Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMINUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The mechanical properties of as-grown noncubic organic molecular crystals assessed by nanoindentation

Organic molecular crystals are often noncubic and contain significant steric hindrance within their structure to resist dislocation motion. Plastic deformation in these systems can be imparted during processing (tableting and comminution of powders), and the defect density impacts subsequent properties and performance. This paper measured the elastic and plastic properties of representative monoclinic, orthorhombic, and triclinic molecular crystalline structures using nanoindentation of as-grown sub-mm single crystals. The variation in modulus due to in-plane rotational orientation, relative to a Berkovich tip, was approximately equal to the variation of a given crystal at a fixed orientation. The onset of plasticity occurs consistently at shear stresses between 1 and 5% of the elastic modulus in all three crystal systems, and the hardness to modulus ratio suggests conventional Berkovich tips do not generate fully self-similar plastic zones in these materials. Finally, this provides guidance for mechanical models of tableting, machining, and property assessment of molecular crystals.

36 MATERIALS SCIENCE↗

Screening analysis of enhanced weathering of igneous rocks and industrial waste materials

Enhanced weathering (EW) is a promising emerging carbon dioxide removal approach that involves harnessing and accelerating the natural weathering process by which atmospheric CO2 passively reacts with exposed alkaline minerals and is removed from the atmosphere. This manuscript reports on a screening level techno-economic analysis of EW. Two primary cases utilizing different sources of alkaline material are considered: (1) utilizing naturally occurring mined igneous rocks, and (2) utilizing industrial waste materials. The modeled EW process encompasses material purchase, comminution, transport, distribution of material on farmland, and measurement, reporting and verification of CO2 removal. Detailed sensitivities are performed to highlight promising scenarios for application. The analysis highlights that utilizing materials with high weathering potential in suitable locations may result in relatively low levelized cost of captured (less than $100 per total tonnes of CO2 captured from the atmosphere). NETL is publishing a detailed and transparent report titled “Enhanced Weathering: Techno-Economic and Life Cycle Screening Analysis” that includes more detail on the screening level techno-economic analysis and includes a life cycle analysis.

Leptinsky, Sarah [NETL Site Support Contractor, Na↗

Nanocoating for High-efficiency Industrial Hydraulic and Tooling Systems

Characterization of the AlMgB14-based coatings revealed their semi-crystalline nature; as a single phase, AlMgB 14 appears amorphous. Combining this material with TiB2 through comminution of very fine-scale powders (~100 nm), produces a bulk solid that exceeds the hardness of its respective constituent phases. Through physical vapor deposition processing, the resulting nanocomposite coating combines the wear resistance characteristic of hard materials (e.g. the AlMgB 14 ) with a regenerating lubricant. Within the top layers (10-20 nm) of the nanocomposite coating, the same TiB2 phase used to enhance the strength and provide ductility to the otherwise brittle AlMgB 14 material reacts with available oxygen to form boron oxide. As the atoms of TiB 2 continue to react, layers of boric acid begin to form at the surface. This affords an exceptionally low coefficient of friction (as low as 0.02) to the coating. Physical vapor deposition processing parameters were evaluated and optimized during the project to minimize the difficulties common to transitioning a laboratory-scale process or technology to a salable product. Coating process times and temperatures, process gas flows and ramp rates, and a number of other adjustable parameters were optimized based on the results of testing and coating characterization. The overriding goal of all of these efforts was a repeatable coating process that yields the benefits observed in the laboratory, independent of the intended product or market.

36 MATERIALS SCIENCE↗

Hydrogenated and Carbon-coated Na2Ti6O13 Nanowires as High-Rate Anode Materials for Lithium Ion Batteries

The main disadvantage for sodium titanate as an anode material for LIBs is its low electronic conductivity, resulting in poor rate capability. Several approaches have been taken in an attempt to improve the electronic conductivity of sodium/lithium titanate, such as electronic material coating/mixing, ionic doping, comminution, etc.; but as of yet there has been no uniform carbon coating reported on sodium titanate for LIBs. In this work, we detail a facile technique to create uniform thin carbon coating layers on Na2Ti6O13 nanowires (NTO-C). In addition, we also explored self-doped Ti3+ on carbon coated Na2Ti6O13 nanowires (H-NTO-C) in an effort to further improve its electronic conductivity. The detailed results of the synthesis, characterization, and electrochemical performance of the NTO-based materials (NTO, NTO-C and H-NTO-C) will be presented.

25 ENERGY STORAGE↗

Life Cycle Analysis of Enhanced Rock Weathering

This study aims to evaluate the life cycle impacts of weathering agricultural fields in the U.S. Midwest with igneous rock (dunite/olivine) and industrial waste minerals using literature and estimated data from a techno-economic analysis (TEA). The GWP impact with igneous rock and industrial waste materials ranges 34–263 and 23–180 kg CO2-eq/tonne CO2 sequestered, respectively, with comminution and transportation as the main environmental hotspots for igneous rock, and transportation for industrial waste.

Izar-Tenorio, Jorge↗

Climate-focused Life Cycle Assessments of Biochar Production by an ARTi Pyrolysis Reactor and an Air Burners CharBoss® Air Curtain Incinerator

This report presents a limited, dynamic, consequential life cycle assessment (LCA) to compare the climate impacts of two biochar production methods using wood as a feedstock. The two methods are a pyrolysis reactor supplied by ARTi (Des Moines, IA, https://www.arti.com/) and a T26 CharBoss® air curtain incinerator supplied by Air Burners, Inc. (Palm City, FL, https://airburners.com/). The underlying LCA methodology is described in a chapter by Singh et al. (2024) and implemented in the form of a workbook freely available as online Supplementary Material for the chapter. For the convenience of the reader, a pre-print version of the relevant portions of Singh et al. (2024) is attached as Appendix A to this report. Specific assumptions and calculations to obtain the input parameters used in this LCA for each production method are described in the Methodology section below. This implementation of the LCA considers emissions associated with biomass loading, comminution and conversion, biochar decay in soil, and the production and use of bioenergy generated during the conversion process. The LCA is “limited” in that upstream emissions associated with biomass production, harvest, transportation, and land-use change, as well as embodied emissions in equipment and facilities are not considered. Similarly, downstream emissions from biochar transport and incorporation into soil (i.e., tillage), and the impact of biochar soil amendments on soil greenhouse gas (GHG) emissions (other than CO 2 from biochar decay in soil), soil organic carbon stocks, crop response, and surface albedo are not considered. As the intent is to compare different biochar production methods in a simple unbiased manner, the primary alternative biomass pathway for the LCA is immaculate combustion, which is the hypothetical instantaneous and complete conversion of carbon in the biomass to CO 2 at time zero without generation of any other greenhouse gases or aerosols (GHGAs) or any useful bioenergy. Use of this pathway provides relative values for the production methods and, when the embodied emissions are similar and the same feedstock is used, these relative values are reasonable approximations for those attained with a full LCA.

09 BIOMASS FUELS↗

Reviews and syntheses: on the roles trees play in building and plumbing the critical zone

Trees, the most successful biological power plants on earth, build and plumb the critical zone (CZ) in ways that we do not yet understand. To encourage exploration of the character and implications of interactions between trees and soil in the CZ, we propose nine hypotheses that can be tested at diverse settings. The hypotheses are roughly divided into those about the architecture (building) and those about the water (plumbing) in the CZ, but the two functions are intertwined. Depending upon one's disciplinary background, many of the nine hypotheses listed below may appear obviously true or obviously false. (1) Tree roots can only physically penetrate and biogeochemically comminute the immobile substrate underlying mobile soil where that underlying substrate is fractured or pre-weathered. (2) In settings where the thickness of weathered material, H , is large, trees primarily shape the CZ through biogeochemical reactions within the rooting zone. (3) In forested uplands, the thickness of mobile soil, h , can evolve toward a steady state because of feedbacks related to root disruption and tree throw. (4) In settings where h \11 H and the rates of uplift and erosion are low, the uptake of phosphorus into trees is buffered by the fine-grained fraction of the soil, and the ultimate source of this phosphorus is dust. (5) In settings of limited water availability, trees maintain the highest length density of functional roots at depths where water can be extracted over most of the growing season with the least amount of energy expenditure. (6) Trees grow the majority of their roots in the zone where the most growth-limiting resource is abundant, but they also grow roots at other depths to forage for other resources and to hydraulically redistribute those resources to depths where they can be taken up more efficiently. (7) Trees rely on matrix water in the unsaturated zone that at times may have an isotopic composition distinct from the gravity-drained water that transits from the hillslope to groundwater and streamflow. (8) Mycorrhizal fungi can use matrix water directly, but trees can only use this water by accessing it indirectly through the fungi. (9) Even trees growing well above the valley floor of a catchment can directly affect stream chemistry where changes in permeability near the rooting zone promote intermittent zones of water saturation and downslope flow of water to the stream. By testing these nine hypotheses, we will generate important new cross-disciplinary insights that advance CZ science.

54 ENVIRONMENTAL SCIENCES↗

Engineered plant biomass feedstock particles

A novel class of flowable biomass feedstock particles with unusually large surface areas that can be manufactured in remarkably uniform sizes using low-energy comminution techniques. The feedstock particles are roughly parallelepiped in shape and characterized by a length dimension (L) aligned substantially with the grain direction and defining a substantially uniform distance along the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L. The particles exhibit a disrupted grain structure with prominent end and surface checks that greatly enhances their skeletal surface area as compared to their envelope surface area. The L.times.H dimensions define a pair of substantially parallel side surfaces characterized by substantially intact longitudinally arrayed fibers. The W.times.H dimensions define a pair of substantially parallel end surfaces characterized by crosscut fibers and end checking between fibers. The L.times.W dimensions define a pair of substantially parallel top surfaces characterized by some surface checking between longitudinally arrayed fibers. At least 80% of the particles pass through a 1/4 inch screen having a 6.3 mm nominal sieve opening but are retained by a No. 10 screen having a 2 mm nominal sieve opening. The feedstock particles are manufactured from a variety of plant biomass materials including wood, crop residues, plantation grasses, hemp, bagasse, and bamboo.

09 BIOMASS FUELS↗

Engineered plant biomass feedstock particles

A novel class of flowable biomass feedstock particles with unusually large surface areas that can be manufactured in remarkably uniform sizes using low-energy comminution techniques. The feedstock particles are roughly parallelepiped in shape and characterized by a length dimension (L) aligned substantially with the grain direction and defining a substantially uniform distance along the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L. The particles exhibit a disrupted grain structure with prominent end and surface checks that greatly enhances their skeletal surface area as compared to their envelope surface area. The L.times.H dimensions define a pair of substantially parallel side surfaces characterized by substantially intact longitudinally arrayed fibers. The W.times.H dimensions define a pair of substantially parallel end surfaces characterized by crosscut fibers and end checking between fibers. The L.times.W dimensions define a pair of substantially parallel top surfaces characterized by some surface checking between longitudinally arrayed fibers. The feedstock particles are manufactured from a variety of plant biomass materials including wood, crop residues, plantation grasses, hemp, bagasse, and bamboo.

09 BIOMASS FUELS↗

Application of Buckmaster Electrolyte Ion Leakage Test to Woody Biofuel Feedstocks

In an earlier ASABE paper, Buckmaster reported that ion conductivity of biomass leachate in aqueous solution was directly correlated with activity access to plant nutrients within the biomass materials for subsequent biological or chemical processing. The Buckmaster test involves placing a sample of the particles in a beaker of constant-temperature deionized water and monitoring the change in electrical conductivity over time. We adapted the Buckmaster method to a range of woody biomass and other cellulosic bioenergy feedstocks. Our experimental results suggest differences of electrolyte leakage between differently processed woody biomass particles may be an indicator of their utility for conversion in bioenergy processes. This simple assay appears to be particularly useful to compare different biomass comminution techniques and particle sizes for biochemical preprocessing.

09 BIOMASS FUELS↗

Methods of forming triuranium disilicide structures, and related fuel rods for light water reactors

A method of forming a triuranium disilicide structure comprises forming a mixture comprising uranium particles and silicon particles. The mixture is pressed to form a compact comprising the uranium particles and the silicon particles. The compact is subjected to an arc melting process to form a preliminary triuranium disilicide structure. The preliminary triuranium disilicide structure is subjected to a comminution process to form a fine triuranium disilicide powder. The fine triuranium disilicide powder is pressed to form a green triuranium disilicide structure. The green triuranium disilicide structure is then sintered. Additional methods of forming a triuranium disilicide structure are also described, as are fuel rods for light water reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NbFeSb based half-heusler thermoelectric materials and methods of fabrication and use

A thermoelectric half-Heusler material comprising niobium (Nb), iron (Fe) and antimony (Sb) wherein the material comprises grains having a mean grain size less than one micron. A method of making a nanocomposite half-Heusler thermoelectric material includes melting constituent elements of the thermoelectric material to form an alloy of the thermoelectric material, comminuting (e.g., ball milling) the alloy of the thermoelectric material into nanometer scale mean size particles, and consolidating the nanometer size particles to form the half-Heusler thermoelectric material comprising at least niobium (Nb), iron (Fe) and antimony (Sb) and having grains with a mean grain size less than one micron.

Joshi, Giri↗

NbFeSb-based half-heusler thermoelectric materials and methods of making

A thermoelectric half-Heusler material comprising niobium (Nb), iron (Fe) and antimony (Sb) wherein the material comprises grains having a mean grain size less than one micron. A method of making a nanocomposite half-Heusler thermoelectric material includes melting constituent elements of the thermoelectric material to form an alloy of the thermoelectric material, comminuting (e.g., ball milling) the alloy of the thermoelectric material into nanometer scale mean size particles, and consolidating the nanometer size particles to form the half-Heusler thermoelectric material comprising at least niobium (Nb), iron (Fe) and antimony (Sb) and having grains with a mean grain size less than one micron.

36 MATERIALS SCIENCE↗

FRICTION AND PERMEABILITY EVOLUTION OF FRACUTRES AND FAULTS DURING STATIC REPOSE AND DYNAMIC REACTIVATION

The co-evolution of fault/fracture friction and permeability represent important science/engineering challenges impacting natural and engineered systems. Friction directly controls the characteristics of natural fault slip, including inter-seismic healing, slow creep and earthquake rupture. Permeability evolution during fault slip and repose illuminates our understanding of perturbations to the earthquake-modulated natural hydraulic system and of subsurface engineering in recovering both shale gas and geothermal energy and in the safe subsurface sequestration of CO2. However, mechanisms controlling the evolution of friction and permeability during slow slip, fast rupture and inter-event repose are not clearly understood. For instance, the evolution of stick-slip amplitudes and recurrence, the role of inertia and its influence on frictional stability and the interdependence of these processes remain unclear. Furthermore, mechanisms of permeability evolution during the earthquake cycle (repose through rupture) are also poorly understood since they are influenced in a complex way by chemo-mechanical effects such as elastic/plastic compaction, shear comminution, mechanical dilation, pressure solution and stress corrosion. In this study, we explore fracture friction and permeability evolution during static and dynamic reactivation using both numerical and experimental approaches. This is described in the four chapters of this dissertation.

58 GEOSCIENCES↗

Methods of forming densified biomass

A method includes densifying a biomass feedstock having a moisture content of at least about 30% by weight and drying the biomass feedstock to form a densified biomass having a moisture content of less than about 10% by weight. Some methods include comminuting a biomass feedstock, pressing the biomass feedstock to form a plurality of pellets, heating the plurality of pellets to remove water therefrom, and cooling the plurality of dried pellets. The plurality of pellets exhibits a moisture content of at least about 20% by weight after pressing. The plurality of dried pellets exhibits a moisture content of less than about 10% by weight. A system for forming densified biomass may include a preheater, a press, and a dryer.

09 BIOMASS FUELS↗

Biomass Attributes and Attribute Modifications Affecting Systems and Methods to Separate and Fractionate

Chemical and physical heterogeneity in biomass feedstocks such as agricultural or forestry residues is due to substantial differences in plant tissue types. These differences can contribute significant challenges to handling, preprocessing, and conversion in biorefining processes. An understanding of this chemical and physical heterogeneity can be used to inform fractionation technologies that could facilitate more streamlined processing and potentially be employed to yield multiple co-product streams for a single feedstock. In this chapter, the motivation and scope of biomass fractionation is first outlined. Physical and chemical properties of biomass feedstocks, along with their distribution and diversity within plants, are next discussed with respect to how these differences can be exploited in a fractionation process. A summary of some of the key physical principles that allow for fractionation is next covered along with how these physical principles are exploited in equipment designs. Examples from the literature are briefly discussed that highlight how these approaches can be employed to achieve processing objectives. Several case studies on physical fractionation of corn stover and forestry residues are presented that illustrate how integrated fractionation processes could be employed. Lastly, prospects and potential economic drivers for adoption of biomass fractionation technologies are discussed.

09 BIOMASS FUELS↗

Minimally Invasive Treatment of Giant Haemangiomas of the Liver: Embolisation With Bleomycin

Purpose: The management of patients with giant haemangioma of the liver remains controversial. Although the usual treatment method for symptomatic giant haemangioma is surgery, the classical paradigm of operative resection remains. In this study, we evaluated the symptomatic improvement and size-reduction effect of embolisation with bleomycin mixed with lipiodol for the treatment of symptomatic giant hepatic haemangioma. Methods: This study included 26 patients [21 female, five male; age 41–65 years (mean 49.83 ± 1.53)] with symptomatic giant haemangioma unfit for surgery and treated with selective embolisation by bleomycin mixed with lipiodol. The patients were followed-up (mean 7.4 ± 0.81 months) clinically and using imaging methods. Statistical analysis was performed using SPSS version 16.0, and p < 0.05 was considered to indicate statistical significance. Results: Embolisation of 32 lesions in 26 patients was performed. The mean volume of the haemangiomas was 446.28 ± 88 cm{sup 3} (range 3.39–1559 cm{sup 3}) before intervention and 244.43 ± 54.38 cm{sup 3} (range 94–967 cm{sup 3}) after intervention. No mortality or morbidity related to the treatment was identified. Symptomatic improvement was observed in all patients, and significant volume reduction was achieved (p = 0.001). Conclusion: The morbidity of surgical treatment in patients with giant liver hemangioma were similar to those obtained in patients followed-up without treatment. Therefore, follow-up without treatment is preferred in most patients. Thus, minimally invasive embolisation is an alternative and effective treatment for giant symptomatic haemangioma of the liver.

62 RADIOLOGY AND NUCLEAR MEDICINE↗