Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACETAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Acetate-based water-in-salt electrolytes (WiSE) for improved zinc battery cycling [Poster]

Grid scale batteries need to be inexpensive to manufacture, safe to operate, and non-toxic in composition. Zinc aqueous (alkaline) batteries hold much promise, but good cycle life and utilization of the zinc has proven difficult partly because zinc is susceptible to H 2 gas evolution in KOH. Water-insalt electrolyte (WiSE) can address this shortcoming by lowering the activity of free water molecules in solution, thus reducing H 2 gas evolution. In this work, we show the relevant fundamental physicochemical properties of an acetate-based WiSE to establish the practicality and performance of this class of WiSE for battery application. Research and understanding of acetate WiSE is in a nascent state, presently.

25 ENERGY STORAGE↗
DOE OSTI2021

Species Extrapolation of Propyl Acetate Dose Metrics

We demonstrate the ability of the propyl PBPK model to predict dose metrics of propyl acetate, propanol, and propionic acid from a standard 90-day subchronic inhalation study of propyl acetate in male and female rats. The model was used to predict the same dose metrics in “reference” male and female humans using the same exposure conditions. Finally, we used reverse dosimetry with the model to predict what exposure conditions would lead to the same dose metrics measured in rats. These extrapolations of internal dose metrics based on known species differences in physiology and measured differences in metabolism offer a more scientific species extrapolation than conventional uncertainty approaches, potentially of interest for risk assessment.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2022

Assessing the Role of the Support in Acetic Acid Hydrodeoxygenation Selectivity on Pt/TiO2

To produce drop-in quality biofuels following the thermochemical conversion of biomass via catalytic fast pyrolysis (CFP), hydrodeoxygenation (HDO) reactions can be performed to remove excess oxygen and create a more stable bio-oil product. HDO reactions involve co-feeding the CFP vapor-phase product and H2 gas over bi-functional catalysts, such as noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2). Recent model-compound studies, focusing on important classes of species in the CFP vapor mixture, have sought to determine the role of the various Pt/TiO2 actives sites (i.e., Pt-metal, TiO2-support, Pt-TiO2-interfacial sites) in producing the observed desired deoxygenation and undesired decarboxylation/decarbonylation products. One important class of compounds in the CFP vapor-phase product is carboxylic acids (e.g., acetic acid). Prior experimental work on acetic acid HDO (AA-HDO) found that Pt/C and Pt/TiO2 catalysts favored the formation of undesired C-C and desired C-O bond-dissociation products; however, the fundamental surface chemistry driving this shift in selectivity has not been established. This presentation employs atomic-scale modeling to determine, through comparisons of adsorption and reaction energetics, how Pt-metal, Pt-TiO2-interface, and interfacial-vacancy sites catalyze the competing reaction pathways for AA-HDO. Our analysis indicates that hydroxyl vacancies at the Pt-TiO2 interface are critical for lowering barriers for C-O bond-cleavage steps, such that they become favorable/competitive with respect to C-C bond-dissociation steps.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2021

Phosphate-passivated mordenite for tandem-catalytic conversion of syngas to ethanol or acetic acid

Selective and stable production of C 2 oxygenates from syngas is enabled by a phosphate-passivated mordenite catalyst used in tandem with a commercial Cu/ZnO/AlMgO x catalyst. Unmodified mordenite used in this arrangement is accompanied by substantial hydrocarbon formation and carbon deposition. Therefore, phosphate groups are used to remove or significantly reduce Brønsted acidity in mordenite by capping aluminum sites. Such groups are stable to calcination and catalyst regeneration. Here, trimethylphosphite is used as a phosphate precursor because it is able to enter the 12 membered-ring pores of mordenite where hydrocarbon formation occurs, but not enter the 8 membered-ring sidepockets, where methanol carbonylation occurs selectively. The catalyst was characterized using X-ray fluorescence, X-ray diffraction, and thermal gravimetric analysis. Optionally, a third bed of Cu/ZnO/AlMgO x catalyst is able to hydrodeoxygenate acetic acid to ethanol. The C 2 oxygenate selectivity is over 96% and among the best reported in a single reactor with a syngas feed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Probing lead acetate in solution using X-ray diffraction

Here, for the purpose of water purification involving toxic metal sensing and removal, high energy X-ray diffraction experiments have been performed on lead acetate Pb(Ac) 2 solutions, liquid and amorphous glutathione disulfide (GSSG), and their mixtures. The data have been interpreted using Empirical Potential Structure Refinement and pair distribution function analysis. At the highest concentration of 1 M Pb(Ac) 2 in water, the lead molecules are found to cluster and the second shell in the water structure becomes slightly more ordered as the water molecules become compressed. Liquid and amorphous GSSG are found to hydrogen bond primarily via OH-O interactions, while NH-O bonds are much more distorted. Aqueous solutions of Pb(Ac) 2 + GSSG show the closest Pb-O (carboxyl) and Pb-N (amine) bonds both at a distance of 2.5 ± 0.1 Å at a concentration of 1 M Pb(Ac) 2 in water. At 0.75 M Pb(Ac) 2 in water, strong Pb-S bonds are found at a distance of 2.8 ± 0.1 Å. The implications for lead removal using capacitive deionization are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chemical insights into ethyl acetate flames from experiment and kinetic modeling: Laminar burning velocity, speciation and NO$_x$ emission

Oxygenated fuels, such as alcohols, ethers, and esters, are promising alternatives to conventional fuels. These fuels can help reduce detrimental emissions like carbon monoxide and unburned hydrocarbons and enhance octane ratings. Among these oxygenates, ethyl acetate (EA), a small alkyl ester sourced from biomass, emerges as a clean, promising energy carrier. It serves as a surrogate fuel to facilitate investigations into the combustion behaviours of biodiesel. Despite its importance, the literature knowledge of EA combustion characteristics is limited. Therefore, this study aims to broaden the knowledge of the combustion behaviour of this type of oxygenated fuel compound. In this study, we measured the laminar burning velocities of EA by employing a heat flux burner and a closed combustion vessel over the equivalence ratios of 0.7 – 1.7, pressures of 1 – 10 bar and temperatures ranging from 353 – 423 K. Further, we also measured the NOx emissions in exhaust gas of the premixed flames fueled by EA/air for the first time over the equivalence ratio of 0.8 – 1.2. Additionally, we employed a non-premixed counterflow flame setup for extensive characterisation of species and their concentration under diverse conditions encompassing various strain rates and oxygen concentrations. Finally, we utilized these newly measured data to construct and validate a detailed kinetic model developed as part of this work. The newly developed model will help characterize the combustion properties of EA.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Insight into Acetic Acid Synthesis from the Reaction of CH 4 and CO 2

The reaction of CH 4 and CO 2 to produce acetic acid is an atom-efficient way for using carbon resources and for mitigating CO 2 emissions. This article provides a critical assessment of the progress in this catalytic reaction from the perspective of identifying and constructing the active sites. We elucidate how Cu- and Zn-based catalysts with different structures are used for the activation of CH 4 and CO 2 . The differences in the metal oxidation state may affect the adsorption of CH 4 and CO 2 and consequently change the activation barriers for the dissociation of the C–H bond of CH 4 and the C–C coupling reaction. We discuss how the active sites and transition states can be modified by the location of metal sites, the framework environment, and the promotion effect of different acid sites. Additionally, we also compare different technologies, including catalyst pretreatment, preactivation with CO 2 , tandem reaction, and plasma-driven catalysis for the CH 4 and CO 2 conversion. We conclude by identifying opportunities for improving the efficiency of heterogeneous catalysts for this important reaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effect of Dilute Acetic Acid Hydrolysis on Xylooligosaccharide Production and the Inhibitory Effect of Cellulolytic Enzyme Lignin from Poplar

Acetic acid (AC) hydrolysis has been reported to prepare xylooligosaccharides (XOS) from poplar. However, the influence of AC hydrolysis on the lignin structure changes is not clear, which is important for the following enzymatic hydrolysis of poplar. Herein, AC was used to produce XOS, and cellulase adsorption on cellulolytic enzyme lignin (CEL) from AC-hydrolyzed poplar and its inhibitory effect on two commercial cellulase preparations were investigated. AC hydrolysis gave a XOS yield of 39.8% from poplar. After AC hydrolysis at 170 °C, the hydrophobicity and ζ-potential of CEL decreased to 2.3 L/g and 14.8 mV, respectively. The adsorption strength of CTec2 on CEL samples did not increase by AC hydrolysis, and the inhibitory effect of CEL on Celluclast 1.5L and β-glucosidase was observed, but not on CTec2. CEL samples improved the lytic polysaccharide monooxygenase (LPMO) activity of the enzymatic hydrolysis by CTec2. After CEL samples were added in enzymatic hydrolysis, the free filter paper activity of Celluclast 1.5L and β-G retained in the enzymatic hydrolysate decreased from 60.5 to 29.3–42.9%. The addition of CEL samples in enzymatic hydrolysis could not decrease the free filter paper activity of CTec2 retained in the enzymatic hydrolysate. In the enzymatic hydrolysis with CEL samples, higher glucose yields were obtained by CTec2 than those by Celluclast 1.5L and β-glucosidase. This work will help to understand the structure and inhibitory effects of AC-CELs and guide the development of AC hydrolysis for the production of XOS and monosaccharides from poplar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dynamics of hydride anion and acetyloxyl radical production by electron attachment to acetic acid

Here, we investigate the dynamics and site-selectivity in the dissociation of transient anions formed upon attachment of low energy electrons to acetic acid by anion fragment momentum imaging experiments. The resonances at 6.7 and 7.7 eV are confirmed to dissociate exclusively by the O–H bond, while a third resonance at 9.1 eV dissociates primarily by both C–H break and O–H break. A fourth resonance near 10 eV is found to dissociate by O–H break. For each resonance, the measured kinetic energy release indicates two-body dissociation produces a neutral radical in the ground electronic state, for all four resonances. The measured angular distributions are consistent with all four resonances having A' symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Monofluorinated acetal electrolyte for high-performance lithium metal batteries

High degree of fluorination for ether electrolytes has resulted in improved cycling stability of lithium metal batteries due to stable solid electrolyte interphase (SEI) formation and good oxidative stability. However, the sluggish ion transport and environmental concerns of high fluorination degree drive the need to develop less fluorinated structures. Here, we depart from the traditional ether backbone and introduce bis(2-fluoroethoxy)methane (F2DEM), featuring monofluorination of the acetal backbone. High coulombic efficiency and stable long-term cycling in Li||Cu half cells can be achieved with F2DEM even under fast Li metal plating conditions. The performance of F2DEM is further compared with diethoxymethane (DEM) and 2-[2-(2,2-difluoroethoxy)ethoxy]-1,1,1-trifluoroethane (F5DEE). A significantly lower overpotential is observed with F2DEM, which improves energy efficiency and enables its application in high-rate conditions. Comparative studies of F2DEM with DEM and F5DEE in anode-free lithium iron phosphate (LiFePO4) LFP pouch cells and high-loading LFP coin cells further show improved capacity retention of F2DEM electrolyte, demonstrating its practical applicability. More importantly, we also extensively investigate the underlying mechanism for the superior performance of F2DEM through various techniques, including X-ray photoelectron spectroscopy, scanning electron microscopy, cryogenic electron microscopy, focused ion beam, electrochemical impedance spectroscopy, and titration gas chromatography. Overall, F2DEM facilitates improved Li deposition morphology with reduced amount of dead Li. This enables F2DEM to show superior performance, especially under higher charging and slower discharging rate conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

Partial wet oxidation of dairy manure as a pretreatment process to produce acetic acid ‘a Source Growth of Methanogens’

Wet oxidation can be an effective process for the pretreatment of complex biomass such as lignocellulose. However, studies on the use of wet oxidation for treating solid waste such as dairy manure are limited. The use of partial wet oxidation to convert dairy manure into low molecular weight carboxylic acids as final products were investigated. This work focuses on the performance of the sub-critical wet oxidation treatment of dairy cattle manure as a conversion/pretreatment process to release matter from the lignocellulosic fraction rather than a destructive process. The operating conditions were controlled at the short residence time and optimal temperature in the presence of oxygen under a pressure of 120 psi. The thermal hydrolysis under wet oxidation significantly affected conversion manure slurry into organic acids. The concentration of acetic acid reached 1778 mg L –1 , achieved at 190°C (60 minutes reaction time) as the reaction temperature increased within the range of 150°C–200°C, total organic carbon was reduced and monomers in the process liquids decreased. On the other hand, soluble COD in process liquids increased with an increment in reaction temperature. The results provide insights into technical options to pretreat dairy manure to improve biochemical conversion yield.

09 BIOMASS FUELS↗
DOE OSTI2022

Restoration Insights Gained from a Field Deployment of Dithionite and Acetate at a Uranium In Situ Recovery Mine

Mining uranium by in situ recovery (ISR) typically involves injecting an oxidant and a complexing agent to mobilize and extract uranium in a saturated ore zone. This strategy involves less infrastructure and invasive techniques than traditional mining, but ISR often results in persistently elevated concentrations of U and other contaminants of concern in groundwater after mining. These concentrations may remain elevated for an extended period without remediation. Here, we describe a field experiment at an ISR facility in which both a chemical reductant (sodium dithionite) and a biostimulant (sodium acetate) were sequentially introduced into a previously mined ore zone in an attempt to establish reducing geochemical conditions that, in principle, should decrease and stabilize aqueous U concentrations. While several lines of evidence indicated that reducing conditions were established, U concentrations did not decrease, and in fact increased after the amendment deployments. We discuss likely reasons for this behavior, and we also discuss how the results provide insights into improvements that could be made to the restoration process to benefit from the seemingly detrimental behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Mercury Methylation and Soil Organic Matter Degradation in Incubations with Added Acetate, Isotope-Labeled Mercury, and Selective Microbial Inhibitors, Teller and Council Sites, Seward Peninsula, 2018-2019

This dataset provides the results of laboratory soil microcosm incubation experiments conducted under anaerobic conditions with added acetate, isotope-labeled mercury, and selective microbial inhibitors (2-bromoethanesulfonate and sodium molybdate). The microcosms contained soil collected in August 2018 from the NGEE Arctic Teller Road Site at mile marker 27 (TL_MM27) near Intensive Site 9 (TL_IS_9) and from the Council Road Site (CN_MM71). Incubations were conducted at 8°C for 180 days (Teller incubations) or 60 days (Council incubations). The microcosm headspace was sampled at designated intervals for greenhouse gas concentrations, then destructively harvested and extracted using ultrapure water and 0.1 M KCl for analysis of the porewater geochemistry. This dataset contains one pdf, two csv data files, and one zipped file with raw data.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

The work summarized in this presentation builds off of these studies, utilizing atomic-scale modeling to discern the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. By considering Pt(111) and Pt-TiO2-interface surface models, adsorption and reaction energetics calculated by density funcational theory provide fundamental insights into the role of both interfacial sites and oxygen vacancies in promoting desired deoxygenation pathways over undesired decarboxylation/decarbonylation pathways.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Bio‐Inspired Cascade Photocatalysis on Fe Single‐Atom Carbon Nitride Upcycles Plastic Wastes for Effective Acetic Acid Production

Plastic imposes a critical threat to the environment, ecosystems, and human health because of the low utilization efficiency of plastics. Here, we demonstrate a sustainable, highly efficient cascade photocatalysis for upcycle plastics to value-added acetic acid using Fe single-atom catalysts (Fe@C 3 N 4 SAC) at ambient conditions. Inspired by Phanerochaete chrysosporium microbial, the defective Fe@C 3 N 4 SAC acts as a bifunctional cascade photocatalyst for both Fenton-like and CO 2 reduction reactions. During the reaction, hydroxyl radicals (*OH) form and subsequently oxidize plastics into CO 2 intermediates. These CO 2 intermediates are then photo-reduced to CH 3 COOH on the same catalyst via cascade photocatalysis. The mechanism is confirmed by in situ multimodal microscopy and spectroscopies, with density functional theory calculations. A state-of-art CH 3 COOH yield of 63.8 mg h −1 gcat −1 from PVC, 12.7 mg h −1 gcat −1 from PE, 5.4 mg h −1 gcat −1 from PET, and 5.3 mg h −1 gcat −1 from PP are directly obtained under AM1.5G solar irradiation and further validated under real sunlight (≈0.6 sun), achieving 5.6 mg h −1 gcat −1 from PET, using low-cost Fe@C 3 N 4 SAC in a sealed reactor by enhancing the photon transport and utilization efficiency. The techno-economic analysis shows it is promising to practically mitigate plastic based on broader social welfare assessments.

cascade photocatalysis↗
DOE OSTI2023

Thermal behaviors of ethylene vinyl acetate encapsulants in fielded silicon photovoltaic modules

Aging of silicon photovoltaic (PV) module packaging is one of the greatest limiters of PV module service lifetimes. Module characterization typically focuses on power degradation metrics, which do not convey the complexities of often simultaneous degradation mechanisms. In this work, PV modules with pristine references and known fielding histories were investigated by non-destructive and destructive methods. Modules from Canadian Solar, Mission Solar, and Hanwha Q-Cells were fielded for up to three years; select modules were removed from fielding each year for coring to allow for characterization of the encapsulant. Modules are commonly encapsulated with two protective layers of partially-crystalline ethylene vinyl acetate (EVA) polymer that must undergo a crosslinking reaction to achieve desired properties. The extent of crystallinity of the encapsulants as studied by differential scanning calorimetry showed differences between manufacturers and over time. Some encapsulants showed different magnitudes of crystal sizes which changed after fielding; encapsulants with the monodisperse crystal sizes did not change with fielding. This is due to differences in thermal history. In conclusion, these results have implications for stress development during module aging, since EVA crystal melting and crosslinking reactions can result in encapsulant density changes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multinuclear 1 H/ 13 C/ 15 N chemical shift assignment of therapeutic octreotide acetate performed at natural abundance

Abstract Octreotide acetate, the active pharmaceutical ingredient in the long‐acting release (LAR) drug product Sandostatin®, is a cyclic octapeptide that mimics the naturally occurring somatostatin peptide hormone. Modern NMR can be a robust analytical method to identify and quantify octreotide molecules. Previous 1 H chemical shift assignments were mostly performed in organic solvents, and no assignments for heteronuclear 13 C, 15 N, and aromatic 1 H nuclei are available. Here, using state‐of‐the‐art 1D and 2D homo‐ and heteronuclear NMR experiments, octreotide was fully assigned, including water exchangeable amide protons, in aqueous buffer except for 13 CO and 15 NH of F1, 15 NH of C2, and 15 NζHζof K5 that were not observed because of water exchange or conformational exchange. The solution NMR spectra were then directly compared with 1D 1 H/ 13 C/ 15 N solid‐state NMR (SSNMR) spectra showing the potential applicability of 13 C/ 15 N SSNMR for octreotide drug product characterization.

Chemistry↗
DOE OSTI2020

Thermal Stability of a Eutectic Mixture of Bis(2,2-dinitropropyl) Acetal and Formal: Part C. Kinetic Compensation Effect

Here, the aging behavior of a eutectic mixture of bis(2,2-dinitropropyl) acetal and formal [called NP here] has been studied in various atmospheres [dry (air or nitrogen) versus wet] at temperatures 70 °C and below. The properties of aged samples were analyzed using Fourier transform infrared (FTIR) spectroscopy, Karl Fischer (KF) titration, liquid chromatography/mass spectrometry (LC/MS), and thermogravimetric analysis (TGA) over a period of three years. The results indicate that at aging temperatures up to 55 °C, the initial rates of water production from nitrous acid (HONO) formation and decomposition into the water, NO, and NO 2 follows a 1st order rate law and the rate constants follow an Arrhenius law as a function of temperature. The activation energies and pre-factors for water and volatiles production yield a single linear kinetic compensation plot, suggesting a common degradation pathway between NP and the various combinations of its constituents. Within a narrow temperature range, around 55 °C, a trace amount of water in NP stabilizes its properties by preventing HONO elimination. When the aging temperature is substantially higher than 55 °C, the nature of the degradation mechanism changes. It is suspected that the degradation products of NO x , water, and HNO 3 serve as catalysts to auto-catalyze (kinetics beyond the 1st order) and further degrade NP. The effect of headspace volume on this auto-catalytic process will be discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗