SEARCH · Search NASA

Results for “Basins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Lunar Impact Basins: Stratigraphy, Sequence and Ages from Superposed Impact Crater Populations Measured from Lunar Orbiter Laser Altimeter (LOLA) Data

Impact basin formation is a fundamental process in the evolution of the Moon and records the history of impactors in the early solar system. In order to assess the stratigraphy, sequence, and ages of impact basins and the impactor population as a function of time, we have used topography from the Lunar Orbiter Laser Altimeter (LOLA) on the Lunar Reconnaissance Orbiter (LRO) to measure the superposed impact crater size-frequency distributions for 30 lunar basins (D ≥ 300 km). These data generally support the widely used Wilhelms sequence of lunar basins, although we find significantly higher densities of superposed craters on many lunar basins than derived by Wilhelms (50% higher densities). Our data also provide new insight into the timing of the transition between distinct crater populations characteristic of ancient and young lunar terrains. The transition from a lunar impact flux dominated by Population 1 to Population 2 occurred before the mid-Nectarian. This is before the end of the period of rapid cratering, and potentially before the end of the hypothesized Late Heavy Bombardment. LOLA-derived crater densities also suggest that many Pre-Nectarian basins, such as South Pole-Aitken, have been cratered to saturation equilibrium. Finally, both crater counts and stratigraphic observations based on LOLA data are applicable to specific basin stratigraphic problems of interest; for example, using these data, we suggest that Serenitatis is older than Nectaris, and Humboldtianum is younger than Crisium. Sample return missions to specific basins can anchor these measurements to a Pre-Imbrian absolute chronology.

Fassett, C. I.↗

NASA NTRS2014

Rewriting the Landform History of One of Africa's Three Largest Basins

The Kalahari Basin in southern Africa - one of the largest basins in Africa, along with the Congo and Chad basins - has attracted attention since David Livingstone traveled through the area in the 1840s. It is a semiarid desert with a large freshwater swampland known as the Okavango Swamp (150 km radius). This prominent megafan (a fan with radii >100 km), with its fingers of dark green forests projecting into the dun colors of the dunes of the Kalahari semi-desert, has been well photographed by astronauts over the years. The study area in the northern Kalahari basin is centered on the Okavango megafan of northwest Botswana, whose swampland has become well known as an African wildlife preserve of importance to biology and tourism alike. The Okavango River is unusual because it has deposited not one but two megafans along its course: the Okavango megafan and the Cubango megafan. The Okavango megafan is one of only three well-known megafans in Africa. Megafans on Earth were once thought to be rare, but recent research has documented 68 in Africa alone. Eleven megafans, plus three more candidates, have been documented in the area immediately surrounding the Okavango feature. These 11 megafans occupy the flattest and smoothest terrains adjacent to the neighboring upland and stand out as the darkest areas in the roughness map of the area. Megafan terrains occupy at least 200,000 sq km of the study area. The roughness map shown is based on an algorithm used first on Mars to quantify topographic roughness. Research of Earth's flattest terrains is just beginning with the aid of such maps, and it appears that these terrains are analogous to the flattest regions of Mars. Implications: 1. The variability in depositional style in each subbasin may apply Africa-wide: rift megafan length is dominated by rift width, whereas Owambo subbasin megafans are probably controlled by upland basin size; Zambezi subbasin megafans appear more like foreland basin types, with the position of the trunk river controlling size. 2. These perspectives were successfully applied to identify the largest megafan in the group (Cubango), a fan that was sufficiently overprinted by dunes and dry lakelets not to be detectable remotely. Such undertsanding can probably be applied on Mars, where Earth experience suggests megafans ought to exist. 3. Sweep angles of rivers on megafans drastically change the hydrology in some subbasins: when the Cubango and Kunene rivers were oriented to the Etosha Pan, it was probably a permanent water body. Now that the rivers are oriented away from the basin, 93 percent of the discharge area from the pan's northerly (main) source area is gone. 4. Biotic contact between major river systems was probably controlled by megafans situated on divides: various fish species that originated in the Congo basin are now found in the Upper Zambezi R., and vice versa, apparently because of river switching behavior on the Cassai megafan that has mediated migrations both to the south and the north.

Wilkinson, Justin↗

NASA NTRS2016

Megafans of the Northern Kalahari Basin

We identify eleven megafans (partial cones of fluvial sediment, >80 km radius) in the northern Kalahari Basin, using several criteria based on VIS and IR remotely sensed data and SRTM-based surface morphology reconstructions. Two other features meet fewer criteria of the form which we class as possible megafans. The northern Kalahari megafans are located in a 1700 km arc around the southern and eastern flanks of the Angola's Bié Plateau, from northern Namibia through northwest Botswana to western Zambia. Three lie in the Owambo subbasin centered on the Etosha Pan, three in the relatively small Okavango rift depression, and five in the Upper Zambezi basin. The population includes the well-known Okavango megafan (150 km), Namibia's Cubango megafan, the largest megafan in the region (350 km long), and the largest nested group (the five major contiguous megafans on the west slopes of the upper Zambezi Valley). We use new, SRTM-based topographic roughness data to discriminate various depositional surfaces within the flat N. Kalahari landscapes. We introduce the concepts of divide megafans, derived megafans, and fan-margin rivers. Conclusions. (i) Eleven megafan cones total an area of ~190,000 sq km. (ii) Different controls on megafan size operate in the three component basins: in the Okavango rift structural controls become the prime constraint on megafan length by controlling basin dimensions. Megafans in the other les constricted basins appear to conform to classic relationships fan area, slope, and feeder-basin area. (iii) Active fans occupy the Okavango rift depression with one in the Owambo basin. The rest of the population are relict but recently active fans (surfaces are relict with respect to activity by the feeder river). (iv) Avulsive behavior of the formative river-axiomatic for the evolution of megafans-has resulted in repeated rearrangements of regional drainage, with likely effects in the study area well back into the Neogene. Divide megafans comprise the majority of the identified features, some of which have delivered water and sediment alternately to neighboring basins in the course of normal avulsion activity, likely resulting in significant changes in the hydrologies of two of the study-area subbasins. (v) Paleoclimatic inferences extracted from fluvial and lacustrine sediments therefore need to take account of avulsion-driven drainage configurations, especially where these are autogenically controlled.

Wilkinson, M. J.↗

NASA NTRS2016

Identifying and Characterizing Impact Melt Outcrops in the Nectaris Basin

The Nectaris Basin is an 820-km diameter, multi-ring impact basin located on the near side of the Moon. Nectaris is a defining stratigraphic horizon based on relationships between ejecta units, giving its name to the Nectarian epoch of lunar history. Lunar basin chronology based on higher resolution LRO imagery and topography, while assigning some important basins like Serenitatis to pre-Nectarian time, were generally consistent with those previously derived. Based on this stratigraphy, at least 11 large basins formed in the time between Nectaris and Imbrium. The absolute age of Nectaris, therefore, is a crucial marker in the lunar time-stratigraphic sequence for understanding the impact flux on the Moon, and by extension, the entire inner solar system. For several decades, workers have attempted to constrain the age of the Nectaris basin through radiometric dating of lunar samples. However, there is little agreement on which samples in our collection represent Nectaris, if any, and what the correct radiometric age of such samples is. The importance of the age of Nectaris goes far beyond assigning a stratigraphic marker to lunar chronology. Several dynamical models use Nectaris as their pin date, so that this date becomes crucial in understanding the time-correlated effects in the rest of the solar system. The importance of the Nectaris basin age, coupled with its nearside, mid-latitude location, make remnants of the impact-melt sheet an attractive target for a future mission, either for in-situ dating or for sample return. We have started exploring this possibility. We have begun a consortium data-analysis effort bringing multiple datasets and analysis methods to bear on these putative impact-melt deposits to characterize their extent, elemental composition and mineralogy, maturity and geologic setting, and to identify potential landing sites that meet both operational safety and science requirements.

Nectaris Basin↗

NASA NTRS1980

Ridge systems of Caloris - Comparison with lunar basins

It has been found that the wrinkle ridge systems of the Caloris basin on Mercury display many of the traits which are characteristic of ridges in the mare-filled lunar multiring basins. The considered investigation is concerned with the ridge systems within the Caloris basin on Mercury, and implications for the origin of ridges within basins on both Mercury and the moon. The observed features are found to indicate that the early evolution of Caloris was similar to that of lunar mascon basins. The morphology of ridges within Caloris compares favorably with lunar ridges when viewed on similar resolution earth-based lunar photographs. Ridges in Caloris occur from 1000 to 1320 km diameter range, and are situated within the boundary delineated by topographic benches in the northeastern and southeastern parts of the basin. The orientation of Caloris ridges is more dominantly concentric than ridge orientations in lunar basins.

Maxwell, T. A.↗

NASA NTRS1981

Discovery of multi-ring basins - Gestalt perception in planetary science

Early selenographers resolved individual structural components of multi-ring basin systems but missed the underlying large-scale multi-ring basin patterns. The recognition of multi-ring basins as a general class of planetary features can be divided into five steps. Gilbert (1893) took a first step in recognizing radial 'sculpture' around the Imbrium basin system. Several writers through the 1940's rediscovered the radial sculpture and extended this concept by describing concentric rings around several circular maria. Some reminiscences are given about the fourth step - discovery of the Orientale basin and other basin systems by rectified lunar photography at the University of Arizona in 1961-62. Multi-ring basins remained a lunar phenomenon until the fifth step - discovery of similar systems of features on other planets, such as Mars (1972), Mercury (1974), and possibly Callisto and Ganymede (1979). This sequence is an example of gestalt recognition whose implications for scientific research are discussed.

Hartmann, W. K.↗

NASA NTRS1985

Newly Discovered Martian Impact Basins

Three previously unrecognized Martian impact basins were discovered through detailed mapping of landforms, structures and terrains near Cassini and Al Qahira basins. Al Qahira A lies on the Martian dichotomy boundary and intersects the older basin, Al Qahira. It has four rings that are expressed by a variety of landforms. Southwestward Al Qahira A is out by a younger Basin, Al Qahira B. Al Qahira B is a highly degraded basin with one identifiable ring. Its ring is expressed by a few massifs, knobs and inward-facing scarps, but is recognized by the distributions of wrinkle ridges and plains units. Cassini A lies southward of the younger Cassini Basin and is intersected by it. It probably has four rings. The importance of detailed mapping of various types of landforms and terrains to the discovery of basins on Mars are demonstrated.

Stam, M.↗

NASA NTRS1985

The materials and formation of the imbrium basin

The deposits around the Imbrium basin form a widespread stratigraphic datum, to which other lunar geological units may be relatively dated. More importantly, as a relatively well preserved multi-ring basin, Imbrium provides an important target of geologic investigation to study the processes involved in lunar basin formation and evolution. Two Apollo missions (Apollo 14 and 15) were send to landing sites chosen specifically to address problems of the Imbrium basin geology. Data about the deposits of the Imbrium basin are reviewed. Formational mechanics of lunar basins in general and the relations of materials collected at the highlands adjacent to the Apollo 15 landing site to Imbrium and other basins are examined.

Spudis, P. D.↗

NASA NTRS1994

Effects due to overlapping large impact basins on Mars

Many ancient, highly degraded large impact basins exist on Mars. In many cases these basins overlap or are overlapped by more easily observed, presumably younger, impact basins. While impact basin overlap is becoming more recognized, the effects of such overlap have only occassionally been described. Such effects will depend on a variety of factors including the absolute and relative size of the basins, the degree of overlap, the state of the lithosphere and its thermal gradient at the time of impact, and the time between impacts. There now exists enough evidence for overlapping basins of different sizes that some of these can be discussed. This paper highlights some examples of the obvious effects of basin overlap.

Frey, Herbert↗

NASA NTRS2005

The Lunar-wide Effects of the Formation of Basins on the Megaregolith

The surface of the Moon underwent an intense bombardment during the first approx.700 my of it s history (e.g. [1]). During this time at least 43 basins [1,2] and countless smaller craters were formed across the entire surface [1,3]. A quantitative assessment of the regolith as formed and modified by basins is discussed here. The formation of the basins (craters >300km in diameter) caused a significant amount of material to be excavated and redistributed across the surface of the Moon [4,5,6,7]. The material excavated by each individual basin was deposited and laterally mixed with the surrounding surface. This resulted in the development of a lunar-wide mixed zone of fragmented material, several kilometers thick [5,8,9]. This mixed zone was developed further by subsequent impacts resulting in a fragmental zone 1-2km thick called the megaregolith [10]. The initial zone of mixed material formed by the basins is not expected to be uniform across the surface of the Moon because of the varied size and random distribution of the basins. The main topographic ring of the 43 basins discussed by Wilhelms and Spudis [1,2] are illustrated in Figure 1.

Petro, . E.↗

NASA NTRS2012

Formation of South Pole-Aitken Basin as the Result of an Oblique Impact: Implications for Melt Volume and Source of Exposed Materials

The South Pole-Aitken Basin (SPA) is the largest, deepest, and oldest identified basin on the Moon and contains surfaces that are unique due to their age, composition, and depth of origin in the lunar crust [1-3] (Figure 1). SPA has been a target of interest as an area for robotic sample return in order to determine the age of the basin and the composition and origin of its interior [3-6]. As part of the investigation into the origin of SPA materials there have been several efforts to estimate the likely provenance of regolith material in central SPA [5, 6]. These model estimates suggest that, despite the formation of basins and craters following SPA, the regolith within SPA is dominated by locally derived material. An assumption inherent in these models has been that the locally derived material is primarily SPA impact-melt as opposed to local basement material (e.g. unmelted lower crust). However, the definitive identification of SPA derived impact melt on the basin floor, either by remote sensing [2, 7] or via photogeology [8] is extremely difficult due to the number of subsequent impacts and volcanic activity [3, 4]. In order to identify where SPA produced impact melt may be located, it is important to constrain both how much melt would have been produced in a basin forming impact and the likely source of such melted material. Models of crater and basin formation [9, 10] present clear rationale for estimating the possible volumes and sources of impact melt produced during SPA formation. However, if SPA formed as the result of an oblique impact [11, 12], the volume and depth of origin of melted material could be distinct from similar material in a vertical impact [13].

Petro, N. E.↗

NASA NTRS2016

Moonrise: Sampling the South Pole-Aitken Basin to Address Problems of Solar System Significance

A mission to land in the giant South Pole-Aitken (SPA) Basin on the Moon's southern farside and return a sample to Earth for analysis is a high priority for Solar System Science. Such a sample would be used to determine the age of the SPA impact; the chronology of the basin, including the ages of basins and large impacts within SPA, with implications for early Solar System dynamics and the magmatic history of the Moon; the age and composition of volcanic rocks within SPA; the origin of the thorium signature of SPA with implications for the origin of exposed materials and thermal evolution of the Moon; and possibly the magnetization that forms a strong anomaly especially evident in the northern parts of the SPA basin. It is well known from studies of the Apollo regolith that rock fragments found in the regolith form a representative collection of many different rock types delivered to the site by the impact process (Fig. 1). Such samples are well documented to contain a broad suite of materials that reflect both the local major rock formations, as well as some exotic materials from far distant sources. Within the SPA basin, modeling of the impact ejection process indicates that regolith would be dominated by SPA substrate, formed at the time of the SPA basin-forming impact and for the most part moved around by subsequent impacts. Consistent with GRAIL data, the SPA impact likely formed a vast melt body tens of km thick that took perhaps several million years to cool, but that nonetheless represents barely an instant in geologic time that should be readily apparent through integrated geochronologic studies involving multiple chronometers. It is anticipated that a statistically significant number of age determinations would yield not only the age of SPA but also the age of several prominent nearby basins and large craters within SPA. This chronology would provide a contrast to the Imbrium-dominated chronology of the nearside Apollo samples and an independent test of the timing of the lunar cataclysm.

Zeigler, R. A.↗

NASA NTRS2016

Subsurface Morphology and Scaling of Lunar Impact Basins

Impact bombardment during the first billion years after the formation of the Moon produced at least several tens of basins. The Gravity Recovery and Interior Laboratory (GRAIL) mission mapped the gravity field of these impact structures at significantly higher spatial resolution than previous missions, allowing for detailed subsurface and morphological analyses to be made across the entire globe. GRAIL-derived crustal thickness maps were used to define the regions of crustal thinning observed in centers of lunar impact basins, which represents a less unambiguous measure of a basin size than those based on topographic features. The formation of lunar impact basins was modeled numerically by using the iSALE-2D hydrocode, with a large range of impact and target conditions typical for the first billion years of lunar evolution. In the investigated range of impactor and target conditions, the target temperature had the dominant effect on the basin subsurface morphology. Model results were also used to update current impact scaling relationships applicable to the lunar setting (based on assumed target temperature). Our new temperature-dependent impact-scaling relationships provide estimates of impact conditions and transient crater diameters for the majority of impact basins mapped by GRAIL. As the formation of lunar impact basins is associated with the first approximately 700 Myr of the solar system evolution when the impact flux was considerably larger than the present day, our revised impact scaling relationships can aid further analyses and understanding of the extent of impact bombardment on the Moon and terrestrial planets in the early solar system.

Miljkovic, K.↗

NASA NTRS1974

Lunar basin formation and highland stratigraphy

Multiring impact basins, formed after solidification of the lunar crust, account for most or all premare regional deposits and structures expressed in the lunar landscape and for major topographic and gravity variations. A fresh basin has two or more concentric mountain rings, a lineated ejecta blanket, and secondary impact craters. Crackled material on the floor may be impact melt. The ejecta blanket was emplaced at least partly as a ground-hugging flow and was probably hot. A suggested model of basin formation is that the center lifts up and the rings form by inward collapse during evisceration. The resulting basin is shallow and has a central uplift of the mantle. This results in a central gravity high and a ring low. Later flooding by mare basalt has since modified most near side basins. Highland deposits of plains, furrowed and pitted terrain, and various hills, domes, and craters that were interpreted before the Apollo missions as being volcanic can now be interpreted as being basin related.

Howard, K. A.↗

NASA NTRS1976

Secondary impact craters of lunar basins

Numerous lunar features are examined and identified as being secondary to basins, that is, as having been formed by secondary impact of ejecta from basins. Most of the terra features previously attributed to volcanism and tectonism and many attributed previously to primary impact must be attributed to basin-secondary impact. Secondary craters of the Imbrium Basin cover a large part of the south-central near side. Imbrium secondaries are more numerous than primaries in the size ranges 3 or 4 to 10 km on the near side, and may be more numerous at diameters of 10-25 km. Preliminary stratigraphic dating results based on superposition relations among basin secondaries suggest that the Crisium and south Serenitatis basins are younger than Nectaris and Humboldtianum.

Wilhelms, D. E.↗

NASA NTRS1979

Smythii basin topography and comparisons with Orientale

The Smythii basin has the most extensive topographic coverage of any lunar multi-ringed basin. Topographic data are used to study the morphology and morphometry of Smythii and to make comparisons with similar basins. The depth of the basin is shown to be over 8 km, which is comparable to that of Orientale. The inner ring reaches heights of 3.4 km, while the intermediate ring exhibits little relief. Lowest points in the basin are related to mare ridges. Basin volume is estimated to be 21 million cubic kilometers. Evidence suggests that significant differences in substrate characteristics may have existed for the Smythii and Orientale impacts.

Strain, P. L.↗

NASA NTRS1981

Schiaparelli Basin, Mars - Morphology, Tectonics and infilling history

Schiaparelli Basin (an elliptical basin 460 x 400 km in diameter) is the best preserved large impact structure on Mars. Multiple periods of basin infilling by lava and eolian material can be recognized. Numerous ridges within the basin show a strong northwest-southeast orientation, consistent with a regional stress field induced by the loading of the lithosphere by Tharsis. Ridge location is, however, apparently dominated by a buried peak ring. Earth-based radar measurements of Schiaparelli indicate that the ejecta deposits are best preserved on topographic highs southeast of the basin, while eolian materials have preferentially accumulated in the lower (western) side of the basin. Lyot (215 km diameter) is believed to be a good analogue to the pre-infilled Schiaparelli, and indicates that Schiaparelli probably had an initially hummocky floor topography and both ballistic and ground-flow ejecta deposits.

Mouginis-Mark, P. J.↗

NASA NTRS1985

Average Spacing for Rings of Individual Multi-ring Basins Is 2.0(0.5)D

The mathematically regular spacing of the concentric rings of planetary impact basins are examined. It is shown that a constant radial increment of x (sub 0.5) D, where x is about 2.0 and D is ring diameter, separates adjacent statistical groups of rings and arcs of multiring basins on Mars, Mercury, and the Moon. Statistics of spacing for adjacent rings of individual basins on the three planets are presented, and single basins from ring measurements of newly-recognized basins on Mercury and Mars are revised. Analysis of ring rank: ring diameter for adjacent rings of individual basins also yields an average spacing of about 2.0 (sup 0.5) D, specifically (2.01 + or - 0.26) (sup 0.5) D.

Pike, R. J.↗