Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMMONIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Analytical Approach for Detection of Ergosterol in Mushrooms Based on Modification Free Electrochemical Sensor in Organic Solvents

Ergosterol (Erg) is the major sterol component in the plasma membranes of fungi. The main goal of this work was to develop rapid, reliable, and cost-effective method toward Erg detection based on application of unmodified boron-doped diamond electrode. Several organic solvents were tested (acetonitrile, dimethyformamide, dimethylsulfoxide, dichloromethane), and it was found that best analytical characteristics were achieved using acetonitrile containing 0.1 M tetrabutylammonium hexa-fluorophosphate as supporting electrolyte. Oval shaped and well-defined oxidation peak was recorded at potential of around 1.17 V versus Ag/Ag+ non-aqueous reference electrode. Under optimized experimental conditions, linear working range from 2 to 200 mu M was estimated, with limit of detection of 0.7 mu M, using square wave voltammetry. Negligible effect of possible interfering compound was observed. Proposed methodology was successfully applied for estimation of Erg content in mushrooms extract with satisfactory results in comparison with spectrophotometric procedure. Obtained results clearly show that developed analytical methodology can be adequate replacement for the, up to date, used methods and open-novel approach for ergosterol detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The importance of SO{sub 2} and SO{sub 3} for sulphation of gaseous KCl - An experimental investigation in a biomass fired CFB boiler

This paper is based on results obtained during co-combustion of wood pellets and straw in a 12 MW circulating fluidised bed (CFB) boiler. Elemental sulphur (S) and ammonium sulphate ((NH{sub 4}){sub 2}SO{sub 4}) were used as additives to convert the alkali chlorides (mainly KCl) to less corrosive alkali sulphates. Their performance was then evaluated using several measurement tools including, IACM (on-line measurements of gaseous alkali chlorides), a low-pressure impactor (particle size distribution and chemical composition of extracted fly ash particles), and deposit probes (chemical composition in deposits collected). The importance of the presence of either SO{sub 2} or SO{sub 3} for gas phase sulphation of KCl is also discussed. Ammonium sulphate performed significantly better than elemental sulphur. A more efficient sulphation of gaseous KCl was achieved with (NH{sub 4}){sub 2}SO{sub 4} even when the S/Cl molar ratio was less than half compared to sulphur. Thus the presence of gaseous SO{sub 3} is of greater importance than that of SO{sub 2} for the sulphation of gaseous KCl. (author)

09 BIOMASS FUELS↗

PbMn(SO{sub 4}){sub 2}: A new chiral antiferromagnet

PbMn(SO{sub 4}){sub 2} has been synthesized in an evacuated quartz tube. The nuclear and magnetic crystal structures have been determined using powder X-ray and neutron diffraction. This material crystallizes in the enantiomorphic space group pair P4{sub 1}2{sub 1}2(92) and P4{sub 3}2{sub 1}2(96), forming a double-helical arrangement of Pb{sup 2+} and Mn{sup 2+} cations. The Mn{sup 2+}O{sub 6} octahedra are distorted. Each 3d{sup 5} Mn{sup 2+} has four nearest-neighbors and four next-nearest-neighbors adopting a frustrating arrangement. The compound orders antiferromagnetically at 5.5 K. Field dependent specific heat and magnetization measurements show that T{sub N} is suppressed to 3.3 K when mu{sub 0}H=9 T. - Graphical abstract: PbMn(SO{sub 4}){sub 2} crystallizes with chiral symmetry, forming a double-helical arrangement of Pb{sup 2+} and Mn{sup 2+} cations. It orders antiferromagnetically at 5.5 K and shows signs of magnetic frustration.

36 MATERIALS SCIENCE↗

A high-pressure route to thermoelectrics with low thermal conductivity: The solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2} (x=0.1–0.6)

Metastable rocksalt-type phases of the solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2} (x=0.1, 0.2, 0.4, 0.5 and 0.6) were prepared by high-pressure synthesis at 2.5 GPa and 400 °C. In these structures, the coordination number of In{sup 3+} is six, in contrast to chalcopyrite ambient-pressure AgInTe{sub 2} with fourfold In{sup 3+} coordination. Transmission electron microscopy shows that real-structure phenomena and a certain degree of short-range order are present, yet not very pronounced. All three cations are statistically disordered. The high degree of disorder is probably the reason why AgIn{sub x}Sb{sub 1−x}Te{sub 2} samples with 0.4<x<0.6 exhibit very low thermal conductivities with a total κ<0.5 W/K m and a lattice contribution of κ{sub ph} ∼0.3 W/K m at room temperature. These are lower than those of other rocksalt-type tellurides at room temperature; e.g. the well-known thermoelectric AgSbTe{sub 2} (κ ∼0.6 W/K m). The highest ZT value (0.15 at 300 K) is observed for AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}, mainly due to its high Seebeck coefficient of 160 µV/K. Temperature-dependent X-ray powder patterns indicate that the solid solutions are metastable at ambient pressure. At 150 °C, the quaternary compounds decompose into chalcopyrite-type AgInTe{sub 2} and rocksalt-type AgSbTe{sub 2}. - Graphical abstract: Reaction scheme, temperature characteristics of the ZT value and a selected-area electron diffraction pattern (background) of AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}, which crystallizes in a rocksalt-type structure with statistical cation disorder. Display Omitted - Highlights: • High-pressure synthesis yields the novel solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2}. • In contrast to AgInTe{sub 2}, the compounds are inert at ambient pressure. • HRTEM shows no pronounced short-range order in the disordered NaCl-type structure. • The metastable phases exhibit very low total thermal conductivities <0.5 W/K m. • ZT values of 0.15 at room temperature were measured for AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}.

36 MATERIALS SCIENCE↗

The cluster compound In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} containing Mo{sub 14} clusters and the new mono- and bi-capped trioctahedral Mo{sub 15} and Mo{sub 16} clusters: Synthesis, crystal structure, and electrical and magnetic properties

Single crystals of the new quaternary compound In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} were obtained by solid state reaction. The crystal structure was determined by single-crystal X-ray diffraction. In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} crystallizes in the orthorhombic space group Pbca with unit-cell parameters a=9.4432(14) Å, b=11.4828(12) Å, c=20.299(4) Å and Z=4. Full-matrix least-squares refinement on F{sup 2} using 3807 independent reflections for 219 refinable parameters resulted in R{sub 1}=0.0259 and wR{sub 2}=0.0591. The crystal structure contains in addition to Mo{sub 14} clusters the first examples of mono- and bi-capped trioctahedral Mo{sub 14} i.e. Mo{sub 15} and Mo{sub 16} clusters. The oxygen framework derives from a stacking along the a direction of close-packed layers with sequence (…ABAC…). The Mo–Mo distances range between 2.6938(5) and 2.8420(6) Å and the Mo–O distances between 1.879(5) and 2.250(3) Å, as usually observed in molybdenum oxide clusters. The indium atoms form In{sub 4}{sup 6+} bent chains with In–In distances of 2.6682(5) and 2.6622(8) Å and the Ti atoms are in highly distorted octahedral sites of oxygen atoms with Ti–O distances ranging between 1.865(4) and 2.161(4) Å. Magnetic susceptibility measurements confirm the presence of Ti{sup 4+} cations and the absence of localized moments on the Mo network. Electrical resistivity measurements on a single crystal of In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} show a semimetallic behavior. - Graphical abstract: We present here the synthesis, the crystal structure, and the electrical and magnetic properties of the new compound In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} in which Mo{sub 14} clusters coexist statistically with mono- and bi-capped trioctahedral Mo{sub 14} that is Mo{sub 15} and Mo{sub 16} clusters. - Highlights: • Single crystals of In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} were obtained by solid state reaction. • The crystal structure contains Mo{sub 14}, Mo{sub 15} and Mo{sub 16} clusters. • The indium atoms form In{sub 4}{sup 6+} bent chains. • Poorly metallic behavior. • Absence of localized moments on the Mo network as well as on the Ti atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and magnetic properties of Li{sub 2}InMo{sub 3}O{sub 8}: A novel reduced molybdenum oxide containing magnetic Mo{sub 3} clusters

Powder samples and single crystals of Li{sub 2}InMo{sub 3}O{sub 8} were obtained by solid state reaction. The structure was determined by single-crystal X-ray diffraction (771 independent reflections for 33 refinable, R1=0.0158 and wR2=0.0354). Li{sub 2}InMo{sub 3}O{sub 8} is isomorphous with Li{sub 2}SnMo{sub 3}O{sub 8} and crystallizes in the hexagonal space group P6{sub 3}mc with unit-cell parameters a=5.7931(2) Å, c=10.4681(4) Å and Z=2. The crystal structure consists of distorted hexagonal-close-packed oxygen layers with stacking sequence abac along [0 0 1] and that are held together by alternating lithium–indium and molybdenum layers. The Li{sup +} and In{sup 3+} ions occupy, respectively, tetrahedral and octahedral sites in the ratio 2:1. The Mo atoms occupy octahedral sites and form strongly bonded triangular clusters involving three MoO{sub 6} octahedra that are each shared along two edges, constituting a Mo{sub 3}O{sub 13} unit. The variations of the Mo–Mo and Mo–O bond lengths according to the number of electrons per Mo{sub 3} cluster are discussed. The trivalent oxidation state of the indium leads to one unpaired electron per Mo{sub 3} and thus gives rise to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. The magnetic susceptibility vs. temperature curve also shows a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters. - Graphical abstract: We present here the synthesis, the crystal structure, and the magnetic properties of the new quaternary compound Li{sub 2}InMo{sub 3}O{sub 8} containing magnetic Mo{sub 3}O{sub 13} units with one unpaired electron. - Highlights: • The new quaternary reduced molybdenum oxide containing Mo{sub 3} clusters, Li{sub 2}InMo{sub 3}O{sub 8}, was synthesized by solid state reaction. • Single-crystal X-ray study. • One unpaired electron per Mo{sub 3} cluster leading to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. • Magnetic susceptibility measurements show a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of blister formation in sputtered Cu{sub 2}ZnSnS{sub 4} absorbers for thin film solar cells

Blister formation in Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films sputtered from a quaternary compound target is investigated. While the thin film structure, composition, and substrate material are not correlated to the blister formation, a strong link between sputtering gas entrapment, in this case argon, and blistering effect is found. It is shown that argon is trapped in the film during sputtering and migrates to locally form blisters during the high temperature annealing. Blister formation in CZTS absorbers is detrimental for thin film solar cell fabrication causing partial peeling of the absorber layer and potential shunt paths in the complete device. Reduced sputtering gas entrapment, and blister formation, is seen for higher sputtering pressure, higher substrate temperature, and change of sputtering gas to larger atoms. This is all in accordance with previous publications on blister formation caused by sputtering gas entrapment in other materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternative Pathogen Control Chemistry of Glass Fiber-Reinforced Polyester Panels for Cooling Towers

This study aimed to investigate the antibiofouling activity of 3-(trimethoxysilyl)-propyl, alkyldimethylammonium chloride-based (SilQUAT)-treated glass fiber-reinforced polyester (GFRP) composite panels in model cooling tower system. All surface characterization analyses were performed by using FTIR and XPS and showed that surface chemical composition peaks confirmed the successful coating of compound. The antibiofilm efficacy of the SilQUAT-treated GFRP panels was evaluated with culture, ATP measurement and live/dead fluorescence staining, for 6 months. To mimic mechanical interventions, the durability and residual self-sanitizing activity of the treated GFRP panels was tested by modifying the EPA # 01-1A protocol, after abrasion. At the end of the 6-month period, the antibacterial effect was 95% and 99.90% for abraded and non-abraded materials, respectively. The current study provides an alternative application to prevent biofilm at source by modification and imparting antibacterial properties to the material. Prevention of biofilm at its source is an important approach by providing indirect benefits such as the reduction in corrosion and secondary environmental pollution caused by the use of excess biocides, and consequently, the reduction in cost and the risk of harm to the public/environment will also be of interest.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a new family of alkylammonium–chromium phosphates with worm-like morphology

A series of layered alkylammonium–chromium phosphates, formulated as [C{sub n}H{sub 2n+1}NH{sub 3}]Cr(OH)PO{sub 4} (n=2–6), has been synthesized under hydrothermal conditions. The interlayer spacing, increasing linearly with the increase of alkyl-chain length from 13.61 Å (n=2) to 21.20 Å (n=6), is occupied by a double sheet of packed amine molecules with a tilt angle of ca. 51° respect to the inorganic sheet. The powders are constituted by circular plates (diameter=0.5–3 µm, thickness=∼50 nm) with central holes when n=4–6, stacked in axial direction showing worm-like morphologies. The presence of holes, and some corrugated and zig-zag fashions observed on the edge of thin circular plates are the most probable ways for the reduction of the steric tensions between organic and inorganic portions in these hybrid materials. The thermal and thermo-oxidative stability of selected compounds have been studied, including the determination of activation energy data for the decomposition processes. - Graphical abstract: A novel series of layered alkylammonium–chromium phosphates, [C{sub n}H{sub 2n+1}NH{sub 3}]Cr(OH)PO{sub 4} (n=2–6), was obtained and characterized. The interlayer spacing, increasing linearly with the increase of alkyl-chain length, is occupied by a double sheet of packed amine molecules. The powders are constituted by circular plates (diameter=0.5–3 µm, thickness=∼50 nm) with central holes when n=4–6, stacked in axial direction showing worm-like morphologies. - Highlights: • A series of alkylammonium–chromium phosphates has been obtained by the hydrothermal method. • The interlayer spacing increases linearly with the increase of alkyl-chain length. • The interlayer spacing is occupied by a double sheet of packed amine molecules. • The powders are constituted by stacked circular plates showing wormlike morphology. • Thermal behaviour depends on the atmosphere used and the intercalated amine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Liquid–Liquid Phase Separation of Submicrometer Proxies for Atmospheric Secondary Aerosol

Liquid–liquid phase separation (LLPS) of atmospheric aerosols can significantly impact climate, air quality, and human health. However, their complex composition, small size, and history-dependent properties result in great uncertainty in the modeling of aerosol phase state and atmospheric processes. Herein, using cryogenic transmission electron microscopy (cryo-TEM), we examined model submicron aerosols composed of organic compounds and ammonium sulfate, and established a parameterization for the separation relative humidity (SRH) that accounts for chemical composition, particle size, and equilibration time. We evaluated different variables that describe chemical composition: O/C ratio, partition coefficient, solubility, molar mass, and polarizability. The O/C ratio fits the SRH of micrometer droplets best, and by using a scaling factor to translate the micrometer SRH parameterization to submicron aerosols, we incorporate the effects of size and equilibration time. The measured scaling factor for the submicron mean SRH (30nm – 1μm, 20 min equilibration times) is 0.80, the factor becomes 1 with equilibration time over 1 hour, and is equal to 0, meaning that SRH is absent, when the aerosol dry diameter is smaller than 30 nm. Furthermore, our parameterization will aid in universal SRH modeling, potentially leading to more accurate predictions of aerosol mass, optical properties, hygroscopicity, and heterogeneous chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and magnetotransport properties of the new quasi-two-dimensional molecular metal {beta}''-(BEDT-TTF){sub 4}H{sub 3}O[Fe(C{sub 2}O{sub 4}){sub 3}] . C{sub 6}H{sub 4}Cl{sub 2}

The {beta}''-(BEDT-TTF){sub 4}A{sup I}[M{sup III}(C{sub 2}O{sub 4}){sub 3}] . G(A{sup I}=NH{sub 4}{sup +}, H{sub 3}O{sup +}, K{sup +}, Rb{sup +}; M{sup III}=Fe, Cr; G = 'guest' solvent molecule) family of layered molecular conductors with magnetic metal oxalate anions exhibits a pronounced dependence of the conducting properties on the type of neutral solvent molecules introduced into the complex anion layer. A new organic dichlorobenzene (C{sub 6}H{sub 4}Cl{sub 2})-containing conductor of this family, namely, {beta}''-(BEDT-TTF){sub 4}H{sub 3}O[Fe(C{sub 2}O{sub 4}){sub 3}] . C{sub 6}H{sub 4}Cl{sub 2}, is synthesized. The structure of the synthesized single crystals studied by X-ray diffraction is characterized by the following parameters: a = 10.421(1) A, b= 19.991(2) A, c= 35.441(3) A, {beta} = 92.87(1){sup o}, V= 7374(1) A{sup 3}, space groupC2/c, and Z = 4. In the temperature range 0.5 and 2-300 K, the conductivity of the crystals is metallic without changing into a superconducting state. The magnetotransport properties of the crystals are examined in magnetic fields up to 17 T at T = 0.5 K. In fields higher than 10 T, Shubnikov-de Haas oscillations are detected, and the Fourier spectrum of these oscillations contains two frequencies with maximum amplitudes of about 80 and 375 T. The experimental results are compared with the related data obtained for other phases of this family. The possible structural mechanisms of the effect of a guest solvent molecule on the transport properties of the {beta}''-(BEDT-TTF){sub 4}A{sup I}[M{sup III}(C{sub 2}O{sub 4}){sub 3}] . G crystals are analyzed.

36 MATERIALS SCIENCE↗

Fabrication of silica-coated gold nanorods and investigation of their property of photothermal conversion

This study described the preparation of silica-coated Au nanorods (AuNR/SiO{sub 2}) in a colloidal solution, assessed their property of photothermal conversion, and investigated their ability to kill cancer cells using photothermal conversion. Au-seed nanoparticles were produced by reducing hydrogen tetrachloroaurate (HAuCl{sub 4}) with sodium borohydride (NaBH{sub 4}) in aqueous n-hexadecyltrimethylammonium bromide (CTAB) solution. AuNRs were then fabricated by reducing HAuCl{sub 4} and silver nitrate (AgNO{sub 3}) with L-ascorbic acid in the aqueous CTAB solution in the presence of Au-seed nanoparticles. The as-prepared AuNRs were washed by a process composed mainly of centrifugation to remove the CTAB. The washed AuNRs were coated with silica by mixing the AuNR colloidal solution, an aqueous solution of (3-aminopropyl)trimethoxysilane, and tetraethylorthosilicate/ethanol solution with a water/ethanol solution. We found that the addition of AuNR/SiO{sub 2} in water, in mice, and in a culture medium with cancer cells, followed by irradiation with a laser, cause an increase in temperature, demonstrating that AuNR/SiO{sub 2} have the ability of photothermal conversion. In addition, the cancer cells in the culture medium were found to be killed due to the increase in temperature caused by the photothermal conversion. - Highlights: • This study described the preparation of silica-coated Au nanorods (AuNR/SiO{sub 2}) colloidal solution. • The AuNR/SiO{sub 2} had the ability of photothermal conversion. • The AuNR/SiO{sub 2} also had the ability to kill cancer cells using the photothermal conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the hygroscopic growth of self-assembled layers of N-alkyl-N-methylpyrrolidinium bromides at the interface between air and organic salt

We report on the hygroscopic growth of self-assembled lamellae, composed of N-alkyl-N-methylpyrrolidinium bromide (CnMPB; n = 10, 12, 14, 16, 18) surfactant molecules, spontaneously formed at the interface between ambient air and the low-melting organic salt tetrabutylammonium acetate (TBAAc). The organization process to form well-defined hygroscopic bilayer patterns at the air/TBAAc interface was investigated using a combination of time-dependent X-ray diffraction (XRD) and carbon-13 cross-polarization magic angle spinning nuclear magnetic resonance (13C CP/MAS NMR) spectroscopy. CnMPB surfactants containing the highest alkyl chain lengths studied (n = 16, 18) formed highly ordered, fully-interdigitated bilayer patterns with an all-trans conformation of interior methylene carbons. In contrast, CnMPB surfactants with shorter alkane chains (n = 10, 12, 14) in this series formed less-ordered bilayer arrangements with mixed trans/gauche aliphatic character. The lamellar patterns became increasingly ordered with longer exposure to humid air at the air/salt interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selected-control hydrothermal synthesis and formation mechanism of 1D ammonium vanadate

Selective-controlled structure and shape of ammonium vanadate nanocrystals were successfully synthesized by a simple hydrothermal method without the presence of catalysts or templates. It was found that tuning the pH of the growth solution was a crucial step for the control of the phase-compositional, structure and morphology transformation. The final products were NH{sub 4}V{sub 4}O{sub 10} nanobelts, (NH{sub 4}){sub 2}V{sub 6}O{sub 16}.1.5H{sub 2}O nanowires, and (NH{sub 4}){sub 6}V{sub 10}O{sub 28}.6H{sub 2}O nanobundles, respectively, when the pH of the growth solution varied from 2.5 to 1.5, then to 0.5. The hydrogen bonding interaction and the surface free energies were responsible for the formation of the ammonium vanadates with the different structure and morphology. The conductivity measurements showed the one-dimensional (1D) ammonium vanadates were semiconductors at room temperature. The conductivity of 1D ammonium vanadates varied from 1.95x10{sup -4} to 2.45x10{sup -3} S cm{sup -1} due to the different structures. - Graphical abstract: Selective-controlled structure and shape of ammonium vanadate nanocrystals were successfully synthesized by a simple hydrothermal method without the presence of catalysts or templates. The final products were NH{sub 4}V{sub 4}O{sub 10} nanobelts, (NH{sub 4}){sub 2}V{sub 6}O{sub 16}.1.5H{sub 2}O nanowires, and (NH{sub 4}){sub 6}V{sub 10}O{sub 28}.6H{sub 2}O nanobundles, respectively, when the pH of the growth solution varied from 2.5 to 1.5, then to 0.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CTAB-assisted synthesis of mesoporous F-N-codoped TiO{sub 2} powders with high visible-light-driven catalytic activity and adsorption capacity

This article describes the preparation of mesoporous rod-like F-N-codoped TiO{sub 2} powder photocatalysts with anatase phase via a sol-gel route at the temperature of 373 K, using cetyltrimethyl ammonium bromide (CTAB) as surfactant. The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra (UV-vis DRS). The results showed that the photocatalysts possessed a homogeneous pore diameter and a high surface area of 106.3-160.7 m{sup 3} g{sup -1}. The increasing CTAB reactive concentration extended the visible-light absorption up to 600 nm. The F-N-codoped TiO{sub 2} powders exhibited significant higher adsorption capacity for methyl orange (MO) than that of Degussa P25 and showed more than 6 times higher visible-light-induced catalytic degradation for MO than that of P25. - Graphical abstract: The introduction of surfactant CTAB not only extended the visible light absorption of mesoporous F-N-codoped TiO{sub 2} up to 600 nm but also significantly enhanced the adsorption capacity and visible-light-induced degradation for methyl orange. Mesoporous rod-like F-N-codoped TiO{sub 2} powder photocatalysts were synthesized via a sol-gel route at low temperature of 373 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of iron oxides using ammonium iron citrate precursor: Thin films and nanoparticles

Ammonium iron citrate (C{sub 6}H{sub 8}O{sub 7}.nFe.nH{sub 3}N) was used as a precursor for preparing both iron-oxide thin films and nanoparticles. Thin films of iron oxides were fabricated on silicon (111) substrate using a successive-ionic-layer-adsorption-and-reaction (SILAR) method and subsequent hydrothermal or furnace annealing. Atomic force microscopy (AFM) images of the iron-oxide films obtained under various annealing conditions show the changes of the micro-scale surface structures and the magnetic properties. Homogenous Fe{sub 3}O{sub 4} nanoparticles around 4 nm in diameter were synthesized by hydrothermal reduction method at low temperature and investigated using transmission electron microscopy (TEM). - Graphical abstract: Both iron-oxide thin films and nanoparticles (about 4 nm in diameter) are successfully achieved via successive-ionic-layer-adsorption-and-reaction and hydrothermal techniques in the use of ammonium iron citrate as a precursor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and photocatalytic activity of co-doped mesoporous TiO{sub 2} on Brij98/CTAB composite surfactant template

Using composite surfactant templates, polyoxyethylene (20) oleyl ether (Brij98) and cetyl trimethyl ammonium bromide (CTAB), as structure-directing agents, N and La co-doped mesoporous TiO{sub 2} complex photocatalysts were synthesized successfully. The micromorphology of co-doped mesoporous TiO{sub 2} samples was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FT-IR), energy-dispersive X-ray spectrometer (EDS) and N{sub 2} adsorption-desorption measurements. The results indicated that the complex photocatalyst prepared with a molar ratio of Brij98:CTAB=1:1 showed a uniform pore size of ca. 7 nm and a high specific surface area (S{sub BET}) of 279.0 m{sup 2} g{sup -1}, and exhibited the highest photocatalytic activity for degradation of papermaking wastewater under ultra-violet light irradiation. The chemical oxygen demand (CODc{sub r}) percent degradation was about 73% in 12 h and chroma percent degradation was 100% in 8 h. - Graphical abstract: CODc{sub r} percent degradation of papermaking wastewater is about 73% after 12 h over the co-doped mesoporous TiO{sub 2} prepared with a molar ratio of Brij98:CTAB=1:1.

77 NANOSCIENCE AND NANOTECHNOLOGY↗