Search NASA⌕ Search

SEARCH · Search NASA

Results for “CCT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Kansas environmental and resource study: A Great Plains model. Monitoring fresh water resources

The author has identified the following significant results. ERTS MSS ratios derived from CCT's are very effective for quantitative detection of suspended solid up to at least 900 ppm. The relatively high inorganic suspended solids, characteristic of midcontinent reservoirs, dominates the reflected energy present in the four MSS bands. Dissolved solids concentrations up to 500 ppm and algal nutrients up to 20 ppm are not detectable. The MSS5/MSS4 ratio may be weakly correlated with total chlorophyll above approximately 8 micrograms/liter.

Yarger, H. L.↗
NASA NTRS1975

Evaluation of ERTS-1 image sensor spatial resolution in photographic form

The author has identified the following significant results. The digital Optical Transfer Function (OTF) measurements showed the following: (1) there are no significant differences in optical performance, in terms of OTF, among all four bands of the multispectral scanner, (2) no substantial changes in the OTF's of bands 4, 5, and 6 during the period November 1972 to May 1973, and (3) comparison between the photographic and digital (CCT) two-dimensional OTF's indicated a strong asymmetry in the photographic product OTF between the MSS scan direction and across scan direction. The coherent light Fourier analysis program showed the following: (1) for agricultural areas, bands 5 and 7 of the MSS are superior in terms of image definition, and therefore mapping and acreage estimation, (2) amplitude modulation in imagery from MSS bands 4 and 5 is between 65 to 90 percent of that in corresponding bands of Apollo 9 imagery (SO65), and (3) MSS band 5 imagery has a ground resolution between 55 to 75 percent of that exhibited in the corresponding band of Apollo 9 imagery (SO65).

Slater, P. N.↗
NASA NTRS1975

Impact of remote sensing upon the planning, management, and development of water resources

Principal water resources users were surveyed to determine the impact of remote data streams on hydrologic computer models. Analysis of responses demonstrated that: most water resources effort suitable to remote sensing inputs is conducted through federal agencies or through federally stimulated research; and, most hydrologic models suitable to remote sensing data are federally developed. Computer usage by major water resources users was analyzed to determine the trends of usage and costs for the principal hydrologic users/models. The laws and empirical relationships governing the growth of the data processing loads were described and applied to project the future data loads. Data loads for ERTS CCT image processing were computed and projected through the 1985 era.

Castruccio, P. A.↗
NASA NTRS1974

Multidisciplinary geoscientific experiments in central Europe

The author has identified the following significant results. Studies were carried out in the fields of geology-pedology, coastal dynamics, geodesy-cartography, geography, and data processing. In geology-pedology, a comparison of ERTS image studies with extensive ground data led to a better understanding of the relationship between vegetation, soil, bedrock, and other geologic features. Findings in linear tectonics gave better insight in orogeny and ore deposit development for prospecting. Coastal studies proved the value of ERTS images for the updating of nautical charts, as well as small scale topographic maps. A plotter for large scale high speed image generation from CCT was developed.

Bannert, D.↗
NASA NTRS1974

Preparation of remotely-sensed image data for land use planning

Preliminary processing operations required before computer compatible tapes (CCT) can be utilized routinely to realize the full potential of ERTS imagery for rapid mensuration, quantitative estimation and for detecting and monitoring changes over time are described. Geographic referencing, geometric manipulations, classification, and association overlays (as of political boundaries) are discussed.

Bond, A. D.↗
NASA NTRS1975

The LANDSAT-1 multispectral scanner as a tool in the classification of inland lakes

Relationships between LANDSAT-1 multispectral scanner (MSS) data and the trophic status of a group of lakes in the north-northeastern part of the United States were studied by predicting the magnitudes of two trophic state indicators, estimating lake position on a multivariate trophic scale, and automatically classifying lakes according to their trophic state. Initially, the principal component ordination was employed with 100 lakes. MSS data for some 20 lakes was then extracted from computer-compatible tapes (CCT) using a binary marking technique. The output was in the form of descriptive statistics and photographic concatenations. Color ratios were incorporated into regression models for the prediction of Secchi disc transparency, chlorophyll a, and lake position on the tropic scale. Results indicate that the LANDSAT-1 system, although handicapped by low spectral and spatial resolutions as well as excessive cloud cover, can be used as a supplemental data source in lake survey programs.

Boland, D. H. P.↗
NASA NTRS1975

M-DAS: System for multispectral data analysis

M-DAS is a ground data processing system designed for analysis of multispectral data. M-DAS operates on multispectral data from LANDSAT, S-192, M2S and other sources in CCT form. Interactive training by operator-investigators using a variable cursor on a color display was used to derive optimum processing coefficients and data on cluster separability. An advanced multivariate normal-maximum likelihood processing algorithm was used to produce output in various formats: color-coded film images, geometrically corrected map overlays, moving displays of scene sections, coverage tabulations and categorized CCTs. The analysis procedure for M-DAS involves three phases: (1) screening and training, (2) analysis of training data to compute performance predictions and processing coefficients, and (3) processing of multichannel input data into categorized results. Typical M-DAS applications involve iteration between each of these phases. A series of photographs of the M-DAS display are used to illustrate M-DAS operation.

Johnson, R. H.↗
NASA NTRS1975

Interactive multi-spectral analysis of more than one Sonrai village in Niger, West Africa

Use of LANDSAT data and an interaction system is considered for identifying and measuring small scale compact human settlements (villages) for demographic and anthropological studies. Because village components are not uniformly distributed within any one village, they apparently are multimodal, spectrally. Therefore, the functions of location and enumeration are kept separate. Measurement of a known village is compared with CCT response.

Reining, P.↗
NASA NTRS1976

A LANDSAT digital image rectification system

DIRS is a digital image rectification system for the geometric correction of LANDSAT multispectral scanner digital image data. DIRS removes spatial distortions from the data and brings it into conformance with the Universal Transverse Mercator (UTM) map projection. Scene data in the form of landmarks are used to drive the geometric correction algorithms. Two dimensional least squares polynominal and spacecraft attitude modeling techniques for geometric mapping are provided. Entire scenes or selected quadrilaterals may be rectified. Resampling through nearest neighbor or cubic convolution at user designated intervals is available. The output products are in the form of digital tape in band interleaved, single band or CCT format in a rotated UTM projection. The system was designed and implemented on large scale IBM 360 computers.

Vanwie, P.↗
NASA NTRS1976

Development of a multi-disciplinary ERTS user program in the state of Ohio

The author has identified the following significant results. A preliminary comparison of the land use maps derived from high altitude photography and imagery generated from land use CCT's shows considerable correlation of data. Most land use features are best identified on LANDSAT data taken over a full year, showing the effects of the four seasons. It appears that the most cost effective and timely way of providing land use data is to use LANDSAT data for identifying 75 to 90 percent of land use categories, using temporal data. For surface mining, close examination of LANDSAT, Skylab, and aircraft data covering the same area where linears were found seems to indicate that the type of resolution characteristic of LANDSAT data results in a better definition of linears of one or more miles. Long line linears were found in the vicinity of known gas production areas in Ohio.

Baldridge, P. E.↗
NASA NTRS1975

Evaluation of ERTS multispectral signatures in relation to ground control signatures using a nested-sampling approach

The author has identified the following significant results. Ground measured spectral signatures of wavelength bands matching ERTS MSS were collected using a radiometer at several Californian and Nevadan sites, and directly compared with similar data from ERTS CCTs. The comparison was tested at the highest possible spatial resolution for ERTS, using deconvoluted MSS data, and contrasted with that of ground measured spectra, originally from 1 meter squares. In the mobile traverses of the grassland sites, these one meter fields of view were integrated into eighty meter transects along the five km track across four major rock/soil types. Suitable software was developed to read the MSS CCT tapes, to shadeprint individual bands with user-determined greyscale stretching. Four new algorithms for unsupervised and supervised, normalized and unnormalized clustering were developed, into a program termed STANSORT. Parallel software allowed the field data to be calibrated, and by using concurrently continuously collected, upward- and downward-viewing, 4 band radiometers, bidirectional reflectances could be calculated.

Lyon, R. J. P.↗
NASA NTRS1976

Earth observation image data format

A flexible format for computer compatable tape (CCT) containing multispectral earth observation sensor data is described. The driving functions which comprise the data format requirements are summarized and general data format guidelines are discussed.

Sos, J. Y.↗
NASA NTRS1977

Application of remote sensing in South Dakota to provide accurate inventories of agricultural crops, enhance contrast in photographic products, monitor rangeland habitat loss, map Aspen, and prepare hydrogeologic surveys

The author has identified the following significant results. Digital analysis of LANDSAT CCT's indicated that two discrete spectral background zones occurred among the five soil zone. K-CLASS classification of corn revealed that accuracy increased when two background zones were used, compared to the classification of corn stratified by five soil zones. Selectively varying film type developer and development time produces higher contract in reprocessed imagery. Interpretation of rangeland and cropped land data from 1968 aerial photography and 1976 LANDSAT imagery indicated losses in rangeland habitat. Thermal imagery was useful in locating potential sources of sub-surface water and geothermal energy, estimating evapotranspiration, and inventorying the land.

Myers, V. I.↗
NASA NTRS1976

A Landsat Digital Image Rectification System

DIRS is a Digital Image Rectification System for the geometric correction of Landsat Multispectral Scanner digital image data. DIRS removes spatial distortions from the data and brings it into conformance with the Universal Transverse Mercator (UTM) map projection. Scene data in the form of landmarks or Ground Control Points (GCPs) are used to drive the geometric correction algorithms. The system offers extensive capabilities for 'shade printing' to aid in the determination of GCPs. Affine, two dimensional least squares polynominal and spacecraft attitude modeling techniques for geometric mapping are provided. Entire scenes or selected quadralaterals may be rectified. Resampling through nearest neighbor or cubic convolution at user designated intervals is available. The output products are in the form of digital tape in band interleaved, single band or CCT format in a rotated UTM projection. The system was designed and implemented on large scale IBM 360 computers with at least 300-500K bytes of memory for user application programs and five nine track tapes plus direct access storage.

Van Wie, P.↗
NASA NTRS1977

A low-cost system for reception and processing of line-scan data from LANDSAT and other sources

A low-cost transportable earth resources ground station was built in Canada and installed to operational status at Shoe Cove, Newfoundland. The system concepts developed for this station provide timely availability of data in both photographic and digital form. The system was designed with several objectives in mind: (1) to provide a system which could receive, store and process line-scan image data from a wide variety of satellites, most especially the LANDSAT and NOAA (VHRR) series, as well as aircraft scanner data, and data from future remote sensing and meteorological satellites; (2) the system has been designed to be operated by a small staff and to produce black and white images and computer-compatible tapes (CCT's) of all relevant data; (3) the system is compact in its physical design so that it is possible to configure it as a self-contained ground station, housed in a 3 x 12 meter trailer; (4) the system is designed to process all data at real-time rates or better and is designed in a modular fashion so that it can be easily upgraded to do further processing of the data, and/or to handle new satellites and sensors.

Sloan, D. S.↗
NASA NTRS1976

NASA/Cousteau ocean bathymetry experiment. Remote bathymetry using high gain LANDSAT data

Satellite remote bathymetry was varified to 22 m depths where water clarity was defined by alpha = .058 1/m and bottom reflection, r(b), was 26%. High gain band 4 and band 5 CCT data from LANDSAT 1 was used for a test site in the Bahama Islands and near Florida. Near Florida where alpha = .11 1/m and r(b) = 20%, depths to 10 m were verified. Depth accuracies within 10% rms were achieved. Position accuracies within one LANDSAT pixel were obtained by reference to the Transit navigation satellites. The Calypso and the Beayondan, two ships, were at anchor on each of the seven days during LANDSAT 1 and 2 overpasses: LORAN C position information was used when the ships were underway making depth transects. Results are expected to be useful for updating charts showing shoals hazardous to navigation or in monitoring changes in nearshore topography.

Polcyn, F. C.↗
NASA NTRS1978

Photographic contrast enhancement of Landsat imagery

The effect of increased contrast of Landsat imagery is to stretch the informational content over a much greater density range. This results in greater density differences among scene features and provides a more interpretable image. The stretch required for MSS 5 and 7 is in the gamma range of 1.5 to 3.0. Several different film types, developers, and development times were used to reprocess Landsat images in a range of gammas from 1.0 to above 4.0. The gamma value to which the imagery was processed depended on the densitometric range of scene features in the image relative to the gray scale. An example of a photographically enhanced MSS 4 image is shown, in which the standard 0.94 density units was increased to 2.19 density units. The results are similar to those obtained in a computerized contrast stretch of digital CCT data, but are obtained at a far lesser cost.

Best, R. G.↗