Search NASA⌕ Search

SEARCH · Search NASA

Results for “Auger electron spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Si-based materials for lithium-ion batteries XI. 70% surface-modified Si/C/perfluorooctene-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C/perfluorooctene-carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping (CAMP) Facility, Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.83 401 nm). A survey spectrum together with O 1s, C 1s, and Si 2p are presented. The spectra indicate the principal core level photoelectron and Auger electron signals with only minor sodium, copper, calcium, and lithium signals and show the expected silicon-carbon, carbon-fluorine, and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries III: Surface-modified Si/C/polyvinylidine difluoride powder

X-ray photoelectron spectroscopy was used to analyze Si/C/polyvinylidine difluoride powder obtained from Paraclete Energy Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with F 1s, O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected silicon-carbon and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries IV: Surface-modified Si/C/perfluorooctene powder

X-ray photoelectron spectroscopy was used to analyze nano-Si/C/perfluorooctene powder obtained from Paraclete Energy Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with F 1s, O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected silicon-carbon, carbon-fluorine, and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries VIII. 90% surface-modified Si/C-lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 90% Si/C-lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor lithium signal and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well contributions related to the binder material.

25 ENERGY STORAGE↗
DOE OSTI2021

Observation of biexciton emission from single semiconductor nanoplatelets

Quasi-two-dimensional semiconductor nanoplatelets (NPLs) are intriguing systems for studying the influence of Auger recombination processes on the multiexciton emission efficiencies in the weak in-plane confinement regime. We investigate CdSe/CdS core/shell NPLs using cryogenic temperature single particle spectroscopy and observe bright biexciton emission at high excitation powers. The average binding energy of the biexcitons is determined to be 16.5 meV. The observed switching between the biexciton and trion states indicates charging-decharging dynamics of the NPLs mediated by the Auger ionization process. These findings are highly relevant for harvesting efficient biexciton emission for energy, lighting, and quantum applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries IX: 70% surface-modified Si/C/polyethylene glycol-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C-carbon black/polyethylene glycol/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey scan was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor copper and lithium signals and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well as contributions related to the binder material.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries VII. 70% surface-modified Si/C-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy (XPS) was used to analyze a 70% Si/C-carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor copper, nitrogen, calcium, and lithium signals and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well contributions related to the binder material.

25 ENERGY STORAGE↗
DOE OSTI2022

High-resolution electron time-of-flight spectrometers for angle-resolved measurements at the SQS Instrument at the European XFEL

A set of electron time-of-flight spectrometers for high-resolution angle-resolved spectroscopy was developed for the Small Quantum Systems (SQS) instrument at the SASE3 soft X-ray branch of the European XFEL. The resolving power of this spectrometer design is demonstrated to exceed 10 000 (E/ΔE), using the well known Ne 1s –1 3p resonant Auger spectrum measured at a photon energy of 867.11 eV at a third-generation synchrotron radiation source. At the European XFEL, a width of ~0.5 eV full width at half-maximum for a kinetic energy of 800 eV was demonstrated. It is expected that this linewidth can be reached over a broad range of kinetic energies. An array of these spectrometers, with different angular orientations, is tailored for the Atomic-like Quantum Systems endstation for high-resolution angle-resolved spectroscopy of gaseous samples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Revealing core-valence interactions in solution with femtosecond X-ray pump X-ray probe spectroscopy

Abstract Femtosecond pump-probe spectroscopy using ultrafast optical and infrared pulses has become an essential tool to discover and understand complex electronic and structural dynamics in solvated molecular, biological, and material systems. Here we report the experimental realization of an ultrafast two-color X-ray pump X-ray probe transient absorption experiment performed in solution. A 10 fs X-ray pump pulse creates a localized excitation by removing a 1 s electron from an Fe atom in solvated ferro- and ferricyanide complexes. Following the ensuing Auger–Meitner cascade, the second X-ray pulse probes the Fe 1 s → 3 p transitions in resultant novel core-excited electronic states. Careful comparison of the experimental spectra with theory, extracts +2 eV shifts in transition energies per valence hole, providing insight into correlated interactions of valence 3 d with 3 p and deeper-lying electrons. Such information is essential for accurate modeling and predictive synthesis of transition metal complexes relevant for applications ranging from catalysis to information storage technology. This study demonstrates the experimental realization of the scientific opportunities possible with the continued development of multicolor multi-pulse X-ray spectroscopy to study electronic correlations in complex condensed phase systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Insights into the Promotion with Ru of Co/TiO 2 Fischer–Tropsch Catalysts: An In Situ Spectroscopic Study

Although ruthenium is a common promoter for cobalt-based Fischer–Tropsch synthesis (FTS) catalysts, the origin of Ru promotion and promoter concentration effects remains controversial. To gain a fundamental understanding of the Ru promotion effects, we herein performed an in situ spectroscopic study by X-ray absorption spectroscopy (XAS), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS)–Auger of working Co/TiO 2 catalysts (ca. 12 wt % Co, pure anatase TiO2 phase) promoted with different amounts of Ru (0.1–1.2 wt %). At typical FTS conditions (220 °C, 20 bar, H 2 /CO = 2), the activity in terms of both metal-time-yield (MTY) and initial turnover frequency (TOF) was maximized for the catalysts promoted with 0.1–0.2 wt % Ru, for which most of the Ru was alloyed with Co in bimetallic nanoparticles. The analysis of Auger electrons evidenced that the lower (apparent) TOF of accessible Co0 sites in the absence of Ru and at Ru concentrations beyond 0.2 wt % is bridged to the development, under reaction conditions, of FTS-inactive cobalt carbide (CoC x ) and cobalt oxide (CoO x ) patches, respectively, at the outermost surface of cobalt crystallites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Engineering of Lead Selenide Quantum Dot Based Devices and Core/Shell Heterostructures

Near infrared (NIR) emitting colloidal quantum dots (QDs) such as PbSe are interesting materials for implementation in various optoelectronic devices such as solar cells, photodetectors, and radiation detectors. Material properties like size tunable emission wavelengths, facile solution processability, the possibility of carrier multiplication and Auger assisted up-conversion, and high Z number provide PbSe QDs with unique advantages over many currently available commercial materials used in these devices. In this dissertation, after an introduction to QDs in general, we first focus on synthesis of PbSe-based heterostructured QDs for study via optical spectroscopy. PbSe/CdSe QDs synthesized via cation exchange reaction were used as seeds to study the proper conditions for further CdSe or CdS shell growth. Optical spectroscopy studies show that growth of thicker CdSe shells leads to tunable visible emission, while growth of thick CdS shells can greatly increase the photoluminescence quantum yield (PLQY) observed from the intermediate CdSe shell. NIR PL lifetimes can be greatly enhanced by the growth of CdS shells, due to strong delocalization of the hole wavefunction within the PbSe core, while the electron is delocalized throughout the QD including in the CdS shell, resulting in radiative lifetimes in the tens of microseconds. Two pulse delay measurements show that Auger assisted up conversion is also taking place in these engineered QD dot heterostructures. In the sections that follow, we look at QD devices, first with a focus on novel devices fabricated from PbSe QDs, using an amine synthesis method that allows for facile in-solution ligand exchange. QD film mobilities are measured for PbSe QDs capped with various short ionic ligands. Carrier densities in PbSe QD films are calculated from C-V measurements, showing for the first time that carrier densities can be modulated by simply changing the capping ligand. vii Radiation detectors utilizing PbSe QDs capped with KI and NH4I ligands show tangible response to incident alpha radiation. Current output response to alpha radiation is dependent on strength of radiation source and amount of bias voltage applied. In the final section a critical review of hybrid layered 2D-QD photodetectors is presented. In a typical example, PbSe and PbS QDs act as the absorbing layer in phototransistor devices which utilize layered 2D materials such as graphene and transition metal dichalcogenides as transport layers. Resulting devices display high gains and improved directivities compared to QD only and 2D only devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electro-chemo-mechanical evolution of sulfide solid electrolyte/Li metal interfaces: operando analysis and ALD interlayer effects

Sulfide solid electrolytes (SE) show promise for high-performance solid-state batteries because of their high ionic conductivity and ease of processing. However, sulfide electrolytes have suffered from chemical and electrochemical instability against Li metal anodes. In this paper, we use a suite of in situ/operando microscopy and spectroscopy techniques to demonstrate that Al 2 O 3 interlayers deposited using atomic layer deposition (ALD) delay degradation at the Li/LGPS interface by modifying the solid electrolyte interphase (SEI) chemistry and morphology. Optical and scanning electron microscopy are used to rationalize the electrochemical response of the system, which is attributed to a delayed onset of mechanical degradation at the interface when ALD interlayers are used. Operando X-ray photoelectron spectroscopy demonstrates that the dynamic evolution of SEI chemistry is impacted by the presence of the ALD interlayer. In situ Auger spectroscopy and operando optical microscopy provide visual evidence of spatial heterogeneity of Li plating, which is attributed to the chemo-mechanical degradation of the ALD interphase. The implications of these observations provide valuable insights toward the development of robust interlayers for solid-state batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Site-Selective Modification of Lanthanum Oxychloride to Modulate Halide-Ion Conduction

Design principles for solid-state halide-ion conduction remain poorly defined despite the increasing importance of halide ions as charge carriers in a variety of energy storage and electrochemical computing technologies. Here, we employ a siteselective modification strategy in which aliovalent cations are preferentially introduced at the La 3+ crystallographic site of LaOCl in the 2c Wyckoff position, enabling controlled generation of chloride vacancies and modification of lattice dynamics to enhance chloride-ion conductivity. Aliovalent substitution of La 3+ with Mg 2+ , Ca 2+ , and Sr 2+ generates charge-compensating Cl vacancies while preserving the matlockite crystal structure. X-ray excited optical luminescence measurements with Dy 3+ as a reporter chromophore evidence vacancy-derived midgap electronic states and an extended energy range of radiation-less Auger electron emission corresponding to substantial modification of electronic structure and local electrostatic potentials. Ca alloying at 8−10 at. % increases the chloride-ion conductivity by three- to 4 orders of magnitude as compared to unalloyed LaOCl, whereas comparable amounts of Sr- and Mg-alloying in LaOCl imbue less pronounced conductivity enhancements. Temperature-dependent Raman spectroscopy measurements reveal that Ca- and Sr-alloying substantially soften the La−Cl sublattice and yield a more compliant crystal lattice that can deform to accommodate Cl-ion migration. Structure solutions derived from Rietveld refinements to powder Xray diffraction reveal larger O−La−Cl bond-angle deviations and enhanced out-of-plane cation displacements for Ca- and Sr-alloyed compositions as compared to Mg-alloyed LaOCl. Such local distortions enhance chloride-ion mobility by reshaping and flattening vacancy migration energy landscapes and by modulating lattice dynamics governing anion conduction. We further illustrate that coalloying of Ca with Mg and Sr induces a nonmonotonic conductivity−defect stoichiometry relationship that can be rationalized based on cooperative interactions. Together, these results establish site-selective aliovalent alloying of LaOCl as an effective route to halide-ion solid electrolytes and provide broadly generalizable design principles for site-selective modification to induce vacancy formation and lattice softening to engender facile anion transport

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Uncovering the Role of Hole Traps in Promoting Hole Transfer from Multiexcitonic Quantum Dots to Molecular Acceptors

The understanding of electronic dynamics in multiexcitonic quantum dots (QDs) is important for designing efficient systems useful in high power scenarios, such as solar concentrators and multielectron charge transfer. The multiple charge carriers within a QD can undergo undesired Auger recombination events, which rapidly annihilate carriers on picosecond time scales and generate heat from absorbed photons instead of useful work. Compared to the transfer of multiple electrons, the transfer of multiple holes has proven to be more difficult due to slower hole transfer rates. To probe the competition between Auger recombination and hole transfer in CdSe, CdS, and CdSe/CdS QDs of varying sizes, we synthesized a phenothiazine derivative with optimized functionalities for binding to QDs as a hole accepting ligand and for spectroscopic observation of hole transfer. Transient absorption spectroscopy was used to monitor the photoinduced absorption features from both trapped holes and oxidized ligands under excitation fluences where the averaged initial number of excitons in a QD ranged from ~1 to 19. We observed fluence-dependent hole transfer kinetics that last around 100 ps longer than the predicted Auger recombination lifetimes, and the transfer of up to 3 holes per QD. Theoretical modeling of the kinetics suggests that binding of hole acceptors introduces trapping states significantly different from those in native QDs passivated with oleate ligands. Holes in these modified trap states have prolonged lifetimes, which promotes the hole transfer efficiency. These results highlight the beneficial role of hole-trapping states in devising hole transfer pathways in QD-based systems under multiexcitonic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Role of weak interlayer coupling in ultrafast exciton-exciton annihilation in two-dimensional rhenium dichalcogenides

Strong interactions between excitons are a characteristic feature of two-dimensional (2D) semiconductors, determining important excitonic properties, such as exciton lifetime, coherence, and photon-emission efficiency. Rhenium disulfide (ReS 2 ), a member of the 2D transition-metal dichalcogenide (TMD) family, has recently attracted great attention due to its unique excitons that exhibit excellent polarization selectivity and coherence features. However, an in-depth understanding of exciton-exciton interactions in ReS 2 is still lacking. In this work, we used ultrafast pump-probe spectroscopy to study exciton-exciton interactions in monolayer (1L), bilayer (2L), and triple layer ReS 2 . Additionally, we directly measure the rate of exciton-exciton annihilation, a representative Auger-type interaction between excitons. It decreases with increasing layer number, as observed in other 2D TMDs. However, while other TMDs exhibit a sharp weakening of exciton-exciton annihilation between 1L and 2L, such behavior was not observed in ReS 2 . We attribute this distinct feature in ReS 2 to the relatively weak interlayer coupling, which prohibits a substantial change in the electronic structure when the thickness varies. This work not only highlights the unique excitonic properties of ReS 2 but also provides novel insight into the thickness dependence of exciton-exciton interactions in 2D systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries X: 70% surface-modified Si/C/polyvinylidine difluoride-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C/polyvinylidine difluoride/carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al Kα radiation at 1486.6 eV (0.834 01 nm). A survey spectrum together with O 1s, C 1s, and Si 2p are presented. The spectra indicate the principal core level photoelectron and Auger electron signals with only minor copper and lithium signals and show the expected silicon-carbon and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

Haasch, Richard T. (ORCID:0000000194792595)↗
DOE OSTI2022

Raman Interferometry between Autoionizing States to Probe Ultrafast Wave-Packet Dynamics with High Spectral Resolution

Photoelectron interferometry with femtosecond and attosecond light pulses is a powerful probe of the fast electron wave-packet dynamics, albeit it has practical limitations on the energy resolution. We show that one can simultaneously obtain both high temporal and spectral resolution by stimulating Raman interferences with one light pulse and monitoring the modification of the electron yield in a separate step. Applying this spectroscopic approach to the autoionizing states of argon, we experimentally resolved its electronic composition and time evolution in exquisite detail. Theoretical calculations show remarkable agreement with the observations and shed light on the light-matter interaction parameters. Using appropriate Raman probing and delayed detection steps, this technique enables highly sensitive probing and control of electron dynamics in complex systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Detection of hot electrons originating from an upper valley at ∼1.7eV above the Γ valley in wurtzite GaN using electron emission spectroscopy

Using electron emission spectroscopy, measurement and analysis were conducted on the energy distribution of vacuum emitted electrons from electrically driven InGaN/GaN green (peak wavelengths 𝜆 ≈ 515nm) light-emitting diodes (LEDs) with and without a prewell superlattice (SL). Here, we report on the detection of a high-energy upper valley at ∼ 1.7eV above the Γ valley from samples with no prewell SL. We propose that these upper valley electrons originate predominantly from trap-assisted Auger recombination (TAAR) in green LEDs, as the intensity of these peaks is found to have quadratic dependence on the carrier density 𝑛 [see Espenlaub et al., J. Appl. Phys. 126, 184502 (2019)]. The high-energy upper valley peak was not observed in the sample with a prewell SL which is attributed to gettering by the prewell SL of still unidentified impurities that act as TAAR centers.

carrier generation & recombination↗