Search NASA⌕ Search

SEARCH · Search NASA

Results for “Alumina”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1969

Impurity deposits on alumina crystals.

Silicate glass impurity droplet formations on alumina single crystals polished surfaces analyzed by electron microprobe as function of high temperature

Scott, W. D.↗
NASA NTRS1972

Dispersion-strengthened nickel-alumina alloy produced from comminuted powders

An investigation was conducted to determine whether a nickel - 2-volume-percent alumina dispersion-strengthened material with a fine, uniformly distributed dispersoid could be produced, which was equivalent in short time tensile strength to commercially available thoriated sheet materials. Comminution and blending with a modified triple stirrer attritor and a hydrogen and vacuum precleaning treatment prior to consolidation were used. A product with a fine dispersoid with an average particle size of 0.04 micron and an interparticle spacing of 0.7 micron was achieved. This material has a 1093 C (2000 F) short time tensile strength of 117 MN/sq m (16 900 psi).

Sikora, P. F.↗
NASA NTRS1973

Single crystal tubes of beta alumina

Edge-defined, film-fed growth process allows both tubular shapes and single crystallinity to be achieved. Beta alumina in single crystal form makes possible membranes with improved conductivities. Single crystal membranes also eliminate problems associated with electrical short circuiting of membrane due to possible sodium metal diffusion.

Stormont, R. W.↗
NASA NTRS1972

Thermal expansion compatibility of ceramic chip capacitors mounted on alumina substrates.

The thermal expansion coefficients of a representative sample of BaTiO3 and TiO2 ceramic chip capacitors and alumina substrates have been examined. These data have revealed large potential mechanical stresses under thermal cycling. A mathematical analysis of a composite model of the capacitor to predict the thermal expansion and modulus of elasticity and an analysis of the capacitor-substrate system to predict the magnitude of thermally induced stresses have been conducted. In all cases studied, thermally induced stresses great enough to cause capacitor body rupture or termination failure was predicted.

Allen, R. V.↗
NASA NTRS1974

Conductivity of boules of single crystal sodium beta-alumina

The ionic and electrochemical polarization characteristics of two boules of single crystal sodium beta-alumina (Na2O.8Al2O3), 2 cm in diameter, were investigated over the range of 25 to 300 C using 2- and 4-probe ac and dc techniques with reversible and ion-blocking electrodes. Textural (or internal) polarization at 27 C was present only in boule 1 which cleaved easily. Interfacial polarization, using solid sodium electrodes, was present at 27 C in the 2-probe conductivities for both boules. Cleaning with liquid sodium at 300 C reduced its magnitude, but some interfacial polarization was still present in the 2-probe conductivities for boule 2 below about 140 C. Above 140 C, with liquid sodium electrodes, the 2-probe conductivities, essentially polarization-free, were given by KT = 3300 exp(-3650/RT). The conductivity of boule 2 at 180 C remained essentially constant with increasing current density up to about 140 milliamps per square centimeter.

Fielder, W. L.↗
NASA NTRS1975

Feasibility and process scale-up low cost alumina fibers for advanced Re-usable Surface Insulation (RSI)

The objective of this program was to establish feasibility of a process to produce low cost aluminum oxide fibers having sufficient strength, flexibility, and thermal stability for multiple re-use at temperatures to 1480 C in advanced RSI type heat shields for reentry vehicles. Using bench-scale processing apparatus, the Alcoa 'Saphiber' process was successfully modified to produce nominally 8 microns diameter polycrystalline alpha-alumina fiber. Thermal stability was demonstrated in vacuum reheating tests to 1371 C and in atmospheric reheating to 1483 C. Individual fiber properties of strength, modulus, and flexibility were not determined because of friability and short length of the fiber. Rigidized tile produced from fiber of nominally 8, 20 and 40 micron diameter had thermal conductivities significantly higher than those of RSI SiO2 or mullite at relatively low temperature but became comparable above about 1000 C. Tile densities were high due to short fiber length, especially in the coarser diameter fiber. No significant effect of fiber diameter on thermal properties could be determined form the data. Mechanical properties of tiles deteriorated as fiber diameter increased.

Pearson, A.↗
NASA NTRS1977

Effect of microstructure on Na/+/ diffusion in beta alumina

The effect of microstructural features, such as grain size and orientation, on sodium ion diffusion in polycrystalline beta alumina is investigated; the ionic solid is suitable for use in high-energy and power density batteries. Two types of hot-pressed polycrystalline samples are studied, one with grains highly oriented in the direction normal to the pressing direction, the other with significantly less preferred orientation normal to the pressing direction. Results of the experimental assessments indicate that grain size and diffusion path tortuosity have little effect on diffusion kinetics, while grain boundary type and grain aspect ratio are important factors in determining the diffusion rate.

Sarian, S.↗
NASA NTRS1979

Controlled metal-film deposition on alumina substrates

Report describes results of investigation of preparation, nucleation and controlled growth of particulate deposits (palladium and iron) on electron-transparent alumina substrates. Results indicate that characteristic properties of metal deposits are strongly dependent on cleanliness, phase, and crystallographic orientation of substrate.

Lee, E. H.↗
NASA NTRS1979

Thermal exposure effects on the mechanical properties of a polycrystalline alumina fiber/aluminum matrix composite

The effects of thermal exposures and elevated test temperature on the mechanical properties of a unidirectional polycrystalline alumina fiber reinforced aluminum matrix composite were investigated. Test temperatures up to 590 K and 2500 hours exposures at 590 K did not significantly affect fiber dominated properties but did severely degrade matrix dominated properties. Fiber strength, degraded by the fabrication process, was restored by post fabrication thermal exposures. Possible degradation mechanisms are discussed.

Olsen, G. C.↗