Search NASA⌕ Search

SEARCH · Search NASA

Results for “Au nanoparticles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

Linker-free magnetite nanoparticles (Fe3O4NPs)-decorated gold nanoparticles (AuNPs) were grown using a new protocol that can be used as a new platform for synthesis of other intact metal–metal oxide nanocomposites without the need for linkers. This minimizes the distance between the metal and metal oxide nanoparticles and ensures the optimum combined effects between the two material interfaces. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the Fe3O4-Au nanocomposite, without any change in the magnetite phase. Characterization, using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, revealed the composite to consist of AuNPs of 70 ± 10 nm diameter decorated with tiny 10 ± 3 nm diameter Fe3O4NPs in Au:Fe mass ratio of 5:1. The prepared Fe3O4-Au nanocomposite was embedded in ionic liquid (IL) and applied for the modification of glassy carbon electrode (GCE) for the electrochemical detection of As(III) in water. By combining the excellent catalytic properties of the AuNPs with the high adsorption capacity of the tiny Fe3O4NPs towards As(III), as well as the good conductivity of IL, the Fe3O4-Au-IL nanocomposite showed excellent performance in the square wave anodic stripping voltammetry detection of As(III). Under the optimized conditions, a linear range of 1 to 100 μg/L was achieved with a detection limit of 0.22 μg/L (S/N = 3), and no interference from 100-fold higher concentrations of a wide variety of cations and anions found in water. A very low residual standard deviation of 1.16% confirmed the high precision/reproducibility of As(III) analysis and the reliability of the Fe3O4-Au-IL sensing interface. Finally, this proposed sensing interface was successfully applied to analyzing synthetic river and wastewater samples with a 95–101% recovery, demonstrating excellent accuracy, even in complex synthetic river and wastewater samples containing high concentrations of humic acid without any sample pretreatments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single atoms and small clusters of atoms may accompany Au and Pd dendrimer-encapsulated nanoparticles

Here we report the presence of small clusters of atoms (<1 nm) (SCs) and single atoms (SAs) in solutions containing 1–2 nm dendrimer-encapsulated nanoparticles (DENs). Au and Pd DENs were imaged using aberration-corrected scanning transmission electron microscopy (ac-STEM), and energy dispersive spectroscopy (EDS) was used to identify and quantify the SAs/SCs. Two main findings have emerged from this work. First, the presence or absence of SAs/SCs depends on both the terminal functional group of the dendrimer (–NH 2 or –OH) and the elemental composition of the DENs (Au or Pd). Second, dialysis can be used to remove the majority of SAs/SCs in cases where a high density of SAs/SCs are present. The foregoing conclusions provide insights into the mechanisms for Au and Pd DEN synthesis and stability. Ultimately, these results demonstrate the need for careful characterization of systems containing nanoparticles to ensure that SAs/SCs, which may be below the detection limit of most analytical methods, are taken into consideration (especially for catalysis experiments).

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Nanoscale wetting controls reactive Pd ensembles in synthesis of dilute PdAu alloy catalysts

The performance of bimetallic dilute alloy catalysts is largely determined by the size of minority metal ensembles on the nanoparticle surface. By analyzing the synthesis of catalysts comprising Pd 8 Au 92 nanoparticles supported on silica using surface-sensitive techniques, we report that whether Pd overgrowth occurs before or after Au nanoparticle deposition onto the support controls the surface Pd ensemble size and abundance. These differences in Pd ensembles influence catalytic reactivity in H 2 –D 2 isotope exchange and benzaldehyde hydrogenation, which, in correlation with theoretical calculations, is used to elucidate the active site(s) in each reaction. To clarify how the synthetic sequence controls the formation of Pd ensembles, we combine numerical wetting calculations and molecular dynamics simulations (with a machine-learned force field) to visualize Pd deposition and migration on the nanoparticle surface, respectively. Our results suggest that the nanoparticle–support interface restricts nanoparticle accessibility to Pd deposition, which consequently controls the Pd ensemble size, illustrating the critical role of nanoscale wetting phenomena during bimetallic catalyst preparation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Role of Metal Cocatalysts in the Photocatalytic Production of Hydrogen from Water Revisited

The use of photocatalysts to promote the production of molecular hydrogen from water, following the so-called water splitting reaction, continues to be a promising route for the green production of fuels. The molecular basis of this photocatalysis is the photoexcitation of electrons from the valence band of semiconductors to their conduction band, from which they can be transferred to chemical reactants, protons in the case of water, to promote a reduction reaction. The mechanism by which such a process takes place has been studied extensively using titanium oxide, a simple material that fulfills most requirements for water splitting. However, photocatalysis with TiO 2 tends to be highly inefficient; a cocatalyst, commonly a late transition metal (Au, Pt) in nanoparticle form, needs to be added to facilitate the production of H 2 . The metal is widely believed to help with the scavenging of the excited electrons from the conduction band of the semiconductor in order to prevent their recombination with the accompanying hole formed in the valence band, a step that cancels the initial photon absorption and competes with the photolytic chemical reduction. Here we review and analyze the molecular basis for that mechanism and argue for an alternative explanation, that the role of the metal is to help with the recombination of the atomic hydrogen atoms produced by proton reduction on the semiconductor surface instead. First, we summarize what is known about the electronic structure of these photocatalysts and how the electronic levels need to line up for the reduction of protons in water to be feasible. Next, we review the current understanding of the dynamics of the steps associated with the absorption of photons, the de-excitation via electron–hole pair recombination and fluorescence decay, and the electronic transitions that lead to proton reduction, and contrast those with the rates of the chemical steps required to produce molecular hydrogen. The following section addresses the changes introduced by the addition of the metal cocatalyst, comparatively evaluating its role as either an electron scavenger or a promoter of the recombination of hydrogen atoms. A discussion of the viable chemical mechanisms for the latter pathway is included. Finally, we briefly mention other associated aspects of this photocatalysis, including the possible promotion of H 2 production with visible light via resonant excitation of the surface plasmon of Au nanoparticles, the use of single-metal (Au, Pt) atom catalysts and of yolk–shell nanostructures, and the reduction of organic molecules. We end with a brief personal perspective on the possible generality of the concepts introduced in this Critical Review.

08 HYDROGEN↗
DOE OSTI2021

H 2 O-assisted O 2 reduction by H 2 on Pt and PtAu bimetallic nanoparticles: Influences of composition and reactant coverages on kinetic regimes, rates, and selectivities

Hydrogen peroxide (H 2 O 2 ) can replace hazardous oxidants in industrial processes but is currently too expensive for many such applications. While direct synthesis of H 2 O 2 (H 2 + O 2 → H 2 O 2 ) may reduce costs in comparison to incumbent technology, current catalysts lack the requisite stability and selectivity. Here, we examine the direct synthesis of H 2 O 2 on bimetallic Pt 1 Au x (0 ≤ x ≤ 230) and Pt catalysts at steady-state in pure water and relate kinetic parameters for H 2 O 2 and H 2 O formation to possible active site structures informed by complementary characterization methods. X-ray photoelectron spectra show significant Pt surface enrichment compared to the bulk composition. Analysis of infrared spectra of mixed monolayers of 12 CO* and 13 CO* indicate that Pt and Au form substitutional surface alloys. The Pt 1 Au x nanoparticles with the greatest mole fractions of Au predominantly expose Pt monomers (i.e., isolated Pt atoms), yet Pt atoms exposed upon all these nanoparticles possess electronic structures distinct from bulk Pt. Despite these differences, rate measurements are consistent with product formation through proton-electron transfer pathways for all Pt 1 Au x catalysts. In situ XAS indicate that Pt remains metallic during H 2 O 2 synthesis. Under the most oxidizing conditions, selectivities toward H 2 O 2 increase strongly with the Au to Pt ratio from 2% for monometallic Pt to 85% for Pt 1 Au 170 . However, selectivities are similar among all catalysts within reducing conditions. Comparisons of apparent activation enthalpies for the formation of H 2 O 2 and H 2 O across these catalysts and the range of conditions suggest that Pt monomers within Au provide the greatest selectivities for H 2 O 2 formation, because these active sites present high barriers for O-O bond rupture. Further, selectivities decrease with increasing ratios of H 2 to O 2 pressures, because Pt atoms aggregate and form oligomers that readily dissociate dioxygen intermediates. The combined use of spectroscopy, kinetics, and concepts employed in reaching these conclusions take inspiration from the legacy of Prof. Michel Boudart, and specifically his elegant methods for interrogating bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Au x Pd (300‐ x ) Alloy Nanoparticles for the Oxygen Reduction Reaction in Alkaline Media

Abstract Au x Pd (300‐ x ) nanoalloys were prepared using a dendrimer‐templating method and their electrocatalytic efficiencies towards the oxygen reduction reaction (ORR) were analyzed in alkaline media. The composition‐dependent PdO x reduction potentials of the Au x Pd (300‐ x ) nanoalloys were correlated to the oxygen‐binding (O‐binding) energy of the catalysts. Multiple PdO x reduction peaks were present for the Au 150 Pd 150 and Au 50 Pd 250 catalysts. These peaks were assigned to the alloyed and bulk‐like Pd active sites on the alloyed surface. The results described here are significant because modulation of the O‐binding energies improved the ORR activity on the nanoalloys. Specifically, a linear trend in O‐binding energies of Au x Pd (300‐ x ) dendrimers (DENs) as a function of Pd composition resulted in a volcano‐shaped trend in ORR activity. The optimal O‐binding energy of Au 50 Pd 250 resulted in an approximate 89 mV shift in PdO x reduction relative to Pd 300 and a shift of approximately 76 mV in ORR peak potential.

Trindell, Jamie A.↗
DOE OSTI2022

Hydrogen Dissociation Controls 1-Hexyne Selective Hydrogenation on Dilute Pd-in-Au Catalysts

Increasing the selectivity of the catalytic hydrogenation of alkynes to alkenes is of major importance for the processing of petrochemicals and the production of fine chemicals. Achieving high selectivity for alkene formation at high conversions, however, remains a long-standing challenge in heterogeneous catalysis. Here, the mechanism and origin of the high selectivity of dilute Pd-in-Au catalysts has been studied by a combination of first-principles calculations, microkinetic simulations, and isotopic exchange hydrogenation experiments using Pd 0.04 Au 0.96 nanoparticles embedded in raspberry colloid-templated silica. The Pd is predominantly in the form of isolated atoms, only surrounded by Au atoms, based on prior studies. The simulations indicate that the rate-limiting process for 1-hexyne hydrogenation on Pd monomers in Au(111) is H 2 dissociation, which has a large free energy barrier of 0.86 eV at 363 K and 0.2 bar of H 2 . The C–H bond formation steps, on the other hand, proceed with lower barriers, which contrasts with previous studies of extended Pd catalysts. The microkinetic simulations identify the sizable H 2 dissociation barrier and the small barrier for the hydrogenation of 1-hexyne as key factors that lead to a high selectivity for the production of 1-hexene from 1-hexyne, even at high conversion. The unconventional H 2 dissociation limiting process in combination with the low coverage of weakly bound hydrocarbon intermediates explains the near-zero order of 1-hexyne found experimentally. Furthermore, the partial hydrogenation of 1-hexyne to form 1-hexene is shown to be an irreversible process from our isotopic exchange hydrogenation experiments and is explained by the strongly exothermic nature of the reaction. Diluting active species, like Pd, in a less active host metal, like Au, hence appears promising as a means of tuning the binding energy of reactants and altering reaction profiles, leading to distinct kinetic behavior for an optimal catalytic activity and selectivity. Furthermore, the combination of microkinetic modeling, density functional theory calculations, and isotopic exchange experiments is thus demonstrated to be an effective approach to modeling important catalytic phenomena.

1-hexyne↗
DOE OSTI2024

Engineering Ultrathin Alloy Shell in Au@AuPd Core-Shell Nanoparticles for Efficient Plasmon-Driven Photocatalysis

Bimetallic core-shell nanoparticles (NPs) possessing a synergetic coupling of plasmonic and catalytic metals have emerged as promising prototypes for efficient plasmon-driven photocatalysis. Here, Au@AuPd core-shell NPs composed of Au core NP and ultrathin AuPd shell are introduced to acquire improved light utilization efficiency in photocatalytic selective oxidation. With systematical control of the composition of the ultrathin alloy shell, it reveals that the Au@AuPd core-shell NPs with 10 at% Pd (in the single-atom alloy regime) is an effective nanostructure capable of maximizing the quantum yield of plasmon-induced light absorption and optimizing the surface electronic structure for catalytic reactions. This controlled system provides new insights into shell engineering for enhancing photocatalytic performance via the regulation of energy funneling processes in core-shell nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Au and Pt Remain Unoxidized on a CeO 2 -Based Catalyst during the Water–Gas Shift Reaction

The active form of Au and Pt in CeO 2 based catalysts for the WGS reaction is an issue that although it has been widely studied remains unclear. On one hand, ionic species might be responsible of weakening the Ce-O bonds increasing the oxygen mobility and WGS activity. On the other hand, the close contact of Au or Pt atoms with CeO 2 oxygen vacancies at the metal/CeO 2 interface might provide the active sites for an efficient reaction. In this work, by using in-situ X-ray absorption spectroscopy, we demonstrate that both Au and Pt remain unoxidized during the reaction. Here, remarkable differences involving the dynamics established by both species under WGS atmospheres were recognized. For the pre-reduced Pt catalyst, an increase of the conversion coincided with a re-structuration of the Pt atoms into cuboctahedrical metallic particles without significant variations on the overall particle size. Contrary to the relatively static behavior of Pt 0 , Au 0 nanoparticles exhibited a sequence of particle splitting and agglomeration whilst maintaining a zero oxidation state, even though not being located in a metallic environment during the process. High WGS activity was obtained when Au atoms were surrounded by oxygen. The fact that Au preserves its unoxidized state indicates that the chemical interaction between Au and oxygen must be necessarily electrostatic being such electrostatic interaction fundamental for a top performance in the WGS process.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic and Optical Properties of Au–Co Solid Solution and Phase-Separated Thin Films and Nanoparticles

The chemical composition and morphology of Au x Co 1–x thin films and nanoparticles are controlled via a combination of cosputtering, pulsed laser-induced dewetting (PLiD), and annealing, leading to tunable magnetic and optical properties. Regardless of chemical composition, the as-deposited thin films and as-PLiD nanoparticles are found to possess a face-centered cubic (FCC) Au x Co 1–x solid-solution crystal structure. Annealing results in large phase-separated grains of Au and Co in both the thin films and nanostructures for all chemical compositions. The magnetic and optical properties are characterized via vibrating sample magnetometry (VSM), ellipsometry, optical transmission spectroscopy, and electron energy loss spectroscopy (EELS). Despite the exceptionally high magnetic anisotropy inherent to Co, the presence of sufficient Au (72 atom %) in the Au x Co 1–x solid solution results in superparamagnetic thin films. Among the as-PLiD nanoparticle samples, an increased Co composition leads to a departure from traditional ferromagnetism in favor of wasp-waisted hysteresis caused by magnetic vortices. Phase separation resulting from annealing leads to ferromagnetism for all compositions in both the thin films and nanoparticles. The optical properties of Au x Co 1–x nanostructures are also largely influenced by the chemical morphology, where the Au x Co 1–x intermixed solid solution has significantly damped plasmonic performance relative to pure Au and comparable to pure Co. Phase separation greatly enhances the quality factor, optical absorption, and electron energy loss spectroscopy (EELS) signatures. The enhancement of the localized surface plasmon resonances (LSPRs) scales with the reduction in Co composition, despite EELS evidence that excitation of the Co portions of a nanoparticle can provide a similar, and in some instances enhanced, LSPR resonance compared to Au. This behavior, however, is seemingly limited to the LSPR dipole mode, while higher-order modes are greatly damped by a Co aloof position. As a result, this observed magneto-plasmonic functionality and tunability could be applicable in biomedicine, namely, cancer therapeutics.

annealing (metallurgy)↗
DOE OSTI2025

Annealing-Driven Phase Control Enables Plasmonic Tunability in Alloy Nanoparticles

A critical aspect of designing and realizing useful solid state materials is controlling phase and structure to tailor physical properties. While common for semiconductor and quantum materials, plasmonic materials have inhabited a narrow phase space typically comprising one or two elements, e.g., face-centered cubic metals. While this simplicity has enabled robust use and understanding of Au and Ag nanoparticles, it has also limited the design and manipulation of solid state properties. Here, we show that by tuning the phase and elemental composition of binary Au−Sn nanoparticles, the steady-state absorbance and ultrafast thermalization properties of plasmonic nanoparticles can be controlled. Solid state characterization suggests this is due to the dealloying of Sn and destabilization of the AuSn phase, leading to higher quality Au 5 Sn intermetallic phases alongside Au. Consequently, this work shows that phase control can profoundly influence the properties of plasmonic nanoparticles, providing important tunability for applications in catalysis, photothermal heating, and sensing.

Gold↗
DOE OSTI2021

Synergistic Integration of Chemo-Resistive and SERS Sensing for Label-Free Multiplex Gas Detection

Practical sensing applications such as real-time safety alerts and clinical diagnoses require sensor devices to differentiate between various target molecules with high sensitivity and selectivity, yet conventional devices such as oxide-based chemo-resistive sensors and metal-based surface-enhanced Raman spectroscopy (SERS) sensors usually do not satisfy such requirements. In this report a label-free, chemo-resistive/SERS multimodal sensor based on a systematically assembled 3D cross-point multifunctional nanoarchitecture (3D-CMA), which has unusually strong enhancements in both “chemo-resistive” and “SERS” sensing characteristics is introduced. 3D-CMA combines several sensing mechanisms and sensing elements via 3D integration of semiconducting SnO 2 nanowire frameworks and dual-functioning Au metallic nanoparticles. It is shown that the multimodal sensor can successfully estimate mixed-gas compositions selectively and quantitatively at the sub-100 ppm level, even for mixtures of gaseous aromatic compounds (nitrobenzene and toluene) with very similar molecular structures. This is enabled by combined chemo-resistive and SERS multimodal sensing providing complementary information.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Controlling the Aspect Ratios of Au Nanocrystals with Ag+ Addition Time in Seed-Mediated Synthesis: Implications for Surface-Enhanced Raman Scattering

Among various factors playing pivotal roles in the typical seed-mediated growth of Au nanocrystals (NCs), the role of Ag (AgNO3) has remained debatable over time and seminal research efforts have helped us in reaching a consensus, albeit from the standpoint of [Ag+] concentration. This study aims to provide an understanding of the role of Ag+ from the perspective of time. Here, we show that different Au NCs with tunable aspect ratios (ARs) can be generated in one system in high yield simply by varying the time of addition of Ag+ in the growth solution. The generality of the method has been demonstrated in tuning the ARs of anisotropic Au NCs like concave cuboid (CCB, AR = 2) and elongated tetrahexahedra (AR = 2.5), where the delayed addition of Ag+ leads to the formation of their isotropic counterpart concave cube (CC, AR = 1) and tetrahexahedra (AR = 1), respectively. This work, apart from establishing timed addition of Ag+ as a crucial parameter in controlling the AR, may also help in the realization of a universal growth mechanism of Au NCs. The Au NCs with varying ARs (CCB, AR = 2 and CC, AR = 1) have been further explored as potential substrates for surface-enhanced Raman scattering (SERS) due to the presence of their high-index facets and sharp tips.

KEYWORDS:Au nanoparticles seed-mediated growth hig↗