Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bonded joints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measurement of crack length in width tapered beam experiments

The width tapered beam method for measuring fracture toughness has been contemplated for use in measuring the adhesion of photovoltaic materials, is promoted by it being a viable method for use directly on modules rather than to engineered test specimens. However, precise determination of crack length is often difficult as failure often involves tendril formation, cavitation voids, and other plastic deformation at the crack front in addition to obfuscation by opaque materials. Because fracture energy varies as the square of crack length, imprecise crack tip length results in large measurement uncertainties. In this work, we develop a method to estimate the crack tip length using the relationship between the applied force and the displacement of the load frame. The crack tip is determined for every data point and can be defined from a calibration curve related to the amount of energy put into the beam, or from a theoretically idealized estimation. Once a calibration curve is set up and the equations programmed, the fracture energy as a function of position on the newly formed crack interface can be accurately estimated. The test additionally provides much easier analysis and insight into the joint failure through more precise knowledge of fracture toughness at each de-bonded area.

42 ENGINEERING↗
DOE OSTI2021

High Flux Microchannel Receiver Development (Final Report)

The opportunity addressed in this project was using microscale heat exchanger technology for improving solar thermal central receiver efficiency. This will result in smaller, less expensive components and reduce the levelized cost of electricity from concentrated solar thermal power. This micro-pin solar receiver (MSR) directly heats high pressure (25 MPa) supercritical carbon dioxide (sCO 2 ) from 550°C to 720°C with an incident flux of at least 120 W/cm 2 at a receiver efficiency of >90% (assuming availability of 95% absorptivity coating), and receiver cost target of less than $\$$150/kWt. Realization of the MSR required an understanding of thermal hydraulic performance of sCO 2 in micro-pin passages, mechanical behavior of high nickel alloys at high temperatures including joints, advanced fabrication methods of high nickel alloys (etching, machining, brazing, welding, diffusion bonding), and the cost implications of these when the concept is scaled to production volumes. The technology can be used with gases (sCO 2 , helium, etc.) or with liquids such as molten salt or liquid metal. Given the high pressure associated with sCO 2 , its use demonstrates a “worst case” scenario, and the successful development of the MSR for this application will result in the development of a technology also applicable to a range of other heat transfer fluids that will enable next generation CSP plants, including support of the Gen3CSP program.

14 SOLAR ENERGY↗
DOE OSTI2020

Parametric Design Study of a Power Electronics Package for Improving Solder Joint Reliability

The lifetime of a power electronics package is, to a large extent, determined by the reliability of its bonded interfaces under major loading conditions in an operational environment. Based on the application-level requirements of the package, bonded interface material is selected based on the results obtained from accelerated tests such as thermal cycling and power cycling. In addition to evaluating the reliability through accelerated tests, it is important to consider the impact of other component layers on the thermomechanical performance of the interface material, both from a material and geometric perspective. The co-efficient of thermal expansion (CTE) mismatch introduced by the use of different materials within a package and its structural design plays a critical role in determining the interface material reliability. In this paper, we present the results of a parametric modeling study of a power electronics package under thermal cycling in which the materials and geometric design of the different component layers were varied with respect to a baseline design to understand their impact on the reliability of the interface material. We chose the volume-averaged strain energy density per cycle computed at the corner region of the interface material as the metric for the reliability comparisons. Our results indicate that in addition to the CTE mismatch, the stiffness of individual component layers has a major impact on reliability. Among the different baseplates that we studied, aluminum silicon-carbide baseplates offered superior reliability over their copper and aluminum counterparts. We also found that the magnitude of the impact of stiffness variation—amongst the adjacent layers—on the reliability of the solder joint is dependent on the inherent CTE mismatch between the layers.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

A Combined Experimental and Modeling Approach to Investigate the Performance of Joint Between AZ31 Magnesium and Uncoated DP590 Steel Using Friction Stir-Assisted Scribe Technique

In this study, friction stir assisted scribe technique is used to achieve a viable joint between AZ31 magnesium alloy and uncoated DP590 steel. Here, the mechanical properties and performance of the joint are investigated using finite element modeling and electron microscopy. The joint strength can be ascribed to two factors, the mechanical interlocking and the metallurgical bonding of two materials at their interface. The contribution of both factors is intended, and the metallurgical bonding is studied to understand the basic joining phenomenon.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Graphene Enhanced SiC-SiC Ceramic Composite Bonding Solution for Generation IV Nuclear Reactors

The feasibility of an effective bonding methodology for SiC/SiC Ceramic Matrix composites using a graphene base brazing compound was established under pressure less conditions. The feasibility demonstration during this program identified the further need to improve the composition of the brazing compound and the processing conditions to enhance the joint strength.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Laser interference structuring of Cu for adhesive joining of HVAC equipment

Due to potential energy and cost savings benefits, adhesive joining has been recently considered for heating, ventilation, air conditioning, and refrigeration (HVAC&R) systems. HVAC adhesive bonding requires cost-effective and adequate surface preparations of adherents. Here, this article investigates the use of abrasion, traditional single-beam laser, and a laser-interference technique as surface preparations of copper surfaces. Surface morphology is characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Effective submicrometer peak-to-valley structuring with a periodicity of ∼2.7μ⁢m was demonstrated for laser-interference processing. Single-lap shear tests were conducted for 89 joints made with bondline thicknesses of 0.15 and 0.3 mm. Data on process variables and measured variables included open-time, bond length, maximum load, displacement at failure, shear lap strength, and failure mode. A statistical analysis was conducted on each lot to determine the lower limit with 95% confidence intervals for displacements at failure and shear lap strengths. A comparison is presented between the properties of laser-structured joints with respect to those prepared by abrasion, which is considered the baseline surface preparation technique. Based on this comparison, one single-beam laser technique and two laser-interference techniques were shown to exhibit vastly superior performance over the joints made with abraded specimens.

Sabau, Adrian S. [Oak Ridge National Laboratory (O↗
DOE OSTI2021

Pulsed electric current joining of oxide-dispersion-strengthened austenitic steels

The solid-state joining of oxide-dispersion-strengthened (ODS) austenitic steels was achieved using a pulsed electric current joining (PECJ) process. Microstructures of the austenitic grain structures and oxide dispersions in the joint areas were characterized using electron microscopy. Negligible grain growth was observed in austenitic grain structures, while slight coarsening of oxide dispersions occurred at a short holding time. The mechanisms of the PECJ process may involve three steps that occur simultaneously, including the sintering of mechanical alloying powders in the bonding layer, formation of oxide dispersions, and bonding of the mechanical alloying powders with the base alloy. The high hardness and irradiation resistance of ODS alloys were retained in the joint areas. This research revealed the fundamental mechanisms during the PECJ process, which is beneficial for its potential applications during the advanced manufacturing of ODS alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Light Exposure Promotes Degradation of Intermediates and Growth of Phosphine-Ligated Gold Clusters

Subnanometer clusters exhibit unique properties not observed at the bulk or nanometer scale. Many applications, however, require clusters to be monodisperse in size and composition.While substantial progress has been made empirically on producing specific-sized gold clusters using different ligands, the mechanisms of cluster formation remain insufficiently understood. Using high mass-resolution electrospray ionization mass spectrometry (ESI-MS), we characterized the formation of cationic triphenylphosphine-ligated gold clusters [Aux(PPh3)y z+] in solution. Our data provides evidence that small hydrogen-containing intermediate “building blocks” (i.e., Au2(PPh3)2H+, Au4(PPh3)4H+, and Au7(PPh3)7H5 2+) are responsible for the growth of larger gold clusters (i.e., Au6(PPh3)6 2+ and Au8(PPh3)7 2+) over several hours. In addition, intermediate degradation and cluster growth are shown to be dependent on irradiation of the reacting solution with light. Specifically, the rate of growth of large clusters is demonstrated to scale with the intensity of light exposure. Complementary theoretical calculations were also performed that provide molecular-level insight into the nature of the bonding between the hydrogens and gold atoms in the intermediate Au-phosphine clusters. Collectively, our joint experimental and theoretical findings advance the understanding of the factors at play in the size-selective synthesis of ligated gold clusters in solution.

Hewitt, Michael A.↗
DOE OSTI2025

Role of Forest Carbon Change in Shaping Future Land Use and Land Cover Change

Global change, particularly the changes in atmospheric CO 2 concentration, climatic variables, and nitrogen deposition, has been widely recognized and examined to have worldwide impacts on forest carbon. However, its influence on forest area required to meet the demand for timber and carbon storage and subsequent land use and land cover change (LULCC) is rarely studied. This study explores the role of global change-driven forest carbon change in shaping future global LULCC projections and investigates underlying drivers. We incorporated the global change impacts on forest carbon from the Canadian Land Surface Scheme Including Biogeochemical Cycles model simulations (driven by meteorological forcing projections from two Earth system models [ESMs]) into the Global Change Analysis Model, under three combinations of shared socioeconomic pathways and representative concentration pathways (SSP126, SSP370, and SSP585). Including forest carbon change decreases the projected expansion of managed forest and managed pasture, reduces the loss of unmanaged pastures and forests, and provides more cropland. The relative change in managed forest by 2100 is -4.0%, -21.7%, and -31.9%, under SSP126, SSP370, and SSP585, respectively, when forest carbon change is considered. CO 2 fertilization is the dominant driver, increasing forest vegetation and soil carbon by 37% and 4.1%, and leading to 78.6% of the total area with a change in land use types by 2100 under SSP585. In comparison, climate change reduces forest vegetation and soil carbon by -3.5% and -0.8%, influencing 23.9% of the total area with a change in land use types by 2100 under SSP585, while nitrogen deposition has minor impacts. Using meteorological forcing data from two ESMs leads to similar impacts of forest carbon change on LULCC in terms of sign and trend but different magnitudes. This study highlights the large impact of forest carbon change on shaping future LULCC dynamics and the critical role of CO 2 fertilization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Microstructural, Corrosion and Mechanical Characterization of Friction-Stir Welded Joints Between Aluminum and Magnesium Alloys

Friction Stir Welding (FSW) of Aluminum-Magnesium (Al-Mg) alloys has garnered increasing attention due to its wide-ranging applications in the automotive and aerospace industries. The microstructural, corrosion, and mechanical properties of FSW Al-Mg welds under selected conditions are critical factors that must be well-investigated to ensure their durability and performance. In this study, electrochemical tests, including Open Circuit Potential (OCP), Linear Polarization Resistance (LPR), Potentiodynamic Polarization Scan (PD), and Electrochemical Impedance Spectroscopy (EIS), have been used to analyze the corrosion resistance of these welds, along with weight loss measurements through cyclic corrosion testing (CCT) and surface evolution via SEM over an 8-week period. Mechanical properties are evaluated through microindentation, nanoindentation, fatigue, and lap-shear tests. The results of the electrochemical tests reveal that the corrosion properties of the center weld zone differ from those of the two base alloys. Indentation tests indicate that the weld zone behaves differently from the base alloys. Surprisingly, the lap shear strength did not decrease significantly even after 8 weeks of cyclic corrosion testing, indicating that the joint prevented any ingress of the electrolyte. Fatigue testing showed that applying an adhesive between the Al and Mg joint improved the fatigue life to some extent, although the corrosion resistance reduced due to the discontinuous bonding of the adhesive layer. Overall, these findings highlight the importance of investigating the corrosion and mechanical properties of FSW Al-Mg welds and provide valuable insights for future modeling works.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites

Brønsted (BAS), Lewis (LAS), and surface Brønsted (SBAS) acid sites have been investigated for polyethylene (PE) upcycling by zeolite catalysts, but there is no clear consensus regarding their catalytic roles, partly due to the complexity of the catalysts used and varying reaction conditions across studies. This work systematically determined how these sites impact PE conversion rates and product distributions by utilizing a suite of microporous MFI catalysts with varying Si/Al ratios, acid site densities, and inherent mesoporosities. PE conversion rates did not trend with total BAS or LAS densities due to a combination of internal mass transfer limitation and the apparent inability of LAS alone to cleave C–C bonds, but a strong, statistically significant correlation was present with respect to SBAS density and mesopore surface area, jointly, owing to accelerated polymer activation on external surfaces to smaller diffusion-limited chains. However, ingress of these SBAS-derived fragments ultimately remained rate limiting, as demonstrated by solid conversion rates that increased with mesopore surface area at similar SBAS density and likewise increased with SBAS density at similar mesopore surface area. In batch PE cracking reactions, light gaseous product selectivities were most sensitive to total BAS, with higher densities generally exhibiting higher selectivity to C 3 and linear C 4 –C 7 products and higher alkane/alkene product ratios, consistent with increased β-scission turnovers. Insights from this work help systematically clarify the roles of BAS, LAS, SBAS, and mesopores in PE cracking reactions and inform the development of tailored zeolite catalysts for efficient polyolefin upcycling.

accessibility↗
DOE OSTI2024

Dissimilar material joining of densified superwood to aluminum by adhesive bonding

Abstract Superwood is a densified wood product that shows promise as a lightweight and renewable alternative for metallic materials. In order for this high-performance new material to be used in multi-material products, it must be able to be joined with other major materials. For example, joining superwood to aluminum would provide a key enabling technology for its use in automotive components since aluminum is presently a major lightweight material for such applications. In this paper, a methacrylate-based adhesive has been identified to provide high lap shear strength (7.5 MPa) for aluminum-to-superwood joints. The aluminum-to-superwood samples were prepared with different amounts of pre-polishing to create openings to the pores in the superwood so adhesive could penetrate into them and create a mechanical interlock, in addition to the hydrogen/chemical bonding at the surface between the methyl methacrylate (MMA) in methacrylate-based adhesive and the cellulose in superwood. For aluminum samples, a thin layer (typically a few nanometers) of oxide film on the surfaces provides hydrogen/chemical bond to MMA structure in the adhesive layer. The failure strength of the superwood-to-aluminum joint sample is about 50% higher than that of natural wood to natural wood joint sample and comparable to that of aluminum-to-aluminum joint sample.

Automation & Control Systems↗
DOE OSTI2025

Machine learning inversion from small-angle scattering for charged polymers

We develop Monte Carlo simulations for uniformly charged polymers and a machine learning algorithm to interpret the intra-polymer structure factor of the charged polymer system, which can be obtained from small-angle scattering experiments. The polymer is modeled as a chain of fixed-length bonds, where the connected bonds are subject to bending energy, and there is also a screened Coulomb potential for charge interaction between all joints. The bending energy is determined by the intrinsic bending stiffness, and the charge interaction depends on the interaction strength and screening length. All three contribute to the stiffness of the polymer chain and lead to longer and larger polymer conformations. The screening length also introduces a second length scale for the polymer besides the bending persistence length. To obtain the inverse mapping from the structure factor to these polymer conformation and energy-related parameters, we generate a large data set of structure factors by running simulations for a wide range of polymer energy parameters. We use principal component analysis to investigate the intra-polymer structure factors and determine the feasibility of the inversion using the nearest neighbor distance. We employ Gaussian process regression to achieve the inverse mapping and extract the characteristic parameters of polymers from the structure factor with low relative error.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis, Isolation, and Study of Heterobimetallic Uranyl Crown Ether Complexes

Although crown ethers can selectively bind many metal cations, little is known regarding the solution properties of crown ether complexes of the uranyl dication, UO 2 2+ . Here, in this work, the synthesis and characterization of isolable complexes in which the uranyl dication is bound in an 18-crown-6-like moiety are reported. A tailored macrocyclic ligand, templated with a Pt(II) center, captures UO 2 2+ in the crown moiety, as demonstrated by results from single-crystal X-ray diffraction analysis. The U(V) oxidation state becomes accessible at a quite positive potential (E 1/2 ) of –0.18 V vs Fc +/0 upon complexation, representing the most positive U VI /U V potential yet reported for the UO 2 n+ core. Isolation and characterization of the U(V) form of the crown complex are also reported here; there are no prior reports of reduced uranyl crown ether complexes, but U(V) is clearly stabilized by crown chelation. Joint computational studies show that the electronic structure of the U(V) form results in significant weakening of U–O oxo bonding despite the quite positive reduction potential at which this species can be accessed, underscoring that crown-ligated uranyl species could demonstrate unique reactivity under only modestly reducing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Weld Strength and Heat Affected Zone Size in Friction Welded NFA and CostE

Friction welding (FW) enables joining of dissimilar metals parts up to the limits of their strength. CostE and NFA are two high-temperature steel alloys used in land-based power generation. These alloys were joined with FW, and the effect of process parameters on post-welded structure and tensile strength was studied. Weld energy primarily determined the heat-affected zone (HAZ) thickness in both alloys. The highest joint efficiencies – up to 96% – resulted from contact strengthening of thin NFA HAZ regions, but too thin of a HAZ resulted in an unreliable joint. Conversely, thick HAZ regions consistently lowered the weld strength. Optimal welding conditions occur with sufficient energy to create a full bond but not so much to notably lower weld strength.

friction welding, rotary friction welding, nanostr↗
DOE OSTI2025

Light control of intramolecular nuclear dynamics by vortex electron localization

In strong-field ionization of molecules, intense light pulses are thought to have a negligible direct influence on atomic nuclei. Molecular dissociation is thus expected to be determined by the geometrical configuration of the molecular ion at the ionization instant. Contrary to this picture, we observe a counterintuitive electron-proton angular correlation and the formation of proton vortices following strong-field ionization of H 2 molecules by bicircularly polarized two-color laser fields. We explain this phenomenon by the pathway interference and localization of the residual H 2 ⁡+ electron in different angular-momentum states formed in the tail of the driving laser pulse. We validate this interpretation by combining a quantum-mechanical numerical simulation of the field-driven coupled electronic-nuclear dynamics and a semiclassical-trajectory model for the phase accumulation of the laser-driven electronic-nuclear wave packet. Our joint experimental and theoretical study reveals a general picture of vortex electron localization which can be used for controlling molecular-bond breaking with circularly polarized laser fields.

Atomic & molecular processes in external fields↗
DOE OSTI2021

Coupling morphological and magnetic anisotropy for assembling tetragonal colloidal crystals

Morphological and magnetic anisotropy can be combined in colloidal assembly to create unconventional secondary structures. We show here that magnetite nanorods interact along a critical angle, depending on their aspect ratios and assemble into body-centered tetragonal colloidal crystals. Under a magnetic field, size-dependent attractive and repulsive domains develop on the ends and center of the nanorods, respectively. Our joint experiment-computational multiscale study demonstrates the presence of a critical angle in the attractive domain, which defines the equilibrium bonding states of interacting rods and leads to the formation of non–close-packed yet hard-contact tetragonal crystals. Small-angle x-ray scattering measurement attributes the perfect tetragonal phase to the slow assembly kinetics. The crystals exhibit brilliant structural colors, which can be actively tuned by changing the magnetic field direction. These highly ordered frameworks and well-defined three-dimensional nanochannels may offer new opportunities for manipulating nanoscale chemical transformation, mass transportation, and wave propagation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗