Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aerosol Forecasting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Clouds, Aerosol, and Precipitation in the Marine Boundary Layer: An ARM Mobile Facility Deployment

Capsule: A 21-month deployment to Graciosa Island in the northeastern Atlantic Ocean is providing an unprecedented record of the clouds, aerosols and meteorology in a poorly-sampled remote marine environment The Clouds, Aerosol, and Precipitation in the Marine Boundary Layer (CAP-MBL) deployment at Graciosa Island in the Azores generated a 21 month (April 2009- December 2010) comprehensive dataset documenting clouds, aerosols and precipitation using the Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF). The scientific aim of the deployment is to gain improved understanding of the interactions of clouds, aerosols and precipitation in the marine boundary layer. Graciosa Island straddles the boundary between the subtropics and midlatitudes in the Northeast Atlantic Ocean, and consequently experiences a great diversity of meteorological and cloudiness conditions. Low clouds are the dominant cloud type, with stratocumulus and cumulus occurring regularly. Approximately half of all clouds contained precipitation detectable as radar echoes below the cloud base. Radar and satellite observations show that clouds with tops from 1- 11 km contribute more or less equally to surface-measured precipitation at Graciosa. A wide range of aerosol conditions was sampled during the deployment consistent with the diversity of sources as indicated by back trajectory analysis. Preliminary findings suggest important two-way interactions between aerosols and clouds at Graciosa, with aerosols affecting light precipitation and cloud radiative properties while being controlled in part by precipitation scavenging. The data from at Graciosa are being compared with short-range forecasts made a variety of models. A pilot analysis with two climate and two weather forecast models shows that they reproduce the observed time-varying vertical structure of lower-tropospheric cloud fairly well, but the cloud-nucleating aerosol concentrations less well. The Graciosa site has been chosen to be a permanent fixed ARM site that became operational in October 2013.

aerosols↗
NASA NTRS2019

Near Real-Time Sub/Seasonal Prediction of Aerosol at NASA Global Modeling and Assimilation Office

A new version of the coupled modeling and analysis system used to produce near real time subseasonal to seasonal forecasts was released over a year ago by the NASA/Goddard Global Modeling and Assimilation Office. The model runs at approximately 1/2 degree globally in the atmosphere and ocean, contains a realistic description of the cryosphere, and includes an interactive aerosol model. The data assimilation used to produce initial conditions is weakly coupled, in which the atmosphere-only assimilated state is coupled to an ocean data assimilation system using a Local Ensemble Transform Kalman Filter. Here will briefly describe the new system, and show results of aerosol-derived air quality from an extensive series of retrospective forecasts. The interactive aerosol is shown to improve seasonal time scale prediction skill during some "forecasts of oppurtunity". Plans for a future version of the system with predicted biomass burning from fires will also be discussed.

Molod, Andrea M.↗
NASA NTRS2008

CALIPSO Satellite Lidar Identification Of Elevated Dust Over Australia Compared With Air Quality Model PM60 Forecasts

Global measurements of the vertical distribution of clouds and aerosols have been recorded by the lidar on board the CALIPSO (Cloud Aerosol Lidar Infrared Pathfinder Satellite Observations) satellite since June 2006. Such extensive, height-resolved measurements provide a rare and valuable opportunity for developing, testing and validating various atmospheric models, including global climate, numerical weather prediction, chemical transport and air quality models. Here we report on the initial results of an investigation into the performance of the Australian Air Quality Forecast System (AAQFS) model in forecasting the distribution of elevated dust over the Australian region. The model forecasts of PM60 dust distribution are compared with the CALIPSO lidar Vertical Feature Mask (VFM) data product. The VFM classifies contiguous atmospheric regions of enhanced backscatter as either cloud or aerosols. Aerosols are further classified into six subtypes. By comparing forecast PM60 concentration profiles to the spatial distribution of dust reported in the CALIPSO VFM, we can assess the model s ability to predict the occurrence and the vertical and horizontal extents of dust events within the study area.

Young, Stuart A.↗
NASA NTRSDate not supplied

Machine Learning Algorithms for Aerosol and Cloud Detection Using CATS on the ISS

Clouds and aerosols are one of the largest uncertainties in understanding and forecasting the Earth’s changing climate system. The type and height of aerosols are important factors in determining the top-of-atmosphere (TOA) radiation budget, either direct reflection of solar radiation back to space and/or absorption of solar radiation. In addition to their impact on the Earth’s climate system, aerosols near the surface from wildfires, man-made pollution events, and dust storms are hazardous to human health. The phase and height of clouds also play a critical role in determining the role of clouds in the Earth’s climate system. Cirrus clouds in the upper troposphere can induce a significant daytime TOA warming effect, while liquid water clouds near the surface cause a large corresponding cooling effect. Lidar measurements provide accurate vertically resolved information about clouds and aerosols, including complex multi-layer scenes where passive sensors are challenged and at night, when passive sensors are unable to measure cloud and aerosol properties. The Cloud-Aerosol Transport System (CATS) is a lidar instrument that operated for 33 months on the International Space Station (ISS) at the 1064 nm wavelength to measure attenuated total backscatter and depolarization ratio. These fundamental measurements are used to derive “vertical feature mask” cloud and aerosol products, including layer top/base heights, layer geometrical thickness, aerosol type, and cloud phase. While space-based lidar systems like CATS provide cloud and aerosol vertical distributions that improve our understanding of the climate system, averaging of the daytime data from these sensors is required, at the expense of spatial resolution, to improve the daytime signal-to noise (SNR) and thus atmospheric layer detection. This presentation shows results from machine learning (ML) techniques that, when applied to CATS data: 1. improve the 1064 nm SNR 2. enable detection of atmospheric features during daytime with a horizontal resolution of 350 m or 5 km (compared to the 60 km required for standard CATS data products) 3. increase the number of atmospheric layers detected in the CATS data. A Convolutional Neural Network (CNN) trained using CATS standard data products also demonstrated the potential for improved cloud-aerosol discrimination, cloud phase, and aerosol typing compared to the operational CATS algorithms for cloud edges and complex near-surface scenes during daytime. The ML tools described in this paper can facilitate the development of smaller, low-cost lidar systems in the future and enable real-time accessibility of lidar data products from future lidar systems for monitoring and forecasting of hazardous events.

John Yorks↗
NASA NTRSDate not supplied

NASA TROPOMI Aerosol Products: Algorithmic Upgrades and Preliminary Evaluation

This poster presentation describes an expanded NASA TROPOMI (Tropospheric Monitoring Instrument)aerosol algorithm (N-TROPOMAER) that takes advantage of TROPOMI observations in the ultraviolet and visible spectral regions. The availability of the Oxygen B-band observations, and the unprecedentedly high spatial resolution (3.5 km X 5.5 km) for a hyper-spectral sensor are significant improvements for aerosol properties retrieval. The heritage N-TROPOMAER aerosol algorithm uses near-ultraviolet radiances at 354 nm and 388 nm from Sentinel 5 Precursor-TROPOMI for simultaneously retrieving aerosol optical depth (AOD), single-scattering albedo (SSA), aerosol absorption optical depth (AAOD), and above-cloud aerosol optical depth(ACAOD) at 388 nm, along with the qualitative UV aerosol index (UVAI). We have expanded the inversion capability beyond the UV, to retrieve AOD at 466 nm and 680 nm. Surface reflectance effects at466 nm are accounted for using a recently developed geometry-dependent surface Lambertian-equivalent reflectivity (GLER) product, which is derived from the top-of-atmosphere radiance computed with Rayleigh scattering and surface bidirectional reflectance distribution function (BRDF) for the exact viewing geometry at the sensor’s spatial resolution. Aerosol layer height (ALH) and 680 nm AOD are simultaneously derived from observations at 680 nm and at the Oxygen-B band (688 nm). Another important upgrade is the use of time averaged total column carbon monoxide from the NASA GEOS-CF(Global Earth Observing System Composition Forecast) as a tracer of carbonaceous aerosols.

TROPOMI↗
NASA NTRS2008

The Aerosol/Cloud/Ecosystems Mission (ACE)

The goals and measurement strategy of the Aerosol/Cloud/Ecosystems Mission (ACE) are described. ACE will help to answer fundamental science questions associated with aerosols, clouds, air quality and global ocean ecosystems. Specifically, the goals of ACE are: 1) to quantify aerosol-cloud interactions and to assess the impact of aerosols on the hydrological cycle and 2) determine Ocean Carbon Cycling and other ocean biological processes. It is expected that ACE will: narrow the uncertainty in aerosol-cloud-precipitation interaction and quantify the role of aerosols in climate change; measure the ocean ecosystem changes and precisely quantify ocean carbon uptake; and, improve air quality forecasting by determining the height and type of aerosols being transported long distances. Overviews are provided of the aerosol-cloud community measurement strategy, aerosol and cloud observations over South Asia, and ocean biology research goals. Instruments used in the measurement strategy of the ACE mission are also highlighted, including: multi-beam lidar, multiwavelength high spectra resolution lidar, the ocean color instrument (ORCA)--a spectroradiometer for ocean remote sensing, dual frequency cloud radar and high- and low-frequency micron-wave radiometer. Future steps for the ACE mission include refining measurement requirements and carrying out additional instrument and payload studies.

Schoeberl, Mark↗
NASA NTRS2007

Application of Satellite and Ground-based Data to Investigate the UV Radiative Effects of Australian Aerosols

An understanding of the effect of aerosols on biologically- and photochemically-active UV radiation reaching the Earth's surface is important for many ongoing climate, biophysical, and air pollution studies. In particular, estimates of the UV characteristics of the most common Australian aerosols will be valuable inputs to UV Index forecasts, air quality studies, and assessments of the impact of regional environmental changes. By analyzing climatological distributions of Australian aerosols we have identified sites where co-located ground-based UV-B and ozone measurements were available during episodes of relatively high aerosol activity. Since at least June 2003, surface UV global irradiance spectra (285-450 nm) have been measured routinely at Darwin and Alice Springs in Australia by the Australian Bureau of Meteorology (BoM). Using colocated sunphotometer measurements at Darwin and Alice Springs, we identified several episodes of relatively high aerosol activity. Aerosol air mass types were analyzed from sunphotometer-derived angstrom parameter, MODIS fire maps and MISR aerosol property retrievals. To assess aerosol effects we compared the measured UV irradiances for aerosol-loaded and clear-sky conditions with each other and with irradiances simulated using the libRadtran radiative transfer model for aerosol-free conditions. We found that for otherwise similar atmospheric conditions, smoke aerosols over Darwin reduced the surface UV irradiance by as much as 40-50% at 290-300 nm and 20-25% at 320-400 nm near active fires (aerosol optical depth, AOD, at 500 nm approximately equal to 0.6). Downwind of fires, the smoke aerosols over Darwin reduced the surface irradiance by 15-25% at 290-300 nm and approximately 10% at 320-350 nm (AOD at 500 nm approximately equal to 0.2). The effect of smoke increased with decrease of wavel strongest in the UV-B. The aerosol attenuation factors calculated for the selected cases suggest smoke over Darwin has an effect on surface 340-380 nm irradiances that is comparable to that produced by smoke over Sub-Saharan Africa. Dust activity was very low at Alice Springs during 2004, therefore we were not able to identify strong dust events to fully assess the UVeffect of dust. For the cases studied, smoke aerosols seem to produce a stronger reduction in surface UV irradiances than dust aerosols.

UV surface irradiances↗
NASA NTRS2007

Forecasting Plant Productivity and Health Using Diffuse-to-Global Irradiance Ratios Extracted from the OMI Aerosol Product

Atmospheric aerosols are a major contributor to diffuse irradiance. This Candidate Solution suggests using the OMI (Ozone Monitoring Instrument) aerosol product as input into a radiative transfer model, which would calculate the ratio of diffuse to global irradiance at the Earth s surface. This ratio can significantly influence the rate of photosynthesis in plants; increasing the ratio of diffuse to global irradiance can accelerate photosynthesis, resulting in greater plant productivity. Accurate values of this ratio could be useful in predicting crop productivity, thereby improving forecasts of regional food resources. However, disagreements exist between diffuse-to-global irradiance values measured by different satellites and ground sensors. OMI, with its unique combination of spectral bands, high resolution, and daily global coverage, may be able to provide more accurate aerosol measurements than other comparable sensors.

Knowlton, Kelly↗
NASA NTRS2018

Interactions Between Asian Air Pollution and Monsoon System: South Asia (ROSES-2014 ACMAP)

Asia's rapid economic growth over the past several decades has brought a remarkable increase in air pollution levels in that region. High concentrations of aerosols (also known as particulate matter or PM) from pollution sources pose major health hazards to half of the world population in Asia including South Asia. How do pollution and dust aerosols regulate the monsoon circulation and rainfall via scattering and absorbing solar radiation, changing the atmospheric heating rates, and modifying the cloud properties? We conducted a series of regional model experiments with NASA-Unified Weather Research and Forecast (NUWRF) regional model with coupled aerosol-chemistry-radiation-microphysics processes over South Asia for winter, pre-monsoon, and monsoon seasons to address this question. This study investigates the worsening air quality problem in South Asia by focusing on the interactions between pollution and South Asian monsoon, not merely focusing on the increase of pollutant emissions.

regional model experiments with NASA-Unified Weath↗
NASA NTRSDate not supplied

Challenges in Observing, Modeling, and Forecasting the June 2023 Smoke Event Over the Northeast United States

In the first week of May 2023, boreal Canada began an early start to the biomass burning season when fires erupted across Alberta and western Saskatchewan. Smoke entered the troposphere and spread across the United States as biomass burning emissions in Canada quadrupled the prior maximum since the onset of the MODIS satellite record. Adding to the already existing smoke, wildfires ignited in Quebec on June 2, 2023, producing a heavy plume of aerosol over the northeastern part of the continent. Meteorological factors, including an area of low pressure situated, nearly stationary, over Maine, transported the smoke into a densely populated corridor containing the cities of Washington, DC, Baltimore, Philadelphia, and New York City. Air quality alerts became widespread as near-surface levels of fine particulate matter (PM2.5) exceeded harmful levels due the low altitude of the smoke plume. Forecasting the smoke transport and impacts of such events requires a complex combination of observed initial conditions for meteorology and aerosols, knowledge of the emissions from wildfires, and a state-of-the-art Earth System model that couples these components together. Using a case-study perspective with the Goddard Earth Observing System (GEOS), challenges associated with near real time forecasting of the smoke plume are presented. Analyzed and forecasted aerosol optical depth will be evaluated using available satellite and AERONET observations, while surface aerosol will be assessed relative to observations of PM2.5. Lacking real time estimates of biomass burning emissions for inputs to our forecast model, particular attention is given to the use of day-old biomass burning emissions throughout the forecast period covering the first ten days in June 2023, and the resulting reduction in forecast skill will be quantified.

Allison Collow↗
NASA NTRSDate not supplied

Challenges in Observing, Modeling, and Forecasting the June 2023 Smoke Event over the Northeast United States

In the first week of May 2023, boreal Canada began an early start to the biomass burning season when fires erupted across Alberta and western Saskatchewan. Smoke entered the troposphere and spread across the United States as biomass burning emissions in Canada quadrupled the prior maximum since the onset of the MODIS satellite record. Adding to the already existing smoke, wildfires ignited in Quebec on June 2, 2023, producing a heavy plume of aerosol over the northeastern part of the continent. Meteorological factors, including an area of low pressure situated, nearly stationary, over Maine, transported the smoke into a densely populated corridor containing the cities of Washington, DC, Baltimore, Philadelphia, and New York City. Air quality alerts became widespread as near-surface levels of fine particulate matter (PM2.5) exceeded harmful levels due the low altitude of the smoke plume. Forecasting the smoke transport and impacts of such events requires a complex combination of observed initial conditions for meteorology and aerosols, knowledge of the emissions from wildfires, and a state-of-the-art Earth System model that couples these components together. Using a case-study perspective with the Goddard Earth Observing System (GEOS ), challenges associated with near real time forecasting of the smoke plume are presented. Analyzed and forecasted aerosol optical depth will be evaluated using available satellite and AERONET observations, while surface aerosol will be assessed relative to observations of PM2.5. Lacking real time estimates of biomass burning emissions for inputs to our forecast model, particular attention is given to the use of day-old biomass burning emissions throughout the forecast period covering the first ten days in June 2023, and the resulting reduction in forecast skill will be quantified.

Allison Collow↗
DOE OSTI2025

Using feature importance as an exploratory data analysis tool on Earth system models

Abstract. Machine learning (ML) models are commonly used to generate predictions, but these models can also support the discovery of new science. Generating accurate predictions necessitates that a model captures the structure of the underlying data. If the structure is properly extracted, ML could be a useful exploratory and evidential tool. In this paper, we present a case study that demonstrates the use of ML for exploratory data analysis (EDA) in the climate space. We apply the ML explainability method of spatiotemporal zeroed feature importance (stZFI) to understand how climate-variable associations evolve over space and time. Our analyses focus on data from ensembles of Earth system models (ESMs) which provide data on different climate states and conditions. We elect to work with ESM ensembles since they allow us to compare feature importance across alternative scenarios not available with observed data. The ensembles also account for natural variability so that we can distinguish between signal and noise due to natural climate variability when computing feature importance. The use of perturbed initial condition ensembles introduces variability mimicking the natural variability in the atmosphere; thus the signals emerging using feature importance (FI) can be evaluated against the natural variability in the climate system. For our analyses, we consider the 1991 volcanic eruption of Mount Pinatubo, which was a large stratospheric aerosol injection. We explore the climate pathway associated with the eruption from aerosols to radiation to temperature at both the near-surface and stratospheric levels. In addition to applying the method to data generated from two different ESMs, we apply stZFI to reanalysis data to compare the associations identified by stZFI. We show how stZFI tracks the importance of aerosol optical depth over time on forecasting temperatures. This case study illustrates usefulness of an ML tool (stZFI) for EDA on a well-studied climate exemplar.

Ries, Daniel (ORCID:0000000250294647)↗
NASA NTRS1984

Observing system simulation experiments related to space-borne Lidar wind profiling. Part 1: Forecast impacts of highly idealized observing systems

Simulation experiments comparing the relative importance of an idealized LIDAR wind profiling system with idealized temperature and pressure sounding systems on 12 h forecasts are studied for three "nature' fields representing the true evolving atmospheric states. The three fields are obtained respectively from: (1) a long integration of the GLAS 4th Order Model (4 deg lat x 5 deg lon x 9 levels), (2) a continuous sequence of NMC operational analysis and, (3) a long integration of the ECMWF high resolution (1.875 deg 1 lat x 1.875 deg lon x 15 layers) operational forecast model. These fields are interpolated to the grid of the GLAS model and used for simulating the observed global analysed fields of winds, temperature, moisture and surface pressure. The same interpolated fields are also used for verification of forecast impact. The effects of clouds, aerosol concentrations, and instrument accuracies on the simulated observation will be discussed.

Halem, M.↗
NASA NTRS2014

Impact of Assimilated and Interactive Aerosol on Tropical Cyclogenesis

This article investigates the impact 3 of Saharan dust on the development of tropical cyclones in the Atlantic. A global data assimilation and forecast system, the NASA GEOS-5, is used to assimilate all satellite and conventional data sets used operationally for numerical weather prediction. In addition, this new GEOS-5 version includes assimilation of aerosol optical depth from the Moderate Resolution Imaging Spectroradiometer (MODIS). The analysis so obtained comprises atmospheric quantities and a realistic 3-d aerosol and cloud distribution, consistent with the meteorology and validated against Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) and CloudSat data. These improved analyses are used to initialize GEOS-5 forecasts, explicitly accounting for aerosol direct radiative effects and their impact on the atmospheric dynamics. Parallel simulations with/without aerosol radiative effects show that effects of dust on static stability increase with time, becoming highly significant after day 5 and producing an environment less favorable to tropical cyclogenesis.

dust↗
DOE OSTI2020

A new parameterization of ice heterogeneous nucleation coupled to aerosol chemistry in WRF-Chem model version 3.5.1: evaluation through ISDAC measurements

In the Arctic, during polar night and early spring, ice clouds are separated into two leading types of ice clouds (TICs): (1) TIC1 clouds characterized by a large concentration of very small crystals and TIC2 clouds characterized by a low concentration of large ice crystals. Using a suitable parameterization of heterogeneous ice nucleation is essential for properly representing ice clouds in meteorological and climate models and subsequently understanding their interactions with aerosols and radiation. Here, we describe a new parameterization for ice crystal formation by heterogeneous nucleation in water-subsaturated conditions coupled to aerosol chemistry in the Weather Research and Forecasting model coupled with chemistry (WRF-Chem). The parameterization is implemented in the Milbrandt and Yau (2005a, b) two-moment cloud microphysics scheme, and we assess how the WRF-Chem model responds to the run-time interaction between chemistry and the new parameterization. Well-documented reference cases provided us with in situ data from the spring 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) over Alaska. Our analysis reveals that the new parameterization clearly improves the representation of the ice water content (IWC) in polluted or unpolluted air masses and shows the poor performance of the reference parameterization in representing ice clouds with low IWC. The new parameterization is able to represent TIC1 and TIC2 microphysical characteristics at the top of the clouds, where heterogenous ice nucleation is most likely occurring, even with the known bias of simulated aerosols by WRF-Chem over the Arctic.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2005

Assimilation of ozone profiles from the Improved Limb Atmospheric Spectrometer: Study on Antarctic Ozone - 2

Ozone data from the Improved Limb Atmospheric Spectrometer-II (ILAS-II) were included in addition to other satellite observations in the ozone assimilation system at the Global Modeling and Assimilation Office (GMAO) of NASA/Goddard. The control run assimilated data from NOAA 16 Solar Backscatter Ultraviolet/2 (SBUV/2) and Polar Ozone and Aerosol Measurement III (POAM III) instruments. Persistent impacts over Antarctica and transient impacts over northern middle and high latitudes are seen from April to October 2003, when ILAS-II provided good coverage. The largest improvements with respect to independent ozone sonde data are seen over the South Pole station. Ozone analyses and forecasts from the assimilation of SBUV/2, POAM III and ILAS-II data b e used to investigate the transport of ozone to southern middle latitudes following the breakup of the Antarctic vortex. The quality of analyses and forecasts is evaluated by comparison with independent Stratospheric Aerosol and Gas Experiment III (SAGE III) ozone data near 46degs. Anomaly correlations between SAGE III data and forecasts'exceed 0.6 for up to five to seven days at 30,50, and 70 ma. The loss of skill with advancing forecast length is related to dynamical errors due to an excessively persistent vortex in longer forecasts, which hampers the transport of low ozone air into middle latitudes.

Stajner, Ivanka↗
DOE OSTI2023

Subsetted model output for aerosol-related variables from a LASSO-CACTI WRF simulation

Aerosol-related model output from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. This version of the output is a collection of variables subsetted from the raw WRF output to reduce the file overhead for users not needing the full raw dataset. The subset files are in netCDF format with the height-based variables on the raw, model eta levels. The aerosol properties are consistent with the Thompson aerosol-aware cloud microphysics scheme where the simulated aerosol are proxies for representative “water friendly” and “ice friendly” aerosol.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2010

Online Simulations of Global Aerosol Distributions in the NASA GEOS-4 Model and Comparisons to Satellite and Ground-Based Aerosol Optical Depth

We have implemented a module for tropospheric aerosols (GO CART) online in the NASA Goddard Earth Observing System version 4 model and simulated global aerosol distributions for the period 2000-2006. The new online system offers several advantages over the previous offline version, providing a platform for aerosol data assimilation, aerosol-chemistry-climate interaction studies, and short-range chemical weather forecasting and climate prediction. We introduce as well a methodology for sampling model output consistently with satellite aerosol optical thickness (AOT) retrievals to facilitate model-satellite comparison. Our results are similar to the offline GOCART model and to the models participating in the AeroCom intercomparison. The simulated AOT has similar seasonal and regional variability and magnitude to Aerosol Robotic Network (AERONET), Moderate Resolution Imaging Spectroradiometer, and Multiangle Imaging Spectroradiometer observations. The model AOT and Angstrom parameter are consistently low relative to AERONET in biomass-burning-dominated regions, where emissions appear to be underestimated, consistent with the results of the offline GOCART model. In contrast, the model AOT is biased high in sulfate-dominated regions of North America and Europe. Our model-satellite comparison methodology shows that diurnal variability in aerosol loading is unimportant compared to sampling the model where the satellite has cloud-free observations, particularly in sulfate-dominated regions. Simulated sea salt burden and optical thickness are high by a factor of 2-3 relative to other models, and agreement between model and satellite over-ocean AOT is improved by reducing the model sea salt burden by a factor of 2. The best agreement in both AOT magnitude and variability occurs immediately downwind of the Saharan dust plume.

Colarco, Peter↗