Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIRCRAFT DETECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Expanded envelope concepts for aircraft control-element failure detection and identification

The purpose of this effort was to develop and demonstrate concepts for expanding the envelope of failure detection and isolation (FDI) algorithms for aircraft-path failures. An algorithm which uses analytic-redundancy in the form of aerodynamic force and moment balance equations was used. Because aircraft-path FDI uses analytical models, there is a tradeoff between accuracy and the ability to detect and isolate failures. For single flight condition operation, design and analysis methods are developed to deal with this robustness problem. When the departure from the single flight condition is significant, algorithm adaptation is necessary. Adaptation requirements for the residual generation portion of the FDI algorithm are interpreted as the need for accurate, large-motion aero-models, over a broad range of velocity and altitude conditions. For the decision-making part of the algorithm, adaptation may require modifications to filtering operations, thresholds, and projection vectors that define the various hypothesis tests performed in the decision mechanism. Methods of obtaining and evaluating adequate residual generation and decision-making designs have been developed. The application of the residual generation ideas to a high-performance fighter is demonstrated by developing adaptive residuals for the AFTI-F-16 and simulating their behavior under a variety of maneuvers using the results of a NASA F-16 simulation.

Weiss, Jerold L.↗
NASA NTRS2004

Understanding Fire Through Improved Technology

Aztec(TradeMark) is the commercial name for Southwest Sciences laser. The laser has coarse tuning ranges of 10 nanometers (nm) to 30 nm at wavelengths ranging from 630 nm to 2,300 nm, making it the only commercially available external cavity diode laser with wavelengths beyond 1,650 nm. The laser's high-speed tuning in both coarse and fine wavelength regimes allows for increased trace gas detection. With the automated coarse tuning option, the Aztec sweeps through its wavelength range in less than 1 millisecond. While some diode lasers can only detect one type, or species, of a trace gas, the Aztec's broad wavelength tuning provides access to multiple trace gas species. The Aztec has a wide range of applications for both NASA and commercial users, from protecting astronauts in space to improving combustion processes on Earth. It may serve as a new tool for planetary exploration, as it can detect a wide range of multiple gas species in planetary atmospheres. The laser could optically detect gaseous indicators of incipient fires on the International Space Station and Space Shuttle, as well as detect low concentrations of potentially toxic gases in spacecraft crew habitats. The laser could also provide more accurate fire detection in aircraft cargo compartments. Since the Aztec can detect several gases that only evolve during an actual fire, its implementation could reduce the large number of commercial aircraft landings that currently occur due to false alarms. Other applications include environmental and industrial process monitoring.

Source record↗
NASA NTRS1986

Geostationary microwave imagers detection criteria

Geostationary orbit is investigated as a vantage point from which to sense remotely the surface features of the planet and its atmosphere, with microwave sensors. The geometrical relationships associated with geostationary altitude are developed to produce an efficient search pattern for the detection of emitting media and metal objects. Power transfer equations are derived from the roots of first principles and explain the expected values of the signal-to-clutter ratios for the detection of aircraft, ships, and buoys and for the detection of natural features where they are manifested as cold and warm eddies. The transport of microwave power is described for modeled detection where the direction of power flow is explained by the Zeroth and Second Laws of Thermodynamics. Mathematical expressions are derived that elucidate the detectability of natural emitting media and metal objects. Signal-to-clutter ratio comparisons are drawn among detectable objects that show relative detectability with a thermodynamic sensor and with a short-pulse radar.

Stacey, J. M.↗
NASA NTRS1976

Wind shear detection using measurement of aircraft total energy change

Encounters with wind shears are of concern and have caused major accidents, particularly during landing approaches. Changes in the longitudinal component of the wind affect the aircraft by changing its kinetic energy with respect to the air. It is shown that an instrument which will measure and display the rate of change of total energy of the aircraft with respect to the air will give a leading indication of wind shear problems. The concept is outlined and some instrumentation and display considerations are discussed.

Joppa, R. G.↗
NASA NTRSDate not supplied

Loss of Control Detection for Commercial Transport Aircraft Using Conditional Variational Autoencoders

This work describes a detector for the loss of control condition of a commercial transport in flight. The detector has a belief state defined by the latent variable stochastic modeling of a conditional variational autoencoder (CVAE) constructed with bidirectional recurrent layers. In 2000, the Boeing Company and the NASA Langley Research Center jointly developed a quantitative set of metrics for defining loss-of-control (LOC) for a commercial transport. We use the thresholds for these quantitative metrics to define a condition vector for training the CVAE. First, we demonstrate through experimentation that reconstruction probability is an accurate indicator that the vehicle has shifted to an LOC state. Second, we introduce a technique for inferring that the vehicle is approaching a flight state change by measuring a shift in the sampling distributions of the CVAE latent space. The sampling distributions for flight observations that are approaching envelope limits are localized to external areas of the latent space. We provide an analysis of its applicability to flight data from NASA’s dynamically-scaled generic transport model (GTM) aircraft.

Loss of control↗
NASA NTRS2003

Detecting the Use of Intentionally Transmitting Personal Electronic Devices Onboard Commercial Aircraft

The need to detect unauthorized usage of intentionally transmitting portable electronic devices (PEDs) onboard commercial aircraft is growing, while still allowing passengers to use selected unintentionally transmitting devices, such as laptop computers and CD players during non-critical stages of flight. The following paper presents an installed system for detecting PEDs over multiple frequency bands. Additionally, the advantages of a fixed verses mobile system are discussed. While data is presented to cover the frequency range of 20 MHz to 6.5 GHz, special attention was given to the Cellular/PCS bands as well as Bluetooth and the FRS radio bands. Measurement data from both the semi-anechoic and reverberation chambers are then analyzed and correlated with data collected onboard a commercial aircraft to determine the dominant mode of coupling inside the passenger cabin of the aircraft versus distance from the source. As a final check of system feasibility, several PEDs transmission signatures were recorded and compared with the expected levels.

Woods, Randy↗
NASA NTRS2009

Aircraft Flight Envelope Determination using Upset Detection and Physical Modeling Methods

The development of flight control systems to enhance aircraft safety during periods of vehicle impairment or degraded operations has been the focus of extensive work in recent years. Conditions adversely affecting aircraft flight operations and safety may result from a number of causes, including environmental disturbances, degraded flight operations, and aerodynamic upsets. To enhance the effectiveness of adaptive and envelope limiting controls systems, it is desirable to examine methods for identifying the occurrence of anomalous conditions and for assessing the impact of these conditions on the aircraft operational limits. This paper describes initial work performed toward this end, examining the use of fault detection methods applied to the aircraft for aerodynamic performance degradation identification and model-based methods for envelope prediction. Results are presented in which a model-based fault detection filter is applied to the identification of aircraft control surface and stall departure failures/upsets. This application is supported by a distributed loading aerodynamics formulation for the flight dynamics system reference model. Extensions for estimating the flight envelope due to generalized aerodynamic performance degradation are also described.

Keller, Jeffrey D.↗
NASA NTRS2003

Flight Test Results for a Turbulence Detection Radar

This viewgraph presentation provides an overview of flight tests conducted on an aircraft turbulence detection radar system. Topics covered include: flight operations summary, radar data collection, baseline algorithm methodology, radar hazard tables and proposed alert criteria. Flight tests results are presented and summarized. Data analysis from these flight tests are also included.

Schaffner, Phil↗
NASA NTRS2009

Dynamic Structural Fault Detection and Identification

Aircraft structures are designed to guarantee safety of flight in some required operational envelope. When the aircraft becomes structurally impaired, safety of flight may not be guaranteed within that previously safe operational envelope. In this case the safe operational envelope must be redefined in-flight and a means to prevent excursion from this new envelope must be implemented. A specific structural failure mode that may result in a reduced safe operating envelope, the exceedance of which could lead to catastrophic structural failure of the aircraft, will be addressed. The goal of the DFEAP program is the detection of this failure mode coupled with flight controls adaptation to limit critical loads in the damaged aircraft structure. The DFEAP program is working with an F/A-18 aircraft model. The composite wing skins are bonded to metallic spars in the wing substructure. Over time, it is possible that this bonding can deteriorate due to fatigue. In this case, the ability of the wing spar to transfer loading between the wing skins is reduced. This failure mode can translate to a reduced allowable compressive strain on the wing skin and could lead to catastrophic wing buckling if load limiting of the wing structure is not applied. The DFEAP program will make use of a simplified wing strain model for the healthy aircraft. The outputs of this model will be compared in real-time to onboard strain measurements at several locations on the aircraft wing. A damage condition is declared at a given location when the strain measurements differ sufficiently from the strain model. Parameter identification of the damaged structure wing strain parameters will be employed to provide load limiting control adaptation for the aircraft. This paper will discuss the simplified strain models used in the implementation and their interaction with the strain sensor measurements. Also discussed will be the damage detection and identification schemes employed and the means by which the damaged aircraft parameters will be used to provide load limiting that keeps the aircraft within the safe operational envelope.

Smith, Timothy↗
NASA NTRS1991

Continuous wave laser for wind shear detection

Details of the design and development of a continuous-wave heterodyne carbon dioxide laser which has wind shear detection capabilities are given in viewgraph form. The goal of the development was to investigate the lower cost CW (rather than pulsed) lidar option for look-ahead wind shear detection from aircraft. The device has potential utility for ground based wind shear detection at secondary airports where the high cost of a Terminal Doppler Weather Radar system is not justifiable.

Nelson, Loren↗
NASA NTRS1985

A preliminary evaluation of a failure detection filter for detecting and identifying control element failures in a transport aircraft

The application of the failure detection filter to the detection and identification of aircraft control element failures was evaluated in a linear digital simulation of the longitudinal dynamics of a B-737 Aircraft. Simulation results show that with a simple correlator and threshold detector used to process the filter residuals, the failure detection performance is seriously degraded by the effects of turbulence.

Bundick, W. T.↗
NASA NTRS2017

Ensuring Interoperability between UAS Detect-and-Avoid and Manned Aircraft Collision Avoidance

The UAS community in the United States has identified the need for a collision avoidance region in which UAS Detect-and-Avoid (DAA) vertical guidance is restricted to preclude interoperability issues with manned aircraft collision avoidance system vertical resolution advisories (RAs). This paper documents the process by which the collision avoidance region was defined. Three candidate definitions were evaluated on 1.3 million simulated pairwise encounters between UAS and manned aircraft covering a wide range of horizontal and vertical closure rates, angles, and miss distances. They were evaluated with regard to UAS DAA interoperability with manned aircraft collision avoidance systems in terms of: 1) the primary objective of restricting DAA vertical guidance before RAs when the aircraft are close, and 2) the secondary objective of avoiding unnecessary restrictions of DAA vertical guidance at a DAA alert when the aircraft are further apart. The collision avoidance region definition that fully achieves the primary objective and best achieves the secondary objective was recommended to and accepted by the UAS community in the United States. By this definition, UAS and manned aircraft are in the collision avoidance region--during which DAA vertical guidance is restricted--when the time to closest point of approach is less than 50 seconds and either the time to co-altitude is less than 50 seconds or the current vertical separation is less than 800 feet.

collision avoidance↗
NASA NTRSDate not supplied

The Viability of See and Avoid for Urban Air Mobility Operations

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRSDate not supplied

The Viability of See-and-Avoid for Midair Collision Avoidance for UAM

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRSDate not supplied

The Viability of See-and-Avoid for Midair Collision Avoidance for Urban Air Mobility (UAM)

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRS2023

The Viability of See-and-Avoid for Urban Air Mobility Operations

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRS2017

The Effects of Severity of Losses of Well Clear on Minimum Operations Performance Standards End-To-End Verification and Validation Simulation Study for Integrating Unmanned Aircraft Systems into the National Airspace System Using Detect and Avoid Systems

As Unmanned Aircraft Systems (UAS) make their way to mainstream aviation operations within the National Airspace System (NAS), research efforts are underway to develop a safe and effective environment for their integration into the NAS. Detect and Avoid (DAA) systems are required to account for the lack of “eyes in the sky” due to having no human on-board the aircraft. The technique, results, and lessons learned from a detailed End-to-End Verification and Validation (E2-V2) simulation study of a DAA system representative of RTCA Special Committee(SC)-228’s proposed Phase I DAA Minimum Operational Performance Standards (MOPS), based on specific test vectors and encounter cases, will be presented in this paper.

Ghatas, Rania W.↗
NASA NTRS1995

In situ observations in aircraft exhaust plumes in the lower stratosphere at midlatitudes

Instrumentation on the NASA ER-2 high-altitude aircraft has been used to observe engine exhaust from the same aircraft while operating in the lower stratosphere. Encounters with the exhaust plume occurred approximately 10 min after emission with spatial scales near 2 km and durations of up to 10 s. Measurements include total reactive nitrogen, NO(y), the component species NO and NO2, CO2, H2O, CO, N2O, condensation nuclei, and meteorological parameters. The integrated amounts of CO2 and H2O during the encounters are consistent with the stoichiometry of fuel combustion (1:1 molar). Emission indices (EI) for NO(x) (= NO + NO2), CO, and N2O are calculated using simultaneous measurements of CO2. EI values for NO(x) near 4 g/(kg fuel) are in good agreement with values scaled from limited ground-based tests of the ER-2 engine. Non-NO(x) species comprise less than about 20% of emitted reactive nitrogen, consistent with model evaluations. In addition to demonstrating the feasibility of aircraft plume detection, these results increase confidence in the projection of emissions from current and proposed supersonic aircraft fleets and hence in the assessment of potential long-term changes in the atmosphere.

Fahey, D. W.↗