Search NASA⌕ Search

SEARCH · Search NASA

Results for ““Soft” Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Flexible Fabric-Based IDC Sensors for Conformal Curved Surface Applications

Interdigital capacitor (IDC) sensors are attractive in-situ sensors that can be used to measure permittivity variations in materials. Such sensors could be powerful enablers for cable insulation aging detection. Since insulation aging is correlated with a change in its material permittivity an IDC can measure that change via its measured capacitance. A new thin, flexible fabric-based IDC sensor is introduced for application on conformal curved surfaces such as an electrical cable surface. A multielectrode IDC and its backplane were fabricated using conductive copper polyester taffeta fabrics that were adhesively bonded to nonconductive polyester fabric. The sensor because of its soft flexible structure eliminates the problem of sensor conductor damage which is common for printed circuit board (PCB) type sensors when conformed to the surface of a cable. It also significantly reduces the airgap between the electrodes and the surface that they must contact in order to measure the capacitance. Airgap reduction and consistency are important in order to accurately predict permittivity variations in cable insulation material due to aging. Both PCB-based sensors and the new fabric-based sensors were built and tested on unaged cables and cables that underwent accelerated aging. Results demonstrate the proposed advantages of the novel fabric-based IDC sensor.

interdigital capacitor sensor, IDC, NDE, PCB senso↗
DOE OSTI2022

Probing the solidification of quasicrystals via joint experiment and simulation (Final Report)

Quasicrystals (QCs) possess long-range positional order but non-crystallographic orientational order. Their classically ‘forbidden’ symmetry has long attracted the interest of scientists worldwide. Despite their frequent observation in both metal alloys and soft matter structures in the 35 years since their discovery, little is known about how QCs evolve from a liquid, amorphous, or crystalline precursor. In this project, we sought to resolve the enigma of QC self-assembly through a combined experimental and computational program. The Shahani group employed in situ electron and synchrotron X ray imaging to peer into the growth dynamics of QCs in a liquid, covering a broad range of length scales and solidification pathways. Glotzer's team developed new simulation models incorporating phasonic defects — which are unique to quasicrystals — and used this model to investigate two grains growing together, closely mimicking the experimental conditions. While QCs remain exceptional structures, most compounds in the realm of intermetallics adopt non-trivial geometries. In fact, only around 6% of phases are comprised of the simplest sphere packings that researchers so readily associate with metals. State-of-the-art knowledge of phase transformations at the outset of this collaborative project did not encompass the remaining 94% of intermetallic compounds that possess complex and aperiodic structure types. Therefore, we expect that outcomes from this project will have immediate and profound impact on synthesis and processing science: our efforts will be used to not only explain the growth dynamics of QCs but also complex intermetallics more broadly.

36 MATERIALS SCIENCE↗
NASA NTRS1974

Determination of cardiac size from chest roentgenograms following Skylab missions

Decreased cardiothoracic transverse diameter ratios following Mercury, Gemini and Apollo space flights have been reported previously. To evaluate further changes in cardiac size, standard posteroanterior chest films in systole and diastole were obtained before flight and within a few hours after recovery on each of the Skylab astronauts. Postflight chest X-rays were visually compared to the preflight roentgenograms for possible changes in pulmonary vasculature, lung parenchyma, bony or soft tissue structures. From these roentgenograms the following measurements were obtained: cardiac and thoracic transverse diameters, cardiothoracic transverse diameter ratio, cardiac area from the product of both diagonal diameters, cardiac silhouette area by planimetry, thoracic cage area and cardiothoracic area ratio. The postflight frontal cardiac silhouette sizes were significantly decreased when compared with the respective preflight values (P0.05 or 0.01). The observed changes are thought to be related to postflight decrease in the intracardiac chamber volume.

Nicogossian, A. E.↗
NASA NTRS1981

Latitude dependence of solar wind velocity observed at not less than 1 AU

The large-scale solar wind velocity structure in the outer heliosphere has been systematically analyzed for Carrington rotations 1587-1541 (March 1972 to April 1976). Spacecraft data were taken from Imp 7/8 at earth, Pioneer 6, 8, and 9 near 1 AU, and Pioneer 10 and 11 between 1.6 and 5 AU. Using the constant radial velocity solar wind approximation to map all of the velocity data to its high coronal emission heliolongitude, the velocity structure observed at different spacecraft was examined for latitudinal dependence and compared with coronal structure in soft X-rays and H-alpha absorption features. The constant radial velocity approximation usually remains self-consistent in decreasing or constant velocity solar wind out to 5 AU, enabling us to separate radial from latitudinal propagation effects. Several examples of sharp nonmeridional stream boundaries in interplanetary space (about 5 deg latitude in width), often directly associated with features in coronal X-rays and H-alpha were found.

Mitchell, D. G.↗
NASA NTRSDate not supplied

Creep Testing of Vectran Yarn

Presentation detailing the creep testing of Vectran yarn using two different test stands.

Inflatable Structures↗
DOE OSTI2021

Soft magnetic alloy embodiments for additive manufacturing and geometric structures formed therefrom

Disclosed herein are embodiments of soft magnetic alloy embodiments for use in additive manufacturing and structures fabricated from such alloys. In some embodiments, the fabricated structures comprise a continuous thin wall (or plurality thereof) having a geometry that promotes reduced eddy current losses and other performance enhancements. In some embodiments, the fabricated structures are used to make components, such as transformer cores and/or electric motors.

Plotkowski, Alexander↗
DOE OSTI2025

Automated segmentation of soft X-ray tomography: Native cellular structure with submicron resolution at high-throughput for whole-cell quantitative imaging in yeast

Soft X-ray tomography (SXT) is an invaluable tool for quantitatively analyzing cellular structures at suboptical isotropic resolution. However, it has traditionally depended on manual segmentation, limiting its scalability for large datasets. Here, we leverage a deep learning-based autosegmentation pipeline to segment and label cellular structures in hundreds of cells across three Saccharomyces cerevisiae strains. This task-based pipeline uses manual iterative refinement to improve segmentation accuracy for key structures, including the cell body, nucleus, vacuole, and lipid droplets, enabling high-throughput and precise phenotypic analysis. Using this approach, we quantitatively compared the three-dimensional (3D) whole-cell morphometric characteristics of wild-type, VPH1-GFP, and vac14 strains, uncovering detailed strain-specific cell and organelle size and shape variations. We show the utility of SXT data for precise 3D curvature analysis of entire organelles and cells and detection of fine morphological features using surface meshes. Our approach facilitates comparative analyses with high spatial precision and statistical throughput, uncovering subtle morphological features at the single-cell and population level. This workflow significantly enhances our ability to characterize cell anatomy and supports scalable studies on the mesoscale, with applications in investigating cellular architecture, organelle biology, and genetic research across diverse biological contexts.

Chen, Jianhua [Lawrence Berkeley National Laborato↗
NASA NTRS1976

The spatial structure of a solar flare in soft X-rays and centimetric wavelengths

High-resolution images of the decay phase of a soft X-ray flare observed by the S-054 experiment on Skylab are compared with interferometric scans of the radio burst obtained simultaneously at 2.8 cm. The spatial resolution of the radio instrument in one direction, although lower than the X-ray telescope resolution, is high enough for a detailed comparison. The comparison clarifies the relationship between the sources of soft X-ray and thermal radio emission in solar flares. The X-ray emission is localized in a looplike structure which appears spatially coincident with the rapidly varying component of the radio burst. The more stable components of the radio source, which do not appear to contribute substantially to X-ray emission, are found to be spatially associated with the extremes of the X-ray loop. A model of plasma-filled loops is suggested which accounts for the emissions in both spectral ranges and for their spatial location and temporal development.

Pallavicini, R.↗
DOE OSTI2021

Electronic structure of Alq 3 and Liq using soft X-ray spectroscopy and density functional theory calculation

We show the electronic structure of aluminum tris-8-hydroxyquinoline (Alq 3 ) and 8-hydroquinolatolithium (Liq) was investigated using a combination of X-ray emission spectroscopy (XES), X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and spectral simulation with density functional theory. The chemical bonding states of Alq 3 and Liq were analyzed using XPS core-level spectra. The band gaps of Alq 3 and Liq were measured by combining the XAS and XES results. Additionally, resonant and non-resonant XES were used to measure the density of states for O sites in the molecules.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Electron ptychography reveals a ferroelectricity dominated by anion displacements

Sodium niobate, a lead-free ferroic material, hosts delicately balanced, competing order parameters, including ferroelectric states that can be stabilized by epitaxial strain. Here we show that the resulting macroscopic ferroelectricity exhibits an unconventional microscopic structure using multislice electron ptychography. This technique overcomes multiple scattering artefacts limiting conventional electron microscopy, enabling both lateral spatial resolution beyond the diffraction limit and recovery of three-dimensional structural information. These imaging capabilities allow us to separate the ferroelectric interior of the sample from the relaxed surface structure and identify the soft phonon mode and related structural distortions with picometre precision. Unlike conventional ferroelectric perovskites, we find that the polar distortion in this material involves minimal distortions of the cation sublattices and is instead dominated by anion displacements relative to the niobium sublattice. We establish limits on film thickness for interfacial octahedral rotation engineering and directly visualize a random octahedral rotation pattern, arising from the flat dispersion of the associated phonon mode.

ferroelectrics and multiferroics↗
DOE OSTI2020

The soft quark Sudakov

There has been recent interest in understanding the all loop structure of the subleading power soft and collinear limits, with the goal of achieving a systematic resummation of subleading power infrared logarithms. Most of this work has focused on subleading power corrections to soft gluon emission, whose form is strongly constrained by symmetries. In this paper we initiate a study of the all loop structure of soft fermion emission. In N = 1 QCD we perform an operator based factorization and resummation of the associated infrared logarithms using the formalism introduced in, and prove that they exponentiate into a Sudakov due to their relation to soft gluon emission. We verify this result through explicit calculation to O($α$ $^{3}_{s}$). We show that in QCD, this simple Sudakov exponentiation is violated by endpoint contributions proportional to (C A –C F ) n which contribute at leading logarithmic order. Combining our N = 1 result and our calculation of the endpoint contributions to O($α$ $^{3}_{s}$), we conjecture a result for the soft quark Sudakov in QCD, a new all orders function first appearing at subleading power, and give evidence for its universality. Our result, which is expressed in terms of combinations of cusp anomalous dimensions in different color representations, takes an intriguingly simple form and also exhibits interesting similarities to results for large-x logarithms in the off diagonal splitting functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Interfacial Assembly and Jamming of Soft Nanoparticle Surfactants into Colloidosomes and Structured Liquids

Nanoparticle surfactant (NPS) offers a powerful strategy to generate all-liquid constructs that integrate the inherent properties of the NPs into 3D architectures. In this report using the co-assembly of fluorescent polymeric nanoparticles and amine-functionalized polyhedral oligomeric silsesquioxane, the assembly and jamming behavior of a new type of NPS at the oil-water interface is uncovered. Unlike "solid" inorganic nanoparticles, "soft" polymeric nanoparticles can reorganize when jammed, leading to a relaxation and deformation of the interfacial assemblies, for example, the 3D printed sugar-coated haw stick-like liquid tubules. With NPS serving as emulsifiers, stable Pickering emulsions are prepared that can be converted into robust colloidosomes with pH responsiveness, showing numerous potential applications for encapsulation and controlled release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Apex hydrogen bonds in dendron assemblies modulate close-packed mesocrystal structures

The close-packed mesocrystal structures from soft-matter assemblies have recently received attention due to their structural similarity to atomic crystals, displaying various sphere-packing Frank–Kasper (FK) and quasicrystal structures. Herein, diverse mesocrystal structures are explored in second-generation dendrons (G2-X) designed with identical wedges, in which the terminal functionalities X = CONH 2 and CH 2 NH 2 represent two levels of the strong and weak hydrogen-bonding apexes, respectively. The cohesive interactions at the core apex, referred to as the core interactions, are effectively modulated by forming heterogeneous hydrogen bonds between these two functional units. For the dendron assemblies compositionally close to each pure component of G2-CONH 2 and G2-CH 2 NH 2 , their own FK A15 and C14 phases dominate other phases, respectively. We show the existence of the wide-range FK σ including the dodecagonal quasicrystal (DDQC) phases from the dendron mixtures between G2-CONH 2 and G2-CH 2 NH 2 , providing an experimental phase sequence of A15–σ–DDQC–C14 as the core interactions are alleviated. Intriguingly, the temperature dependence of particle sizes shows that the high plateau values of particle sizes are maintained equivalently until each threshold temperature (T th ), followed by a prompt decrease above the T th . A decrease in T th by alleviating the core interactions and its composition dependence suggest that the more size-dispersed particles, the more susceptibility to chain exchange with increasing temperature. Here our results on the formation of supramolecular dendron assemblies provide a guide to understand the core-interaction-dependent mesocrystal structures toward the fundamental principle underlying the temperature dependence of their particle sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Role of scan strategies and heat treatment on grain structure evolution in Fe-Si soft magnetic alloys made by laser-powder bed fusion

A major goal in printing soft magnetic Fe-Si steels using additive manufacturing is to take advantage of the potential for complex geometric designs and site-specific grain control. One major step in the processing of these alloys is understanding how processing parameters might impact how the as-built microstructure responds to annealing (i.e. the annealing response). The impact of scan strategy on the annealing response for thin wall geometries is specifically explored. Two scan strategies were explored for a thin wall geometry that produced a strongly columnar grain structure and equiaxed grain structure. Additionally, samples from both scan strategies annealed at 1200 °C showed a marked difference in annealing response with the more equiaxed sample seeing full recrystallization and grain growth, while the more columnar grain structure saw little change in microstructure. After analysis through characterization techniques and thermal-mechanical simulations Differences in internal energy within the grains were ruled out because calculated GND density values were similar for both samples. The formation of secondary particles was ruled out as a contributing factor due to the type of oxide formations and their size. It was concluded that the contributing factor to the difference in the annealing response were a difference in the resulting grain size and the density of high angle grain boundaries. These two differences were largely attributed to differences in the thermal gradient conditions due to grains preferentially growing in the direction of the steepest thermal gradient.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural and Spectroscopic Comparison of Soft-Se vs. Hard-O Donor Bonding in Trivalent Americium/Neodymium Molecules

Covalency is often considered to be an influential factor in driving An 3+ vs. Ln 3+ selectivity invoked by soft donor ligands. This is intensely debated, particularly the extent to which An 3+ /Ln 3+ covalency differences prevail and manifest as the f-block is traversed, and the effects of periodic breaks beyond Pu. In this work, two Am complexes, [Am{N(E=PPh 2 ) 2 } 3 ] ( 1-Am , E=Se; 2-Am , E=O) are compared to isoradial [Nd{N(E=PPh 2 ) 2 } 3 ] ( 1-Nd , 2-Nd ) complexes. Covalent contributions are assessed and compared to U/La and Pu/Ce analogues. Through ab initio calculations grounded in UV-vis-NIR spectroscopy and single-crystal X-ray structures, we observe differences in f orbital involvement between Am–Se and Nd–Se bonds, which are not present in O-donor congeners.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Soft X-Ray Tomography Has Evolved into a Powerful Tool for Revealing Cell Structures

Over the past three decades, soft X-ray tomography (SXT) has rapidly evolved from a proof-of-concept microscopy method into a high-throughput quantitative imaging modality. This advancement enables researchers to address central questions in cell biology. Despite its relatively short developmental period compared to light and electron microscopy, SXT has emerged as a powerful imaging technology. It enables measuring chemical changes in cellular organelles, analyzing three-dimensional structures of whole cells and creating digital cellular models to study cell motility. We discuss the unique nature of SXT to visualize cells without fixation or labeling, enabling quantitative analyses of organelle chemical composition. We explore SXT microscopes available worldwide, SXT segmentation software, and the diverse cell types studied using this technique. We conclude with emerging directions in SXT imaging, including a brief discussion of recent discoveries that are highly influential and likely to become integral to cell biology textbooks.

Weinhardt, Venera↗