SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The ISS Crew Transportation and Services Requirements Document (CCT-REQ-1130) contains all technical, safety, and crew health medical requirements that are mandatory for achieving a Crew Transportation System Certification that will allow for International Space Station delivery and return of NASA crew and limited cargo. Previously approved on TN23183.
The ISS Crew Transportation and Services Requirements Document (CCT-REQ-1130) contains all technical, safety, and crew health medical requirements that are mandatory for achieving a Crew Transportation System Certification that will allow for International Space Station delivery and return of NASA crew and limited cargo. Previously approved on TN38792.
Abstract An experimental apparatus for measuring the dynamic behavior of materials subjected to strain rates on the order of 10 $$^3$$ 3 s $$^{-1}$$ - 1 and temperatures up to 800°C with a unique triple actuation system is developed in this work. This system is based on the traditional Kolsky (or split-Hopkinson pressure) bar design, with the addition of an external furnace used to heat the specimen to the desired temperature. A synchronized triple pneumatic actuation system is used to control the motion and timing of the the sample, incident, and transmitted bars. The cold contact time (CCT), or the time during which the heated sample is in contact with the room temperature bars before compression, is measured experimentally and carefully controlled to minimize the development of a temperature gradient across the sample and avoid heating of the bars. Experiments are performed in conjunction with ultra high speed imaging and 2D digital image correlation (DIC), as well as high speed thermal imaging. To verify the viability of the proposed system, experiments were conducted on Ti-6Al-4V (wt.%) at temperatures from 25°C up to and 800°C at an average strain rate of approximately 1200 s $$^{-1}$$ - 1 .
Impurity elements have been added to a commercial low carbon steel grade to simulate the levels that could arise as a result of increased scrap recycling during steel production. In this study, continuous cooling transformation (CCT) diagrams were constructed for the steels with varying levels of impurities, and it is shown that impurities suppress the phase transformation across a wide range of cooling rates. It was found that a step was formed in the start temperature curve, separating the reconstructive and displacive transformations. The influence of impurities on both the reconstructive transformation and displacive transformation are discussed. Additionally, Cu precipitates were observed using scanning transmission electron microscopy (STEM) in the highest impurity-containing steel after slow cooling (0.05°C/s), fast cooling (5°C/s) and interrupted cooling. It was found that the precipitation kinetics is in the following order: cementite within the secondary phase and cementite at secondary phase-ferrite interface> ferrite grain boundaries> ferrite grain matrix. Atom-probe tomography (APT) revealed Cu precipitates formed on the surface of cementite lamellae, but not within it. This work offers insights for the phase transformation control and precipitation regulation during the thermomechanical processing of low carbon steels containing impurity elements due to scrap recycling.
AbstractThe folding nucleus (FN) initiates protein folding and enables an efficient folding pathway. Here we directly visualize the tubulin FN consisting of a nonnative, partially assembled Rossmann fold, in the closed chamber of human chaperonin TRiC. Chaperonin TRiC interacts with non-natively folded secondary structural elements, stabilizing the nucleus for transition into its first native domain. Through progressive folding, the unfolded sequence goes through drastic spatial arrangement in the TRiC chamber to sample the conformational space, mediated by the highly dynamic CCT tails. The observed presence of individual nonnative secondary structures first in the nonnative FN and then around the incrementally folded native domains supports the hypothesis that tubulin folding in TRiC is a hierarchical process of nucleation, condensation and propagation in cooperation with TRiC subunits.
Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb 3 Sn and Nb-Ti superconductors are used in the lower field region with so-called outsert coils. The attractiveness of the hybrid option lays on the fact that, on the one hand, the 20 T field level is beyond the Nb 3 Sn practical limits of 15-16 T for accelerator magnets and can be achieved only via HTS materials; on the other hand, the high cost of HTS superconductors compared to LTS superconductors makes it advantageous exploring a hybrid approach, where the HTS portion of the coil is minimized. Here we present in this paper an overview of different design options aimed at generating 20 T field in a 50 mm clear aperture. The coil layouts investigated include the Cos-theta design (CT), with its variations to reduce the conductor peak stress, namely the Canted Cos-theta design (CCT) and the Stress Management Cos-theta design (SMCT), and, in addition, the Block-type design (BL) including a form of stress management and the Common-Coil design (CC). Results from a magnetic and mechanical analysis are discussed, with particular focus on the comparison between the different options regarding quantity of superconducting material, field quality, conductor peak stress, and quench protection.
In this project, Lumileds developed a platform of high-luminance LEDs and LED light engines to increase efficacy and reduce energy consumption of directional lighting applications. The platform was developed through innovations in three key areas: (1) epi and device architectures optimized for high drive current density, breaking through the tradeoff in efficacy (lm/W) vs. emittance (lm/mm 2 ) exhibited by state-of-the-art products; (2) a compact chip-scale package allowing high packing density and thus high overall luminance in multi-emitter arrays; and (3) phosphor technology to enable correlated color temperature (CCT) tuning in multi-emitter arrays with optimized LED utilization, efficacy, color uniformity and color quality. Directional indoor and outdoor lighting applications make up a major portion of the total lighting energy consumption in the U.S, accounting for >40% of the energy savings potential of solid-state lighting. Success of this project helps accelerate the realization of these energy savings both through higher system efficacy and adoption due to new functionality, and thus contributes significantly to realizing the DOE Lighting program goals.
Tunable white Light-Emitting Diode (LED) systems that allow users to control Correlated Color Temperature (CCT) are often marketed for circadian health, which is an emerging priority in commercial office lighting. However, the energy impacts of meeting circadian criteria with standard non-tunable LEDs and with tunable white LEDs are not well understood. The goals of this project were to implement select commercial lighting systems, including tunable white LEDs, to meet visual and circadian criteria in an office environment, and to quantify lighting performance and energy usage. Most recent studies on tunable white LEDs, circadian lighting strategies, and energy impacts have relied on computer simulations and models. While little research has directly measured tunable LED energy usage for circadian criteria, EPRI has recently published results from a lab-based evaluation of illuminance, spectral output, and energy consumption for several LED products marketed for circadian performance. The research presented here contributes to the field by quantifying the performance of market-available technologies through detailed monitoring of performance parameters (such as illuminance, spectral output, glare, and energy consumption) in a physical space (an office environment).
This report documents the work I conducted during my internship as part of the Italian Summer Students program at the Fermilab National Accelerator Laboratory (FNAL). Throughout my internship, I was stationed in the Technical Division within the Fermilab laboratory, where I was under the guidance of Emanuela Barzi and co-supervised by Reed Teyber from the Lawrence Berkeley National Laboratory (LBNL). The aim of the project is the study and characterization of quench antenna signals in order gain understanding on the mechanical and electromagnetic phenomena happening inside superconductive magnets. The results presented here identify some potential areas of investigation and potential directions for improving the construction of magnetic superconductors, particularly within the framework of the CCT subscale program at LBNL.
Significance Higher prevalence of myopia is possibly associated with more extended schooling schedules. Therefore, adjustments to high school curricula may aid in reducing the prevalence of myopia among adolescents. Purpose To investigate the prevalence of myopia among 15- to 18-year-old adolescents in Tianjin, China, and to evaluate the impact of different educational schedules on the prevalence of myopia among high school students. Methods This is a school-based epidemiological study with a cross-sectional design. Ocular biological parameters and noncycloplegic photorefraction were examined using optical biometry devices and photoscreener devices. Each student’s spherical equivalent (SE) and ocular biometry were recorded, and the prevalence of myopia was calculated. Results A total of 2,867 participants (1,519 males and 1,348 females) were tested for non-cycloplegic refraction, axial length (AL), central corneal thickness (CCT), anterior chamber depth (ACD) and lens thickness (LT). In this research, the overall prevalence of myopia was 81.6%, with high myopia accounting for 11.8%. Myopia prevalence was substantially higher in general high schools than in vocational high schools, with 86.1 and 70.1%, respectively. There were no significant differences in the prevalence of myopia ( p = 0.744) or high myopia ( p = 0.851) across the three vocational school years. In the general high school, however, there was an increase of 4.6% ( p < 0.05) in myopia prevalence between year 10 and year12. Conclusion Comparing vocational and standard high school students, there are considerable disparities in prevalence of myopia, spherical equivalent, and ocular biological parameters. The prevalence of myopia and high myopia increased among standard high school students, but remained relatively consistent among students in vocational schools.
Friction stir welded (FSW) aluminum–magnesium lightweight vehicle joints have gained significant interest due to their high strength-to-weight ratio. In this work, the corrosion resistance of this material is analyzed through electrochemical tests, which include open circuit potential (OCP) inspection and potentiodynamic polarization (PD) scanning. Weight loss measurements tested the corrosion rate of the FSW weld through cyclic corrosion testing (CCT) according to the standard SAEJ 2334. Mechanical properties were also investigated, including lap-shear strength, micro- and nano-hardness mapping, and true stress–strain curves as a function of local processing history. The electrochemical results indicate that the center weld zone’s corrosion property stays between the two base alloys. Indentation-based testing demonstrated that the weld zone behaves differently from base alloys. Lap shear strength surprisingly did not drop much even after eight weeks of cyclic corrosion tests, indicating that the joint did not allow any ingress of the electrolyte.
Achieving clean energy goals will require significant advances in regard to addressing the computational needs for next-generation renewable-dominated power grids. One critical obstacle that lies in the way of transitioning today’s power grid to a renewable-dominated power grid is the lack of a faster-than-real-time stability assessment technology for operating a fast-changing power grid. This paper proposes an artificial intelligence (AI) -based method that predicts the system’s stability margin information (e.g., the frequency nadir in the frequency stability assessment and the critical clearing time (CCT) value in the transient stability assessment) directly from the system operating conditions without performing the conventional time-consuming time-domain simulations over detailed dynamic models. Since the AI method shifts the majority of the computational burden to offline training, the online evaluation is extremely fast. This paper has tested the AI-based stability assessment method using multiple dispatch cases that are converted and tuned from actual dispatch cases of the Western Electricity Coordinating Council (WECC) system model with more than 20,000 buses. The results show that the AI-based method could accurately predict the stability margin of such a large power system in less than 0.2 milliseconds using the offline-trained AI agent. Therefore, the proposed method has great potential to achieve faster-than-real-time stability assessment for practical large power systems while preserving sufficient accuracy.
The author has identified the following significant results. A classification of a portion of frame E-1016-16050 CCT was completed using the LARSYS software. The categories: row crops (corn or soybeans), forest and woodland areas, diverted acres of pastureland or nonproductive grassland areas, water (rivers), clouds, and cloud shadows, were represented by one or more spectral classes. The results of this classification are significant in that they show potential for accurate identification and delineation of forested and agricultural areas using automatic data handling techniques.
The author has identified the following significant results. One result significant as a practical application and for cost benefit analysis is the relative ease with which ERTS-1 will monitor new and unclaimed stripping activities in Southeastern Ohio and in all of Appalachia. Band 5 resolution appears to be better than the often reported 80 meters. The strip mines stand out well enough to be easily identified without other graphic aids. Standing water within the strip mined area stands out in either bands 6 or 7. Areas of several acres are visible. Significant increases in surface extent of water of stripped areas should be detectable on a comparative basis. The degree of reclamation is observable in the imagery in rather gross percentage steps and for areas larger than the bare earth sizes in the table. The gradation in tones in the different bands indicates that probability density imagery using the four bands in CCT data (and statistical processing) is likely to separate degrees of vegetative reclamation.
The author has identified the following significant results. Ground truth data have been compiled and 256 rainfall runoff events have been used to detemine coefficients for two storm runoff equations that apply to the 20 study watersheds. Two scenes have been processed using CCT data. Data pertinent to each of the study watersheds have been excerpted from the tapes. A computer program and display technique has been developed to retrieve the data from irregular shaped areas and store it in a format that allows future display of only the area desired. Means, standard deviations, and distributions have been determined for extreme dry and extreme wet conditions in the dormant season. Mean digital values show some variation between watersheds when dry, but no significant differences when wet. Standard deviations of digital values diminish drastically under wet dormant conditions. Thus the standard deviations may be a good indicator of influence of moisture. Distributions of seven bit values show that odd numbers are prevalent and irregular distribution may influence some classification schemes now in use.
The author has identified the following significant results. Preliminary acreage estimates for corn, soybeans, and other cover types made from classification of ERTS-1 data compared well with those made by the U.S. Department of Agriculture. Registration of multiple frames of ERTS-1 CCT data over Lynn County, Texas and DeKalb County, Illinois was achieved to a high degree of accuracy. Spectral/temporal computer pattern recognition analysis was carried out for the first time using satellite data.
The author has identified the following significant results. Bands 6 and 7 have fine structure as obtained by proper selection of digital levels in processing the CCT's. This is contrary to the imagery density received. This means that the small lakes can be classified in IR for different types of water masses. At least four distinct water masses have been determined for test lakes. They are shoreline, shallow water, and two deep waters. One deep water is patchy and presents difficulty in training set selection. The excellent weather and a completely successful field test form a significant happening. It required 12 orbits over the test area before perfect weather occurred.
The author has identified the following signficant results. An experiment was conducted to evaluate the feasibility of using ERTS-1 MSS imagery for spot transmission measurements on selected sites. Using the 15-unit gray scale on the 70 mm positive imagery as the base of comparison, a correlation was made between the transmittance measured at each site on the imagery and the radiance values (counts) recorded on CCT tape by the spacecraft over the same sites. The imagery was enlarged by a 750-watt projector and focused on a white cardboard screen 6 meters from the screen. Observations were made on 30 sub-sites which were pre-selected for their differing image brightness and total area; all are dried pond beds. Observations were also made on average gray backgrounds and a small lake. There was a very good correlation between the density values obtained from projected imagery and radiance values received by the detector on the spacecraft. A shorter experiment time and closer integration of gray scale and site readings would avoid the variation in lamp intensities that occurred.