation of the electrochemical intercalation of aqueous copper cations into the Chevrel phase (CP) Mo 6 S 8 and its effect on the host's electronic and structural characteristics as a function of stoichiometry. The electrochemical potentials at which copper intercalates into the CP Mo 6 S 8 host in 1 M CuSO 4 were identified for Cu x Mo 6 S 8 (x = 1–3) as 0.23 V, 0.11 V, and 0.055 V (vs. Cu/Cu 2+ ) for Cu 1 Mo 6 S 8 , Cu 2 Mo 6 S 8 , and Cu 3 Mo 6 S 8 , respectively, and correlated via ex situ PXRD to stoichiometric content. Potentials were also identified that yield non-stoichiometric phases with traceable Cu content-dependent structural changes. Ab initio DFT calculations were performed to probe thermodynamic stability of Cu x Mo 6 S 8 CP compositions and the metal-to-semiconductor transitions as a function of copper content. Lastly, we demonstrate that the SK-pre-edge intensity is a successful probe for intercalant content: as copper equivalents increase, so does charge transfer to the partially occupied S 3p orbitals, resulting in a decrease in the pre-edge intensity corresponding to the excitation of a S 1s-to-3p/Mo 4d hybridized orbital.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Magnetic order and spin liquid behavior in [Mo 3 ] 11+ molecular magnets

Molecular magnets based on [Mo 3 ] 11+ units with one unpaired electron per trimer have attracted recent interest due to the identification of quantum spin liquid candidacy in some family members. Here, we present comprehensive measurements on polycrystalline samples of ZnScMo 3 O 8 , MgScMo 3 O 8 , and Na 3 Sc 2 Mo 5 O 16 with the same Mo 3 O 13 magnetic building blocks. In this work, the crystal structures are characterized with x-ray or neutron powder diffraction and the magnetic ground states are determined by performing ac and dc susceptibility, specific heat, neutron powder diffraction, and muon spin relaxation measurements. Our work indicates that ZnScMo 3 O 8 and MgScMo 3 O 8 have ferromagnetic Curie-Weiss temperatures of 18.5 and 11.9 K, ordered ground states with net moments (low-moment ferromagnetism or canted antiferromagnetism), and zero field ordering temperatures of $T_c$ = 6 K and $T_c$ < 2 K, respectively. On the other hand, Na 3 Sc 2 Mo 5 O 16 hosts a dynamical magnetic ground state with no evidence for magnetic ordering or spin freezing down to 20 mK despite an antiferromagnetic Curie-Weiss temperature of –36.2 K, and therefore is a candidate for quantum spin liquid behavior. By comparing the present results to past work on the same family of materials, we construct a phase diagram which illustrates that the magnetic ground states of these Mo-based molecular magnets are very sensitive to small changes in the nearest-neighbor Mo-Mo distance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modulating the optoelectronic properties of hybrid Mo-thiolate thin films

In this study, hybrid MoS 2 -based molybdenum thiolate thin films with selected organic motifs are grown using molecular layer deposition (MLD), allowing for tunable optoelectronic film properties. The thin films are deposited at 170°C using the metal precursor molybdenum hexacarbonyl and one of the three organic precursors: 1,2-ethanedithiol, 1,4-butanedithiol, and 1,4-benzenedithiol. The resulting Mo-ethanethiolate, Mo-butanethiolate, and Mo-benzenethiolate films show saturating growth with a growth per cycle of 1.2, 1.0, and 1.5 Å/cycle, respectively. Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy, Raman spectroscopy, x-ray absorption spectroscopy, and x-ray diffraction are used to characterize the as-deposited films. Results show that by changing the organic precursor, the film composition as well as the optical and electronic properties can be tuned. The Mo-thiolate films grown with benzenedithiol exhibit the lowest resistivity, which at 12 mΩ cm is ~400 times more conductive than Mo-thiolates grown with aliphatic organic linkers. All three backbone chemistries of the Mo-thiolates show an optical bandgap between 2.3 and 2.4 eV and mild photoconductivity response. The MLD of these Mo-thiolate films demonstrates the synthesis of transition metal-organosulfur thin films with tunable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Purification and Concentration of 99 Mo from a UREX raffinate

The medical isotope 99m Tc ( t ½ = 6.0 h) accounts for over 80% of isotopes used in diagnostic nuclear medicine today and is normally derived from its transient equilibrium parent 99 Mo ( t ½ = 66 h). To reduce U.S. dependence on 99 Mo derived from HEU by foreign suppliers, the NNSA/M3 program—under the American Medical Isotope Production Act—has been tasked with facilitating the work of domestic 99 Mo suppliers that do not utilize HEU. Superconducting electron linear accelerators with high-Z converter targets can generate bremsstrahlung photons and neutron fluxes that can induce photonuclear reactions and LEU fission. After sufficient production intervals, targets can be rotated out and processed while another batch is irradiated. The process flow chemistry is shown in Figure 1. The irradiated U 3 O 8 targets are retrieved and dissolved in HNO 3 ; the volatile fission products are expelled and captured during this step. The HNO 3 liquor bearing the uranyl, fission and activation products is injected into the UREX suite of liquid-liquid extraction banks. The uranyl is partitioned in typical fashion using tri-$\textit{n}$-butyl phosphate (TBP) in a hydrocarbon diluent. The raffinate—comprising mainly 99 Mo and fission products—is then injected into the MoLLE (Molybdenum Liquid-Liquid Extraction) flowsheet, where the Mo is selectively extracted by an organophosphorous acid extractant such as di-(2-ethylhexyl phosphoric acid) (HDEHP). Trace amounts of Nb, Zr, Np, I, and Te are co-extracted. The Mo is stripped using acetohydroxamic acid (AHA) and fed onto an anion exchange column. Following a series of hydroxide, HCl, and oxalic acid wash steps, the Mo can be recovered in NaOH/NaCl. A manuscript describing this process chemistry in more detail was recently published.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Impact of annealing at 1000°C in flowing He with low O 2 concentration on the room temperature tensile properties of Mo alloys

NorthStar is developing an accelerator-based technology to produce the medical isotope Mo-99. A previous ORNL report (ORNL/SPR-2022/2490) studied the oxidation behavior of Mo in flowing He with low oxygen content at 800°C and 1000°C and it was shown that an O 2 concentration lower than ~5ppm (μ1/1) is required to achieve acceptable oxidation rates for wrought or powder metallurgy (PM) Mo. Oxidation may also impact the mechanical properties of Mo and this report summarizes tensile results at room temperature on wrought and PM Mo before and after exposure at 1000°C in flowing He with O 2 concentration varying from 1 to 15 ppm O 2 . It was found that oxidation at 1000°C results in a significant decrease of Mo strength and ductility with brittle intergranular fracture surfaces, likely due to the segregation of oxygen at grain boundaries. For the PM Mo material, the decrease in strength and ductility was also observed after annealing in vacuum at 1000°C, indicating that the diffusion of the oxygen trapped in the material pores to grain boundaries after 20-100h at 1000°C is sufficient to embrittle the material. Finally, initial results on actual aMo and high-density disks provided by NorthStar revealed the lack of ductility of the materials due to the specific disk microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Radiolytic Gas Generation and Pressure Buildup in a Closed System Containing Mo-99 Solution

This study measured radiolytic gas generation and pressure buildup in a sealed stainless-steel system containing alkaline Mo-99 solution with added sodium nitrate as a hydrogen suppressant. In each of two experiments, approximately 200 Ci of Mo-99 solution was transferred into a closed experimental vessel inside a hot cell, isolated, and monitored for pressure rise caused by gas generation during radioactive decay. After pressure buildup, headspace gas samples were collected and analyzed by mass spectrometry to determine hydrogen and oxygen concentrations. The purpose was to quantify the magnitude of pressure buildup in a closed system and to characterize the gas composition produced by radiolysis of the Mo-99 target solution under representative handling and storage conditions. The two experiments used similar total Mo-99 activity but differed in solution volume, headspace volume, and leak integrity. In the first experiment, 197.5 Ci of Mo-99 in 16.92 mL of solution was loaded into a vessel with a 31.1-mL headspace; a small leak was later identified, and the measured peak pressure of 46 psig was extrapolated to about 70 psig in the absence of leakage. The headspace gas from this experiment contained about 21.4% H2 and 63.4% O2, but the composition was influenced by preferential hydrogen loss through the leak. In the second experiment, 193 Ci of Mo-99 in 5.41 mL of solution with 0.46 g NaNO3 was loaded into a vessel with a larger 42.61 mL headspace, and no detectable leak was observed. This experiment reached a peak pressure of 38 psig, and the measured gas composition was approximately 28.2% H2 and 51.5% O2. Because the second experiment was leak-free, it is considered the more reliable indicator of the true pressure buildup and intrinsic radiolytic gas composition of the Mo-99 solution.

Chemerisov, Sergey D.↗
NASA NTRS1983

Preliminary discussion on the origin of Lei-gong-mo (tektites)

The specimens of lei-gong-mo (tektites) were collected from Hainan Island and Leizhow Peninsula during the period from 1963 to 1975. The distribution, forms, sculpture, abration surface (bald spot), internal structure and chemical composition of lei-gong-mo are discussed. Studies of these materials lead to the following conclusions: (1) the specimens of lei-gong-mo can be morphologically divided into eight types; (2) the sculptures on the surface of lei-gong-mo are probably due to the corrosion effect of volcanic gas, and the abration surface due to the aerodynamic corrosion; (3) the folded structures in the layered lei-gong-mo (Muong Nong-type tektite) seem hardly to be formed by an impact of meteorites, but they might be produced in the magma flow process when the lei-gong-mo was melting within the crater vent; and (4) the comparison of its chemical composition with that of basalt from Hainan Island does not show that lei-gong-mo came from the local volcano. The hypothesis of the lunar volcanic origin of tektites is examined.

Baoyin, Y.↗
NASA NTRS1984

The effects of Cr, Co, Al, Mo and Ta on the cyclic oxidation behavior of a prototype cast Ni-base superalloy based on a 2(5) composite statistically designed experiment

A series of cast Ni-base superalloys were systematically varied at selected levels of Co, Cr, Mo, Ta, and Al. The elemental levels varied were Mo, 0 to 4 percent; Cr, 6 to 18 percent; Co, 0 to 20 percent, Ta, 0 to 8 percent; and Al, 3.25 to 6.25 percent. The cyclic oxidation resistance was determined from specific weight change data as a function of time for 1 hr cycles in static air at 1100 C. The significant terms in decreasing order of their importance were Al, Ta, Cr2, Al-Cr, Cr-Co, Co2, Al-Mo, Cr-Mo, Al-Al, and Mo-Ta. The Al term alone accounted for close to 82 percent of the explained variability. The estimating equation showed that the Al level was the most important and should be at its 6.25 wt % maximum value. The Mo and Ta levels should also be at their maximum 4 and 8 wt % respectively. The cobalt composition should be as low as possible, i.e., 0 wt%. The Cr level optimum varies depending on the other 4 levels. The X-ray diffaction results indicate the most protective scales are alumina/aluminate spinel stabilizized with a tri-rutile oxide high in Ta and Mo.

Barrett, C. A.↗
DOE OSTI2020

Side-reaction products identified for photo-nuclear production of 99 Mo

Production of 99 Mo by the 100 Mo (γ, n) 99 Mo reaction through the bremsstrahlung process using an electron accelerator is one of the feasible options currently pursued by several countries. In this work, we report experimental results on identification of side-reaction products after the irradiation of natural and enriched 100 Mo targets. Side-reaction products identified include various Mo, Nb and Zr isotopes. Comparison of experimentally determined reaction production rates with those determined based on theoretical cross-sections will be presented. Moreover, activation products formed due to presence of impurities introduced during the manufacturing of the Mo targets will also be discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Impacts of annealing treatment on the microstructure of U-Mo monolithic fuel plates

The objective of this paper is to analyze the effect of different heat treatments on the fuel microstructure and texture in laboratory scale monolithic U-Mo fuel plates. Such analyses are relevant as they could possibly inform future fabrication methods for the optimization of microstructure and of material properties to ultimately improve fuel performance during irradiation. For this reason, detail characterization including Energy x-ray dispersive spectroscopy (EDS) and electron backscattered diffraction (EBSD) techniques were applied on U-Mo plates fabricated with different heat treatments to understand the influence of fabrication on fuel microstructure. Here, U-Mo fresh fuel specimens with or without annealing treatments (homogenization and stress release annealing) after rolling were analyzed in this work. In this study for the first time EBSD was systematically used to analyze the heat treatments influence on texture present in fresh fuel monolithic U-Mo fuel plates. Such changes were connected to other known microstructural and chemical changes. In this work minimization of molybdenum concentration variation and gamma phase decomposition of the U-Mo fuel core after homogenization was observed. Also, an increase in the interaction layer of the U-Mo fuel core with the Zr interlayer diffusion barrier was observed with the UZr 2 growing up to 1 µm in thickness. Such microstructural changes were aligned to the changes in texture and grain structure. Indeed, common texture observed in body-centered cubic (BCC) metal after cold rolling (e.g., α, ξ, γ fibers) were minimized by the annealing/homogenization process. Moreover, grain structure was influenced by the fabrication route with elongated grains formed in the rolled sample and equiaxed grains found after annealing. Such features are relevant since the formation of microstructural features formed during fuel fabrication can impact fuel performance in reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Mo 3 S 13 Chalcogel: A High-Capacity Electrode for Conversion-Based Li-Ion Batteries

Despite large theoretical energy densities, metal-sulfide electrodes for energy storage systems face several limitations that impact the practical realization. Here, we present the solution-processable, room temperature (RT) synthesis, local structures, and application of a sulfur-rich Mo 3 S 13 chalcogel as a conversion-based electrode for lithium-sulfide batteries (LiSBs). The structure of the amorphous Mo 3 S 13 chalcogel is derived through operando Raman spectroscopy, synchrotron X-ray pair distribution function (PDF), X-ray absorption near edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) analysis, along with ab initio molecular dynamics (AIMD) simulations. A key feature of the three-dimensional (3D) network is the connection of Mo 3 S 13 units through S–S bonds. Li/Mo 3 S 13 half-cells deliver initial capacity of 1013 mAh g –1 during the first discharge. After the activation cycles, the capacity stabilizes and maintains 312 mAh g –1 at a C/3 rate after 140 cycles, demonstrating sustained performance over subsequent cycling. Such high-capacity and stability are attributed to the high density of (poly)sulfide bonds and the stable Mo–S coordination in Mo 3 S 13 chalcogel. Importantly, these findings showcase the potential of Mo 3 S 13 chalcogels as metal-sulfide electrode materials for LiSBs.

25 ENERGY STORAGE↗
DOE OSTI2026

Quaternary i-MAX Phases (Mo 2/3 RE 1/3 ) 2 AlC (RE: Dy, Tb, Er): Experimental Characterization and First-Principles Insights into their Fundamental Properties

Rare earth (RE)-based materials have unique electronic, magnetic, and optical properties, leading to the recent discovery of atomically layered solids with the chemical formula (M' 2/3 RE 1/3 ) 2 AlC, which have since garnered significant attention in the scientific community. This study aims to synthesize, characterize, and investigate the structural and thermal stability of the RE i-MAX phases. We prepared i-MAX phases using molybdenum (Mo) as M′ and RE elements as Dy, Tb, and Er, namely (Mo 2/3 Dy 1/3 ) 2 AlC, (Mo 2/3 Tb 1/3 ) 2 AlC, and (Mo 2/3 Er 1/3 ) 2 AlC. Structural characterization through x-ray diffraction (XRD) and Raman spectroscopy confirms the formation of the RE-based i-MAX phase, along with the presence of minor impurity phases in the alloys. Thermogravimetric analysis (TGA) conducted up to 1000°C under ambient conditions reveals that the i-MAX phases remain thermally stable up to approximately 450°C, beyond which oxidation leads to a noticeable weight gain in all samples. Differential scanning calorimetry (DSC) measurements during heating and cooling cycles show endothermic and exothermic peaks for (Mo 2/3 Dy 1/3 ) 2 AlC i-MAX in the 410–420°C range, indicating a temperature-induced minor atomic arrangement. In contrast, these peaks are absent in the Tb- and Er-based i-MAX phases. These findings offer valuable insights into the thermal behavior and stability of these i-MAX phases under thermal stress, contributing to a deeper understanding of their unique properties. Furthermore, first-principles density functional theory (DFT) calculations were performed to investigate the electronic and optical properties of the i-MAX phases. The results reveal their metallic nature, with pronounced contributions from Mo and RE elements near the Fermi level and within the conduction band.

Rare earth↗
DOE OSTI2023

Sr 2 Fe 2–X Mo X O 6 double perovskites as electrocatalysts for oxidative dehydrogenation of ethane: Effect of B-site stoichiometry

The oxidative dehydrogenation of ethane (ODHE) was investigated using a solid oxide electrocatalytic cell with Sr 2 Fe 2–X Mo X O 6–δ (SFM) double perovskite as the anode electrocatalyst. As shown in the XRD patterns, SFM perovskites maintained their cubic structure upon modifying the B-site ratios of Mo and Fe. Increasing the Mo content of the perovskite structure resulted in a lower water signal intensity at low temperatures in TPR profiles, indicative of moderate oxygen transport through the perovskite structure. Because Mo–O bonds are stronger than Fe–O bonds, the electrical conductivity of SFM perovskites decreased with increasing Mo content. When operated at 100 mA cm –2 , ODHE activity improved four times compared to open circuit voltage, resulting in 16.1% conversion of C 2 H 6 and 83.1% selectivity to C 2 H 4 . It has been demonstrated that oxygen ions provided by perovskite lattices were the key species involved in activating C 2 H 6 based on the in-situ DRIFTS experiments. In conclusion, the SFM perovskite with higher Mo content showed the highest conversion and selectivity due moderate oxygen ion mobility and fast desorption of C 2 H 4 .

25 ENERGY STORAGE↗