Search NASA⌕ Search

SEARCH · Search NASA

Results for “AEROSOLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Use of A-Train Aerosol Observations to Constrain Direct Aerosol Radiative Effects (DARE) Comparisons with Aerocom Models and Uncertainty Assessments

We describe a technique for combining multiple A-Train aerosol data sets, namely MODIS spectral AOD (aerosol optical depth), OMI AAOD (absorption aerosol optical depth) and CALIOP aerosol backscatter retrievals (hereafter referred to as MOC retrievals) to estimate full spectral sets of aerosol radiative properties, and ultimately to calculate the 3-D distribution of direct aerosol radiative effects (DARE). We present MOC results using almost two years of data collected in 2007 and 2008, and show comparisons of the aerosol radiative property estimates to collocated AERONET retrievals. Use of the MODIS Collection 6 AOD data derived with the dark target and deep blue algorithms has extended the coverage of the MOC retrievals towards higher latitudes. The MOC aerosol retrievals agree better with AERONET in terms of the single scattering albedo (ssa) at 441 nm than ssa calculated from OMI and MODIS data alone, indicating that CALIOP aerosol backscatter data contains information on aerosol absorption. We compare the spatio-temporal distribution of the MOC retrievals and MOC-based calculations of seasonal clear-sky DARE to values derived from four models that participated in the Phase II AeroCom model intercomparison initiative. Overall, the MOC-based calculations of clear-sky DARE at TOA over land are smaller (less negative) than previous model or observational estimates due to the inclusion of more absorbing aerosol retrievals over brighter surfaces, not previously available for observationally-based estimates of DARE. MOC-based DARE estimates at the surface over land and total (land and ocean) DARE estimates at TOA are in between previous model and observational results. Comparisons of seasonal aerosol property to AeroCom Phase II results show generally good agreement best agreement with forcing results at TOA is found with GMI-MerraV3. We discuss sampling issues that affect the comparisons and the major challenges in extending our clear-sky DARE results to all-sky conditions. We present estimates of clear-sky and all-sky DARE and show uncertainties that stem from the assumptions in the spatial extrapolation and accuracy of aerosol and cloud properties, in the diurnal evolution of these properties, and in the radiative transfer calculations.

aerosol↗

Impacts of aerosol size-dependent below-cloud scavenging on tropospheric aerosol in the NASA GEOS model

Cloud scavenging is the major sink for a suite of tropospheric aerosols, and thus largely affects the global distribution and lifetime of aerosols as well as the formation of clouds. Simplified model parameterizations of cloud scavenging of aerosols substantially contribute to large uncertainties in the simulated aerosol burdens, spatial distributions, lifetimes, as well as aerosol radiative forcing. Here we evaluate the wet scavenging scheme in the current NASA GEOS model, develop more physically-based parameterizations of below-cloud scavenging, and assess the impacts of the new scavenging parameterizations on the GEOS simulations of aerosols. The current below-cloud scavenging (BCS; washout) scheme uses a first-order removal with a constant scavenging coefficient. We replaced the current scheme with a size-dependent parameterization of Croft et al.(Atmos. Chem. Phys., 2009; hereafter referred to as C09). The C09 BCS parameterizations calculate aerosol below-cloud scavenging coefficients based on a size-dependent collision efficiency between aerosol particles and raindrops (or snow crystals). A look-up table of compiled collision efficiencies provides values for sixty aerosol sizes and nine rain flux rates. Snow-aerosol collision efficiencies are a function of the sixty aerosol sizes only. We assume a log-normal size distribution for aerosols (bulk) in GOCART. The collision efficiencies are then calculated online using a bilinear interpolation from the look-up table for the given aerosol sizes and precipitation flux rates in the model.

aerosols↗

Three-Wavelength Approach for Aerosol-Cloud Discrimination in the Sage III/ISS Aerosol Extinction Dataset

The tropical upper troposphere and lower stratosphere (UTLS) region is dominated by aerosols and clouds affecting Earth’s radiation budget and climate. Thus, satellites’ continuous monitoring and identification of these layers is crucial for quantifying their radiative impact. However, distinguishing between aerosols and clouds is challenging, especially under the perturbed UTLS conditions during post-volcanic eruptions and wildfire events. Aerosol-cloud discrimination is primarily based on their disparate wavelength-dependent scattering and absorption properties. In this study, we use aerosol extinction observations in the tropical (15°N-15°S) UTLS from June 2017 to February 2021, available from the latest generation of the Stratospheric Aerosol and Gas Experiment (SAGE) instrument-SAGE III onboard the International Space Station (ISS) to study aerosols and clouds. During this period, the SAGE III/ISS provided better coverage over the tropics at additional wavelength channels (relative to previous SAGE missions) and witnessed several volcanic and wildfire events that perturbed the tropical UTLS. We explore the advantage of having an extinction coefficient at an additional wavelength channel (1550 nm) from the SAGE III/ISS in aerosol-cloud discrimination using a method based on thresholds of two extinction coefficient ratios, R1R1 (520 nm/1020 nm) and R2R2 (1020 nm/1550 nm). This method was proposed earlier by Kent et al. [Appl. Opt. 36, 8639 (1997) [CrossRef] ] for the SAGE III-Meteor-3M but was never tested for the tropical region under volcanically perturbed conditions. We call this method the Extinction Color Ratio (ECR) method. The ECR method is applied to the SAGE III/ISS aerosol extinction data to obtain cloud-filtered aerosol extinction coefficients, cloud-top altitude, and seasonal cloud occurrence frequency during the entire study period. Cloud-filtered aerosol extinction coefficient obtained using the ECR method revealed the presence of enhanced aerosols in the UTLS following volcanic eruptions and wildfire events consistent with the Ozone Mapping and Profiler Suite (OMPS) and space-borne lidar-Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The cloud-top altitude obtained from the SAGE III/ISS is within 1 km of the nearly co-located observations from OMPS and CALIOP. In general, the seasonal mean cloud-top altitude from the SAGE III/ISS events peaks during the December, January, and February months, with sunset events showing higher cloud tops than the sunrise events, indicating the seasonal and diurnal variation of the tropical convection. The seasonal altitude distribution of cloud occurrence frequency obtained from the SAGE III/ISS also agrees well with CALIOP observations within 10%. We show that the ECR method is a simple approach that relies on thresholds independent of the sampling period, providing cloud-filtered aerosol extinction coefficients uniformly for climate studies irrespective of the UTLS conditions. However, since the predecessor of SAGE III did not include a 1550 nm channel, the usefulness of this approach is limited to short-term climate studies after 2017.

Clouds Aerosols↗

Quantifying structural errors in cloud condensation nuclei activity from reduced representation of aerosol size distributions

Aerosol effects on clouds and radiation are the dominant contribution to uncertainty in radiative forcing relative to the pre-industrial atmosphere. While previous studies have assessed the impact of parametric uncertainty on modeled forcing, structural errors from the numerical representation of particle distributions have not been well quantified. Here we present a framework for quantifying error in aerosol size distributions and cloud condensation nuclei activity, which we apply to the widely used 4-mode version of the Modal Aerosol Module (MAM4). Box model predictions from the MAM4 are evaluated against the Particle Monte Carlo Model for Simulating Aerosol Interactions and Chemistry (PartMC-MOSAIC), a benchmark model that tracks the evolution of individual particles. We show that size distributions simulated by MAM4 diverge from those simulated by PartMC-MOSAIC after only a few hours of aging by condensation and coagulation in polluted conditions, which leads to large errors in modeled cloud condensation nuclei concentrations. We find that differences between MAM4 and PartMC-MOSAIC are largest under polluted conditions, where the size distribution evolves rapidly though aging by condensation of semi-volatile substances and coagulation among particles. These findings suggest that structural error in modeled aerosol properties contributes to the large inter-model variability in aerosol radiative forcing.

Fierce, Laura M.↗

Aerosol properties and their influences on low warm clouds during the Two-Column Aerosol Project

Twelve months of measurements collected during the Two-ColumnAerosol Project field campaign at Cape Cod, Massachusetts, which started inthe summer of 2012, were used to investigate aerosol physical, optical, andchemical properties and their influences on the dependence of clouddevelopment on thermodynamic (i.e., lower tropospheric stability, LTS)conditions. Relationships between aerosol loading and cloud properties underdifferent dominant air-mass conditions and the magnitude of the firstindirect effect (FIE), as well as the sensitivity of the FIE to differentaerosol compositions, are examined. The seasonal variation in aerosol numberconcentration (Na) was not consistent with variations in aerosoloptical properties (i.e., scattering coefficient, σs, andcolumnar aerosol optical depth). Organics were found to have a largecontribution to small particle sizes. This contribution decreased during theparticle growth period. Under low-aerosol-loading conditions, the liquidwater path (LWP) and droplet effective radius (DER) significantly increasedwith increasing LTS, but, under high-aerosol-loading conditions, LWP and DERchanged little, indicating that aerosols significantly weakened thedependence of cloud development on LTS. The reduction in LWP and DER fromlow- to high-aerosol-loading conditions was greater in stable environments,suggesting that clouds under stable conditions are more susceptible toaerosol perturbations than those under more unstable conditions. Highaerosol loading weakened the increase in DER as LWP increased andstrengthened the increase in cloud optical depth (COD) with increasing LWP,resulting in changes in the interdependence of cloud properties. Under bothcontinental and marine air-mass conditions, high aerosol loading cansignificantly increase COD and decrease LWP and DER, narrowing theirdistributions. Magnitudes of the FIE estimated under continental air-massconditions ranged from 0.07±0.03 to 0.26±0.09 with a meanvalue of 0.16±0.03 and showed an increasing trend as LWP increased.The calculated FIE values for aerosols with a low fraction of organics aregreater than those for aerosols with a high fraction of organics. Thisimplies that clouds over regions dominated by aerosol particles containingmostly inorganics are more susceptible to aerosol perturbations, resultingin larger climate forcing, than clouds over regions dominated by organicaerosol particles.

54 ENVIRONMENTAL SCIENCES↗

Quantifying the impacts of marine aerosols over the southeast Atlantic Ocean using a chemical transport model: implications for aerosol–cloud interactions

The southeast Atlantic region, characterized by persistent stratocumulus clouds, has one of the highest uncertainties in aerosol radiative forcing and significant variability across climate models. In this study, we analyze the seasonally varying role of marine aerosol sources and identify key uncertainties in aerosol composition at cloud-relevant altitudes over the southeast Atlantic using the GEOS-Chem chemical transport model. We evaluate simulated aerosol optical depth (AOD) and speciated aerosol concentrations against those collected from ground observations and aircraft campaigns such as LASIC, ORACLES, and CLARIFY, conducted during 2017. The model consistently underestimates AOD relative to AERONET, particularly at remote locations like Ascension Island. However, when compared with aerosol mass concentrations from aircraft campaigns during the biomass burning period, it performs adequately at cloud-relevant altitudes, with a normalized mean bias (NMB) between -3.5 % (CLARIFY) and -7.5 % (ORACLES). At these altitudes, in the model, organic aerosols (63 %) dominate during the biomass burning period, while sulfate (41 %) prevails during austral summer, when dimethylsulfide (DMS) emissions peak in the model. Our findings indicate that marine sulfate can account for up to 69 % of total sulfate during the high-DMS period. Sensitivity analyses indicate that refining DMS emissions and oxidation chemistry may increase sulfate aerosol produced from marine sources, highlighting that there remains large uncertainty as to the role of DMS emissions in the marine boundary layer. Additionally, we find marine primary organic aerosol emissions may substantially increase total organic aerosol concentrations, particularly during austral summer. This study underscores the imperative need to refine marine emissions and their chemical transformations, as aerosols from marine sources are a major component of total aerosols at cloud-relevant altitudes and may impact uncertainties in aerosol radiative forcing over the southeast Atlantic.

54 ENVIRONMENTAL SCIENCES↗

A new technique to retrieve aerosol vertical profiles using micropulse lidar and ground-based aerosol measurements

Accurately characterizing the vertical distribution of aerosols and their cloud-forming properties is crucial for understanding aerosol-cloud interactions and their impact on climate. This study presents a novel technique for retrieving vertical profiles of aerosols, cloud condensation nuclei (CCN), and ice nucleating particles (INP) by combining micropulse lidar, radiosonde, and ground-based aerosol measurements. Herein, the technique is applied to data collected by our team at Texas A&M University during the Tracking Aerosol Convection Interactions ExpeRiment (TRACER) campaign. Ground-based aerosol size distribution and CCN counter data are used to estimate the value of the aerosol hygroscopicity parameter, κ. The derived κ, together with Mie scattering theory and the relative humidity profile from the radiosonde, is used to estimate aerosol size growth and the associated increase in backscatter at each altitude. We then correct the lidar backscatter to dry conditions to produce the dry aerosol backscatter coefficient profile. The dry aerosol backscatter coefficient profile is linearly scaled to collocated surface measurements of aerosols, CCN, and INP to produce corresponding vertical profiles. Combining lidar backscatter profiles with aerosol and cloud nucleation measurements leads to a more realistic representation of vertical distributions of aerosol properties. The method could be readily applied to lidar measurements in future field campaigns.

Chen, Bo [Texas A & M Univ., College Station, TX (↗

Direct Aerosol Radiative Forcing Based on Combined A-Train Observations: Towards All-sky Estimates and Attribution to Aerosol Type

We describe a technique for combining CALIOP aerosol backscatter, MODIS spectral AOD (aerosol optical depth), and OMI AAOD (absorption aerosol optical depth) measurements for the purpose of estimating full spectral sets of aerosol radiative properties, and ultimately for calculating the 3-D distribution of direct aerosol radiative forcing. We present results using one year of data collected in 2007 and show comparisons of the aerosol radiative property estimates to collocated AERONET retrievals. Initial calculations of seasonal clear-sky aerosol radiative forcing based on our multi-sensor aerosol retrievals compare well with over-ocean and top of the atmosphere IPCC-2007 model-based results, and with more recent assessments in the "Climate Change Science Program Report: Atmospheric Aerosol Properties and Climate Impacts" (2009). We discuss some of the challenges that exist in extending our clear-sky results to all-sky conditions. On the basis of comparisons to suborbital measurements, we present some of the limitations of the MODIS and CALIOP retrievals in the presence of adjacent or underlying clouds. Strategies for meeting these challenges are discussed. We also discuss a methodology for using the multi-sensor aerosol retrievals for aerosol type classification based on advanced clustering techniques. The combination of research results permits conclusions regarding the attribution of aerosol radiative forcing to aerosol type.

AOD↗

Climatology of aerosol optical depth in north-central Oklahoma: 1992–2008

Aerosol optical depth (AOD) has been measured at the Atmospheric Radiation Measurement Program central facility near Lamont, Oklahoma, since the fall of 1992. Most of the data presented are from the multifilter rotating shadowband radiometer, a narrow-band, interference-filter Sun radiometer with five aerosol bands in the visible and near infrared; however, AOD measurements have been made simultaneously and routinely at the site by as many as three different types of instruments, including two pointing Sun radiometers. Scatterplots indicate high correlations and small biases consistent with earlier comparisons. The early part of this 16 year record had a disturbed stratosphere with residual Mt. Pinatubo aerosols, followed by the cleanest stratosphere in decades. As such, the last 13 years of the record reflect changes that have occurred predominantly in the troposphere. The field calibration technique is briefly described and compared to Langley calibrations from Mauna Loa Observatory. A modified cloudscreening technique is introduced that increases the number of daily averaged AODs retrieved annually to about 250 days compared with 175 days when a more conservative method was employed in earlier studies. AODs are calculated when the air mass is less than six; that is, when the Sun’s elevation is greater than 9.25°. The more inclusive cloud screen and the use of most of the daylight hours yield a data set that can be used to more faithfully represent the true aerosol climate for this site. The diurnal aerosol cycle is examined month-by-month to assess the effects of an aerosol climatology on the basis of infrequent sampling such as that from satellites.

14 SOLAR ENERGY↗

Spatial and temporal variations of aerosols around Beijing in summer 2006: 2. Local and column aerosol optical properties

Weather Research and Forecasting (WRF)-chem model calculations were conducted to study aerosol optical properties around Beijing, China, during the Campaign of Air Quality Research in Beijing and Surrounding Region 2006 (CAREBeijing-2006) period. In this paper, we interpret aerosol optical properties in terms of aerosol mass concentrations and their chemical compositions by linking model calculations with measurements. In general, model calculations reproduced observed features of spatial and temporal variations of various surface and column aerosol optical parameters in and around Beijing. Spatial and temporal variations of aerosol absorption, scattering, and extinction coefficient corresponded well to those of elemental carbon (primary aerosol), sulfate (secondary aerosol), and the total aerosol mass concentration, respectively. These results show that spatial and temporal variations of the absorption coefficient are controlled by local emissions (within 100 km around Beijing during the preceding 24 h), while those of the scattering coefficient are controlled by regional-scale emissions (within 500 km around Beijing during the preceding 3 days) under synoptic-scale meteorological conditions, as discussed in our previous study of aerosol mass concentration. Vertical profiles of aerosol extinction revealed that the contribution of secondary aerosols and their water uptake increased with altitude within the planetary boundary layer, leading to a considerable increase in column aerosol optical depth (AOD) around Beijing. These effects are the main factors causing differences in regional and temporal variations between particulate matter (PM) mass concentration at the surface and column AOD over a wide region in the northern part of the Great North China Plain.

54 ENVIRONMENTAL SCIENCES↗

An Improved Representation of Aerosol Wet Removal by Deep Convection and Impacts on Simulated Aerosol Vertical Profiles

Here, we introduce a physics-based aerosol wet removal scheme with unified treatments of aerosol transport and removal by convective clouds into the Community Atmosphere Model version 6. Since several important physical processes are still neglected or poorly represented in this new physics-based scheme, we develop secondary improvements to the parameterizations of aerosol activation, resuspension, and cloud-borne aerosol detrainment in this new scheme. Changes in the aerosol wet removal scheme cause tropospheric aerosol concentrations to decrease to different extents: compared to the control run, the physics-based scheme significantly decreases aerosol burdens by up to 60% over the southern Pacific Ocean, whereas the secondary improvements mitigate the decreasing tendency. The burden changes also depend on aerosol chemical components: the sulfate mass decrease is compensated by secondary production, black carbon (BC) is effectively removed via increasing the hygroscopicity of particulate organic matter from 0 to 0.2, and dust shows the most spatially heterogeneous changes. Simulated aerosol profiles are evaluated against aircraft-based observations over the Pacific and Atlantic Oceans. The secondary-improved scheme reduces the overestimations of upper tropospheric BC and sea salt concentrations by a factor of 10 and 1,000, respectively, and reproduces the dependence of BC mass decrease rates on cloud types. Consideration of convective cloud-borne aerosol detrainment plays the most important role in enhancing the aerosol wet removal and decreasing the positive biases of tropospheric BC and sea salt concentrations. We also summarize unresolved issues related to convective cloud genesis and microphysics, cloud-borne aerosol evolution, and BC and dust emissions.

54 ENVIRONMENTAL SCIENCES↗

Dry Deposition of Atmospheric Aerosols: Approaches, Observations, and Mechanisms

Aerosols are liquid or solid particles suspended in the atmosphere, typically with diameters on the order of nanometers to microns. These particles impact air quality and the radiative balance of the planet. Dry deposition is a key process for the removal of aerosols from the atmosphere and plays an important role in controlling the lifetime of atmospheric aerosols. Dry deposition is driven by turbulence and shows a strong dependence on particle size. This review summarizes the mechanisms behind aerosol dry deposition, including measurement approaches, field observations, and modeling studies. We identify several gaps in the literature, including deposition over the cryosphere (i.e., snow and ice surfaces) and the ocean; in addition, we highlight new techniques to measure black carbon fluxes. While recent advances in aerosol instrumentation have enhanced our understanding of aerosol sources and chemistry, dry deposition and other loss processes remain poorly investigated.

Chemistry↗

Aerosol meteorology of Maritime Continent for the 2012 7SEAS southwest monsoon intensive study – Part 2: Philippine receptor observations of fine-scale aerosol behavior

The largest 7 Southeast Asian Studies (7SEAS) operations period within the Maritime Continent (MC) occurred in the August–September 2012 biomass burning season. Data included were observations aboard the M/Y Vasco , dispatched to the Palawan Archipelago and Sulu Sea of the Philippines for September 2012. At these locations, the Vasco observed MC smoke and pollution entering the southwest monsoon (SWM) monsoonal trough. Here we describe the research cruise findings and the finer-scale aerosol meteorology of this convectively active region. This 2012 cruise complemented a 2-week cruise in 2011 and was generally consistent with previous findings in terms of how smoke emission and transport related to monsoonal flows, tropical cyclones (TC), and the covariance between smoke transport events and the atmosphere's thermodynamic structure. Biomass burning plumes were usually mixed with significant amounts of anthropogenic pollution. Also key to aerosol behavior were squall lines and cold pools propagating across the South China Sea (SCS) and scavenging aerosol particles in their path. However, the 2012 cruise showed much higher modulation in aerosol frequency than its 2011 counterpart. Whereas in 2011 large synoptic-scale aerosol events transported high concentrations of smoke into the Philippines over days, in 2012 measured aerosol events exhibited a much shorter-term variation, sometimes only 3$-$12 h. Strong monsoonal flow reversals were also experienced in 2012. Nucleation events in cleaner and polluted conditions, as well as in urban plumes, were observed. Perhaps most interestingly, several cases of squall lines preceding major aerosol events were observed, as opposed to 2011 observations where these lines largely scavenged aerosol particles from the marine boundary layer. Combined, these observations indicate pockets of high and low particle counts that are not uncommon in the region. These perturbations are difficult to observe by satellite and very difficult to model. Indeed, the Navy Aerosol Analysis and Prediction System (NAAPS) simulations captured longer period aerosol events quite well but largely failed to capture the timing of high-frequency phenomena. Ultimately, the research findings of these cruises demonstrate the real world challenges of satellite-based missions, significant aerosol life cycle questions such as those the future Aerosol/Clouds/Ecosystems (ACE) will investigate, and the importance of small-scale phenomena such as sea breezes, squall lines, and nucleation events embedded within SWM patterns in dominating aerosol life cycle and potential relationships to clouds.

aerosols↗

MATRIX (Multiconfiguration Aerosol TRacker of mIXing state): an aerosol microphysical module for global atmospheric models

A new aerosol microphysical module MATRIX, the Multiconfiguration Aerosol TRacker of mIXing state, and its application in the Goddard Institute for Space Studies (GISS) climate model (ModelE) are described. This module, which is based on the quadrature method of moments (QMOM), represents nucleation, condensation, coagulation, internal and external mixing, and cloud-drop activation and provides aerosol particle mass and number concentration and particle size information for up to 16 mixed-mode aerosol populations. Internal and external mixing among aerosol components sulfate, nitrate, ammonium, carbonaceous aerosols, dust and sea-salt particles are represented. The solubility of each aerosol population, which is explicitly calculated based on its soluble and insoluble components, enables calculation of the dependence of cloud drop activation on the microphysical characterization of multiple soluble aerosol populations. A detailed model description and results of box-model simulations of various aerosol population configurations are presented. The box model experiments demonstrate the dependence of cloud activating aerosol number concentration on the aerosol population configuration; comparisons to sectional models are quite favorable. MATRIX is incorporated into the GISS climate model and simulations are carried out primarily to assess its performance/efficiency for global-scale atmospheric model application. Simulation results were compared with aircraft and station measurements of aerosol mass and number concentration and particle size to assess the ability of the new method to yield data suitable for such comparison. The model accurately captures the observed size distributions in the Aitken and accumulation modes up to particle diameter 1 {micro}m, in which sulfate, nitrate, black and organic carbon are predominantly located; however the model underestimates coarse-mode number concentration and size, especially in the marine environment. This is more likely due to oversimplifications of the representation of sea salt emissions - sea salt emissions are only calculated for two size classes - than to inherent limitations of MATRIX.

54 ENVIRONMENTAL SCIENCES↗

Quantification of Aerosol Type, and Sources of Aerosols Over the Indo- Gangetic Plain

Differences and similarities in aerosol characteristics, for the first time, over two environmentally distinct locations in Indo-Gangetic plain (IGP) e Kanpur (KPR) (urban location) and Gandhi College (GC) (rural site) are examined. Aerosol optical depths (AODs) exhibit pronounced seasonal variability with higher values during winter and premonsoon. Aerosol fine mode fraction (FMF) and Ångstrom exponent (a) are higher over GC than KPR indicating relatively higher fine mode aerosol concentration over GC. Higher FMF over GC is attributed to local biomass burning activities. Analysis of AOD spectra revealed that aerosol size distribution is dominated by wide range of fine mode fractions or mixture of modes during winter and postmonsoon, while during premonsoon and monsoon coarse mode aerosols are more abundant. Single scattering albedo (SSA) is lower over GC than KPR. SSA spectra reveals the abundance of fine mode (coarse mode) absorbing (scattering) aerosols during winter and postmonsoon (premonsoon and monsoon). Spectral SSA features reveal that OC contribution to enhanced absorption is negligible. Analysis shows that absorbing aerosols can be classified as Mostly Black Carbon (BC), and Mixed BC and Dust over IGP. Mixed BC and dust is always higher over KPR, while Mostly BC is higher over GC throughout the year. The amount of long range transported dust exhibits a gradient between KPR (higher) and GC (lower). Results on seasonally varying aerosol types, and absorbing aerosol types and their gradients over an aerosol hotspot are important to tune models and to reduce the uncertainty in radiative and climate impact of aerosols.

Organic Carbon↗

Influence of Surface Aerosol Injection on Stratocumulus‐to‐Cumulus Transition: Cloud‐Surface Coupling and Background Aerosol Concentrations

The influence of surface aerosol injection on the stratocumulus‐to‐cumulus transition (SCT) is explored using large‐eddy simulations. We examine how cloud‐surface coupling (or the strength of the marine boundary layer (MBL) stratification that limits vertical turbulent mixing and convection) impacts the vertical transport of aerosols, and how injected aerosols influence cloud properties and associated cloud radiative effects during the SCT. By injecting aerosols at different stages of the SCT, noting that cloud is more decoupled from the surface over time due to entrainment warming, we find that cloud‐surface coupling significantly affects aerosol vertical transport. However, injection timing (before drizzle if any) does not notably affect the SCT and the efficiency of marine cloud brightening, because aerosol number concentrations due to injections at different times rapidly converge before the transition onset. By varying the background aerosol concentration, we find that injected aerosols can significantly extend the persistence of stratocumulus decks by suppressing precipitation in clean environments but have little impact on stratocumulus breakup with higher background aerosol concentrations due to saturated aerosol effects. In clean MBLs, the SCT‐delay‐induced increase in cloud fraction dominates the overall cooling effects in response to aerosols, followed by Twomey effects. These cooling effects are slightly offset by decreased liquid water path (LWP) due to entrainment drying. In polluted MBLs, the Twomey effect is more dominant, followed by cloud fraction adjustments, and these coolings are also partly offset by LWP adjustments. All the simulations are made in relatively small domains in which injected aerosols are homogenized over a short time scale.

Zhang, Haipeng [Univ. of Maryland, College Park, M↗

Characterizing Organic Aerosol Processes and Climatically Relevant Properties via Advanced and Integrated Analyses of Aerosol Mass Spectrometry Datasets from DOE Campaigns and ACRF Measurements. Final report for DE-SC0007178

Organic aerosols (OA) are an important but poorly characterized component of the earth’s climate system. Enormous complexities commonly associated with OA composition and life cycle processes have significantly complicated the simulation and quantification of aerosol effects. To unravel these complexities and improve understanding of the properties, sources, formation, evolution processes, and radiative properties of atmospheric OA, we propose to perform advanced and integrated analyses of multiple DOE aerosol mass spectrometry datasets, including two high-resolution time-of-flight aerosol mass spectrometer (HR-AMS) datasets from intensive field campaigns on the aerosol life cycle and the Aerosol Chemical Speciation Monitor (ACSM) datasets from long-term routine measurement programs at ACRF sites. In this project, we will focus on 1) characterizing the chemical (i.e., composition, organic elemental ratios), physical (i.e., size distribution and volatility), and radiative (i.e., sub- and super-saturated growth) properties of organic aerosols, 2) examining the correlations of these properties with different source and process regimes (e.g., primary, secondary, urban, biogenic, biomass burning, marine, or mixtures), 3) quantifying the evolutions of these properties as a function of photochemical processing, 4) identifying and characterizing special cases for important processes such as SOA formation and new particle formation and growth, and 5) correlating size-resolved aerosol chemistry with measurements of radiative properties of aerosols to determine the climatically relevant properties of OA and characterize the relationship between these properties and processes of atmospheric aerosol organics. Our primary goal is to improve a process-level understanding of the life cycle of organic aerosols in the Earth’s atmosphere. We will also aim at bridging between observations and models via synthesizing and translating the results and insights generated from this research into data products and formulations that may be directly used to inform, improve, and evaluate regional and global models. In addition, we will continue our current very active collaborations with several modeling groups to enhance the use and interpretation of our data products. Overall, this research will contribute new data to improve quantification of the aerosol’s effects on climate and thus the achievement of ASR’s science goal of – “improving the fidelity and predictive capability of global climate models”.

54 ENVIRONMENTAL SCIENCES↗

Aerosol Lidar and MODIS Satellite Comparisons for Future Aerosol Loading Forecast

Knowledge of the concentration and distribution of atmospheric aerosols using both airborne lidar and satellite instruments is a field of active research. An aircraft based aerosol lidar has been used to study the distribution of atmospheric aerosols in the California Central Valley and eastern US coast. Concurrently, satellite aerosol retrievals, from the MODIS (Moderate Resolution Imaging Spectroradiometer) instrument aboard the Terra and Aqua satellites, were take over the Central Valley. The MODIS Level 2 aerosol data product provides retrieved ambient aerosol optical properties (e.g., optical depth (AOD) and size distribution) globally over ocean and land at a spatial resolution of 10 km. The Central Valley topography was overlaid with MODIS AOD (5x5 sq km resolution) and the aerosol scattering vertical profiles from a lidar flight. Backward air parcel trajectories for the lidar data show that air from the Pacific and northern part of the Central Valley converge confining the aerosols to the lower valley region and below the mixed layer. Below an altitude of 1 km, the lidar aerosol and MODIS AOD exhibit good agreement. Both data sets indicate a high presence of aerosols near Bakersfield and the Tehachapi Mountains. These and other results to be presented indicate that the majority of the aerosols are below the mixed layer such that the MODIS AOD should correspond well with surface measurements. Lidar measurements will help interpret satellite AOD retrievals so that one day they can be used on a routine basis for prediction of boundary layer aerosol pollution events.

DeYoung, Russell↗