Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

A coevolution-guided model for the rotor of the bacterial flagellar motor

The Salmonella typhimurium trans-membrane FliF MS ring templates assembly of the rotary bacterial fagellar motor, which also contains a cytoplasmic C-ring. A full-frame fusion of FliF with the rotor protein FliG assembles rings in non-motile expression hosts. 3D electron microscopy reconstructions of these FliFFliG rings show three high electron-density sub-volumes. 3D-classifcation revealed heterogeneity of the assigned cytoplasmic volume consistent with FliG lability. We used residue coevolution to construct homodimer building blocks for ring assembly, with X-ray crystal structures from other species and injectisome analogs. The coevolution signal validates folds and, importantly, indicates strong homodimer contacts for three ring building motifs (RBMs), initially identified in injectisome structures. It also indicates that the cofolded domains of the FliG N-terminal domain (FliG_N) with embedded α-helical FliF carboxy-terminal tail homo-oligomerize. The FliG middle and C-terminal domains (FliG_MC) have a weak signal for homo-dimerization but have coevolved to conserve their stacking contact. The homodimers and their ring models ft well into the 3D reconstruction. We hypothesize that a stable FliF periplasmic hub provides a platform for FliG ring self-assembly, but the FliG_MC ring has only limited stability without the C-ring. We also present a mechanical model for torque transmission in the FliFFliG ring.

59 BASIC BIOLOGICAL SCIENCES↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 4a Raw Data

Calculated formation energy of (0001 ̅) c-plane GaN surfaces. The density-functional theory (DFT) calculations were performed with the generalized gradient approximation, using the plane-wave pseudopotential quantum-ESPRESSO package. Ultrasoft pseudopotentials were used to describe the interaction between valence electrons and ionic cores, where Ga 3d electrons were explicitly treated as valence electrons. The wave functions and electronic density were expanded in a plane-wave basis set truncated at a cutoff energy of 30 Ry and 240 Ry, respectively. The surface was modeled using a repeated slab geometry using a (2×2) unit cell with a thickness of seven GaN bilayers, where the Ga-terminated bottom side was passivated by pseudo-hydrogen with charge of 1.25e. In addition, the (1010) surface was modeled using 8 GaN atomic layers with a lateral dimension of 9.57 Å x 10.38 Å. A vacuum width of at least 15.0 Å was introduced between consecutive slabs, and a k-point mesh of 5x5x1 and 2x2x1 was used to sample the surface Brillouin zone for the polar and non-polar surfaces, respectively. Calculated formation energy of (0001 ̅) c-plane GaN surfaces with different oxygen configuration within the anion and cation-rich limits: ideal GaN surfaces of c-plane and m-plane; configurations with 100% replacement of nitrogen by oxygen on the surface c-plane and m-plane; 100% replacement of nitrogen by oxygen in the subsurface bilayer c-plane and m-plane; and configurations with 50% replacement of nitrogen of the surface and subsurface bilayers by oxygens c-plane and m-plane. In both cases, the ideal surface is chosen as the reference.

photocathode↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 4b Raw Data

Calculated formation energy of (1010 ̅) m-plane GaN surfaces. The density-functional theory (DFT) calculations were performed with the generalized gradient approximation, using the plane-wave pseudopotential quantum-ESPRESSO package. Ultrasoft pseudopotentials were used to describe the interaction between valence electrons and ionic cores, where Ga 3d electrons were explicitly treated as valence electrons. The wave functions and electronic density were expanded in a plane-wave basis set truncated at a cutoff energy of 30 Ry and 240 Ry, respectively. The surface was modeled using a repeated slab geometry using a (2×2) unit cell with a thickness of seven GaN bilayers, where the Ga-terminated bottom side was passivated by pseudo-hydrogen with charge of 1.25e. In addition, the (1010) surface was modeled using 8 GaN atomic layers with a lateral dimension of 9.57 Å x 10.38 Å. A vacuum width of at least 15.0 Å was introduced between consecutive slabs, and a k-point mesh of 5x5x1 and 2x2x1 was used to sample the surface Brillouin zone for the polar and non-polar surfaces, respectively. Calculated formation energy of (1010 ̅) m-plane GaN surfaces with different oxygen configuration within the anion and cation-rich limits: ideal GaN surfaces of c-plane and m-plane; configurations with 100% replacement of nitrogen by oxygen on the surface c-plane and m-plane; 100% replacement of nitrogen by oxygen in the subsurface bilayer c-plane and m-plane; and configurations with 50% replacement of nitrogen of the surface and subsurface bilayers by oxygens c-plane and m-plane. In both cases, the ideal surface is chosen as the reference.

photocathode↗

Estimation of the Magnetic Electron-Density Distribution by RXMS at the Electronic Transition in Absorption Edge

Electron-density analysis has been developed to make use of the intensity difference in the resonant X-ray magnetic scattering (RXMS) between left- and right-circular polarizations. The magnetic electron density was obtained at the electronic transition energy, E = 7.1082 keV in the Fe K pre-edge by using the difference-Fourier synthesis. Difference peaks due to magnetic electrons of Fe{sub 3}O{sub 4} appeared in the difference-Fourier maps, where Fe ions in the B site have a pair of positive peaks of 0.36 e/A{sup 3} in height at a distance of 0.63 A from the center. The magnetic electron densities are caused by magnetic unpaired 3d electrons in the FeO{sub 6} octahedron, where the pre-edge peak is prohibited by the selection rule in the dipole transition with the O{sub h} symmetry. Thus, it has led to the contribution from the quadrupole transition or the hybridization related to the A-O-B superexchange interaction among neighboring ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large magnetic entropy change and adiabatic temperature rise of a Gd{sub 55}Al{sub 20}Co{sub 20}Ni{sub 5} bulk metallic glass

Gd{sub 55}Al{sub 20}Co{sub 20}Ni{sub 5} bulk metallic glass (BMG) was synthesized by minor Ni substitution for Co in the Gd{sub 55}Al{sub 20}Co{sub 25} BMG in which excellent glass forming ability (GFA) and magneto-caloric effect were reported previously. The Gd{sub 55}Al{sub 20}Ni{sub 20}Co{sub 5} amorphous rod has a similar GFA to the Gd{sub 55}Al{sub 20}Co{sub 25} BMG but exhibits better magnetic properties. The peak value of magnetic entropy change (−ΔS{sub m}{sup peak}) of the Gd{sub 55}Al{sub 20}Co{sub 20}Ni{sub 5} BMG is 9.8 Jkg{sup −1} K{sup −1}. The field dependence of −ΔS{sub m}{sup peak} follows a −ΔS{sub m}{sup peak}∝H{sup 0.85} relationship. The adiabatic temperature rise of the rod is 4.74 K under 5 T and is larger than of other BMGs previously reported. The improved magnetic properties were supposed to be induced by the enhanced interaction between 4f electron in the rare-earth and 3d electron in the transition metal elements by means of a minor Ni substitution for Co.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative-ion resonances in zinc: A study in elastic electron scattering and electron transmission

The energies, widths, and angular behavior of negative-ion resonances in zinc atoms are determined using the complementary experimental techniques of electron transmission and angular differential elastic scattering. The observed resonances include states formed by the excitation of an inner 3d electron and assigned to a 3d{sup 9}4s{sup 2}nl{sup 2} electron configuration, l=1 for n=4 and l=0,1 for n=5. The differential elastic scattering indicates that all negative ions in the 3d{sup 9}4s{sup 2}4p{sup 2} manifold are formed from, and decay by, emission of a d-wave electron.

74 ATOMIC AND MOLECULAR PHYSICS↗

Large Charge‐Transfer Energy in LiFePO 4 Revealed by Full‐Multiplet Calculation for the Fe L 3 ‐edge Soft X‐ray Emission Spectra

Abstract We analyzed the Fe 3d electronic structure in LiFePO 4 /FePO 4 (LFP/FP) nanowire with a high cyclability by using soft X‐ray emission spectroscopy (XES) combined with configuration‐interaction full‐multiplet (CIFM) calculation. The ex situ Fe L 2,3 ‐edge resonant XES (RXES) spectra for LFP and FP are ascribed to oxidation states of Fe 2+ and Fe 3+ , respectively. CIFM calculations for Fe 2+ and Fe 3+ states reproduced the Fe L 3 RXES spectra for LFP and FP, respectively. In the calculations for both states, the charge‐transfer energy was considerably larger than those for typical iron oxides, indicating very little electron transfer from the O 2p to Fe 3d orbitals and a weak hybridization on the Fe−O bond during the charge–discharge reactions.

Asakura, Daisuke↗

Localized high spin states in transition-metal dimers: X-ray absorption spectroscopy study

X-ray absorption spectroscopy provides direct evidence for localized valence electrons in Cr{sub 2}{sup +}, Mn{sub 2}{sup +}, and CrMn{sup +} dimer cations. Bonding in these transition-metal molecules is predominantly mediated by 4s electrons. This behavior is markedly different from other 3d transition-metal dimers with open 3d subshells and can be ascribed to the highly stable 3d{sup 5}({sup 6}S) configuration of the 3d subshell in chromium and manganese atoms and ions. In Cr{sub 2}{sup +}, Mn{sub 2}{sup +}, and CrMn{sup +}, 3d electron localization indicates local high spin states.

74 ATOMIC AND MOLECULAR PHYSICS↗

Investigating Sintering Mechanisms for Additive Manufacturing of Conductive Traces

Additive Manufacturing (AM) processes enable the fabrication of miniaturized and flexible devices on complex geometries. This paper explores a hybrid additive manufacturing technology that integrates micro-extrusion and PICO-jetting methods. Conductive slurries and colloidal inks were optimized for their rheological properties to aid their precise deposition. A variety of conductive materials which include carbon, silver, nano-particle silver and nickel were deposited on both rigid (glass) and flexible (Kapton) substrates. The deposited traces were cured using two sintering mechanisms which include furnace heating and in situ laser irradiation. The effect of curing mechanism on the conductance of deposited traces was evaluated. The results indicated that traces could be cured successfully with the laser curing mechanism. Nickel and silver laser cured traces had lower resistivity than the furnace sintered traces. An increase in the laser power resulted in lower resistivity of the traces. The lowest resistivity was achieved at 40W laser power with a single laser pass. Scanning electron microscopy and energy dispersive spectroscopy were used to characterize the trace morphology and elemental compositions. Higher power laser curing resulted in better bonding of the particles. Laser cured samples had minimal oxidation to the cross-section region of the traces as compared to furnace cured samples. Furthermore, this research lays the foundation for the fabrication of electronic components for a high level of freeform 3D electronics using a hybrid additive manufacturing technology.

42 ENGINEERING↗

Stopping power for a charged particle moving through three-dimensional nonideal finite-temperature electron gases

We investigate the interaction of a charged particle with nonideal 3D electron gases by using the quantum hydrodynamic (QHD) theory. The stopping power for a nonideal electron gas at a finite-temperature has been theoretically analyzed and numerically calculated. In our calculation, the impact of nonideality and temperature on stopping power is stressed and clearly presented. The QHD dielectric function is obtained and compared to random-phase approximation result. It is shown that the QHD theory can properly describe the stopping power for higher particle velocities greater than the Bohr velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of V{sub Zn}/V{sub O} on Stability, Magnetism, and Electronic Characteristic of Oxygen Ions for Li-Doped ZnO

The effects of Zn/O vacancy (V{sub Zn}/V{sub O}) and different proportions of Li/V{sub Zn} on the magnetism of Li-doped ZnO are analyzed through first-principle calculation by using generalized gradient approximation+ U (GGA + U) under density functional theory. Results reveal that Li-doped ZnO with V{sub Zn} can realize ferromagnetic long-range order and has a Curie temperature above room temperature. Under different proportions of Li/V{sub Zn} (i.e., 1:1, 1:2, and 2:2) in ZnO (2 × 2 × 4), the doping system containing 2Li/2V{sub Zn} (Zn{sub 28}Li{sub 2}O{sub 32}) shows the greatest magnetic moment and the smallest differential charge density. These characteristics pave the way for enhancing the magnetic properties of dilute magnetic semiconductors. The oxygen atoms in Zn{sub 28}Li{sub 2}O{sub 32} show acceptor and donor characteristics and exist in the forms of itinerant electrons (O{sup 1−}) and local electrons (O{sup 2−}), which have different effects on Zn{sub 28}Li{sub 2}O{sub 32} magnetism. The spin-polarization double-exchange effect among the unpaired itinerant electron (O{sup 1−}) orbit, local electron (O{sup 2−}) orbit, and unpaired Zn-3d electron orbit is the origin of magnetism for Li-doped ZnO with V{sub Zn}. By contrast, the doping systems of Li-doped ZnO with V{sub O} are nonmagnetic, rendering such systems inapplicable.

36 MATERIALS SCIENCE↗

Thermoelectric power of Gd{sub 4}(Co{sub 1-x}Cu{sub x}){sub 3} compounds

We report results of thermoelectric power measurements (S(T)) in ferrimagnetic Gd{sub 4}(Co{sub 1-x}Cu{sub x}){sub 3} compounds with x = 0.05, 0.1, 0.2, and 0.3, in the temperature range 8-300 K. Whereas in Gd{sub 4}Co{sub 3} S(T) is always negative, for x > 0 the substitution of Co for Cu gives rise to the appearance of a low temperature positive maximum in S(T) at around 30 K. Based on our previous study of these compounds, we argue that this maximum in S(T) originates from electron-magnon scattering and is sensitive to electron band structure changes resulting from the substitution of Co for Cu and the accompanying reduction in the ratio between the electron-magnon and the electron-phonon scattering strengths. The decreasing role of Co 3d electrons with the progressive substitution of Co for Cu, evidenced by a strong reduction in the spin disorder resistivity and the Co magnetic moment, is seen to be crucial for the existence of such a low temperature maximum in S(T) for x > 0.

36 MATERIALS SCIENCE↗

Thermoelectric transport properties of polycrystalline titanium diselenide co-intercalated with nickel and titanium using spark plasma sintering

Polycrystalline samples of nickel intercalated (0-5%) TiSe{sub 2} were attempted via solid-state reaction in evacuated quartz tubes followed by densification using a spark plasma sintering process. X-ray diffraction data indicated that mixed NiSe{sub 2} and TiSe{sub 2} phases were present after initial synthesis by solid-state reaction, but a pure TiSe{sub 2} phase was present after the spark plasma sintering. While EPMA data reveals the stoichiometry to be near 1:1.8 (Ti:Se) for all samples, comparisons of the measured bulk densities to the theoretical densities suggest that the off stoichiometry is a result of the co-intercalation of both Ni and Ti rather than Se vacancies. Due to the presence of excess Ti (0.085-0.130 per formula) in the van der Waals gap of all the samples, the sensitive electron-hole balance is offset by the additional Ti-3d electrons, leading to an increase in the thermopower (n-type) over pristine, stoichiometric TiSe{sub 2}. The effects of the co-intercalation of both Ni and Ti in TiSe{sub 2} on the structural, thermal, and electrical properties are discussed herein. - Graphical abstract: Co-intercalation of nickel and excess titanium into the van der Waals gap of TiSe{sub 2} via solid state synthesis followed by spark plasma sintering results in a systematic shift in the ratio of hole and electron carrier concentration, which is close to unity for pristine TiSe{sub 2}. This directly affects the electrical transport properties, and as the structural disorder induced by intercalation suppresses the lattice thermal conductivity, co-intercalation is an effective route to enhance the thermoelectric properties of transition metal diselenides. Highlights: Black-Right-Pointing-Pointer Single phase bulk Ni and Ti co-intercalated TiSe{sub 2} samples prepared by spark plasma sintering. Black-Right-Pointing-Pointer Density and X-ray diffraction suggest that the Ni and excess Ti are ordered in the Van der Waals gap. Black-Right-Pointing-Pointer Co-intercalation of Ni and Ti can be used to control electron-hole ratio and structural disorder.

36 MATERIALS SCIENCE↗

Dual nature of 3 d electrons in YbT 2 Zn 20 (T = Co; Fe) evidenced by electron spin resonance

The electron spin resonance experiments were carried out in the single crystals YbFe 2 Zn 20 . The observed spin dynamics is compared with that in YbCo 2 Zn 20 and Yb 2 Co 12 P 7 as well as with the data of inelastic neutron scattering and electronic band structure calculations. Our results provide direct evidence that 3d electrons are itinerant in YbFe 2 Zn 20 and localized in YbCo 2 Zn 20 . Possible connection between spin paramagnetism of dense heavy fermion systems, quantum criticality effects, and ESR spectra is discussed.

36 MATERIALS SCIENCE↗

Slater-Pauling behavior within quaternary intermetallic borides of the Ti{sub 3}Co{sub 5}B{sub 2} structure-type

First-principles, density-functional studies of several intermetallic borides of the general type M{sub 2}M'Ru{sub 5-n}Rh{sub n}B{sub 2} (n=0-5; M=Sc, Ti, Nb; M'=Fe, Co) show that the variation in saturation magnetic moment with valence-electron count follows a Slater-Pauling curve, with a maximum moment occurring typically at 66 valence electrons. The magnetic moments in these compounds occur primarily from the 3d electrons of the magnetically active M' sites, with some contribution from the Ru/Rh sites via magnetic polarization. Electronic DOS curves reveal that a rigid-band approach is a reasonable approximation for the estimation of saturation moments and the analysis of orbital interactions in this family of complex borides. COHP analyses of the M'-M' orbital interactions indicate optimized interactions in the minority spin states for Co-containing phases, but strong bonding interactions remaining in Fe-containing phases. - Graphical abstract: Theoretically determined (spin-polarized LMTO-GGA) local magnetic moments as a function of the chemical valence Z for various intermetallic borides.

36 MATERIALS SCIENCE↗

Structure of isolated biomolecules obtained from ultrashort x-ray pulses: exploiting the symmetry of random orientations

mongst the promised capabilities of fourth-generation x-ray sources currently under construction is the ability to record diffraction patterns from individual biological molecules. One version of such an experiment would involve directing a stream of molecules into the x-ray beam and sequentially recording the scattering from each molecule of a short, but intense, pulse of radiation. The pulses are sufficiently short that the diffraction pattern is that due to scattering from identical molecules frozen gorithms have been proposed for finding the relative orientations from just the measured diffraction data. The common-line method, also employed in 3D electron microscopy, appears not best suited to the very low mean photon count per diffraction pattern pixel expected in such experiments. A manifold embedding technique has been used to reconstruct the 3D diffraction volume and hence the electron density of a small protein at the signal level expected of the scattering of an x-ray free electron laser pulse from a 500 kD biomolecule. In this paper, we propose an alternative algorithm which raises the possibility of reconstructing the 3D diffraction volume of a molecule without determining the relative orientations of the individual diffraction patterns. We discuss why such an algorithm may provide a practical and computationally convenient method of extracting information from very weak diffraction patterns. We suggest also how such a method may be adapted to the problem of finding the variations of a structure with time in a time-resolved pump probe experiment.

36 MATERIALS SCIENCE↗

Three-Dimensional Momentum Imaging of Electron Wave Packet Interference in Few-Cycle Laser Pulses

Using a reaction microscope, three-dimensional (3D) electron (and ion) momentum (P) spectra have been recorded for carrier-envelope-phase (CEP) stabilized few-cycle (approx5 fs), intense (approx4x10{sup 14} W/cm{sup 2}) laser pulses (740 nm) impinging on He. Preferential emission of low-energy electrons (E{sub e}<15 eV) to either hemisphere is observed as a function of the CEP. Clear interference patterns emerge in P space at CEPs with maximum asymmetry, interpreted as attosecond interferences of rescattered and directly emitted electron wave packets by means of a simple model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗