Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aeration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Context and mitigation of lost circulation during geothermal drilling in diverse geologic settings

Lost circulation is one of the most common and expensive problems facing geothermal energy development, representing up to 30% of drilling costs. We examined drilling records from four geothermal fields—McGinness Hills in central Nevada, Don A. Campbell and Steamboat Hills in western Nevada, and Puna Geothermal Venture on the Big Island of Hawai'i— to identify geologies most prone to lost circulation, as well as common mitigation strategies. Depths of lost circulation events varied, but their frequency often increased in the production interval. Lost circulation commonly occurred near fault intersections, and heavily faulted fields like McGinness Hills and Don A. Campbell showed secondary mineralization within approximately 100 m (328 ft) or less of where circulation was lost. Lost circulation mitigation strategies included using locally available materials (e.g., cotton seed hulls) as well as more expensive proprietary lost circulation materials, cement plugs above the reservoir, and drilling blind with aerated, polymer-based mud in the production zone. Addressing lost circulation using a well thought out decision-making approach and materials above the reservoir will save time and cost, and provide needed well integrity. Mitigation often requires a series of steps, typically applied from perceived least expensive to most, and are dependent on the severity and location in the well where circulation was lost and availability of materials. Placing cement plugs can cure lost circulation events, however these plugs are often expensive, time-consuming, and may not be successful.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Solid phase characterization and transformation of illite mineral with gas-phase ammonia treatment

In situ remediation applications of ammonia (NH 3 ) gas have potential for sequestration of subsurface contamination. Ammonia gas injections initially increase the pore water pH leading to mineral dissolution followed by formation of secondary precipitates as the pH is neutralized. However, there is a lack of understanding of fundamental alteration processes due to NH 3 treatment. In these batch studies, phyllosilicate minerals (illite and montmorillonite) were exposed to NH 3 gas with subsequent aeration to simulate in situ remediation. Following treatments, solids were characterized using a variety of techniques, including X-ray diffraction, N 2 adsorption-desorption analysis for surface area, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), and microscopy methods to investigate physicochemical transformations. The results of this study indicate that, at high pH, the clays are altered as observed by differences in morphology and particle size via microscopy. However, the two clays interact differently with NH 3 . While montmorillonite interlayers collapsed due to intercalation, illite layers were unaffected as confirmed by FTIR analysis. Further, structural changes in silicate ([SiO 4 ] n- ) and aluminol (Al-OH) groups were identified by NMR and FTIR. This research showed that mineral alteration processes occur during and after NH 3 gas treatment which may be used to remove radionuclides from the aqueous phase through sorption, co-precipitation, and coating with secondary phyllosilicate alteration products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Formation of uranium nitride nanoparticles via mechanical alloying of uranium-molybdenum alloy fuels in gaseous nitrogen

Uranium-molybdenum (U-Mo) alloys show promise as a nuclear fuel system due to their high thermal conductivity and fuel loading capability. However, U-Mo systems are susceptible to irradiation induced swelling ultimately affecting the cladding via mechanical and chemical interactions. To address these shortcomings, this research investigated the formation of uranium mononitride (UN) nanoparticles within a 90 wt% U/10 wt% Mo (U-10Mo) matrix to act as a prospective defect sink for fission products at nanometric hetero-interfaces. To promote the formation of UN, U-10Mo powders were mechanically alloyed under a high purity nitrogen atmosphere. Variations of the milling process investigated included media size, duration of milling, and number of times the milling jar was re-aerated with nitrogen gas. Characterization of the fuel microstructure was completed using light element analysis, X-ray diffraction, scanning and transmission-electron microscopy, electron energy loss spectroscopy, and atom probe tomography. UN nanoparticles measuring 1–5 nm in radius were observed in the U-Mo matrix as early as 1 h into the mechanical alloying process. Milling time in excess of 10 h was found to lead to deleterious effects induced by the stainless-steel milling media.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Hydroxyl radical yields in the heavy ion radiolysis of water

The yields of hydroxyl radicals in the radiolysis of water with protons and carbon ions have been examined using experimental scavenging techniques coupled with Monte Carlo track simulations. Combined with previous results using helium ions, this set of data gives valuable information on the potential for radiation induced damage to biological systems for light ions with very different track structures. Carbon dioxide production from aerated formic acid solutions in concentrations ranging from 10 -3 to 1 M was used as a probe of hydroxyl radical yields from about 8 ns to 8 µs. Numerical interpolation of the results at slightly different ion energies in combination with data from gamma radiolysis allows for a systematic analysis of both track average and track segment yields. As expected, considerable track chemistry is found to occur on the nanosecond to microsecond time scales. Monte Carlo track simulations employing stochastic diffusion-kinetic calculations of product yields are found to reproduce experimental observations satisfactorily. The track simulations are used to extract hydroxyl radical kinetics in pure water at neutral conditions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Soil oxidoreductase zymography: Visualizing spatial distributions of peroxidase and phenol oxidase activities at the root-soil interface

Decomposition of organic material in the rhizosphere – the most dynamic microbial habitat in soil – involves arrays of oxidoreductase and hydrolytic enzymes. Spatial distributions of various hydrolytic activities in soil have already been explored by zymographic techniques. However, the distribution of oxidative activity in the rhizosphere remains to be studied. Thus, we extended a Time-Lapse Zymography technique, using Amplex Red® reagent, to visualize and quantify distributions of phenol oxidase and peroxidase activities in the rhizosphere of Zea mays L. growing in a Haplic Phaeozem and the non-rhizospheric soil. The gross oxidative activity was greatest at the root surfaces, and fell to background soil levels 1.26 and 0.73 mm from seminal (>1 mm diameter) and lateral (<0.5 mm diameter) roots, respectively. The rhizosphere extent relative to the root radius was 59% broader around lateral than around seminal roots. The greatest activities, up to 30 nmol cm –2 min –1 , were peroxidase-dominated and closely associated with roots. Here, the results confirm the utility of the approach for studying spatio-temporal distributions of oxidative activities in soil. However, actual activity of oxidoreductases in the field will be strongly controlled by fluctuating environmental conditions such as soil aeration and the gradient of reactive oxygen species, which need to be considered especially in anoxic soils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Environmental Life Cycle Assessment of small water resource recovery facilities: Comparison of mechanical and lagoon systems

Small water resource recovery facilities (WRRFs) serving communities with populations of less than 10,000 people account for 70% of centralized wastewater treatment systems in the United States. Here, with growing interest globally in improving the sustainability of these systems, this study evaluated the environmental life cycle impact and land use tradeoffs of different lagoon and mechanical WRRFs across the diverse climate of Nebraska. Life cycle inventory including construction and operations was collected for 35 existing systems representing a range of commonly used mechanical WRRFs: oxidation ditch, extended aeration, and sequencing batch reactors, and lagoon treatment systems: complete retention, irrigation, and controlled discharge lagoons.

42 ENGINEERING↗
DOE OSTI2025

Three-Dimensional Bubble Fluidics in Architected Porous Media

Gas bubble flows in porous media often exhibit complex and seemingly unpredictable behaviors that are difficult to control. This lack of control limits the ability to design effective devices which manage multiphase flows. Here, we show how the design of 3D printed pores can deterministically control the flow path of an injected gas stream. Open cell structures can be designed to shape the gas/liquid interface with fidelity to control how the two phases are distributed throughout a porous material. The distributed gas volume is free to interact physically and chemically with the surrounding liquid phase, an effect we exploit to create a logical control gate to redirect flows within a lattice. This also allows us to design architectures for reactive capture and aerating bioreactors, resulting in patterned boundaries which can make more effective use of the liquid and gas reagents.

3D microfluidics↗
DOE OSTI2023

Dinitrogen Emissions Dominate Nitrogen Gas Emissions From Soils With Low Oxygen Availability in a Moist Tropical Forest

Lowland tropical forest soils are relatively N rich and are the largest global source of N 2 O (a powerful greenhouse gas) to the atmosphere. Despite the importance of tropical N cycling, there have been few direct measurements of N 2 (an inert gas that can serve as an alternate fate for N 2 O) in tropical soils, limiting our ability to characterize N budgets, manage soils to reduce N 2 O production, or predict the future role that N limitation to primary productivity will play in buffering against climate change. We collected soils from across macro‐ and micro‐topographic gradients that have previously been shown to differ in O 2 availability and trace gas emissions. We then incubated these soils under oxic and anoxic headspaces to explore the relative effect of soil location versus transient redox conditions. No matter where the soils came from, or what headspace O 2 was used in the incubation, N 2 emissions dominated the flux of N gas losses. In the macrotopography plots, production of N 2 and N 2 O were higher in low O 2 valleys than on more aerated ridges and slopes. In the microtopography plots, N 2 emissions from plots with lower mean soil O 2 (5%–10%) were greater than in plots with higher mean soil O 2 (10%–20%). We estimate an N gas flux of ∼37 kg N/ha/yr from this forest, 99% as N 2 . These results suggest that N 2 fluxes may have been systematically underestimated in these landscapes, and that the measurements we present call for a reevaluation of the N budgets in lowland tropical forest ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

SGD-OD: investigating the potential oxygen demand of submarine groundwater discharge in coastal systems

Submarine groundwater discharge (SGD) supplies nutrients, carbon, metals, and radionuclide tracers to estuarine and coastal waters. One aspect of SGD that is poorly recognized is its direct effect on dissolved oxygen (DO) demand in receiving waters, denoted here as SGD-OD. Sulfate-mediated oxidation of organic matter in salty coastal aquifers produces numerous reduced byproducts including sulfide, ammonia, dissolved organic carbon and nitrogen, methane, and reduced metals. When these byproducts are introduced to estuarine and coastal systems by SGD and are oxidized, they may substantially reduce the DO concentration in receiving waters and impact organisms living there. We consider six estuarine and coastal sites where SGD derived fluxes of reduced byproducts are well documented. Using data from these sites we present a semiquantitative model to estimate the effect of these byproducts on DO in the receiving waters. Without continued aeration with atmospheric oxygen, the study sites would have experienced periodic hypoxic conditions due to SGD-OD. The presence of H2S supplied by SGD could also impact organisms. This process is likely prevalent in other systems worldwide.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

High temperature gamma radiation-induced chromium redox chemistry via in situ spectroscopic measurements

Chromium ions can make their way into the primary coolant of nuclear power reactors from the corrosion of stainless-steel reactor components, decreasing the material's corrosion resistance and resulting in increased transport of further corrosion products. Despite these potential effects, the radiation-induced redox speciation of chromium ions in aqueous solution is not well understood, especially at the elevated temperatures experienced by reactor coolants. Here, in the present work, we report new experimental results demonstrating that in aerated aqueous solution, the radiolytic oxidation of Cr(III) to Cr(VI) occurs at pH 4, while the reduction of Cr(VI) to Cr(III) occurs at pH 2. The oxidation of Cr(III) is primarily attributed to the reaction of the hydroxyl radical (˙OH) with the Cr(OH) 2+ species, while the reduction of Cr(VI) is attributed to reactions involving the hydrated electron (e aq - ) and hydrogen atom (H˙). Additionally, the steady-state equilibrium yield of Cr(VI) from the gamma irradiation of pH 4 Cr(III) solutions decreased with increasing temperature (over a range of 37–195 °C). This observation indicates that the activation energy of the Cr(VI) reduction reactions is higher than that for the Cr(III) oxidation reactions, such that it becomes relatively more favorable at higher temperatures. Overall, these data are important for the development of complementary multiscale models for the prediction of metal ion speciation in high temperature radiation environments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Assessing the methane mitigation potential of innovative management in US rice production

Abstract Rice is an important global crop while also contributing significant anthropogenic methane (CH 4 ) emissions. To support the future of rice production, more information is needed on the impacts of sustainability-driven management used to grow rice with lower associated methane emissions. Recent support for the impacts of different growing practices in the US has prompted the application of a regional methodology (Tier 2) to estimate methane emissions in different rice growing regions. The methodology estimates rice methane emissions from the US Mid-South (MdS) and California (Cal) using region-specific scaling factors applied to a region-specific baseline flux. In our study, we leverage land cover data and soil clay content to estimate methane emissions using this approach, while also examining how changes in common production practices can affect overall emissions in the US. Our results indicated US rice cultivation produced between 0.32 and 0.45 Tg CH 4 annually, which were approximately 7% and 42% lower on average compared to Food and Agriculture Organization of the UN (FAO) and US Environmental Protection Agency (EPA) inventories, respectively. Our estimates were 63% greater on average compared to similar methods that lack regional context. Introducing aeration events into irrigation resulted in the greatest methane reductions across both regions. When accounting for differences between baseline and reduction scenarios, the US MdS typically had higher mitigation potential compared to Cal. The differences in cumulative mitigation potential across the 2008–2020 period were likely driven by lower production area clay content for the US MdS compared to Cal. The added spatial representation in the Tier 2 approach is useful in surveying how impactful methane-reducing practices might be within and across regions.

Environmental Sciences & Ecology↗
DOE OSTI2022

Simple steps to enable reproducibility: culture conditions affecting Chlamydomonas growth and elemental composition

Even subtle modifications in growth conditions elicit acclimation responses affecting the molecular and elemental makeup of organisms, both in the laboratory and in natural habitats. Here, we systematically explored the effect of temperature, pH, nutrient availability, culture density, and access to CO 2 and O 2 in laboratory-grown algal cultures on growth rate, the ionome, and the ability to accumulate Fe. We found algal cells accumulate Fe in alkaline conditions, even more so when excess Fe is present, coinciding with a reduced growth rate. Using a combination of Fe-specific dyes, X-ray fluorescence microscopy, and NanoSIMS, we show that the alkaline-accumulated Fe was intracellularly sequestered into acidocalcisomes, which are localized towards the periphery of the cells. At high photon flux densities, Zn and Ca specifically over-accumulate, while Zn alone accumulates at low temperatures. The impact of aeration was probed by reducing shaking speeds and changing vessel fill levels; the former increased the Cu quota of cultures, the latter resulted in a reduction in P, Ca, and Mn at low fill levels. Trace element quotas were also affected in the stationary phase, where specifically Fe, Cu, and Zn accumulate. Cu accumulation here depends inversely on the Fe concentration of the medium. Individual laboratory strains accumulate Ca, P, and Cu to different levels. All together, we identified a set of specific changes to growth rate, elemental composition, and the capacity to store Fe in response to subtle differences in culturing conditions of Chlamydomonas, affecting experimental reproducibility. Accordingly, we recommend that these variables be recorded and reported as associated metadata.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Net Zero Energy Model for Wastewater Treatment Plants

The primary objective of this study is to achieve net-zero energy (NZE) wastewater treatment plants (WWTPs) by utilizing energy efficiency opportunities (EEO), combined heat and power (CHP) systems, and other renewable energy (RE) sources, e.g., solar, water, and wind powers. Herein, this study discusses an innovative energy solution for WWTPs in the United States, and one of the WWTPs with a flow capacity of 1.5 million gallons per day (MGD) was selected as a case study. An optimization tool, Hybrid Optimization of Multiple Energy Resources (HOMER) software, is used in this study to find the best energy system configuration to run the system. An energy audit for one WWTP was conducted in early 2020 and the report is used to do this study. The proposed EEOs were able to reduce WWTP energy consumption by about 11%. The excess anaerobic digester gas was utilized in a CHP system to cover about 42% of the facility’s consumption. Also, 3% of the utility energy consumption can be claimed by microturbines in the aeration tanks. Another two renewable energy systems, solar photovoltaic (PV) with 29% and water turbines with 15%, contribute to covering 100% of the WWTP energy consumption and achieving an NZE WWTP.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Lactiplantibacillus plantarum uses ecologically relevant, exogenous quinones for extracellular electron transfer

Extracellular electron transfer (EET) is a metabolic process that frequently uses quinones to couple intracellular redox reactions with extracellular electron acceptors. The physiological relevance of this metabolism for microorganisms capable of EET but unable to synthesize their own quinones remains to be determined. To address this question, we investigated quinone utilization by Lactiplantibacillus plantarum, a microorganism required for food fermentations, that performs EET and is also a quinone auxotroph. L. plantarum selectively used 1,4-dihydroxy-2-naphthoic acid (DHNA) and more hydrophilic naphthoquinones for EET reduction of insoluble iron (ferrihydrite). However, quinones used for EET also inhibited L. plantarum growth in non-aerated conditions. Transcriptomic analysis showed that DHNA-induced oxidative stress in L. plantarum, but this was alleviated when the electron acceptor, ferric ammonium citrate (FeAC), was included in the growth medium. Although DHNA and FeAC induced L. plantarum EET, this metabolism was still dependent on direct access to environmental electron shuttles. To determine whether quinone-producing food fermentation bacteria could be sources of those electron shuttles, L. plantarum EET was measured after incubation with Lactococcus lactis and Leuconostoc mesenteroides. Quinone-producing L. lactis, but not a quinone-deficient L. lactis ΔmenC mutant, increased L. plantarum ferrihydrite reduction and medium acidification through an EET-dependent mechanism. L. plantarum EET was also stimulated by L. mesenteroides, resulting in greater environmental acidification and transient increases in L. plantarum cell numbers. Our findings show that L. plantarum overcomes the toxic effects of exogenous quinones to use those compounds for EET-conferred, ecological advantages during the early stages of food fermentations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Metagenomes and metagenome-assembled genomes from microbial communities in a biological nutrient removal plant operated at Hamptons Road Sanitation District (HRSD) with high and low dissolved oxygen conditions

Aeration is a major cost at biological nutrient removal (BNR) plants. We report on microbial communities in a pilot-scale BNR system before and after a dissolved oxygen transition from 2.5 to 0.2 mg/L implemented over 18 months. Four PacBio metagenomes and 316 metagenome-assembled genomes are announced.

dissolved oxygen↗
DOE OSTI2020

Scaling Energy Efficient Retrofits for Small Commercial Apartment Buildings

With support from the U.S. Department of Energy’s (DOE) Building Technologies Office (BTO), the International Center for Appropriate and Sustainable Technology (ICAST) recently completed a three-year cooperative agreement to scale energy efficiency retrofits (EER) on small multifamily (MF) buildings. ICAST EER strategies ranged from low-hanging “direct install” of measures such as LED lighting, low-flow showerheads and aerators, and smart thermostats to major strategies such as HVAC replacement with high-efficiency boilers or heat pumps. As feasible, some projects also included the addition of renewable energy sources such as photo voltaic (PV) solar. When ICAST began the BTO project, it operated in two states and oversaw EER at approximately 80 MF buildings per year. With assistance from BTO, ICAST has grown significantly and now has staff in six states with MF EER projects in another seven, and performed EER on 956 MF buildings. ). ICAST was able to successfully execute this project by 1) Improving viability and efficiency of its processes, 2) Launching two new services and 3) Creating an affiliate program. For the most part, ICAST focused on a specific type of MF property: naturally occurring affordable housing (NOAH), because it is a significantly underserved market within the hard-to-serve MF market. NOAHs are typically smaller properties (5 to 64 units), owned by small organizations or individual investors looking for positive cash flow. ICAST believes the NOAH market can be successfully served with a one-stop-shop approach that makes it easy, hassle-free, and cost-effective for owners to acquire green upgrades for their property(ies). With the assistance of BTO funding, ICAST successfully used the cited EER methods and strategies to scale-up its OSS approach to service a greater number of MF housing and expand into new geographies. Additionally, support from BTO helped ICAST create self-sustaining programs which will not need to rely on on-going funding.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Implementing an aerosol dynamic shape factor for cerium oxide powder

The shape factor (X B ) of bulk powder CeO 2 (cerium oxide) particles is estimated to be X B = 1.34 (dimensionless). This is defined in relation to the measured aerated bulk density (0.91 g cm -3 , Hosokawa Micron, Summit NJ, 2018) of the CeO 2 powder. This information is used to determine the RRF (respirable release factor), and other parameters during drop test experiments of nuclear material storage containers at Los Alamos National Laboratory. The calculation is based on an experimental shape factor (X P = 2.66 dimensionless) for CeO 2 particles of the same (chain aggregate) morphology studied by other researchers. In that work, the shape factor was defined in terms of the maximum possible (compacted) density of CeO 2 material (7.13 g cm -3 ).

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Concentrating Rare Earth Elements in Coal mine drainage Using Coal Combustion Products through Abandoned Mine Land Reclamation

Rare earth elements (REEs) (including scandium, yttrium and a group of 15 lanthanides) are often considered to be critical components in the productions of renewable energy hardware, electric vehicles, health care and military equipment, and consumer electronic products. The demand of REEs has been projected to be growing at an annual rate of 5-9% in the next 25 years. In 2011, the global demand of total rare earth oxides (REOs) was estimated to be approximately 105,000 tons, which is expected to grow to 210,000 tons by 2025. China overwhelmingly dominates the current worldwide rare earth productions but has strategically restricted its exports, causing significant instability for the global market. In response to the increasing demand for REEs and the supply dominance of China, identifying alternative sources of REEs has become a critical issue for the United States and other countries. Coal, coal ash, and coal mine drainage (CMD) are considered to be the alternative sources of REEs. In the U.S., high REE concentrations have been reported to be closely associated with coal deposits, including the Appalachian Basins. When surface and/or groundwater come in contact with geologic strata containing sulfide minerals exposed by coal mining, the accelerated oxidation of sulfide minerals in the presence of ferric iron and/or oxygen can produce sulfuric acid. The process promotes the weathering of REE-bearing rocks and minerals in the host geologic strata. Compared to average river water and seawater, the concentrations of REEs can be orders of magnitude higher in CMD. In this study, we demonstrated a trap-extract-precipitate (TEP) process that can effectively recover REEs from CMD. The three-stage TEP process uses alkaline industrial by-products to capture REEs from CMD and then applies an extraction/precipitation procedure to produce a feedstock that can be economically processed to produce marketable rare earth oxides. The alkaline industrial by-products tested in this study include the residual from a water softening process (DRWP sludge) and two types of stabilized flue gas desulfurization materials (sFGDs). sFGD material is a mixture of lime (CaO) and two coal combustion by-products, calcium sulfite FGD by-product and fly ash. The objectives of this study are to (1) validate the effectiveness and feasibility; (2) determine mechanisms controlling the rare earth recovery, (3) quantify the associated economic and environmental benefits, and (4) evaluate the full-scale application. To achieve these objectives, tasks to be carried out in this proposed project are organized into three phases. In the first phase, the research team collaborated with Ohio Department of Natural Resources, American Electric Power, The Wilds (a nonprofit wildlife conservation organization), and a private landowner to carry out field investigations aimed to screen and evaluate the seasonal changes of rare earths in the CMD discharges that have high recovery potentials. Next, the recovery of REEs from CMD was tested using a series of lab-scale column and batch tests under, respectively, percolation and completely mixed conditions. Results obtained from these lab-scale studies show that all three tested solids are very effective in retaining REEs. Over 98% of the CMD REEs that contacted the solids were captured before the solids exhausted their neutralization capacities. We also determined an extraction process using a non-acid, organic ligand extraction solution that can effectively remobilize the retained REEs from the spent solids (over 90%). The REE concentrate (>7.5 wt. % of total REEs) is then formed in an aeration process. The TEP process uses environmentally benign industrial by-products and a naturally-occurring organic ligand to mitigate CMD and recover REEs. Techno-economic analysis (TEA) and life-cycle assessment (LCA) was carried out in the third phase. The engineering-economic costs and net energy, net CO2 emissions, and water and other requirements were investigated to understand the economic and environmental implications of this process. This work uses mass and energy balances from laboratory-scale experiments to estimate the economic costs and environmental impacts. The results suggest that passive treatment systems that use DRWP sludge are preferred over those that use sFGD material, because of lower economic costs ($89,300/yr with a unit cost of $86/gT-REE vs. $89,800/yr, or $278/gT-REE) and improved environmental performance across all indicators from two different impact assessment methods. These differences are largely attributable to the larger capacity of DRWP sludge in the passive treatment application. We envision this TEP process can be integrated with abandoned mine land (AML) reclamation to create an approach that can add economic incentives for AML reclamation, remediate CMD discharge, and eliminate public safety hazards and threats to local environment and ecological systems posed by AMLs. It can restore lands and communities that are adversely impacted by legacy mining.

01 COAL, LIGNITE, AND PEAT↗