Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARBON 13”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

SPRUCE Air 13C and 14C Isotopes, Marcell Experimental Forest, Minnesota, 2016-2025

This data set reports 13C (carbon) and 14C signatures of air from Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental study plots located in the S1-Bog at the Marcell Experimental Forest in northern Minnesota from 2016-2025 (2016-04-13 to 2025-09-24). Air measurements were collected approximately five times throughout each active growing season beginning in 2016 and included the 10 SPRUCE experimental plots (Plots 4, 6, 8, 10, 11, 13, 16, 17, 19, and 20) two ambient co-located ambient plots (Plots 7 and 21) and a site at the Marcell Experiment Station’s S2-Bog meteorological station (MET) located 1.7 km northeast of the SPRUCE experimental site on the S1-Bog. Air samples were assessed for both 13C- and 14C-CO2 (carbon-carbon dioxide) signatures. 13C and 14C isotopic signatures can be used in end-member analysis and C-cycle models to track the movement of C within the experimental ecosystem, calculate turnover times within plant tissues, and to test mechanisms used in models. This dataset contains one data file in comma separate (*.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

Syntheses and characterization of isotopically labeled 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)

Synthesis and characterization of chemical analogues of TATB, where specific atoms in the structure have been isotopically substituted, are reported. 15 N, 2 H, and 18 O have replaced the naturally occurring isotope distributions in the amino and/or the nitro attendant sites and 13 C has replaced the carbon in the ring structure. A modified wet-amination method was used to produce the analogues, and the isotopic replacements were performed by selective choice of labeled precursors. Four 15 N-labeled compounds (N replaced in the amino and nitro positions), two deuterium-labeled compounds (hydrogens replaced on the amino groups), and one 13 C-labeled compound (C in the ring substituted) were synthesized of high isotopic and chemical purity. One partially labeled 18 O-labeled compound (O in the nitro position) was a result of incomplete labeling due to exchange reactions during synthesis. The compounds were characterized by various spectroscopic methods – mass spectrometry (MS), solid-state nuclear magnetic resonance (SS-NMR), infrared (FTIR), powder x-ray diffraction (PXRD), and differential scanning calorimetry (DSC), depending upon the substitution. In conclusion, these compounds have been critical to the efforts in understanding the decomposition pathways of TATB when exposed to abnormal thermal environments.

36 MATERIALS SCIENCE↗

Uranium(VI) attenuation in a carbonate-bearing oxic alluvial aquifer

Uranium minerals are commonly found in soils and sediment across the United States at an average concentration of 2–4 mg/kg. Uranium occurs in the environment primarily in two forms, the oxidized, mostly soluble uranium(VI) form, or the reduced, sparingly soluble reduced uranium(IV) form. Here we describe subsurface geochemical conditions that result in low uranium concentrations in an alluvial aquifer with naturally occurring uranium in soils and sediments in the presence of complexing ligands under oxidizing conditions. Groundwater was saturated with respect to calcite and contained calcium (78–90 mg/L) with elevated levels of carbonate alkalinity (291–416 mg/L as HCO 3 -). X-ray adsorption near edge structure (XANES) spectroscopy identified that sediment-associated uranium was oxidized as a uranium(VI) form (85%). Calcite was the predominant mineral by mass in the ultrafine fraction in uranium-bearing sediments (>16 mg/kg). Furthermore, groundwater geochemical modeling indicated calcite and/or a calcium-uranyl-carbonate mineral such as liebigite in equilibrium with groundwater. The δ 13 C (0.57‰ ± 0.15‰) was indicative of abiotic carbonate deposition. Thus, solid-phase uranium(VI) associated with carbonate is likely maintaining uranium(VI) groundwater levels below the maximum contaminant level (MCL; 30 µg/L), presenting a deposition mechanism for uranium attenuation rather than solely a means of mobilization.

54 ENVIRONMENTAL SCIENCES↗

Corynebacterium glutamicum as an Efficient Omnivorous Microbial Host for the Bioconversion of Lignocellulosic Biomass

Corynebacterium glutamicum has been successfully employed for the industrial production of amino acids and other bioproducts, partially due to its native ability to utilize a wide range of carbon substrates. We demonstrated C. glutamicum as an efficient microbial host for utilizing diverse carbon substrates present in biomass hydrolysates, such as glucose, arabinose, and xylose, in addition to its natural ability to assimilate lignin-derived aromatics. As a case study to demonstrate its bioproduction capabilities, L-lactate was chosen as the primary fermentation end product along with acetate and succinate. C. glutamicum was found to grow well in different aromatics (benzoic acid, cinnamic acid, vanillic acid, and p-coumaric acid) up to a concentration of 40 mM. Besides, 13 C-fingerprinting confirmed that carbon from aromatics enter the primary metabolism via TCA cycle confirming the presence of β-ketoadipate pathway in C. glutamicum . 13 C-fingerprinting in the presence of both glucose and aromatics also revealed coumarate to be the most preferred aromatic by C. glutamicum contributing 74 and 59% of its carbon for the synthesis of glutamate and aspartate respectively. 13 C-fingerprinting also confirmed the activity of ortho-cleavage pathway, anaplerotic pathway, and cataplerotic pathways. Finally, the engineered C. glutamicum strain grew well in biomass hydrolysate containing pentose and hexose sugars and produced L-lactate at a concentration of 47.9 g/L and a yield of 0.639 g/g from sugars with simultaneous utilization of aromatics. Succinate and acetate co-products were produced at concentrations of 8.9 g/L and 3.2 g/L, respectively. Our findings open the door to valorize all the major carbon components of biomass hydrolysate by using C. glutamicum as a microbial host for biomanufacturing.

13C-fingerprinting↗

A genetic link between leaf carbon isotope composition and whole-plant water use efficiency in the C 4 grass Setaria

Genetic selection for whole-plant water use efficiency (yield per transpiration; WUE plant ) in any crop-breeding programme requires high-throughput phenotyping of component traits of WUE plant such as intrinsic water use efficiency (WUE i ; CO 2 assimilation rate per stomatal conductance). Measuring WUE i by gas exchange measurements is laborious and time consuming and may not reflect an integrated WUE i over the life of the leaf. Alternatively, leaf carbon stable isotope composition (δ 13 C leaf ) has been suggested as a potential time-ntegrated proxy for WUE i that may provide a tool to screen for WUE plant . However, a genetic link between δ 13 C leaf and WUE plant in a C 4 species has not been well established. Thus, to confirm if there is a genetic relationship in a C 4 plant between δ 13 C leaf and WUE plant under well watered and water-limited growth conditions, a high-throughput phenotyping facility was used to measure WUE plant in a recombinant inbred line (RIL) population created between the C 4 grasses Setaria viridis and S. italica . Three quantitative trait loci (QTL) for δ 13 C leaf were found and co-localized with transpiration, biomass accumulation, and WUE plant . Additionally, WUE plant for each of the δ 13 C leaf QTL allele classes was negatively correlated with δ 13 C leaf , as would be predicted when WUE i influences WUE plant . These findings demonstrate that δ 13 C leaf is genetically linked to WUE plant , likely to be through their relationship with WUE i , and can be used as a high-throughput proxy to screen for WUE plant in these C 4 species.

59 BASIC BIOLOGICAL SCIENCES↗

Microbial extracellular polysaccharide production and aggregate stability controlled by switchgrass ( Panicum virgatum ) root biomass and soil water potential

Deep-rooting perennial grasses are promising feedstocks for biofuel production, especially in marginal soils lacking organic material, nutrients, and/or that experience significant water stress. Perennial grass roots influence surrounding soil conditions and microbial activities, and produce extracellular polymeric substances (EPS) composed primarily of extracellular polysaccharides (EPSac). These polymers can alleviate microbial moisture and nutrient stress, and enhance soil characteristics through improved water retention and aggregate stability—which may in turn enhance carbon persistence. Here, we used a 13 CO 2 greenhouse tracer experiment to examine the effect of switchgrass cultivation on EPSac production and origin in a marginal soil with five fertilization/water treatments (control, +N, +NP, +P, low water), and compared these results with measurements of field soils collected after long-term switchgrass cultivation. Soils with added nitrogen and phosphorus (+NP) had the highest root biomass, EPSac and percentage of water-stable soil aggregates. Multiple linear regression analyses revealed that root biomass and soil water potential were important determinants of soil EPSac production, potentially by controlling carbon supply and diurnal changes in moisture stress. Path analysis showed that soil aggregation was positively correlated with bulk soil EPSac content and also regulated by soil water potential. High mannose content indicated the majority of EPSac was of microbial origin and 13 CO 2 labeling indicated that 0.18% of newly fixed plant carbon was incorporated into EPSac. Analysis of field soils suggests that EPSac is significantly enhanced after long-term switchgrass cultivation. Taken as a whole, our greenhouse and field results demonstrate that switchgrass cultivation can promote microbial production of EPSac, providing a mechanism to enhance aggregation in marginal soils.

13c labeling↗

Emerging Technologies for Decarbonizing Silicon Production

Abstract Silicon (Si) is an important material for alloying, solar photovoltaics, and electronics. However, current methods of producing silicon require energy consumption of around 11–13 kWh/kg Si and direct carbon emissions are 4.7–5 tons CO 2 per ton Si which conflicts with global efforts to limit climate change. In this work, we discuss several promising methods for reducing or eliminating carbon emissions from the silicon production process. Such methods include using biocarbon, integrating the current process with carbon capture and utilization/storage (CCU/CCS), metallothermic reduction, hydrogen reduction, and molten salt electrolysis. We present the positive aspects and challenges of each approach. Biocarbon coupled with CCU/CCS is the most industrially mature technology and can be carbon–neutral or -negative but is not carbon-free. Hydrogen directly reducing silicon dioxide is not thermodynamically favorable, but it may be viable to use hydrogen in conjunction with other processes to reduce emissions. Metallothermic and electrochemical methods of production are promising and have the potential to create high-purity silicon with no reduction-related carbon emissions but have only been demonstrated at lab scale. Economic viability will likely be the next determining factor for which technologies are more widely researched and implemented. Graphical Abstract

08 HYDROGEN↗

Can We Better Constrain the Timing of GNAIW/UNADW Variability in the Western Equatorial Atlantic and Its Relationship to Climate Change During the Last Deglaciation?

We have revisited the well-trod VM28-122 core retrieved from the deep Colombian Basin, which includes sediments that reflect modern Upper North Atlantic Deep Water and extends through the last deglaciation into the last glacial period when the site was bathed in Glacial North Atlantic Intermediate Water. Here, we leverage the nearby Cariaco Basin's surface water radiocarbon reconstruction (reservoir age, and ΔR) on the IntCal20 timescale to recast the period of the last deglaciation with a newly constrained age model. Based on the revised age model, we observe that the multimillennial decrease in benthic δ 13 C and B/Ca (which record δ 13 C of dissolved inorganic carbon and Δ[CO 3 –2 ], respectively) began at 18,100 ± 240 (95% CI) calibrated years BP, synchronous with Termination 1, as identified by changes in the Antarctic Ice Sheet composite and by the onset of rapid glacier recession in the Southern Hemisphere (Denton et al., 2010, https://doi.org/10.1126/science.1184119; Denton et al., 2021, https://10.1016/j.quascirev.2020.106771). The beginning of the decrease in benthic δ 18 O is concurrent with the changes in carbon chemistry or at most, a few hundred years later. It is no later than 17,700 ± 300 (95% CI) yrs BP in our record, at the putative start of Heinrich Stadial 1. With sufficient data density (more than 2–3 control points per kyr) and an independent record of past surface water radiocarbon variations, it is possible to achieve late glacial and deglacial chronologies with fidelities similar to those of ice cores. Furthermore, doing so in more oceanographic locations should shed light more broadly on the mechanisms instrumental to abrupt climate change.

58 GEOSCIENCES↗

Total fusion yield measurements using deuterium–tritium gamma rays

The deuterium–tritium (DT) fusion reaction, D ( T , γ ) 5 He , has a rare (4.2 × 10 – 5 ) branching ratio that releases a ~16 MeV gamma ray instead of the more common 14.1 MeV fusion neutron. These fusion gamma rays can be used as a complementary source of measuring the net fusion yield of experiments. Fusion gamma rays have the advantage of having negligible Doppler broadening, being isotropic and less down-scattered compared to fusion neutrons. At the National Ignition Facility, we measured the DT fusion gamma rays by the Gamma Reaction History diagnostic that thresholds to only measure >10 MeV gamma rays. After removing a ~12% contribution from neutron capture interactions in deuterium, D ( n , γ ) T , and carbon, 12 C ( n , γ ) 13 C , the deviation between GRH measurements and neutron-based yield measurements has been reduced to 10%. Further improvements are needed for detailed physics comparison.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparative nutrient drawdown capacities of farmed kelps and implications of metabolic strategy and nutrient source

Abstract Seaweed aquaculture, particularly kelp farming, is a popular topic as a potential solution for mitigating anthropogenic pollutants and enhancing coastal drawdown of carbon and nitrogen. Using a common garden approach, this study evaluated nutrient drawdown capacities of Alaria marginata (ribbon kelp) and Saccharina latissima (sugar kelp) across four commercial kelp farms in Southeast and Southcentral Alaska. Our findings show that A. marginata exhibited ~30% more carbon and 21% more nitrogen content compared to S. latissima . These results demonstrate the potential for A. marginata to serve as a more efficient species for nutrient drawdown into farmed kelp tissues (per unit biomass) for consideration of potential mitigative actions. The efficacy of this drawdown is likely to be driven by the careful pairing of kelp species with farming environment. Temporally, there was a noted increase in carbon content and a decline in nitrogen content from March to May for both species, consistent with known seasonal nutrient dynamics in coastal waters. Notably, differences in the carbon stable isotope signatures (δ 13 C) between the kelps may hint at variations in metabolic pathways and nutrient sourcing, particularly concerning the preferential assimilation of CO 2 versus , and highlight the need for further work on this topic for applied macroalgal research.

Stephens, Tiffany↗

Photosynthetic Co-production of Succinate and Ethylene in a Fast-Growing Cyanobacterium, Synechococcus elongatus PCC 11801

Cyanobacteria are emerging as hosts for photoautotrophic production of chemicals. Recent studies have attempted to stretch the limits of photosynthetic production, typically focusing on one product at a time, possibly to minimise the additional burden of product separation. Here, we explore the simultaneous production of two products that can be easily separated: ethylene, a gaseous product, and succinate, an organic acid that accumulates in the culture medium. This was achieved by expressing a single copy of the ethylene forming enzyme (efe) under the control of P cpcB , the inducer-free super-strong promoter of phycocyanin β subunit. We chose the recently reported, fast-growing and robust cyanobacterium, Synechococcus elongatus PCC 11801, as the host strain. A stable recombinant strain was constructed using CRISPR-Cpf1 in a first report of markerless genome editing of this cyanobacterium. Under photoautotrophic conditions, the recombinant strain shows specific productivities of 338.26 and 1044.18 μmole/g dry cell weight/h for ethylene and succinate, respectively. These results compare favourably with the reported productivities for individual products in cyanobacteria that are highly engineered. Metabolome profiling and 13 C labelling studies indicate carbon flux redistribution and suggest avenues for further improvement. Our results show that S. elongatus PCC 11801 is a promising candidate for metabolic engineering.

13C isotopic labelling↗

Enhancing CO 2 Storage Complex Characterization in the Williston Basin: An Integrated Approach of Petrophysical Evaluation and Core Analysis

Conference presentation at Carbon Capture, Utilization, and Storage (CCUS) Conference 2024, Houston, Texas, March 11–13, 2024. Petrophysics and core analysis are pivotal in carbon capture and storage (CCS). An integrated workflow including conventional and advanced well logs and core analysis (CCAL and SCAL) was developed to characterize the Broom Creek Formation as the target reservoir to store CO 2 in a CCS project in North Dakota.

02 PETROLEUM↗

Getting lost tracking the carbon footprint of hydropower

In the transition to low-carbon electricity, well-quantified estimates of carbon dynamics are needed to ensure that emissions reduction targets are achieved. Here we review the state of the science on carbon accounting for hydropower reservoirs and identify limitations and future solutions. Nearly all research on reservoir greenhouse-gas (GHG) emissions has focused on individual reservoirs in isolation without considering their position in a freshwater network draining organic matter from upstream watersheds or the coordinated operation of reservoir cascades. Second, carbon inventories have extrapolated from a small, non-probabilistic sample of highly variable measurements of GHG emissions to unsampled reservoirs. A stronger statistical foundation is needed to estimate a global inventory and its uncertainty. Third, attribution to hydropower is based on ranks assigned to reservoir purpose. Instead, the physical influence of hydropower on carbon dynamics could be directly measured. Fourth, current carbon-accounting practices neglect time. A time-varying approach would quantify variation in emissions for electricity portfolios from changes in the fuel mix at different times and account for ancillary services, i.e., the ability to support the grid when variable renewables are not available without using natural gas. Reservoirs also sequester a significant portion of inflowing carbon in sediments and slow the carbon cycle by delaying the return of carbon to the atmosphere for decades to centuries. Together, these refinements would help to illuminate pathways toward meeting energy demand with the longest-possible delay in returning carbon to the atmosphere and without adding ancient sources to the pool of carbon cycling through aquatic ecosystems.

13 HYDRO ENERGY↗

Effect of additives on carbon dioxide uptake and compressive strength of dry-cast concrete

The main thrust of the work reported herein is to study the effect of chemical additives to make beneficial use of carbon dioxide in enhancing the compressive strength of dry-cast concrete. The additives used in this investigation were calcium and magnesium oxides and silicates, nickel oxide, sodium hydroxide, sodium bicarbonate and strontium chloride. The experimental results showed that both the carbonation reactions and the compressive strength of dry-cast concrete mixtures were improved when using chemical additives. Experimental investigations for optimisation were also undertaken with selected additives to further increase the carbon dioxide uptake and improve the compressive strength. The best results were obtained when using calcium silicate in combination with calcium oxide. The early-age compressive strength of specimens made from the optimised mixture increased from 9·82 MPa to 13·32 MPa, and the specimens’ carbon dioxide uptake increased from 8·76% to 10·62% of cement weight.

Construction & Building Technology↗

Drought re-routes soil microbial carbon metabolism towards emission of volatile metabolites in an artificial tropical rainforest

Drought impacts on microbial activity can alter soil carbon fate and lead to the loss of stored carbon to the atmosphere as CO 2 and volatile organic compounds (VOCs). Here we examined drought impacts on carbon allocation by soil microbes in the Biosphere 2 artificial tropical rainforest by tracking 13 C from position-specific 13 C-pyruvate into CO 2 and VOCs in parallel with multi-omics. During drought, efflux of 13 C-enriched acetate, acetone and C 4 H 6 O 2 (diacetyl) increased. These changes represent increased production and buildup of intermediate metabolites driven by decreased carbon cycling efficiency. Simultaneously, 13 C-CO 2 efflux decreased, driven by a decrease in microbial activity. However, the microbial carbon allocation to energy gain relative to biosynthesis was unchanged, signifying maintained energy demand for biosynthesis of VOCs and other drought-stress-induced pathways. Overall, while carbon loss to the atmosphere via CO 2 decreased during drought, carbon loss via efflux of VOCs increased, indicating microbially induced shifts in soil carbon fate.

59 BASIC BIOLOGICAL SCIENCES↗

Methane-derived carbon flows into host–virus networks at different trophic levels in soil

Significance The impact of soil viruses on prokaryotic hosts and their functional processes is largely unknown. While metagenomic sequencing of soil microbial communities enables identification of linkages between viruses and hosts, this does not necessarily identify contemporary interactions. To enable a detailed analysis of active virus–host interactions between individual populations, we focused on the critical biogeochemical process of methane (CH 4 ) oxidation and followed the transfer of carbon from hosts to their associated viruses in situ. Analysis of 13 C-enriched metagenomic DNA demonstrated that CH 4 -derived carbon is transferred into viral biomass via both primary and secondary utilizers of CH 4 and suggests viral predation is an important mechanism for releasing CH 4 -derived organic carbon into the soil matrix.

Lee, Sungeun↗

Multicaloric Cryocooling Using Heavy Rare-Earth Free La(Fe,Si) 13 -Based Compounds

The transition toward a carbon-neutral society based on renewable energies goes hand in hand with the availability of energy-efficient technologies. Here, magnetocaloric cooling is a very promising refrigeration technology to fulfill this role regarding cryogenic gas liquefaction. However, the current reliance on highly resource critical, heavy rare-earth-based compounds as magnetocaloric material makes global usage unsustainable. Here, we aim to mitigate this limitation through the utilization of a multicaloric cooling concept, which uses the external stimuli of isotropic pressure and magnetic field to tailor and induce magnetostructural phase transitions associated with large caloric effects. In this study, La 0.7 Ce 0.3 Fe 11.6 Si 1.4 is used as a nontoxic, low-cost, low-criticality multiferroic material to explore the potential, challenges, and peculiarities of multicaloric cryocooling, achieving maximum isothermal entropy changes up to −28 J (kg K) −1 in the temperature range from 190 K down to 30 K. Thus, the multicaloric cooling approach offers an additional degree of freedom to tailor the phase transition properties and may lead to energy-efficient and environmentally friendly gas liquefaction based on designed-for-purpose, noncritical multiferroic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗