Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Evolution of Bonding and Magnetism via Changes in Valence Electron Count in CuFe 2– x Co x Ge 2

A series of solid solutions, CuFe 2–x Co x Ge 2 (x = 0, 0.2, 0.4, 0.8, and 1.0), have been synthesized by arc-melting and characterized by powder X-ray and neutron diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All compounds crystallize in the CuFe 2 Ge 2 structure type, which can be considered as a three-dimensional framework built of fused MGe6 octahedra and MGe 5 trigonal bipyramids (M = Fe and Co), with channels filled by rows of Cu atoms. As the Co content (x) increases, the unit cell volume decreases in an anisotropic fashion: the b and c lattice parameters decrease while the a parameter increases. The changes in all the parameters are nearly linear, thus following Vegard’s law. CuFe 2 Ge 2 exhibits two successive antiferromagnetic (AFM) orderings, corresponding to the formation of a commensurate AFM structure, followed by an incommensurate AFM structure observed at lower temperatures. Additionally, as the Co content increases, the AFM ordering temperature (TN) gradually decreases, and only one AFM transition is observed for x ≥ 0.2. The magnetic behavior of unsubstituted CuFe 2 Ge 2 was found to be sensitive to the preparation method. The temperature-dependent zero-field 57 Fe Mössbauer spectra reveal two hyperfine split components that evolve in agreement with the two consecutive AFM orderings observed in magnetic measurements. In contrast, the field-dependent spectra obtained for fields ≥ 2 T reveal a parallel arrangement of the moments associated with the two crystallographically unique metal sites. Electronic band structure calculations and chemical bonding analysis reveal a mix of strong M–M antibonding and non-bonding states at the Fermi level, in support of the overall AFM ordering observed in zero field. The substitution of Co for Fe reduces the population of the M–M antibonding states and the overall density of states at the Fermi level, thus suppressing the T N value.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Autonomous Molecular Structure Imaging with High-Resolution Atomic Force Microscopy for Molecular Mixture Discovery

Due to its single-molecule sensitivity, high-resolution atomic force microscopy (HR-AFM) has proved to be a valuable and uniquely advantageous tool to study complex molecular mixtures, which hold promise for developing clean energy and achieving environmental sustainability. However, significant challenges remain to achieve the full potential of the sophisticated and time-consuming experiments. Automation combined with machine learning (ML) and artificial intelligence (AI) is key to overcoming these challenges. Here we present Auto-HR-AFM, an AI tool to automatically collect HR-AFM images of petroleum-based mixtures. In this study, we trained an instance segmentation model to teach Auto-HR-AFM how to recognize features in HR-AFM images. Auto-HR-AFM then uses that information to optimize the imaging by adjusting the probe-molecule distance for each molecule in the run. Auto-HR-AFM is the initial tool that will lead to fully automated scanning probe microscopy (SPM) experiments, from start to finish. This automation will allow SPM to become a mainstream characterization technique for complex mixtures, an otherwise unattainable target.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrical Responses of Modified Mineral Surfaces as Observed With Spectral Induced Polarization and Atomic Force Microscopy

Abstract Atomic force microscopy (AFM) and spectral induced polarization (SIP) are widely used to investigate the electrical properties of mineral surfaces at vastly different scales of measurement. We compare AFM and SIP measurements made on two different materials (glass beads and silica gel) subjected to etching, deposition of iron oxide particles, and inclusion of calcite grains. We found that the treatments produced qualitatively consistent behaviors in the AFM and SIP data. Direct AFM measurements of surface charge density for silica and calcite surfaces were quantitatively compared to values estimated from the SIP results using a grain polarization model. No statistically significant difference (at a 95% confidence level) was found between the surface charge density of silica estimated by AFM (2.3 ± 6.6 mC/m 2 for glass beads and 1.6 ± 0.1 mC/m 2 for silica gel) versus SIP (5.4 ± 4.4 mC/m 2 for glass beads and 1.6 ± 0.5 mC/m 2 for silica gel). The surface charge density for calcite determined by AFM (43.5 ± 12.9 mC/m 2 ) was approximately 19 times higher than that found for silica. While the charge density of calcite surfaces determined by SIP was also generally higher than that found for silica, different treatments produced significantly different values between 4.7 and 258 mC/m 2 (with a maximum 95% CI of ±8.7 mC/m 2 ). Several possible explanations exist for the range of the observed SIP measurements, including aging of the calcite surfaces. Overall, this study suggests the potential for the complementary use of AFM and SIP measurements to constrain future investigations of polarization mechanisms in porous media.

Geochemistry & Geophysics↗
DOE OSTI2022

Controlling Antiferromagnetic Magnon Polarization by Interfacial Exchange Interaction

We demonstrate highly efficient control of antiferromagnetic (AFM) magnon spins by the interfacial exchange interaction in heterostructures of ferrimagnetic yttrium iron garnet (YIG) and AFM Cr 2 O 3 . At low temperatures, Cr 2 O 3 is antiferromagnetically ordered. The interfacial exchange interaction exerted by YIG lifts the degeneracy between the AFM magnon modes in Cr 2 O 3 , resulting in a net spin polarization and a spin current dominated by left-handed magnons, even at zero magnetic field, which is detected by the spin Seebeck effect with a 5-nm-thick Pt film. In the AFM magnon-dominated region, even if the magnetic field is not sufficiently strong to induce the spin-flop transition in Cr 2 O 3 , the total spin Seebeck signal polarity flips when the YIG magnetization switches. It clearly indicates that the Cr 2 O 3 magnon polarization is controlled by YIG magnetization through the interfacial exchange interaction. The demonstration of the efficient control of AFM magnon polarization opens a pathway to manipulate AFM magnon quantum states using FM-AFM heterostructures.

42 ENGINEERING↗
DOE OSTI2020

Impact of nematicity on the relationship between antiferromagnetic fluctuations and superconductivity in FeSe 0.91 S 0.09 under pressure

The sulfur-substituted FeSe system, FeSe 1 - x S x , provides a versatile platform for studying the relationship among nematicity, antiferromagnetism, and superconductivity. Herein, by nuclear magnetic resonance (NMR) and resistivity measurements up to 4.73 GPa on FeSe 0.91 S 0.09 , we established the pressure- ( p -) temperature ( T ) phase diagram in which the nematic state is suppressed with pressure showing a nematic quantum phase transition (QPT) around p = 0.5 GPa , two superconductivity (SC) regions separated by the QPT appear, and antiferromagnetic (AFM) phase emerges above ~ 3.3 GPa . From the NMR results up to 2.1 GPa, AFM fluctuations are revealed to be characterized by the stripe-type wave vector which remains the same for the two SC regions. Furthermore, the electronic state is discovered to change in character from non-Fermi liquid to Fermi liquid around the nematic QPT and persists up to ~ 2.1 GPa . In addition, although the AFM fluctuations correlate with T c in both SC states, demonstrating the importance of the AFM fluctuations for the appearance of SC in the system, we found that, when nematic order is absent, T c is strongly correlated with the AFM fluctuations whereas T c weakly depends on the AFM fluctuations when nematic order is present. Our findings on FeSe 0.91 S 0.09 were shown to be applied to the whole FeSe 1 - x S x system and offer an insight into the relationship between AFM fluctuations and SC in Fe-based superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electron transport through antiferromagnetic spin textures and skyrmions in a magnetic tunnel junction

An ideal layered $\hat{x}$-polarized antiferromagnet (AFM) between two antialigned $±\hat{z}$ polarized ferromagnetic (FM) contacts transmits no current due to a π phase difference of the matrix elements coupling the spin degenerate states to the two FM contacts. Inserting a normal-metal layer or tunnel barrier layer between one FM contact and the AFM alters this phase difference, and due to the unequal weighting of the two spins at the interface, it also breaks the spin degeneracy of the two AFM states. Further, the broken symmetry of the matrix elements combined with the broken degeneracy of the AFM states results in a Fano resonance in the transmission and a turn-on of the $T_{↑,↓}$ transmission channel. Such a magnetic tunnel junction geometry with two antialigned $±\hat{z}$ FM contacts can electrically detect an AFM skyrmion. The AFM skyrmion serves as an analog of the oblique polarizer in the triple-polarizer experiment. Resistances and resistance ratios are calculated and compared for FM and AFM skyrmions in a magnetic tunnel junction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Thermodynamic signatures of an antiferromagnetic quantum critical point inside a superconducting dome

Recent experiments in unconventional superconductors, and in particular iron-based materials, have reported evidence of an antiferromagnetic quantum critical point (AFM-QCP) emerging inside the superconducting dome of the phase diagram. Fluctuations associated with such an AFM-QCP are expected to promote unusual temperature dependencies of thermodynamic quantities. Here, we compute the T dependence of the specific heat C(T) deep inside a fully gapped s +– superconducting state as the AFM-QCP is approached. We find that at the AFM-QCP, the specific heat C(T) vanishes quadratically with temperature, as opposed to the typical exponential suppression seen in fully gapped BCS superconductors. This robust result is due to a nonanalytic contribution to the free energy arising from the general form of the bosonic (AFM) propagator in the SC state. Away from the AFM-QCP, as temperature is lowered, C(T) shows a crossover from a T2 behavior to an exponential behavior, with the crossover temperature scale set by the value of the superconducting gap and the distance to the QCP. As a result, we argue that these features in the specific heat can be used to unambiguously determine the existence of AFM-QCPs inside the superconducting domes of iron-based and other fully gapped unconventional superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Incommensurate and commensurate antiferromagnetic states in Ca Mn 2 As 2 and Sr Mn 2 As 2 revealed by As 75 NMR

Here, we carried out 75 As nuclear magnetic resonance (NMR) measurements on the trigonal CaMn 2 As 2 and SrMn 2 As 2 insulators exhibiting antiferromagnetic (AFM) ordered states below Néel temperatures T N = 62 and 120 K, respectively. In the paramagnetic state above T N , typical quadrupolar-split 75 As NMR spectra were observed for both systems. The 75 As quadrupolar frequency ν Q for CaMn 2 As 2 decreases with decreasing temperature, while ν Q for SrMn 2 As 2 increases, showing an opposite temperature dependence. In the AFM state, the relatively sharp and distinct 75 As NMR lines were observed in SrMn 2 As 2 and the NMR spectra were shifted to lower fields for both magnetic fields H ∥ c axis and H ∥ a b plane, suggesting that the internal fields B int at the As site produced by the Mn ordered moments are nearly perpendicular to the external magnetic field direction. No obvious distribution of B int was observed in SrMn 2 As 2 , which clearly indicates a commensurate AFM state. In sharp contrast to SrMn 2 As 2 , broad and complex NMR spectra were observed in CaMn 2 As 2 in the AFM state, which clearly shows a distribution of B int at the As site, indicating an incommensurate state. From the analysis of the characteristic shape of the observed spectra, the AFM state of CaMn 2 As 2 was determined to be a two-dimensional incommensurate state where Mn ordered moments are aligned in the ab plane. A possible origin for the different AFM states in the systems was discussed. Both CaMn 2 As 2 and SrMn 2 As 2 show very large anisotropy in the nuclear spin-lattice relaxation rate 1/T 1 in the paramagnetic state. 1/T 1 for H ∥ ab is much larger than that for H ∥ c, indicating strong anisotropic AFM spin fluctuations in both compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Canted antiferromagnetic phases in the candidate layered Weyl material EuMnSb 2

EuMnSb 2 is a candidate topological material which can be tuned towards a Weyl semimetal, but there are differing reports for its antiferromagnetic (AFM) phases. The coupling of bands dominated by pure Sb layers hosting topological fermions to Mn and Eu magnetic states provides a potential path to tune the topological properties. In this study we present single-crystal neutron diffraction, magnetization, and heat-capacity data as well as polycrystalline 151 Eu Mössbauer data which show that three AFM phases exist as a function of temperature, and we present a detailed analysis of the magnetic structure in each phase. The Mn magnetic sublattice orders into a C-type AFM structure below T N Mn = 323 (1) K with the ordered Mn magnetic moment μ Mn lying perpendicular to the layers. AFM ordering of the Eu sublattice occurs below T N Eu1 = 23 (1) K with the ordered Eu magnetic moment μ Eu canted away from the layer normal and μ Mn retaining its higher temperature order. μ Eu is ferromagnetically aligned within each Eu layer but exhibits a complicated AFM layer stacking. Both of these higher-temperature phases are described by magnetic space group (MSG) $\mathcal{Pn'm'a'}$ with the chemical and magnetic unit cells having the same dimensions. Cooling below T N Eu2 =9 (1) K reveals a third AFM phase where μ Mn remains unchanged but μ Eu develops an additional substantial in-plane canting. This phase has MSG $\mathcal{P11}$ $\frac{2_1}{a′}$. We also find some evidence of short-range magnetic correlations associated with the Eu between 12 K≲ T≲ 30 K . Using the determined magnetic structures, we postulate the signs of nearest-neighbor intralayer and interlayer exchange constants and the magnetic anisotropy within a general Heisenberg model. We then discuss implications of the various AFM states in EuMnSb 2 and their potential for tuning topological properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Multiple magnetic interactions and large inverse magnetocaloric effect in TbSi and TbSi 0.6 Ge 0.4

We present a comprehensive investigation of the electronic structure, magnetization, specific heat, and crystallography of TbSi (FeB structure type) and TbSi 0.6 ⁢Ge 0.4 (CrB structure type) compounds. Both TbSi and TbSi 0.6 ⁢Ge 0.4 exhibit two antiferromagnetic (AFM) transitions at T N⁢1 ≈ 58 and 57 K, and T N⁢2 ≈ 36 and 44 K, respectively, along with an onset of weak metamagneticlike transition around 6 T between T N⁢1 and T N⁢2 . High-resolution specific heat (C P ) measurements show the second- and first-order nature of the magnetic transition at T N⁢1 and T N⁢2 , respectively, for both samples. However, in the case of TbSi, the low-temperature (LT) AFM to high-temperature (HT) AFM transition takes place via an additional AFM phase at the intermediate temperature (IT), where both LT to IT AFM and IT to HT AFM phase transitions exhibit a first-order nature. Both TbSi and TbSi 0.6 ⁢Ge 0.4 manifest significant magnetic entropy changes (Δ⁢S M ) of 9.6 and 11.6 J/kg-K, respectively, for Δ⁢μ 0 ⁢H=7 T, at T N⁢2 . The HT AFM phase of TbSi 0.6 ⁢Ge 0.4 is found to be more susceptible to the external magnetic field, causing a significant broadening in the peaks of Δ⁢S M curves at higher magnetic fields. Temperature- and field-dependent specific-heat data have been utilized to construct the complex HT phase diagram of these compounds. As a result, temperature-dependent x-ray diffraction measurements demonstrate substantial magnetostriction and anisotropic thermal expansion of the unit cell in both samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Spin-flop coupling at L⁢a 0.5 ⁢S⁢r 0.5 ⁢Fe⁢O 3 /L⁢a 0.7⁢ S⁢r 0.3 ⁢Mn⁢O 3 interfaces

Antiferromagnetic (AFM) spintronics offer several benefits compared to their ferromagnetic (FM) counterparts, such as high storage capacity and faster processing speed, however, difficulties in manipulating and detecting the AFM moments impede their implementation. Spin-flop coupling, the interfacial perpendicular coupling between FM and AFM moments, can be utilized to control the orientation of AFM moments with the application of moderate magnetic fields on the scale of tenths of a Tesla. Here, in this work, epitaxial bilayers of AFM La 0.5 Sr 0.5 FeO 3 (LSFO)/FM La 0.7 Sr 0.3 MnO 3 (LSMO) with fixed LSMO thickness (~85 u.c.) and LSFO thicknesses varying from 10 to 50 u.c. were investigated to determine the effect of Sr doping and La 1-x Sr x FeO 3 magnetocrystalline anisotropy on the strength of spin-flop coupling. X-ray magnetic linear dichroism demonstrated that the spin-flop coupling strength decreased with increasing LSFO layer thickness, persisting at a thickness of 50 u.c. (~20 nm). Furthermore, photoemission electron microscopy revealed a domain-by-domain correlation between the FM and AFM domains consistent with the perpendicular orientation dictated by spin-flop coupling. These results demonstrate that LSFO/LSMO bilayers have the potential to serve as a model materials system for AFM spin transport measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Density functional theory investigations into the magnetic ordering of U 3 O 8

Density functional theory (DFT) has been highly successful in supporting experimental materials science; however, a correct electronic ground state is required to realize the full theoretical capacity of DFT. The uranium oxides, α–U 3 O 8 in particular, are simultaneously technologically important materials and theoretically challenging for DFT because the uranium magnetic ground state is not obvious. This is true for both experiment and theory—magnetic susceptibility measurements indicate an antiferromagnetic (AFM) ground state with transitions near 4.2 and 8.0 K, but the ordering itself is not known. Theoretical literature reports are in contradiction, with independent studies finding paramagnetic, ferromagnetic (FM), and AFM states as the lowest energy configuration. However, recent inelastic neutron scattering experiments suggested an uninvestigated magnetic structure with ordering along the [0.5 1 1] plane, motivating a theoretical reinvestigation. Using this insight, we calculated the relative energy of FM and AFM orderings along [0.5 1 1], [0.5 0 0], [0 1 0], and [0 0 1] using noncollinear DFT calculations with spin-orbital coupling. In this work, we found that the [0.5 1 1] AFM structure is lower in energy than FM or AFM orderings along the low Miller index directions. We also investigated polarization of the magnetic moment along each lattice vector and found that polarization along the out-of-plane direction is the energetically preferred orientation for the AFM structures. Additionally, we found in all calculations that moments initially pointing along the in-plane lattice vectors significantly relax until they point along the coordinate between the two crystallographically distinct uranium sites with complex noncollinear magnetic configurations. The new [0.5 1 1] AFM magnetic structure provides an additional path forward toward understanding the electronic structure of α-U 3 O 8 and lends theoretical credibility to recent neutron scattering results.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamics and Formation of Antiferromagnetic Textures in MnBi 2 Te 4 Single Crystal

We report coherent X-ray imaging of antiferromagnetic (AFM) domains and domain walls in MnBi 2 Te 4 , an intrinsic AFM topological insulator. This technique enables direct visualization of domain morphology without reconstruction algorithms, allowing us to resolve antiphase domain walls as distinct dark lines arising from the A-type AFM structure. The wall width is determined to be 550(30) nm, in good agreement with earlier magnetic force microscopy results. The temperature dependence of the AFM order parameter extracted from our images closely follows previous neutron scattering data. Remarkably, however, we find a pronounced hysteresis in the evolution of domains and domain walls: upon cooling, dynamic reorganizations occur within a narrow ∼1 K interval below 𝑇 𝑁 , whereas upon warming, the domain configuration remains largely unchanged until AFM order disappears. These findings reveal a complex energy landscape in MnBi 2 Te 4 , governed by the interplay of exchange, anisotropy, and domain-wall energies, and underscore the critical role of AFM domain-wall dynamics in shaping its physical properties. These sharply defined and hysteretically evolving walls may provide a controllable AFM texture in MnBi 2 Te 4 , hinting at potential use in low-power spintronic devices based on domain-wall dynamics.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Microfluidics, Chromatography, and Atomic-Force Microscopy

A Raman-and-atomic-force microscope (RAFM) has been shown to be capable of performing several liquid-transfer and sensory functions essential for the operation of a microfluidic laboratory on a chip that would be used to perform rapid, sensitive chromatographic and spectro-chemical analyses of unprecedentedly small quantities of liquids. The most novel aspect of this development lies in the exploitation of capillary and shear effects at the atomic-force-microscope (AFM) tip to produce shear-driven flow of liquids along open microchannels of a microfluidic device. The RAFM can also be used to perform such functions as imaging liquids in microchannels; removing liquid samples from channels for very sensitive, tip-localized spectrochemical analyses; measuring a quantity of liquid adhering to the tip; and dip-pen deposition from a chromatographic device. A commercial Raman-spectroscopy system and a commercial AFM were integrated to make the RAFM so as to be able to perform simultaneous topographical AFM imaging and surface-enhanced Raman spectroscopy (SERS) at the AFM tip. The Raman-spectroscopy system includes a Raman microprobe attached to an optical microscope, the translation stage of which is modified to accommodate the AFM head. The Raman laser excitation beam, which is aimed at the AFM tip, has a wavelength of 785 nm and a diameter of about 5 m, and its power is adjustable up to 10 mW. The AFM is coated with gold to enable tip-localized SERS.

Anderson, Mark↗
DOE OSTI2025

Non-volatile electric control of antiferromagnetic states on nanosecond timescales

Electrical manipulation of antiferromagnetic (AFM) states, a cornerstone of AFM spintronics, is a great challenge, requiring novel material platforms. Here we report the full control over AFM states by voltage pulses in the insulating Co 3 O 4 spinel well below its Néel temperature. We show that the strong linear magnetoelectric effect is fully governed by the orientation of the Néel vector. As a unique feature of Co 3 O 4 , the magnetoelectric energy can easily overcome the weak magnetocrystalline anisotropy, thus, the N´eel vector can be manipulated on demand, either rotated smoothly or reversed suddenly, by combined electric and magnetic fields. We achieve the non-volatile switching within a few tens of nanoseconds between time-reversed AFM states in macroscopic volumes by voltage pulses. These observations render quasi-cubic antiferromagnets, like Co 3 O 4 , an ideal platform for the ultrafast (pico- to nanosecond) manipulation of microscopic AFM domains and may pave the way for the realization of AFM spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrically Controlled All-Antiferromagnetic Tunnel Junctions on Silicon with Large Room-Temperature Magnetoresistance

Antiferromagnetic (AFM) materials are a pathway to spintronic memory and computing devices with unprecedented speed, energy efficiency, and bit density. Realizing this potential requires AFM devices with simultaneous electrical writing and reading of information, which are also compatible with established silicon-based manufacturing. Recent experiments have shown tunneling magnetoresistance (TMR) readout in epitaxial AFM tunnel junctions. However, these TMR structures are not grown using a silicon-compatible deposition process, and controlling their AFM order required external magnetic fields. Here are shown three-terminal AFM tunnel junctions based on the noncollinear antiferromagnet PtMn 3 , sputter-deposited on silicon. The devices simultaneously exhibit electrical switching using electric currents, and electrical readout by a large room-temperature TMR effect. First-principles calculations explain the TMR in terms of the momentum-resolved spin-dependent tunneling conduction in tunnel junctions with noncollinear AFM electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Confinement of quasi-atomic structures in Ti 2 N and Ti 3 N 2 MXene electrides

Metal carbides, nitrides, or carbonitrides of early transition metals, better known as MXenes, possess notable structural, electrical, and magnetic properties. Analyzing electronic structures by calculating structural stability, band structure, density of states, Bader charge transfer, and work functions utilizing first principle calculations, we revealed that titanium nitride MXenes, namely Ti 2 N and Ti 3 N 2 , have excess anionic electrons in their lattice voids, making them MXene electrides. Bulk Ti 3 N 2 has competing antiferromagnetic (AFM) and ferromagnetic (FM) configurations with slightly more stable AFM configuration, while the Ti 2 N MXene is nonmagnetic. Although Ti 3 N 2 favors AFM configuration with hexagonal crystal systems having 6/ mmm point group symmetry, Ti 3 N 2 does not support altermagnetism. The monolayer of the Ti 3 N 2 MXene is a ferromagnetic electride. These unique properties of having non-nuclear interstitial anionic electrons in the electronic structure of titanium nitride MXene have not yet been reported in the literature. Density functional theory calculations show TiN is neither an electride, MXene, or magnetic.

Anionic electrons↗
DOE OSTI2021

Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review

Understanding geomechanical properties of shales, such as stiffness properties and fracture toughness, is important in different areas of petroleum industry-related activities. Nanoscale to microscale experiments on shale samples require a much smaller sample compared to macroscale experiments. This is a major advantage because irregularly-shaped drill cuttings from shales can be used for experimental analyses, such as nanoindentation or atomic force microscopy (AFM). However, characterization of mechanical properties at the nano- to micro-scale is a relatively new addition to classical geomechanical experiments on shales, and there is still a lack of both fundamental knowledge and standard procedures for conducting experiments at this scale. The theoretical principles of nanoindentation-based (Gridded Nanoindentation and Modulus Mapping) and AFM-based experimental methods (PeakForce QNMTM and AFM-IR), a review of the literature results and the major findings are explained in Sections 2 and 3, respectively. These experimental techniques are compared in Section 4. Overall, nanoindentation experiments reveal the anisotropy of organic matter (OM)-rich shales at the nanoscale, and it is shown that gridded nanoindentation is capable of characterizing different minerals with respect to their stiffness properties. The capability of AFM (PeakForce QNMTM) to differentiate between different minerals within OM-rich shales with distinct mechanical properties, in particular stiffness, is also demonstrated. It is shown that AFM-based methods are more straightforward than gridded-nanoindentation to characterize OM-rich shales based on the stiffness of different constituent minerals of OM-rich shales, but nanoindentation can apply higher loads than AFM-based methods. Therefore, they can measure creep properties and fracture toughness of OM-rich shales. Here, it is shown that the OM is the most compliant part of the OM-rich shales, but it is still unclear if thermal maturation has an impact on the stiffness of OM. It is necessary to investigate if there is a relationship between the OM type (kerogen, bitumen, etc.) and mechanical properties such as Young’s modulus and Creep rate.

36 MATERIALS SCIENCE↗