Search NASA⌕ Search

SEARCH · Search NASA

Results for “16A”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 5: Utah FORGE Well 16B(78)-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 4: Utah FORGE Well 78B-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 3: Utah FORGE Well 56-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Utah FORGE CoreFlooding Experimental Results

This submission contains associated data from 100C and 200C core-flooding experiments conducted by Lawrence Livermore National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of these tests were to determine the change in calculated hydraulic fracture and permeability over time, under constant confining pressure, in predominantly constant flowrate conditions, while monitoring effluent chemistry as a function of time.

15 GEOTHERMAL ENERGY↗
NASA NTRS1975

Meteoritic trace elements in lunar rock 14321, 184

Measurements are given for sixteen trace elements determined by radiochemical neutron activation analysis in six samples of four components of lunar rock 14321, 184. The samples were of basalt (1B), matrix (9A), microbreccia-2 (15), and microbreccia-3 (14A, 16A, and 19A) components. The ancient meteoritic components in the samples were determined according to the ratios of siderophile elements (Ir/Au and Ge/Au) found in the samples.

Morgan, J. W.↗
NASA NTRS1981

A systematic program of cometary spectroscopy

Some early results of a systematic program of observing the spectroscopic behavior of comets as a function of heliocentric distance are presented. An ultraviolet sensitive microchannel plate intensifier spectrograph was used to record the 3000-5000A spectrum of comets brighter than magnitude 17 with a spectral resolution of 8 or 16A, followed by direct image for better interpretation of the spatial distribution of spectral features. Although the goals of the program require much more time and data, some interesting results from Comets Schwassmann-Wachmann, 1, Bradfield and Bowell were obtained.

Larson, S. M.↗
NASA NTRS1981

Reactivity of pyrylium salts toward basic reactants

The reactivity of some N-acyl and N-sulfonyl-hydrazines 2-4, 10a-10g, 12, 13, 16a, 16b and of hydrazones 18, benzyldihydrazone 21 towards pyrylium salts 1 was examined. By reaction of 2,4,6-trimethyl-pyrylium salt 1 with substituted hydrazines some pyridinium salts were obtained. Relationships between basicity and reactivity were discussed.

Neidlein, R.↗
NASA NTRS1982

Supersonic STOVL research aircraft

Two powered-lift concepts, the tandem fan and the longitudinally-arrayed ejector, are integrated with two existing fighter aircraft, the F-14A and F-16A respectively, to indicate the benefits and/or penalties involved with providing STOVL capability to CTOL aircraft. It is shown that properly designed powered-lift aircraft can achieve either comparable or superior mission performance relative to CTOL aircraft.

Wilson, S. B., III↗
NASA NTRS1984

A preliminary analysis of flight data from the AFTI/F-16 airplane

Flight test data from the AFTI/F-16 airplane are analyzed. Two flight control system modes (Independent Backup Unit and Standard Normal Mode) are considered. Estimated stability and control derivatives are compared with values from the wind tunnel and F-16A flight tests. Modeling difficulties are shown to arise due to the near-neutral static stability of the airplane and the number of coordinated control surface movements commanded in the Standard Normal Mode.

Batterson, J. G.↗
NASA NTRS1986

Application of the TranAir full-potential code to complete configurations

The TranAir computer code solves the full-potential equation for transonic flow by combining a rectangular box of flow-field grid points with networks of surface panels. Complex geometry is easily represented since surface conforming flow-field grids are not used. Application of TranAir to the F-16A is presented for free-stream Mach numbers of 0.6 and 0.90, at an angle of attack of four degrees.

Erickson, L. L.↗
NASA NTRS1987

Strake-generated vortex interactions for a fighter-like configuration

A combination of the Euler, and thin-layer Navier-Stokes equations were solved for the flowfield around a wing-strake-fuselage configuration similar to the F-16A aircraft. The flowfield was divided into multiple blocks using a zoning program, and the TNSWF solution program, based on an implicit solution algorithm, updates each subregion of the flowfield sequentially. The total grid contained approximately 300,000 grid points, and clustering was effected normal to all aircraft surfaces. The computed solutions agreed well quantitatively with wind-tunnel pressure distribution data, and they agreed well qualitatively with flow visualization from wind- and water-tunnel tests.

Reznick, Steven G.↗
NASA NTRS1987

Transonic Navier-Stokes solutions for a fighter-like configuration

The Transonic Navier-Stokes wing code is extended to a 16-zone TNS wing-fuselage code and used to solve the transonic viscous flow over a modified F-16A. The computer code, called Transonic Navier-Stokes Wing/Fuselage uses a zonal approach to solve the three-dimensional Euler and Navier-Stokes equations. With the zonal implementation, clustering suitable for viscous calculations is achieved on all solid surfaces. The transonic case has flow conditions of free-stream M = 0.9, alpha = 4.12 deg, and a Reynolds number based on root chord of 4.5 million. This case required about 3,000 iterations to reduce the L2-norm of the residual by three orders, which takes about 15 hr of cpu time on the Cray X-MP/48 processor. Pressure distributions, as well as separaton patterns, compare favorably with experiment for this transonic case.

Flores, Jolen↗
NASA NTRS1987

Simulation of transonic viscous flow over a fighter-like configuration including inlet

The simulation of transonic viscous flow over a modified F-16A including inlet is presented. A zonal approach is utilized which allows appropriate clustering suitable for viscous calculations on all solid surfaces. Computational efficiency is enhanced by solving the thin-layer Navier-Stokes equations in viscous zones adjacent to the aircraft and the Euler equations on those coarse zones away from the aircraft. The flow conditions for this transonic case are freestream Mach number of 0.9, angle of attack of 4.12 deg, and a Reynolds number (based on root chord) of 4.5 million. A total of 19 zones are utilized yielding a total of 350,000 grid points. This case required about 3000 iterations to reduce the residual by three orders, which takes about 10 hr of CPU time on the Cray X-MP/48 computer. Pressure distributions on the wing and on cross sections through the inlet region compare favorably with the experimental data for this transonic case.

Flores, Jolen↗
NASA NTRS1988

Applications of the Navier-Stokes equations to wings and complex configurations using a zonal approach

The simulation of a transonic viscous flow over a series of 3-D configurations, ranging from isolated wings to relatively complete aircraft, is presented. A fast, diagonalized Beam-Warming algorithm is used in conjunction with a zonal approach to solve the Euler/Navier-Stokes equations for these applications. The computer code, called Transonic Navier-Stokes, uses four zones for wing configurations and up to 19 zones for more complete aircraft configurations. For the inner zones adjacent to no-slip surfaces, the thin-layer Navier-Stokes equations are solved, while in the outer zones the Euler equations are solved. Numerical results are presented and compared with experiment (when available) for wing calculations and a more complete configuration based on the F-16A aircraft.

Flores, Jolen↗
NASA NTRS1989

Aerodynamic analysis of three advanced configurations using the TranAir full-potential code

Computational results are presented for three advanced configurations: the F-16A with wing tip missiles and under wing fuel tanks, the Oblique Wing Research Aircraft, and an Advanced Turboprop research model. These results were generated by the latest version of the TranAir full potential code, which solves for transonic flow over complex configurations. TranAir embeds a surface paneled geometry definition in a uniform rectangular flow field grid, thus avoiding the use of surface conforming grids, and decoupling the grid generation process from the definition of the configuration. The new version of the code locally refines the uniform grid near the surface of the geometry, based on local panel size and/or user input. This method distributes the flow field grid points much more efficiently than the previous version of the code, which solved for a grid that was uniform everywhere in the flow field. TranAir results are presented for the three configurations and are compared with wind tunnel data.

Madson, M. D.↗
NASA NTRS1991

Transonic Flows About A Fighter Airplane

Report describes computational study of transonic flows about airplane having shape similar to F-16A fighter. Navier-Stokes calculations simulate complicated flow fields and interactions.

Reznick, Steve↗
NASA NTRS1991

Navier-Stokes Computations On Zonal Grids

Report describes numerical simulations of transonic flow of air about isolated wing and about wing and fuselage (not tail assembly) of F-16A aircraft. Fast, diagonalized Beam-Warming numerical-integration algorithm for solution of Euler and Navier-Stokes equations applied via Transonic Navier-Stokes computer program, using computational grids divided into zones of coarse and finer meshes.

Flores, Jolen↗
NASA NTRS1990

Toward the routine aerodynamic analysis of complex configurations

An evaluation is made of the ability of the TranAir CFD code to routinely compute the aerodynamic characteristics of complex subsonic and supersonic aircraft configurations. TranAir solves the full-potential equation for transonic flow about completely arbitrary geometries, using the surface-paneling PanAir technique in geometry definition. The uniform global grid may be locally refined in regions where flow properties are rapidly changing, such as regions where shocks arise, and around wing leading edges. Unlike panel method codes, TranAir solutions are not undermined by small-perturbation assumptions. Illustrative results are presented for such configurations as the F-16A with wingtip-mounted missiles and underwing fuel tanks, a generic fighter configuration, and a model of NASA-Ames' 12-ft Pressure Wind Tunnel.

Madson, Michael D.↗